Original commit message from CVS:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-bad-plugins-docs.sgml:
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
* gst/xingheader/gstxingmux.c:
* gst/xingheader/gstxingmux.h:
Add documentation for the xingheader plugin.
* tests/check/elements/xingmux.c: (GST_START_TEST):
Set element state to PLAYING before doing something else.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/xingmux.c: (setup_xingmux),
(cleanup_xingmux), (GST_START_TEST), (xingmux_suite), (main):
* tests/check/elements/xingmux_testdata.h:
Add simple unit test for the xingmux element.
* gst/xingheader/gstxingmux.c: (generate_xing_header),
(gst_xing_mux_finalize), (xing_reset):
Fix a memleak and invalid seek tables with less than 100 MP3 frames.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_handle_first_frame), (mp3parse_time_to_bytepos),
(mp3parse_bytepos_to_time):
Interpolate the VBRI seek table entries to get better results,
support 3 byte seek table entries and prevent overflows in the
seek table by adding the relative offsets when using the seek
table in a large enough data type.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_reset),
(gst_mp3parse_handle_first_frame), (mp3parse_time_to_bytepos),
(mp3parse_bytepos_to_time):
* gst/mpegaudioparse/gstmpegaudioparse.h:
Add support for seeking based on the VBRI seek table. Might make
sense to use interpolation in the table later to get hopefully a
bit more accurate values.
Original commit message from CVS:
* gst/xingheader/gstxingmux.c: (generate_xing_header):
Bitrate is 4 bits, not 8 so check for 0xe as maximum value instead
of 0xfe.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_reset),
(gst_mp3parse_emit_frame), (gst_mp3parse_handle_first_frame),
(mp3parse_total_bytes), (mp3parse_total_time):
* gst/mpegaudioparse/gstmpegaudioparse.h:
Add initial support for reading VBRI headers as found in VBR files
created by some Fraunhofer encoders. Currently we only read the
number of frames and bytes (and calculate duration, etc from this)
but there is also a seek table that we currently don't use.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_handle_first_frame):
Guard against 0 values in the Xing header as frame count and
byte count and calculate the bitrate when we have all values
we need and not before.
Original commit message from CVS:
* gst/xingheader/gstxingmux.c: (has_xing_header),
(generate_xing_header), (gst_xing_mux_chain),
(gst_xing_mux_sink_event):
Choose smallest possible frame size for the Xing header, properly
set the timestamp, duration and offset on the outgoing buffers,
only send NEWSEGMENT events in BYTE format downstream and also
drop VBRI headers if already existing.
Original commit message from CVS:
* gst/xingheader/Makefile.am:
* gst/xingheader/gstxingmux.c: (parse_header), (get_xing_offset),
(has_xing_header), (generate_xing_header),
(gst_xing_mux_base_init), (gst_xing_mux_finalize), (xing_reset),
(gst_xing_mux_init), (gst_xing_mux_chain),
(gst_xing_mux_sink_event), (gst_xing_mux_change_state):
* gst/xingheader/gstxingmux.h:
Major cleanup and rewrite of xingmux with less bugs and new features:
- Handles other layers as 3
- Write TOC
Original commit message from CVS:
* ext/mad/gstmad.c: (mpg123_parse_xing_header):
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_handle_first_frame):
Make sure that the Xing TOC starts with 0 and the entries
are increasing over time. Otherwise it's broken and should
be skipped. Fixes bug #507821.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_sink_event), (mp3parse_handle_seek):
Don't post SEGMENT_START messages on the bus, only the element
driving the pipeline should do that.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
Restore the segment handling logic.
Please don't do behavioural changes under the heading of 'leak fixes'
or 'whitespace changes', people.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_emit_frame):
Remove some more broken code, it seems to clip even when it should not.
See #491305.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_emit_frame):
When the element is not driving the streaming thread it is not supposed
to emit EOS or post SEGMENT done. It is allowed to return UNEXPECTED
upstream when it detects EOS. See #491305.
Original commit message from CVS:
Patch by: Gautier Portet <kassoulet at gmail dot com>
* gst/xingheader/gstxingmux.c:
The size of the Xing header is actually 417 as it's rounded to the
next smaller integer. Fixes#397759.
* gst/xingheader/gstxingmux.c: (xing_generate_header),
(xing_push_header):
Some random cleanup, add FIXMEs and TODOs and check if the newsegment
event to the beginning was successful before pushing the header again.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c: (mp3parse_time_to_bytepos),
(mp3parse_bytepos_to_time):
Use gst_util_guint64_to_gdouble for conversions.
* win32/vs6/libgstmad.dsp:
Add a link to libgstaudio.
Original commit message from CVS:
* gst/dvdlpcmdec/gstdvdlpcmdec.c:
Add other allowed rates to the pad templates.
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_dispose):
Reset the parser to release memory in dispose.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_sink_event), (gst_mp3parse_emit_frame):
* gst/mpegaudioparse/gstmpegaudioparse.h:
Queue segment event and push it after we know the caps on the pad or
else an autoplugger might not have plugged the element yet and the
segment is lost.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_reset),
(gst_mp3parse_emit_frame), (mp3parse_handle_seek):
* gst/mpegaudioparse/gstmpegaudioparse.h:
Save some memory for each frame by only saving the start timestamp
and start byte position instead of additionally the stop timestamp
and stop byte position. This requires us to use a doubly-linked list
but still saves 8-12 bytes per frame.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_emit_frame):
Fix a calculation that was causing mp3parse to drop every incoming
frame when upstream delivered a segment in TIME format, breaking
playback of all mpeg system streams.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_base_init),
(gst_mp3parse_init):
Use GST_BOILERPLATE instead of manual GType magic.
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_handle_first_frame), (mp3parse_time_to_bytepos),
(mp3parse_bytepos_to_time):
* gst/mpegaudioparse/gstmpegaudioparse.h:
Implement seeking, byte->time, time->byte conversions with the Xing
seek table if available. This allows better at least a bit more
accurate seeks and file position reporting.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_handle_first_frame):
Copy the complete Xing seek table in the 100 byte array instead of
copying the first byte 100 times.
* gst/mpegaudioparse/gstmpegaudioparse.c: (mp3parse_total_bytes),
(mp3parse_total_time), (mp3parse_time_to_bytepos):
Add seeking support based on the Xing header but comment it out for
now as it seems to yield worse result than the other method.
Also use gst_pad_query_peer_duration() instead of getting the peer pad
ourself, creating a new GstQuery, etc.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c: (mp3_caps_create):
Fix "pad caps are not a real subset of its template caps" warning.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_reset),
(gst_mp3parse_emit_frame), (gst_mp3parse_handle_first_frame):
* gst/mpegaudioparse/gstmpegaudioparse.h:
If the Xing header provides a total time, use it to calculate the
correct average bitrate immediately, instead of sending updates as
we parse the stream.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(mp3_type_frame_length_from_header), (gst_mp3parse_reset),
(gst_mp3parse_emit_frame), (gst_mp3parse_handle_first_frame),
(gst_mp3parse_chain), (mp3parse_total_bytes),
(mp3parse_total_time):
* gst/mpegaudioparse/gstmpegaudioparse.h:
Implement parsing of Xing headers from the first frame of the stream,
and use it to report duration correctly where possible.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(mp3_type_frame_length_from_header), (gst_mp3parse_reset),
(gst_mp3parse_init), (gst_mp3parse_sink_event),
(gst_mp3parse_emit_frame), (gst_mp3parse_chain),
(gst_mp3parse_change_state), (mp3parse_time_to_bytepos),
(mp3parse_bytepos_to_time), (mp3parse_total_bytes),
(mp3parse_total_time), (mp3parse_handle_seek),
(mp3parse_src_event), (mp3parse_src_query),
(mp3parse_get_query_types), (plugin_init):
* gst/mpegaudioparse/gstmpegaudioparse.h:
Implement seeking via average bitrate, and position+duration
querying in mp3parse. Later, it will support frame-accurate seeking by
building a seek table as it parses.
Add 'parsed=false' to the sink pad caps, and 'parsed=true' to the src
pad caps. Bump the priority to PRIMARY+1 so that it is autoplugged
before any extant MP3 decoder plugin. This allows us to remove framing
support from the decoders, if we want, and will provide them with
accurate seeking automatically once it is finished.
Fix the handling of MPEG-1 Layer 1 files.
Partially fix timestamping of packets arriving from a demuxer by
queueing the incoming timestamp until the next packet starts, rather
than applying it immediately to the next pushed buffer.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_sink_event), (gst_lame_chain),
(gst_lame_change_state):
* ext/lame/gstlame.h:
On receiving EOS, we try to push a last buffer with the remaining
samples. Don't do that if we got an unclean flow return on the last
gst_pad_push(), downstream might not handle this very gracefully
(see #403168).
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_chain):
Pass flow returns upstream (helps #403168).
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_chain):
All sample-rates < 32khz come from the LSF extensions, which only
use 1 granule. Fixes parsing of 22.05khz, 24khz and 16khz files.
Use gst_util_uint64_scale because we can.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(mp3_type_frame_length_from_header), (gst_mp3parse_reset),
(gst_mp3parse_init), (gst_mp3parse_dispose),
(gst_mp3parse_sink_event), (gst_mp3parse_chain), (head_check),
(gst_mp3parse_change_state):
* gst/mpegaudioparse/gstmpegaudioparse.h:
Make timestamp handling in mp3parse saner; now works for at least
simple cases.
Original commit message from CVS:
* gst/mpegaudioparse/Makefile.am:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(mp3_type_frame_length_from_header), (gst_mp3parse_class_init),
(gst_mp3parse_reset), (gst_mp3parse_init), (gst_mp3parse_dispose),
(gst_mp3parse_sink_event), (gst_mp3parse_chain), (head_check),
(gst_mp3parse_change_state), (plugin_init):
* gst/mpegaudioparse/gstmpegaudioparse.h:
Bring mp3parse into the 21st century.
Use its own debug category, use gstadapter, format nicely to 80
columns, and fix incorrect handling of 32 kHz and less files.
Original commit message from CVS:
* ext/lame/Makefile.am:
* ext/mpeg2dec/Makefile.am:
* gst/dvdlpcmdec/Makefile.am:
* gst/dvdsub/Makefile.am:
* gst/mpegaudioparse/Makefile.am:
Add missing GST_LIBS to the link flags
Original commit message from CVS:
2006-03-11 Christophe Fergeau <teuf@gnome.org>
Reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* configure.ac:
* gst/xingheader/Makefile.am:
* gst/xingheader/gstxingmux.c:
* gst/xingheader/gstxingmux.h: added new element to add Xing headers
to MP3 files (this allows decoder to figure out the length of VBR
files)
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_sink_event), (gst_mp3parse_chain):
Set correct caps on buffers too.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_init),
(gst_mp3parse_sink_event), (gst_mp3parse_chain):
* gst/mpegaudioparse/gstmpegaudioparse.h:
Put timestamps on buffers.
