Tis patch, allows some properties that we want to be set on
runtime. (eg. bitrate)
Note that all properties are under control by num_codedbuf_queued.
https://bugzilla.gnome.org/show_bug.cgi?id=786321
Handles new custom event GstVaapiEncoderRegionOfInterest
to enable/disable a ROI region.
Writes a way to use new event to document.
https://bugzilla.gnome.org/show_bug.cgi?id=768248
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
This new virtual method, get_profile(), if implemented by specific
encoders, will return the VA profile potentially determined by the
source caps.
Also it is implemented by h264 and h265 encoders, which are the main
users of this vmethod.
https://bugzilla.gnome.org/show_bug.cgi?id=771291
In order to get the supported surface formats within a specific
profile this patch adds the GstVaapiProfile as property to
gst_vaapi_encoder_get_surface_formats().
Currently the extracted formats are only those related with the
default profile of the element's codec.
https://bugzilla.gnome.org/show_bug.cgi?id=771291
As in gstreamer-vaapi a common base class is used, the specific
default category is passed to the base-plugin initializator, thus
the log messages are categorized with the used plugin.
Nonetheless, when the gst-debug is disabled in compilation time,
it is needed to pass NULL to the base-plugin initializator. This
patch does that.
https://bugzilla.gnome.org/show_bug.cgi?id=780302
As the internal encoder is created at start(), let's release it at
stop() vmethod, to be consistent.
gst_vaapiencode_destroy() is called since it also resets the input and
output states, which is something that the base class does internally
after calling stop() vmethod.
https://bugzilla.gnome.org/show_bug.cgi?id=769266
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
Currently, specific encoder is created during set_format(). This might
lead to race condition when creating profiles with multiple encoders.
This patch moves ensure_encoder() call to start() vmethod to ensure
avoiding the race condition.
https://bugzilla.gnome.org/show_bug.cgi?id=773546
In order to handle correctly seek and other operations, vaapiencode should
flush all the remaining data from the encoder without pushing it downstream.
This patch implements the flush() vmethod, only after of pausing the
source pad task, and restarting it again after the flush stop.
https://bugzilla.gnome.org/show_bug.cgi?id=767176
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
In bug 757598 was added the set_context() vmethod chain up in
GstVaapiPluginBase. But it is buggy, since the parent_class address is
assigned to the last element which called gst_vaapi_plugin_base_class_init().
No error has shown up since none of the element's base classes redefined
set_context() vmethod from GstElement, so always the correct function was
called. Still this code is wrong and this patch make it right.
Since set_context() is the same code, a macro is used to implement that code
in all the gst-vaapi elements.
https://bugzilla.gnome.org/show_bug.cgi?id=765368
As gstreamer-vaapi now only supports from GStreamer 1.6, this patch removes
all the old GStreamer version guards.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
GstVideoEncoder, the base class of vaapiencode, added support for pad queries
as virtual methods since gstreamer 1.4. This patch enables those vmethods,
while keeps support for previous versions of gstreamer.
This patch is relevant since GstVideoEncoder takes care of other queries that
we are currently ignoring.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757629
The current context query handling design is flawed: the function
gst_vaapi_reply_to_query() returns FALSE either if the query is not a
GST_CONTEXT_QUERY of if the query could not be handled correctly. But the
pad query function should handle differently each case.
This patch changes the gst_vaapi_reply_to_query() for
gst_vaapi_handle_context_query() and changes it usage in all the vaapi plugins
to match the correct context query handling.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757598
Working on bug #744042 I realized that the gstvaapiuploader is practically not
used.
This patch removes the gstvaapiuploader and add the method
gst_vaapi_plugin_base_get_allowed_raw_caps () that returns the raw caps that
the system can handle, which is used by vaapisink and vaapipostproc.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=752777
The purpose of gstcompat.h is to couple the API differences among
gstreamer-1.0 and gstreamer-0.10. Since gstreamer-0.10 is obsolete, the code
in this compatibility layer shall be removed.
Nevertheless, the gstcompat.h header should be kept, if new incompatibilites
appear in the future, but it shall live in gst/vaapi, not in gst-libs.
This patch removes the crumbs defined gstcompat.h and moves it to gst/vaapi.
In order to avoid layer violations, gstcompat.h includes sysdeps.h and all
the includes in gst/vaapi of sysdeps.h are replaced with gstcompat.h
https://bugzilla.gnome.org/show_bug.cgi?id=745728
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
Attach the codec_data to out_caps only if downstream needed.
For eg: h264 encoder doesn't need to stuff codec_data to the
src caps if the negotiated caps has a stream format of byte-stream.
https://bugzilla.gnome.org/show_bug.cgi?id=734902
vaapiencode might hang when the pipeline is stopped without any EOS,
e.g. when <Ctrl>+C is pressed, thus causing the srcpad task to keep
running and locked. This fixes a possible deadlock on state change
from PAUSED to READY.
https://bugzilla.gnome.org/show_bug.cgi?id=720584
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Add interface to communicate the encoder resolution and related info
like framerate, interlaced vs. progressive, etc. This new interface
supersedes gst_vaapi_encoder_set_format() and doesn't use any GstCaps
but rather use GstVideoCodecState.
Note that gst_vaapi_encoder_set_codec_state() is also a synchronization
point for codec config. This means that the encoder is reconfigured
there to match the latest properties.
Don't try to destroy an encoder, in GstVideoEncoder::finish() handler,
if it was not created in the first place. Return "not-negotiated" error
since this means we did not even reach GstVideoEncoder::set_format(),
where the encoder could have been created.
This fixes a crash when the vaapiencode_* plug-in elements get deallocated
and that we failed to negotiate either pad.
https://bugzilla.gnome.org/show_bug.cgi?id=719704
The specified caps in gst_video_encoder_set_output_state() function
arguments should not contain any resolution, pixel-aspect-ratio,
framerate, codec-data et al. Those rather should be set through the
returned GstVideoCodecState. This means that output caps creation
could be delayed until before gst_video_encoder_finish_frame() is
called.
This greatly simplifies the GstVideoEncoder::set_format() callback
by the way.
Make base GstVaapiEncode class an abstract type so that we cannot
create an instance from it without going through any of the codec
specific derived class.
Rename a few member functions to make them more consistent:
- alloc_encoder(): now reduced to allocate the encoder object only;
- alloc_buffer(): allocate buffer from srcpad, and copy bitstream.
Update MPEG-2 and H.264 encode elements to cope with the new core
libgstvaapi properties API. i.e. all configurable properties are now
directly handled at the GstVaapiEncoder level.
Besides, this also makes sure to not use or modify the GstVaapiEncoder
private definitions directly. Private data need to remain private.
https://bugzilla.gnome.org/show_bug.cgi?id=719529
Add gst_vaapi_encoder_set_bitrate() interface to allow the user control
the bitrate for encoding. Currently, changing this parameter is only
valid before the first frame is encoded. Should the value be modified
afterwards, then GST_VAAPI_ENCODER_STATUS_ERROR_OPERATION_FAILED is
returned.
https://bugzilla.gnome.org/show_bug.cgi?id=719529
Add gst_vaapi_encoder_set_rate_control() interface to request a new
rate control mode for encoding. Changing the rate control mode is
only valid prior to encoding the very first frame. Afterwards, an
error ("operation-failed") is issued.
https://bugzilla.gnome.org/show_bug.cgi?id=719529
Fix formts for various GST_DEBUG et al. invocations. More precisely,
make size_t arguments use the %zu format specifier accordingly; force
XID formats to be a 32-bit unsigned integer; and fix the format used
for gst_vaapi_create_surface_with_format() error cases since we have
been using strings nowadays.
Factor out propose_allocation() hooks, creation of video buffer pool
for the sink pad, conversion from raw YUV buffers to VA surface backed
buffers. Update vaapidecode, vaapiencode and vaapipostproc to cope
with the new GstVaapiPluginBase abilities.
Move common VA display creation code to GstVaapiPluginBase, with the
default display type remaining "any". Also add a "display-changed"
hook so that subclasses could perform additional tasks when/if the
VA display changed, due to a new display type request for instance.
All plug-ins are updated to cope with the new internal APIs.
Introduce a new GstVaapiPluginBase object that will contain all common
data structures and perform all common tasks. First step is to have a
single place to hold VA displays.
While we are at it, also make sure to store and subsequently release
the appropriate debug category for the subclasses.
Clean public APIs up so that to better align with the decoder APIs.
Most importantly, gst_vaapi_encoder_get_buffer() is changed to only
return the VA coded buffer proxy. Also provide useful documentation
for the public APIs.
Refactor the GstVaapiCodedBuffer APIs so that to more clearly separate
public and private interfaces. Besides, the map/unmap APIs should not
be exposed as is but appropriate accessors should be provided instead.
* GstVaapiCodedBuffer: VA coded buffer abstraction
- gst_vaapi_coded_buffer_get_size(): get coded buffer size.
- gst_vaapi_coded_buffer_copy_into(): copy coded buffer into GstBuffer
* GstVaapiCodedBufferPool: pool of VA coded buffer objects
- gst_vaapi_coded_buffer_pool_new(): create a pool of coded buffers of
the specified max size, and bound to the supplied encoder
* GstVaapiCodedBufferProxy: pool-allocated VA coded buffer object proxy
- gst_vaapi_coded_buffer_proxy_new_from_pool(): create coded buf from pool
- gst_vaapi_coded_buffer_proxy_get_buffer(): get underlying coded buffer
- gst_vaapi_coded_buffer_proxy_get_buffer_size(): get coded buffer size
Rationale: more optimized transfer functions might be provided in the
future, thus rendering the map/unmap mechanism obsolete or sub-optimal.
https://bugzilla.gnome.org/show_bug.cgi?id=719775
