Commit graph

21 commits

Author SHA1 Message Date
Víctor Manuel Jáquez Leal
4b3baab40a kmssink: post error message if start() fails
It is expected to post an error message in the bus if the device cannot
be started.
2016-11-30 20:13:55 +01:00
Michael Tretter
649364b923 kmssink: configure display mode during set_caps
Configure the display mode when setting the negotiated caps instead of
during showing the first frame.

A framebuffer is required to set the mode. Allocate a buffer object
according to the negotiated caps and use it to set the mode. This buffer
object cannot be freed until another page flip happened on the crtc
(i.e., until the first frame is rendered).

https://bugzilla.gnome.org/show_bug.cgi?id=773473

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
2016-11-30 20:13:55 +01:00
Michael Tretter
dff77fd15f kmssink: add parameter force-modesetting
The force-modesetting parameter forces the kmssink to ignore already
configured display modes, to configure the display mode itself and use
the base plane for output.

https://bugzilla.gnome.org/show_bug.cgi?id=773473
2016-11-30 20:13:55 +01:00
Michael Tretter
3d0c5dd58e kmssink: allow only supported resolutions
If the input buffers have a different size than the display, the frames
would have to be scaled or positioned on the display. The kmssink cannot
decide which behaviour would be appropriate for which use case.

In order to avoid scaling or positioning of the input stream, allow only
the supported connector resolutions in the sink caps.

https://bugzilla.gnome.org/show_bug.cgi?id=773473

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
2016-11-30 20:13:55 +01:00
Michael Tretter
ca96cc6083 kmssink: set mode based on framebuffer configuration
Displays usually support multiple modes. Therefore, the kmssink should
not only support the preferred mode, but any mode that is supported by
the display.

https://bugzilla.gnome.org/show_bug.cgi?id=773473
2016-11-30 20:13:55 +01:00
Michael Tretter
f52baadd1e kmssink: add mode setting and base plane rendering
The kmssink assumed that the mode was already set by another application
and used an overlay plane for displaying the frames.

Use the preferred mode of the monitor and render to the base plane if
the crtc does not have a valid mode.

https://bugzilla.gnome.org/show_bug.cgi?id=773473

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
2016-11-30 20:13:55 +01:00
Michael Tretter
b52c39e1c7 kmssink: remove custom gst_kms_sink_get_times
The default get_times() function of the base sink is just fine.

Remove the custom get_times() function, because the default function
already reads the timestamps from the buffers.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>

https://bugzilla.gnome.org/show_bug.cgi?id=773473
2016-11-10 15:57:24 +01:00
Nicolas Dufresne
753c423784 kmssink: Scale up to the screen dimension
In most display sink, the logic is to use as much as possible
of the given window. In this case, the window is the screen,
hence it's logical to scale up.

https://bugzilla.gnome.org/show_bug.cgi?id=767422
2016-09-08 13:23:35 -04:00
Nicolas Dufresne
37c670e235 kmssink: Fix selection of source region
The source region was scaled for display before being passed
to drmModeSetPlane, which resulted in a portion of the video
being cropped. While when crop meta was present, the rectangle
was not centered since we where using unscaled width/height.

https://bugzilla.gnome.org/show_bug.cgi?id=767422
2016-09-08 13:23:35 -04:00
Nicolas Dufresne
f03fc663ef kmssink: Fix offsets handling
The calculation of the offset table was done base on a plane size
estimation. This does not always work. Instead, use memory offset the
same we as it's implement in GstVideoMeta map functions.
2016-07-11 12:07:04 -04:00
Javier Martinez Canillas
34c88dca2d kmssink: fallback to universal planes if no overlay plane is found
Without setting the DRM_CLIENT_CAP_UNIVERSAL_PLANES capability bit, only
overlay planes are made available for compatibility with legacy clients.

But if a CRTC doesn't have an overlay plane associated, then kmssink is
not able to find a plane for the CRTC and the pipeline will fail, i.e:

ERROR                kmssink gstkmssink.c:482:gst_kms_sink_start:<kmssink0> Could not find a plane for crtc

If no overlay planes were found for a given CRTC, fallback to universal
planes so DRM will also return primary planes that can be used instead.

https://bugzilla.gnome.org/show_bug.cgi?id=768183

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-06-30 11:54:37 +02:00
Javier Martinez Canillas
c2cd60db0f kmssink: add a plane-id property
Without setting the DRM_CLIENT_CAP_UNIVERSAL_PLANES capability bit, only
overlay planes are made available for compatibility with legacy clients.

But if a CRTC doesn't have an overlay plane associated, then kmssink is
not able to find a plane for the CRTC and the pipeline will fail, i.e:

ERROR                kmssink gstkmssink.c:482:gst_kms_sink_start:<kmssink0> Could not find a plane for crtc

This patch adds a plane-id property to the kmssink element so a specific
plane can be used in case that a CRTC has only a primary plane associated.

https://bugzilla.gnome.org/show_bug.cgi?id=768183
2016-06-30 11:54:36 +02:00
Víctor Manuel Jáquez Leal
3b872650aa kmssink: frame copy log in performance category
Log the message when the frame is going to be copy (worse case) under the
performance log category.

https://bugzilla.gnome.org/show_bug.cgi?id=766466
2016-05-23 22:06:29 +02:00
Víctor Manuel Jáquez Leal
e87772dd4c kmssink: use trace level for buffer render log
Instead of using debug level for logging each buffer rendered, use trace
level.

https://bugzilla.gnome.org/show_bug.cgi?id=766466
2016-05-23 22:06:29 +02:00
Guillaume Desmottes
7ffe5da49f kmssink: chain up finalize method
https://bugzilla.gnome.org/show_bug.cgi?id=766597
2016-05-19 15:29:15 -04:00
Philipp Zabel
b2c58d3bc5 kmssink: add sync support for secondary pipes
The vblank event request must specify the crtc for which to request
the event. This fixes kmssink synchronisation for crtcs other than
the first.

https://bugzilla.gnome.org/show_bug.cgi?id=765064
2016-04-19 11:10:49 +02:00
Víctor Manuel Jáquez Leal
7d06cf3297 kmssink: keep last rendered buffer in memory
https://bugzilla.gnome.org/show_bug.cgi?id=761059
2016-04-11 19:57:48 +02:00
Víctor Manuel Jáquez Leal
b29f7d048c kmssink: wait for page flip or vblank
This patch requests for drmModePageFlip() for the used CRTC, if the kernel
module suppports async page flip. If it does not, the element requests for a
vblank event. A GstPoll waits for the event to happen.

https://bugzilla.gnome.org/show_bug.cgi?id=761059
2016-04-11 19:57:48 +02:00
Víctor Manuel Jáquez Leal
c419d17dbf kmssink: add dmabuf support
This patch will enable the import of dmabufs into a KMS buffer using
the PRIME kernel interface.

If the driver does not support prime import, the method is skipped.

It has been tested with a Freescale I.MX6 board.

https://bugzilla.gnome.org/show_bug.cgi?id=761059
2016-04-11 19:57:48 +02:00
Víctor Manuel Jáquez Leal
1aee6cdc25 kmssink: calculate display ratio
Get the aspect ratio given the information provided by libdrm, and with it
calculate the display ratio.

https://bugzilla.gnome.org/show_bug.cgi?id=761059
2016-04-11 19:57:48 +02:00
Víctor Manuel Jáquez Leal
620e1d2fcd kmssink: add plugin and sink element
This is simple video sink that use libdrm/libkms API to render frames.

The element uses planes to render through drmModeSetPlane().

It has been tested in an Exynos4412 board and in a Freescale I.MX6 board.

https://bugzilla.gnome.org/show_bug.cgi?id=761059
2016-04-11 19:57:48 +02:00