dvbsuboverlay signals no subtitles present by not setting
GstVideoOverlayCompositionMeta on a buffer.
Detect this, and remove subtitles whenever we have no overlay composition to
hand.
Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Otherwise restarting may fail because the state of vaapipluginbase and
vaapipostproc don't match. e.g. gst_vaapipostproc_set_caps() will skip
initailization and not call gst_vaapi_plugin_base_set_caps()
Make sure that the GstVaapiPluginBase instance receives the new src
pad caps whenever they get updated from within the GstVaapiDecoder
decode routines.
This also ensures that downstream elements receive correctly sized
SW decoded buffers if needed.
https://bugs.tizen.org/jira/browse/TC-114
Split GstVideoDecoder::set_format() handler to first update the sink
pad caps and reset the active VA decoder instance based on those, and
then update the src pad caps whenever possible, e.g. when the caps
specify a valid video resolution.
In some occasions, a buffer pool is created for pre-initialization
purposes regardless of whether a valid image size is available or
not. However, during actual decode stage, the vaapidecode element
is expected to update the srcpad caps with the new dimensions, thus
also triggering a reset of the underlying bufferpool.
If the best downstream capsfeature turns out to be GLMemory, then make
sure to propagate RGBA video format in caps to that element. This fixes
the following pipeline: ... ! vaapipostproc ! glimagesink.
When an explicit output video format is selected, from an src pad
capsfilter, make sure that the downstream element actually supports
that format. In particular, fix crash with the following pipelines:
... ! vaapipostproc ! video/x-raw,format=XXX ! xvimagesink ; where
XXX is a format not supported by xvimagesink.
While doing so, also reduce the set of src pad filter caps to the
actual set of allowed src pad caps.
The ensure_surface() and ensure_image() functions shall only relate
to the underlying backing store. The actual current flags are to be
updated only through ensure_{surface,image}_is_current() or very other
particular cases in GstMemory hooks.
If the surface proxy is updated into the GstVaapiVideoMemory, then
it is assumed it is the most current representation of the current
video frame. Likewise, make a few more arrangements to have the
"current " flags set more consistently.
When interacting with SW elements, the buffers and underlying video
memory could be mapped as read/write. However, we need to use those
buffers again as plain VA surfaces, we have to make sure the VA image
is thus committed back to VA surface memory.
This fixes pipelines involving avdec_* and vaapi{postproc,sink}.
Hence vaapisink can display buffers decoded by gst-libav, or HW decoded
buffers can be further processed in-place, e.g. with a textoverlay.
https://bugzilla.gnome.org/show_bug.cgi?id=704078
[ported to current git master branch, amended commit message]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
In the current implementation, gst_video_info_set_format() would reset
the whole GstVideoInfo structure first, prior to setting video format
and size. So, coleteral information like framerate or pixel-aspect-
ratio are lost.
Provide and use a unique gst_video_info_change_format() for overcome
this issue, i.e. only have it change the format and video size, and
copy over the rest of the fields.
https://bugzilla.gnome.org/show_bug.cgi?id=734665
This is for helping decodebin to autoplug the vaapidecode element.
Decodebin is selecting decoder elements only based on rank and caps.
Without overriding the autoplug-* signals there is no way to autoplug
HW decoders inside decodebin. An easier soulution is to raise the
rank of vaapidecode, so that it gets selected first.
https://bugzilla.gnome.org/show_bug.cgi?id=739332
Added the same Klass specifications used in other upstream
video postprocessing elements like videoconvert, videoscale,
videobalance and deinterlace.
An example use case is for this is to help the playsink
to autoplug the hardware accelerated deinterlacer.
This is a workaround until auto-plugging is fixed when
format=ENCODED + memory:VASurface caps feature are provided.
Use the downstream negotiated video format as the output video format
if the user didn't ask for the colorspace conversion explicitly.
Usecase: This will help to connect elements like videoscale, videorate etc
to vaapipostproc.
https://bugzilla.gnome.org/show_bug.cgi?id=739443
Add new "scale-method" property to expose the scaling mode to use during
video processing. Note that this is only a hint, and the actual behaviour
may differ from implementation (VA driver) to implementation.
Attach the codec_data to out_caps only if downstream needed.
For eg: h264 encoder doesn't need to stuff codec_data to the
src caps if the negotiated caps has a stream format of byte-stream.
https://bugzilla.gnome.org/show_bug.cgi?id=734902
Fix arguments to XkbKeycodeToKeysym() for converting an X11 keycode
to a KeySym. In particular, there is no such Window argument. Also
make sure to check for, and use, the correct <X11/XKBlib.h> header
where that new function is defined. Otherwise, default to the older
XKeycodeToKeysym() function.
Really use the motion event coordinates to propagate the "mouse-move"
event to upper layer, instead of those from a button event. Those are
technically the same though.
When we copy a buffer because we're moving it into VA-API memory, we
need to copy flags. Otherwise, interlaced YUV buffers from a capture
source (e.g. V4L2) don't get flagged as interlaced.
https://bugzilla.gnome.org/show_bug.cgi?id=726270
Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
[reversed order of gst_buffer_copy_into() flags to match <1.0 code]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Allow implicit conversions to raw video formats, while still keeping
VA surfaces underneath. This allows for chaining the vaapipostproc
element to a software-only element that takes care of maps/unmaps.
e.g. xvimagesink.
https://bugzilla.gnome.org/show_bug.cgi?id=720174
Use pooled GstVaapiVideoMeta information, i.e. always allocate that on
video buffer allocation. Also optimize copy of additional metadata info
into the resulting video buffer: only copy the video cropping info and
the source surface proxy.
https://bugzilla.gnome.org/show_bug.cgi?id=720311
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
[fixed proxy leak, fixed double free on error, optimized meta copy]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
If no explicit output surface format is supplied try to keep the one
supplied through the sink pad caps. This avoids a useless copy, even
if things are kept in GPU memory.
This is a performance regression from git commit dfa70b9.
If only advanced deinterlacing is requested, i.e. deinterlacing is
the only active algorithm to apply with source and output surface
formats being the same, then make sure to enable VPP processing.
Otherwise, allow fallback to bob-deinterlacing with simple rendering
flags alteration.
Add a default decide_allocation() hook to GstVaapiPluginBase. The caps
feature argument can be used to force a bufferpool with a specific kind
of memory.
Add GST_VAAPI_VIDEO_BUFFER_POOL_ACQUIRE_FLAG_NO_ALLOC params flag that
can be used to disable early allocations of vaapi video metas on buffers,
thus delagating that to the bufferpool user.
Default to I420 format for output surfaces so that to match the usual
GStreamer pipelines. Though, internally, we could still opt for NV12
surface formats, i.e. default format=ENCODED is a hint for that, thus
delegating the decision to the VA driver.
Use the new gst_caps_has_vaapi_surface() helper function to detect
whether the sink pad caps contain native VA surfaces, or not, i.e.
no raw video caps.
Also rename is_raw_yuv to get_va_surfaces to make the variable more
explicit as we just want a way to differentiate raw video caps from
VA surfaces actually.
The "discontinuity" tracking code, whereby lost frames are tentatively
detected, is inoperant if the sink pad buffer timestamps are not right
to begin with.
This is a temporary workaround until the following bug is fixed:
https://bugzilla.gnome.org/show_bug.cgi?id=734386
In order to make the discontinuity detection code useful, we need to
detect the lost frames in the history as early as the previous frame.
This is because some VA implementations only support one reference
frame for advanced deinterlacing.
In practice, turn the condition for detecting new frame that is beyond
the previous frame from field_duration*2 to field_duration*3, i.e.
nothing received for the past frame and a half because of possible
rounding errors when calculating the field-duration either in this
element (vaapipostproc), or from the upstream element (parser element).
This is a regression introduced with commit faefd62.
https://bugzilla.gnome.org/show_bug.cgi?id=734135
Introduce new gst_caps_has_vaapi_surface() helper function to detect
whether the supplied caps has VA surfaces. With GStreamer >= 1.2, this
implies a check for memory:VASurface caps features, and format=ENCODED
for earlier versions of GStreamer.
