Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c: (mp3_caps_create),
(gst_mp3parse_chain):
Don't set new caps on the srcpad everytime the bitrate or MPEG
version changes but calculate new spf value when the MPEG version
changes.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_handle_first_frame), (mp3parse_time_to_bytepos),
(mp3parse_bytepos_to_time):
Interpolate the VBRI seek table entries to get better results,
support 3 byte seek table entries and prevent overflows in the
seek table by adding the relative offsets when using the seek
table in a large enough data type.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_reset),
(gst_mp3parse_handle_first_frame), (mp3parse_time_to_bytepos),
(mp3parse_bytepos_to_time):
* gst/mpegaudioparse/gstmpegaudioparse.h:
Add support for seeking based on the VBRI seek table. Might make
sense to use interpolation in the table later to get hopefully a
bit more accurate values.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_reset),
(gst_mp3parse_emit_frame), (gst_mp3parse_handle_first_frame),
(mp3parse_total_bytes), (mp3parse_total_time):
* gst/mpegaudioparse/gstmpegaudioparse.h:
Add initial support for reading VBRI headers as found in VBR files
created by some Fraunhofer encoders. Currently we only read the
number of frames and bytes (and calculate duration, etc from this)
but there is also a seek table that we currently don't use.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_handle_first_frame):
Guard against 0 values in the Xing header as frame count and
byte count and calculate the bitrate when we have all values
we need and not before.
Original commit message from CVS:
* ext/mad/gstmad.c: (mpg123_parse_xing_header):
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_handle_first_frame):
Make sure that the Xing TOC starts with 0 and the entries
are increasing over time. Otherwise it's broken and should
be skipped. Fixes bug #507821.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_sink_event), (mp3parse_handle_seek):
Don't post SEGMENT_START messages on the bus, only the element
driving the pipeline should do that.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
Restore the segment handling logic.
Please don't do behavioural changes under the heading of 'leak fixes'
or 'whitespace changes', people.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_emit_frame):
Remove some more broken code, it seems to clip even when it should not.
See #491305.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_emit_frame):
When the element is not driving the streaming thread it is not supposed
to emit EOS or post SEGMENT done. It is allowed to return UNEXPECTED
upstream when it detects EOS. See #491305.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c: (mp3parse_time_to_bytepos),
(mp3parse_bytepos_to_time):
Use gst_util_guint64_to_gdouble for conversions.
* win32/vs6/libgstmad.dsp:
Add a link to libgstaudio.
Original commit message from CVS:
* gst/dvdlpcmdec/gstdvdlpcmdec.c:
Add other allowed rates to the pad templates.
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_dispose):
Reset the parser to release memory in dispose.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_sink_event), (gst_mp3parse_emit_frame):
* gst/mpegaudioparse/gstmpegaudioparse.h:
Queue segment event and push it after we know the caps on the pad or
else an autoplugger might not have plugged the element yet and the
segment is lost.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_reset),
(gst_mp3parse_emit_frame), (mp3parse_handle_seek):
* gst/mpegaudioparse/gstmpegaudioparse.h:
Save some memory for each frame by only saving the start timestamp
and start byte position instead of additionally the stop timestamp
and stop byte position. This requires us to use a doubly-linked list
but still saves 8-12 bytes per frame.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_emit_frame):
Fix a calculation that was causing mp3parse to drop every incoming
frame when upstream delivered a segment in TIME format, breaking
playback of all mpeg system streams.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_base_init),
(gst_mp3parse_init):
Use GST_BOILERPLATE instead of manual GType magic.
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_handle_first_frame), (mp3parse_time_to_bytepos),
(mp3parse_bytepos_to_time):
* gst/mpegaudioparse/gstmpegaudioparse.h:
Implement seeking, byte->time, time->byte conversions with the Xing
seek table if available. This allows better at least a bit more
accurate seeks and file position reporting.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_handle_first_frame):
Copy the complete Xing seek table in the 100 byte array instead of
copying the first byte 100 times.
* gst/mpegaudioparse/gstmpegaudioparse.c: (mp3parse_total_bytes),
(mp3parse_total_time), (mp3parse_time_to_bytepos):
Add seeking support based on the Xing header but comment it out for
now as it seems to yield worse result than the other method.
Also use gst_pad_query_peer_duration() instead of getting the peer pad
ourself, creating a new GstQuery, etc.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c: (mp3_caps_create):
Fix "pad caps are not a real subset of its template caps" warning.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_reset),
(gst_mp3parse_emit_frame), (gst_mp3parse_handle_first_frame):
* gst/mpegaudioparse/gstmpegaudioparse.h:
If the Xing header provides a total time, use it to calculate the
correct average bitrate immediately, instead of sending updates as
we parse the stream.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(mp3_type_frame_length_from_header), (gst_mp3parse_reset),
(gst_mp3parse_emit_frame), (gst_mp3parse_handle_first_frame),
(gst_mp3parse_chain), (mp3parse_total_bytes),
(mp3parse_total_time):
* gst/mpegaudioparse/gstmpegaudioparse.h:
Implement parsing of Xing headers from the first frame of the stream,
and use it to report duration correctly where possible.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(mp3_type_frame_length_from_header), (gst_mp3parse_reset),
(gst_mp3parse_init), (gst_mp3parse_sink_event),
(gst_mp3parse_emit_frame), (gst_mp3parse_chain),
(gst_mp3parse_change_state), (mp3parse_time_to_bytepos),
(mp3parse_bytepos_to_time), (mp3parse_total_bytes),
(mp3parse_total_time), (mp3parse_handle_seek),
(mp3parse_src_event), (mp3parse_src_query),
(mp3parse_get_query_types), (plugin_init):
* gst/mpegaudioparse/gstmpegaudioparse.h:
Implement seeking via average bitrate, and position+duration
querying in mp3parse. Later, it will support frame-accurate seeking by
building a seek table as it parses.
Add 'parsed=false' to the sink pad caps, and 'parsed=true' to the src
pad caps. Bump the priority to PRIMARY+1 so that it is autoplugged
before any extant MP3 decoder plugin. This allows us to remove framing
support from the decoders, if we want, and will provide them with
accurate seeking automatically once it is finished.
Fix the handling of MPEG-1 Layer 1 files.
Partially fix timestamping of packets arriving from a demuxer by
queueing the incoming timestamp until the next packet starts, rather
than applying it immediately to the next pushed buffer.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_sink_event), (gst_lame_chain),
(gst_lame_change_state):
* ext/lame/gstlame.h:
On receiving EOS, we try to push a last buffer with the remaining
samples. Don't do that if we got an unclean flow return on the last
gst_pad_push(), downstream might not handle this very gracefully
(see #403168).
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_chain):
Pass flow returns upstream (helps #403168).
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_chain):
All sample-rates < 32khz come from the LSF extensions, which only
use 1 granule. Fixes parsing of 22.05khz, 24khz and 16khz files.
Use gst_util_uint64_scale because we can.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(mp3_type_frame_length_from_header), (gst_mp3parse_reset),
(gst_mp3parse_init), (gst_mp3parse_dispose),
(gst_mp3parse_sink_event), (gst_mp3parse_chain), (head_check),
(gst_mp3parse_change_state):
* gst/mpegaudioparse/gstmpegaudioparse.h:
Make timestamp handling in mp3parse saner; now works for at least
simple cases.
Original commit message from CVS:
* gst/mpegaudioparse/Makefile.am:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(mp3_type_frame_length_from_header), (gst_mp3parse_class_init),
(gst_mp3parse_reset), (gst_mp3parse_init), (gst_mp3parse_dispose),
(gst_mp3parse_sink_event), (gst_mp3parse_chain), (head_check),
(gst_mp3parse_change_state), (plugin_init):
* gst/mpegaudioparse/gstmpegaudioparse.h:
Bring mp3parse into the 21st century.
Use its own debug category, use gstadapter, format nicely to 80
columns, and fix incorrect handling of 32 kHz and less files.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_sink_event), (gst_mp3parse_chain):
Set correct caps on buffers too.
Original commit message from CVS:
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_init),
(gst_mp3parse_sink_event), (gst_mp3parse_chain):
* gst/mpegaudioparse/gstmpegaudioparse.h:
Put timestamps on buffers.
Original commit message from CVS:
2004-01-25 Ronald Bultje <rbultje@ronald.bitfreak.net>
* gst-libs/gst/riff/riff-read.c: (gst_riff_read_info):
Additional pad usability check.
* gst/mpeg1videoparse/gstmp1videoparse.c: (gst_mp1videoparse_init),
(mp1videoparse_find_next_gop), (gst_mp1videoparse_time_code),
(gst_mp1videoparse_real_chain):
Fix MPEG video stream parsing. The original plugin had several
issues, including not timestamping streams where the source was
not timestamped (this happens with PTS values in mpeg system
streams, but MPEG video is also a valid stream on its own so
that needs timestamps too). We use the display time code for that
for now. Also, if one incoming buffer contains multiple valid
frames, we push them all on correctly now, including proper EOS
handling. Lastly, several potential segfaults were fixed, and we
properly sync on new sequence/gop headers to include them in next,
not previous frames (since they're header for the next frame, not
the previous). Also see #119206.
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_chain),
(bpf_from_header):
Move caps setting so we only do it after finding several valid
MPEG-1 fraes sequentially, not right after the first one (which
might be coincidental).
* gst/typefind/gsttypefindfunctions.c: (mpeg1_sys_type_find),
(mpeg_video_type_find), (mpeg_video_stream_type_find),
(plugin_init):
Add unsynced MPEG video stream typefinding, and change some
probability values so we detect streams rightly. The idea is as
follows: I can have an unsynced system stream which contains
video. In the current code, I would randomly get a type for either
system or video stream type found, because the probabilities are
being calculated rather randomly. I now use fixed values, so we
always prefer system stream if that was found (and that is how it
should be). If no system stream was found, we can still identity
the stream as video-only.
Original commit message from CVS:
2003-12-21 Ronald Bultje <rbultje@ronald.bitfreak.net>
* configure.ac:
Improve mpeg2enc detection. This is for distributions that do
ship mjpegtools, but without mpeg2enc. Also does object check
for might there ever be ABI incompatibility.
* ext/mpeg2enc/gstmpeg2enc.cc:
Add Andrew as second maintainer (he's helping me), and also add
an error if no caps was set. This happens if I pull before capsnego
and that's something I should solve sometime else.
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_blockgroup):
Fix time parsing.
* gst/matroska/matroska-mux.c: (gst_matroska_mux_audio_pad_link),
(gst_matroska_mux_track_header):
Add caps to templates.
* gst/mpegaudioparse/gstmpegaudioparse.c: (mp3_sink_factory):
Add mpegversion=1 to prevent confusion with MPEG/AAC.
* gst/mpegstream/gstmpegdemux.c:
Remove layer since it causes warnings about unfixed caps.
* gst/videotestsrc/gstvideotestsrc.c: (gst_videotestsrc_get):
Fix obvious typo (we error out if caps were set, we should of
course error out if *no* caps were set).
* sys/oss/gstosselement.c: (gst_osselement_convert):
Fix format conversion, we confused bits/bytes.
* sys/oss/gstosselement.h:
Improve documentation for 'bps'.
* sys/v4l/TODO:
Remove stuff about plugins that need removing - this was done
ages ago.
* sys/v4l/gstv4lmjpegsrc.c: (gst_v4lmjpegsrc_init),
(gst_v4lmjpegsrc_src_convert), (gst_v4lmjpegsrc_src_query):
* sys/v4l/gstv4lsrc.c: (gst_v4lsrc_init), (gst_v4lsrc_src_convert),
(gst_v4lsrc_src_query):
* sys/v4l2/gstv4l2src.c: (gst_v4l2src_init),
(gst_v4l2src_src_convert), (gst_v4l2src_src_query):
Add get_query_types(), get_formats() and query() functions.
Original commit message from CVS:
merge TYPEFIND branch. Major changes:
- totally reworked type(find) system
- all typefind functions are in gst/typefind now
- more typefind functions then before
- some plugins might fail to compile now because I don't have them installed and they
a) require bytestream or
b) haven't had their typefind fixed.
Please fix those plugins and put the typefind functions into gst/typefind if they don't have dependencies
Original commit message from CVS:
New typefind system:
* bytestream is now part of the core
* all plugins have been modified to use this new typefind system
* asf typefinding added
* mpeg video stream typefiding removed because it's broken
* duplicate typefind entries removed
* extra id3 typefinding added, because we've seen 4 types of files
(riff/wav, flac, vorbis, mp3) with id3 headers and each of these needs
to work. Instead, I've added an id3 element and let it redo typefiding
after the id3 header. this needs a hack because spider only typefinds
once. We can remove this hack once spider supports multiple typefinds.
* with all this, mp3 typefinding is semi-rewritten
* id3 typefinding in flac/vorbis is removed, it's no longer needed
* fixed spider and gst-typefind to use this, too.
* Other general cleanups
Original commit message from CVS:
New mimetypes gone into effect today - this commit changes all old mimetypes over to the new mimetypes spec as described in the previous commit's document. Note: some plugins will break, some pipelines will break, expect HEAD to be broken or at least not 100% working for a few days, but don't forget to report bugs
Original commit message from CVS:
compatibility fix for new GST_DEBUG stuff.
Includes fixes for missing includes for config.h and unistd.h
I only ensured for plugins I can build that they work, so if some of them are still broken, you gotta fix them yourselves unfortunately.
Original commit message from CVS:
* a hack to work around intltool's brokenness
* a current check for mpeg2dec
* details->klass reorganizations
* an element browser that uses details->klass
* separated cdxa parse out from the avi directory
Original commit message from CVS:
* removal of //-style comments
* don't link plugins to core libs -- the versioning is done internally to the plugins with the plugin_info struct,
and symbol resolution is lazy, so we can always know if a plugin can be loaded by the plugin_info data. in theory.
