If the frame is a cloned picture, its PTS comes from its parent
picture. In addition, the base decoder doesn't set a valid PTS to
the frame corresponding to the cloned picture.
https://bugzilla.gnome.org/show_bug.cgi?id=774254
This method will return the valid surface formats in the current
config. If the are no VAConfig it is created with the information
available.
https://bugzilla.gnome.org/show_bug.cgi?id=769266
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
Split set_context_info() adding init_context_info() which only
initialises the GstVaapiContextInfo structure inside GstVaapiEncoder
required for VAConfig.
https://bugzilla.gnome.org/show_bug.cgi?id=769266
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
If GstVaapiContextInfo has just initial information, without frame's
width and height, skip the creation of the VAContext, just keep the
VAConfig.
https://bugzilla.gnome.org/show_bug.cgi?id=769266
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
Split the funcion context_create() into context_create() and
config_create().
Decoupling VAConfig and VAContext during context creation, we could
query the VAConfig for the supported surface's formats without creating
a VAContext.
https://bugzilla.gnome.org/show_bug.cgi?id=769266
Originally the drm backend only tried to open the first render node
found. But in hybrid system this first render node might not support
VA-API (propietary Nvidia driver, for example).
This patch tries all the available nodes until a finding one with a
VA-API supported driver.
https://bugzilla.gnome.org/show_bug.cgi?id=774811
Original-patch-by: Stirling Westrup <swestrup@gmail.com> and
Reza Razavi <reza@userful.com>
In case libva-wayland has its headers not installed in default
locations (like /usr/include), the build fails to include "wayland-client.h":
CC libgstvaapi_egl_la-gstvaapiutils_egl.lo
In file included from gstvaapidisplay_wayland.h:27:0,
from gstvaapidisplay_egl.c:35:
/usr/include/va/va_wayland.h:31:28: fatal error: wayland-client.h: No such file or directory
#include <wayland-client.h>
As we already passed VA_CLAGS, /usr/include/va/va_wayland.h could be found, but it is
our fault not to instruct the system that we ALSO care for va_wayland. We correctly query
for libva-wayland.pc in configure and use this in other places as well. It is thus only
correct and consequent, to do it also at this spot.
https://bugzilla.gnome.org/show_bug.cgi?id=773946
This patch ensures to get the formats, as filter does, available in the
decoder / encoder context.
The context fills up the array as soon it is created, otherwise the pipeline
could get stalled (perhaps this is a bug in my HSW backend).
https://bugzilla.gnome.org/show_bug.cgi?id=752958
The query of all the supported formats for a VA config were only used by the
postprocessor (vaapifilter). But, in order to enable the vaapidecoder to
negotiate a suitable raw format with downstream, we need to query these
formats against the decoder's config.
This patch is the first step: moves the code in filter's ensure_image() to a
generic gst_vaapi_get_surface_formats() in vaapiutils_core, so it can be
shared later by the decoder.
https://bugzilla.gnome.org/show_bug.cgi?id=752958
When creating a GstVaapiWindowEGL, it also creates native window by its own
native display. It should pass the native display, either X11 or Wayland.
https://bugzilla.gnome.org/show_bug.cgi?id=768266
This patch is to change the inheritance of GstVaapiDisplay to GstObject,
instead of GstVaapiMiniObject. In this way we can use all the available
infrastructure for GObject/GstObject such as GstTracer, GIR, etc.
In addition, a new debug category for GstVaapiDisplay is created to make it
easier to trace debug messages. It is named "vaapidisplay" and it transverse
all the VA display backends (DRM, GLX, EGL, Wayland, ...)
This patch is a step forward to expose GstVaapiDisplay for users in a future
library.
https://bugzilla.gnome.org/show_bug.cgi?id=768266
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
GstVaapiDecode is a descendant of GstVaapiMiniObject, so, thought we should
use its methods, even though it doesn't change functionality.
GstVaapiPixmap, GstVaapiTexture and GstVaapiWindow are descendant of
GstVaapiObject, hence its methods shall be used.
https://bugzilla.gnome.org/show_bug.cgi?id=772554
instances when created and reuse
This patch improves performance when glimagesink uploads a GL texture.
It caches the GStVaapiTexture instances in GstVaapiDisplay{GLX,EGL}, using an
instance of GstVaapiTextureMap, so our internal texture structure can be found
by matching the GL texture id for each frame upload process, avoiding the
internal texture structure creation and its following destruction.
https://bugzilla.gnome.org/show_bug.cgi?id=769293
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
Implement GstVaapiTextureMap object, which caches VAAPI textures, so them can be
reused. Internally it is a hash table.
Note that it is GstObject based rather than GstVaapiObject, as part of the future
converstion to GstObject of most of the code.
https://bugzilla.gnome.org/show_bug.cgi?id=769293
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
We are not getting enough compression for some streams and
encoded frame end up with more size than allocated.
Assuming a compression ratio of 4, which should be good enough
for holding the frames.
https://bugzilla.gnome.org/show_bug.cgi?id=771528
While doing the mode-1 referece picture selection,
the circular buffer logic was not correctly setting the
refresh frame flags as per VP9 spec.
Make sure refresh_flag[0] get updated correclty after
each cycle of GST_VP9_REF_FRAMES.
https://bugzilla.gnome.org/show_bug.cgi?id=771507
When the format of a H.264 stream is AVC3, the SPS and PPS are inside the
stream, not in the codec_data, so the size of codec_data might be 7.
This patch reduces the minimal size of the codec_data buffer from 8 to 7.
https://bugzilla.gnome.org/show_bug.cgi?id=771441
In commit 2eb4394 the frame coding mode was verified for progressive
regardless the profile. But the FCM is only valid in the advanced
profile. This patch checks for the advanced profile before verifying FCM for
progressive.
https://bugzilla.gnome.org/show_bug.cgi?id=769250
In the earlier patch:
f31d9f3 decoder: vc1: Print error on interlaced content
Decoding would error out if the interlace flag was set in the
sequence bdu. This isn't quite right because a video can have this
flag set and yet not have any interlaced pictures.
Here instead we error out when either parsing a field bdu or
decoding a frame bdu which has fcm set to anything other than
progressive.
Signed-off-by: Scott D Phillips <scott.d.phillips@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=769250
Validate that fps numerator is non-zero so it can be used to calculate
the duration of the B frame.
Also it gst_util_uint64_scale() is used instead of normal arithmetic in
order to aviod overflows, underflows and loss of precision.
https://bugzilla.gnome.org/show_bug.cgi?id=768458
Since the upstream of gstreamer-vaapi, the library is not a public shared
object anymore. But the EGL support depended on this dynamic library, so the
EGL support was broken.
This patch removes the dynamic library loading code and instantiates the
EGL display using either X11 or Wayland if available.
https://bugzilla.gnome.org/show_bug.cgi?id=767203
This reverts commit 1dbcc8a0e1 and commit
372a03a9e3.
While the dmabuf handle is exported, the derive image must exist, otherwise
the image's VA buffer is invalid, thus the dmabuf handle is never released,
leading into a file descriptors leak.
A planar(or some other) buffer allocation may fail on the driver, then
the wayland connection becomes invalid, not able to send request or
receive any event. So we need to set up a new wayland connection if
there's an error detected on the cached wl_display.
https://bugzilla.gnome.org/show_bug.cgi?id=768761
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
Change defaults for max-bframes, cabac, and dct8x8 to be enabled
by default. This will cause the default profile to be high instead
of baseline. In most situations this is the right decision, and
the profile can still be lowered in the case of caps restrictions.
Signed-off-by: Scott D Phillips <scott.d.phillips@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757941
Without this, all dpb pictures are not released during flush,
because we used the global dpb_count variable for checking the
dpb fullness which get decremented in dpb_remove_index()
routine during each loop iteration.
https://bugzilla.gnome.org/show_bug.cgi?id=767934
Clarify that vaapi context resets are never needed for vp9, but
that ensure_context() needs called when the size increases so that
new surfaces can be allocated.
Signed-off-by: Scott D Phillips <scott.d.phillips@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=767474
Added two modes(as properties) for reference picture selection:
ref-mode-0: AltRef and GoldRef pointing to the recent keyframe
and LastRef is pointing to the previous frame.
ref-mode-1: Previous frame (n) as LastRef , n-1 th frame as GoldRef
and n-2 th frame as AltRef
https://bugzilla.gnome.org/show_bug.cgi?id=766048
