encoding name is required in the caps and is a better fit for autoplugging than
the pt value. Hardware manufacturers have a bad habit of skimming through RFCs
and in this case; use unassigned numbers for encoders instead of dynamic
numbers.
In essence, this patch will add support for a lot of Bosch hardware encoders
without breaking autoplugging.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=639292
These will be picked automatically based on downstream caps now, so
if you want the depayloader to output a specific format, make sure
the element downstream advertises that preference or use a capsfilter
after the depayloader to force it.
Some h264 payloaders are unfortunately buggy and don't correctly set the
E bit in FU-A NAL when they have ended. Work around this by assuming
such a fragmentation unit has ended when there was no packet loss and a
new NAL is started
... which is particularly needed when merging NAL units, where not resetting
would lead to output of an older (pre-flush) AU (with unintended timestamp).
... thereby (partially) deprecating properties currently controlling whether
or not byte-stream output or NAL/AU alignment (though properties still determine
fallback if nothing specified in caps).
Fixes#606662.
Only set the delta flag when all of the units in the packet are delta units.
Based on patch from Olivier Crête <olivier.crete@collabora.co.uk>
Fixes#632945
... which evidently makes (most) sense if output buffers are
actually frames.
Partially based on a patch by
Miguel Angel Cabrera <mad_aluche at hotmail.com>
Fixes#609658.
in rtph264depay.c, lines 577-576, NALU-type 24 (Single-Time Aggregation
Packet) is handled in fall-through as NALU-type 26 (unhandled).
This leads high quality h264 streams such as:
rtsp://stream.yle.mobi/yle/areena/MEDIA_E0342657_p3.mp4
to fail with "NAL unit type 24 not supported yet" (but it's actually
supported), and thus to close any stream which contains STAPs.
The proposed one-liner patch fixes the issue.
Fixes#615051.
Original commit message from CVS:
* gst/rtp/gstrtpL16depay.c: (gst_rtp_L16_depay_setcaps),
(gst_rtp_L16_depay_process):
Check if clock-rate and channels are valid.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpL16pay.c: (gst_rtp_L16_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpac3depay.c: (gst_rtp_ac3_depay_setcaps),
(gst_rtp_ac3_depay_process):
Don't ignore the return value of set_caps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtpamrdepay.c: (gst_rtp_amr_depay_setcaps),
(gst_rtp_amr_depay_process):
* gst/rtp/gstrtpamrdepay.h:
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set output caps on the buffers, the base class does that for
us.
The subclass will make sure we are negotiated.
* gst/rtp/gstrtpdvdepay.c: (gst_rtp_dv_depay_setcaps),
(gst_rtp_dv_depay_process), (gst_rtp_dv_depay_reset):
* gst/rtp/gstrtpdvdepay.h:
Clean up caps negotiation.
The subclass will make sure we are negotiated.
* gst/rtp/gstrtpg726depay.c: (gst_rtp_g726_depay_setcaps),
(gst_rtp_g726_depay_process):
Clean up caps negotiation.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpg729depay.c: (gst_rtp_g729_depay_init),
(gst_rtp_g729_depay_setcaps), (gst_rtp_g729_depay_process):
* gst/rtp/gstrtpg729depay.h:
The subclass will make sure we are negotiated.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpgsmdepay.c: (gst_rtp_gsm_depay_setcaps),
(gst_rtp_gsm_depay_process):
Clean up caps negotiation.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpgsmpay.c: (gst_rtp_gsm_pay_setcaps):
Clean up caps negotiation.
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtph263depay.c: (gst_rtp_h263_depay_setcaps),
(gst_rtp_h263_depay_process):
Clean up caps negotiation.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtph263pay.c: (gst_rtp_h263_pay_setcaps),
(gst_rtp_h263_pay_flush), (gst_rtp_h263_pay_handle_buffer):
* gst/rtp/gstrtph263pay.h:
Don't ignore the return value of set_outcaps.
Do some more timestamps.
* gst/rtp/gstrtph263pdepay.c: (gst_rtp_h263p_depay_setcaps),
(gst_rtp_h263p_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtph263ppay.c: (gst_rtp_h263p_pay_class_init),
(gst_rtp_h263p_pay_setcaps), (gst_rtp_h263p_pay_flush),
(gst_rtp_h263p_pay_handle_buffer):
* gst/rtp/gstrtph263ppay.h:
Don't ignore the return value of set_outcaps.
Do some more timestamps.
* gst/rtp/gstrtph264depay.c: (gst_rtp_h264_depay_setcaps),
(gst_rtp_h264_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
Fix possible caps leak.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtph264pay.c: (gst_rtp_h264_pay_setcaps):
Add some more debug info.
* gst/rtp/gstrtpilbcdepay.c: (gst_rtp_ilbc_depay_setcaps),
(gst_rtp_ilbc_depay_process):
Clean up caps negotiation.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpilbcpay.c: (gst_rtpilbcpay_sink_setcaps):
Clean up caps negotiation.
* gst/rtp/gstrtpmp1sdepay.c: (gst_rtp_mp1s_depay_setcaps),
(gst_rtp_mp1s_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set caps on buffers, subclass does that for us.
* gst/rtp/gstrtpmp2tdepay.c: (gst_rtp_mp2t_depay_setcaps),
(gst_rtp_mp2t_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set caps on buffers, subclass does that for us.
* gst/rtp/gstrtpmp4adepay.c: (gst_rtp_mp4a_depay_setcaps),
(gst_rtp_mp4a_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtpmp4apay.c: (gst_rtp_mp4a_pay_new_caps),
(gst_rtp_mp4a_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpmp4gdepay.c: (gst_rtp_mp4g_depay_setcaps),
(gst_rtp_mp4g_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set caps on buffers, subclass does that for us.
* gst/rtp/gstrtpmp4gpay.c: (gst_rtp_mp4g_pay_finalize),
(gst_rtp_mp4g_pay_new_caps), (gst_rtp_mp4g_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpmp4vdepay.c: (gst_rtp_mp4v_depay_setcaps),
(gst_rtp_mp4v_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set caps on buffers, subclass does that for us.
* gst/rtp/gstrtpmp4vpay.c: (gst_rtp_mp4v_pay_new_caps),
(gst_rtp_mp4v_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpmpadepay.c: (gst_rtp_mpa_depay_setcaps),
(gst_rtp_mpa_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpmpapay.c: (gst_rtp_mpa_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpmpvdepay.c: (gst_rtp_mpv_depay_setcaps),
(gst_rtp_mpv_depay_process):
Clean up caps negotiation.
Actually set output caps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtpmpvpay.c: (gst_rtp_mpv_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtppcmadepay.c: (gst_rtp_pcma_depay_setcaps),
(gst_rtp_pcma_depay_process):
Clean up caps negotiation.
Set output buffer duration because we can.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtppcmapay.c: (gst_rtp_pcma_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtppcmudepay.c: (gst_rtp_pcmu_depay_setcaps),
(gst_rtp_pcmu_depay_process):
Clean up caps negotiation.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtppcmupay.c: (gst_rtp_pcmu_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpspeexdepay.c: (gst_rtp_speex_depay_init),
(gst_rtp_speex_depay_setcaps), (gst_rtp_speex_depay_process):
Clean up caps negotiation.
Set output caps on the pad and header buffers.
Set duration on output buffers because we can.
* gst/rtp/gstrtpspeexpay.c: (gst_rtp_speex_pay_parse_ident):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpsv3vdepay.c: (gst_rtp_sv3v_depay_setcaps),
(gst_rtp_sv3v_depay_process):
Clean up caps negotiation.
No need to validate the buffer, the base class does that for us.
No need to set caps out output buffers, subclass does that.
* gst/rtp/gstrtptheoradepay.c: (gst_rtp_theora_depay_setcaps),
(gst_rtp_theora_depay_process):
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtptheorapay.c: (gst_rtp_theora_pay_class_init),
(gst_rtp_theora_pay_flush_packet), (encode_base64),
(gst_rtp_theora_pay_finish_headers), (gst_rtp_theora_pay_parse_id),
(gst_rtp_theora_pay_handle_buffer):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpvorbisdepay.c: (gst_rtp_vorbis_depay_setcaps),
(gst_rtp_vorbis_depay_process):
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtpvorbispay.c: (gst_rtp_vorbis_pay_finish_headers):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpvrawdepay.c: (gst_rtp_vraw_depay_setcaps):
Clean up caps negotiation, don't ignore setcaps return.
* gst/rtp/gstrtpvrawpay.c: (gst_rtp_vraw_pay_setcaps):
Don't ignore the return value of set_outcaps.
