Commit graph

317 commits

Author SHA1 Message Date
Jan Schmidt
bfe2994101 tsdemux: Fix mpegts_packetizer_set_current_pcr_offset()
When adjusting the PCR offset of groups, adjust the correct group
entry from the list - not the current group repeatedly.
2014-03-25 21:40:11 +11:00
Edward Hervey
6629ca8f2b tsdemux: Support Bluray DTS/DTS-HD and AC3+/TrueHD streams
Apart from just adding detection of the proper stream type, we also need to only
output the first substream (0x71) which contains the core substream.

While this does not provide *full* DTS-HD support (since it will miss the complementary
substreams), it will still work in the way legacy (non-DTS-HD) bluray players would work.

https://bugzilla.gnome.org/show_bug.cgi?id=725563
2014-03-15 18:09:12 +01:00
Thiago Santos
6b4ce0d04f tsdemux: store global tags to push later
Keep a list of current global tags around and push them
whenever a new stream is started. Also convert all stream
specific tags to global as they are stream specific for
the container, so they are global for the streams from
within that container.

https://bugzilla.gnome.org/show_bug.cgi?id=644395
2014-02-26 10:26:57 -03:00
Edward Hervey
fc34d163d8 mpegtsbase: Uncomment PAT clearup in _reset
The PAT is related to the stream, we therefore want it cleared along
with anything stream related.

This commented section was from the (old) mpegtsparse and *might* have
been related to speeding up DVB start-up. But we have another plan for that.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=724716
2014-02-21 14:07:51 +01:00
Edward Hervey
c229a87ac3 mpegtspacketizer: Fix ts_to_offset beyond last observed PCR
The requested TS might be beyond the last observed PCR. In order to calculate
a coherent offset, we need to use the last and previous-to-last groups.

https://bugzilla.gnome.org/show_bug.cgi?id=721035
2014-02-20 21:52:16 +01:00
Edward Hervey
3e6c1967c9 mpegtspacketizer: Remove or move variable assignments
To where they're needed
2014-02-07 11:54:07 +01:00
Edward Hervey
00bf61a0db mpegtsdemux: Update plugin license field
The original code (old mpegtsparse) from which this plugin was based on
was dual-licensed. This allowed usage of the code under any of the
licenses (which including LGPL):

"""
* Alternatively, the contents of this file may be used under the terms of
* the GNU Lesser General Public License Version 2 or later (the "LGPL"),
* in which case the provisions of the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of the MPL or the LGPL.
"""

When refactored (leading to the creation of this new plugin), I chose all
new code to be LGPL-only (which was allowed for pre-existing code) by removing
the MPL sections.

The headers were all updated, but not the plugin license field. This commit
fixes this.
2014-02-06 14:28:54 +01:00
Sebastian Dröge
9682e44db6 tsdemux: We do not support the SKIP seek flag but that is not a problem 2014-01-30 20:29:58 +01:00
Amaury Medeiros
44a87d2109 tsdemux: Fix flags comparison operator precedence
Fix operator precedence, so the whole operation is
negated instead of only flags variable.

https://bugzilla.gnome.org/show_bug.cgi?id=722096
2014-01-28 13:56:44 +01:00
Andrey Utkin
0caa4cdfd8 tsdemux: Fix leak of PCROffsetGroup
https://bugzilla.gnome.org/show_bug.cgi?id=722462
2014-01-17 23:08:49 -03:00
Andrey Utkin
4d957e53e4 tsdemux: fix memleak of PCROffsetCurrent
https://bugzilla.gnome.org/show_bug.cgi?id=722145
2014-01-14 10:33:44 +01:00
Sebastian Dröge
84bd65b9bd tsdemux: Add HEVC / h265 support 2014-01-06 13:54:40 +01:00
Edward Hervey
64592da3e9 tsdemux: Demote GST_ERROR to GST_WARNING
discontinuities are not errors per-se and we handle them correctly.
2013-10-28 09:15:20 +01:00
Matthieu Bouron
84fbc08c25 mpegtsdemux: fix uninitialized variable warning
https://bugzilla.gnome.org/show_bug.cgi?id=710759
2013-10-25 12:26:23 +01:00
Edward Hervey
70d83b323b mpegtspacketizer: Skip packets with corrupted length
This is similar to what we do for packets with payload
2013-10-11 10:34:17 +02:00
Edward Hervey
5e50cd507c tsdemux: Refactor language tag extraction
subtitling descriptor needs to be used with a different method to extract
language codes.
2013-10-11 10:29:20 +02:00
Jesper Larsen
b6d33e5ce4 tsdemux: Use mpegts-lib for ISO 639 language tags
https://bugzilla.gnome.org/show_bug.cgi?id=709180
2013-10-07 10:23:22 +02:00
Jesper Larsen
279bdef4ea tsdemux: Return descriptor in get_descriptor
https://bugzilla.gnome.org/show_bug.cgi?id=709180
2013-10-07 10:23:22 +02:00
Steve Maynard
17ed696faa mpegts: Add SCTE/EISS sections and table types
https://bugzilla.gnome.org/show_bug.cgi?id=708688
2013-09-28 13:15:44 +02:00
Edward Hervey
0e9ce593bf tsdemux: Wait for valid PCR/offset obvervations
It is quite possible that we might get PTS/DTS before the first
PCR/Offset observation.

In order to end up with valid timestamp we wait until at least one
stream was able to get a proper running-time for any PTS/DTS.
Until then, we queue up the pending buffers to push out.

Once we see a first valid timestamp, we re-evaluate the amount of
running-time elapsed (based on returned inital running-time and amount
of data/DTS queued up) for any given stream.

Taking the biggest amount of elapsed time, we set that on the packetizer
as the initial offset and recalculate all pending buffers running-time
PTS/DTS.

Note: The buffer queueing system can also be used later on for the
dvb fast start proposal (where we queue up all stream packets before
seeing PAT/PMT and then push them once we know if they belong to the
chosen program).
2013-09-28 13:15:43 +02:00
Edward Hervey
2762ead5ef mpegtsdemux: New PCR<=>Offset estimation code
This allows:
* Better duration estimation
* More accurate PCR location
* Overall more accurate running-time location and calculation

Location and values of PCR are recorded in groups (PCROffsetGroup)
with notable PCR/Offset observations in them (when bitrate changed
for example). PCR and offset are stored as 32bit values to
reduce memory usage (they are differences against that group's
first_{pcr|offset}.

Those groups each contain a global PCR offset (pcr_offset) which
indicates how far in the stream that group is.

Whenever new PCR values are observed, we store them in a sliding
window estimator (PCROffsetGroupCurrent).

When a reset/wrapover/gap is detected, we close the current group with
current values and start a new one (the pcr_offset of that new group
is also calculated).

When a notable change in bitrate is observed (+/- 10%), we record
new values in the current group. This is a compromise between
storing all PCR/offset observations and none, while at the same time
providing better information for running-time<=>offset calculation
in VBR streams.

Whenever a new non-contiguous group is start (due to seeking for example)
we re-evaluate the pcr_offset of each groups. This allows detecting as
quickly as possible PCR wrapover/reset.

When wanting to find the offset of a certain running-time, one can
iterate the groups by looking at the pcr_offset (which in essence *is*
the running-time of that group in the overall stream).
Once a group (or neighbouring groups if the running-time is between two
groups) is found, once can use the recorded values to find the most
accurate offset.

Right now this code is only used in pull-mode , but could also
be activated later on for any seekable stream, like live timeshift
with queue2.

Future improvements:
* some heuristics to "compress" the stored values in groups so as to keep
  the memory usage down while still keeping a decent amount of notable
  points.
* After a seek compare expected and obtained PCR/Offset and if the
  difference is too big, re-calculate position with newly observed
  values and seek to that more accurate position.

Note that this code will *not* provide keyframe-accurate seeking, but
will allow a much more accurate PCR/running-time/offset location on
any random stream.
For past (observed) values it will be as accurate as can be.
For future values it will be better than the current situation.
Finally the more you seek, the more accurate your positioning will be.
2013-09-28 13:15:43 +02:00
Edward Hervey
5017ba84a7 mpegtspacketizer: No longer use a private struct
These are not public headers, it just adds complexity for no reason
2013-09-28 13:15:43 +02:00
Sebastian Dröge
d7c7f54734 mpegtsparse: Queue buffers until we have enough to know the caps
https://bugzilla.gnome.org/show_bug.cgi?id=708222
2013-09-27 16:10:54 +02:00
Arnaud Vrac
467e0151d3 mpegtspacketizer: rework TS packet sync and extraction
The previous code could enter an infinite loop because the adapter state
could get out of sync with its mapped data state after sync was lost.
The code was pretty confusing so it's been rewritten to be clearer.

The easiest way to reproduce the infinite loop is to use the breakmydata
element before tsdemux to trigger a resync.

https://bugzilla.gnome.org/show_bug.cgi?id=708161
2013-09-27 15:17:24 +02:00
Arnaud Vrac
85ad4f3ad6 tsdemux: fix buffer overflow
This can happen with a corrupt TS file, found with breakmydata element
plugged before tsdemux.

https://bugzilla.gnome.org/show_bug.cgi?id=708161
2013-09-27 15:10:23 +02:00
Sudip Jain
27739e8bb6 mpegtspacketizer: Correct condition check for current next indicator
https://bugzilla.gnome.org/show_bug.cgi?id=708106
2013-09-16 11:00:16 +02:00
Thiago Santos
efb27f19ec tsdemux: respect seqnums on seeks
Pass the seqnum to other events that are consequence of the
original seek event
2013-09-10 19:44:24 -03:00
Tim-Philipp Müller
cf791f6cb0 mpegtsdemux: fix possible read beyond end of buffer when resyncing 2013-08-27 17:05:44 +01:00
Edward Hervey
fd4fd13dc8 tsdemux: Refuse negative rates which we don't support yet
And remove a check which was done before
2013-08-21 14:44:38 +02:00
Edward Hervey
d6b55b8a66 mpegtsbase: Adapt for latest mpegts lib changes 2013-08-21 08:59:42 +02:00
Edward Hervey
21ebc7708d pesparse: Refactory secondary PES extension handling
Some streams had wrong values for the stream_id_extension, make sure
we only remember the valid ones.

For streams with PES_extension_field_length == 0, assume there's nothing
else.

For streams that state they have a TREF extension but don't have enough
data to store it, just assume it was produced by a non-compliant muxer
and skip the remaining data.

Only store remaining data in stream_id_extension_data instead of storing
data we already parse.
2013-08-14 13:41:37 +02:00
Edward Hervey
ddee83ef0b pesparse: Fix pes extension data length check
And remove length/data updates (we use the header size just below to
properly set them).

Based on feedback from Stas Sergeev <stsp@list.ru>

https://bugzilla.gnome.org/show_bug.cgi?id=657343
2013-08-14 10:39:46 +02:00
Edward Hervey
5208b8a050 pesparse: Remove unused argument
We always provided 0 as the offset and never used the returned value.

Based on feedback from Stas Sergeev <stsp@list.ru>

https://bugzilla.gnome.org/show_bug.cgi?id=657343
2013-08-14 10:33:14 +02:00
Edward Hervey
3b60f88437 mpegtspacketizer: Look harder for next sync position
If ever we lose sync, we were just checking for the next 0x47 marker ...
which might actually happen within a mpeg-ts packet.

Instead check for 3 repeating 0x47 at the expected packet size interval,
which the same logic we use when we initially look for the packet size.
2013-08-02 10:41:25 +02:00
Edward Hervey
c28acaa3c5 mpegtspacketizer: Fix PCR LUT table
We were only resetting the first 512 values of the lookup table instead
of the whole 8192.
This resulted in any PCR PID over 0x0200 ... ending up taking the first PCR
table around :(
2013-08-02 10:41:25 +02:00
Tim-Philipp Müller
646ba6b3df mpegts: private/teletext -> application/x-teletext 2013-07-30 16:08:17 +01:00
Sebastian Dröge
6812f96de4 gst: Don't swap start/stop for negative rates in the SEGMENT query 2013-07-29 12:14:08 +02:00
Sebastian Dröge
12981a5d82 tsdemux: Implement SEGMENT query 2013-07-29 11:02:55 +02:00
Edward Hervey
a45aa8fe48 tsdemux: Remove unused macros 2013-07-29 09:42:12 +02:00
Edward Hervey
edd69b2989 tsdemux: Add more AC3 detection cases
ATSC ac3 streams are always guaranteed to be AC3 if EAC3 descriptor
is not present
If stream registration id is 'AC-3' then it's also guaranteed to be AC3.
Finally if AC3 descriptor is present it's guaranteed to be AC3.

Only silences a warning, but still.
2013-07-29 09:42:11 +02:00
Edward Hervey
a76c658e8d tsdemux: Flush out pending data on EOS
Ensures downstream elements (like decoders) really get all the data
2013-07-29 09:42:11 +02:00
Edward Hervey
ca77865bce mpegtspacketizer: More AFC flags
I should have put those in a previous commit. sorry :(
2013-07-29 09:42:11 +02:00
Edward Hervey
cea403eaa5 mpegdefs: Simplify PCR/PTS/DTS => GST conversion macros
We know we will not overflow 64 bits, therefore just use direct
multiplication/division instead of the scale method (trims usage from
50 instruction calls to 2/3).
2013-07-29 09:42:11 +02:00
Edward Hervey
e6ebd9024e tsdemux: HDV only has mpeg 1 audio layer 2
Set that accordingly on the caps
2013-07-27 12:18:36 +02:00
Edward Hervey
8c60e42070 mpegtsdemux: Add more flag debugging for PES and TS packets
Helps with debugging issues. And also remove unused variable (opcr)

This will also allow us in the future to properly detect:
* random-access location (to enable keyframe observation and
  potentially seeking
* discont location (to properly handle resets)
* splice location (to properly handle new stream changes)
2013-07-26 08:17:17 +02:00
Edward Hervey
dbe350d380 pesparse: Demote a Warning
We actually now know what to do ... have a log message :)
2013-07-26 06:46:41 +02:00
Edward Hervey
1f7fa9be1d tsdemux: Remember requested seek rate and use it
The new seek handling re-creates the segment time information once it
has enough information after a seek.

The problem was that we'd completely ignore the requested rate. So store
that and use it in the newly created segment.

https://bugzilla.gnome.org/show_bug.cgi?id=694369
2013-07-24 15:51:46 +02:00
Edward Hervey
069a497d19 tsdemux: Create and send codec tag
Helps with applications that rely on presence of that tag for user-facing
information.

https://bugzilla.gnome.org/show_bug.cgi?id=702216
2013-07-23 15:11:51 +02:00
Sebastian Dröge
44e404fe41 tsdemux: Add support for group-id in the stream-start event 2013-07-23 10:33:31 +02:00
Sebastian Dröge
2a1877909f tsparse: Add support for group-id in the stream-start event 2013-07-23 10:33:31 +02:00