Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroskademux_do_index_seek),
(gst_matroska_demux_element_send_event),
(gst_matroska_demux_handle_seek_event),
(gst_matroska_demux_handle_src_event):
When receiving a SEEK event on a specific pad first search for a seek
table entry for the stream of the pad and then fall back to an entry
for a different stream.
Original commit message from CVS:
* configure.ac:
* gst/matroska/matroska-ids.c: (gst_matroska_register_tags):
* gst/matroska/matroska-ids.h:
Build depend on core CVS for the attachment tag.
Original commit message from CVS:
* configure.ac:
* gst/matroska/Makefile.am:
* gst/matroska/lzo.c: (get_byte), (get_len), (copy),
(copy_backptr), (lzo1x_decode), (main):
* gst/matroska/lzo.h:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_read_track_encoding),
(gst_matroska_decompress_data), (gst_matroska_decode_data),
(gst_matroska_decode_buffer),
(gst_matroska_decode_content_encodings),
(gst_matroska_demux_read_track_encodings),
(gst_matroska_demux_add_stream),
(gst_matroska_demux_parse_blockgroup_or_simpleblock):
* gst/matroska/matroska-ids.h:
Decode the codec private data and following ContentEncoding if
necessary.
Support bzip2, lzo and header stripped compression. For lzo use the
ffmpeg lzo implementation as liblzo is GPL licensed.
Fix zlib decompression.
Original commit message from CVS:
* gst/matroska/matroska-mux.c:
(gst_matroska_mux_audio_pad_setcaps):
Fix muxing of MP3/MP2 with different MPEG versions by calculating the
duration of a frame with the new mpegaudioversion caps field.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_finalize),
(gst_matroska_demux_class_init), (gst_matroska_demux_init),
(gst_matroska_demux_combine_flows), (gst_matroska_demux_reset),
(gst_matroska_demux_stream_from_num),
(gst_matroska_demux_tracknumber_unique),
(gst_matroska_demux_add_stream), (gst_matroska_demux_send_event),
(gst_matroska_demux_handle_seek_event),
(gst_matroska_demux_sync_streams),
(gst_matroska_demux_parse_blockgroup_or_simpleblock),
(gst_matroska_demux_loop):
* gst/matroska/matroska-demux.h:
Allow an infinite number of stream inside Matroska containers and use
a GPtrArray for storing them instead of allowing "only" 127 streams.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_loop_stream_parse_id):
If no Tracks are found error out instead of trying it again until the
end of time.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_audio_caps):
Fix demuxing of raw integer audio. The samples are unsigned only for 8
bit and signed otherwise, not the other way around.
Original commit message from CVS:
* gst/matroska/matroska-mux.c:
(gst_matroska_mux_audio_pad_setcaps):
Add support for muxing raw float audio now that the spec defines the
endianness and add support for muxing raw integer audio with 24 and
32 bits.
Allow muxing of more than 8 audio channels.
Original commit message from CVS:
* gst/matroska/matroska-mux.c: (gst_matroska_mux_create_uid),
(gst_matroska_mux_reset), (gst_matroska_mux_start):
Add locking to the global array of used track UIDs to prevent random
crashes if more than a single matrosmux instance is used.
Use 64 bit values for the track UIDs.
Use the global GRandom of GLib instead of creating our own one
for the few random numbers we need every single time.
Original commit message from CVS:
* gst/goom/convolve_fx.c:
* gst/goom/filters.c:
* gst/goom/goom_config.h:
* gst/goom/goom_core.c:
* gst/goom/goom_tools.h:
Fix build with MSVC: include glib.h to define inline appropriately,
use header guards where needed.
* gst/udp/gstudpnetutils.c:
* gst/udp/gstudpsrc.c:
Fix build with MSVC: use WSA* constants/functions where appropriate, use
g_snprintf rather than snprintf.
Fixes#544433.
Original commit message from CVS:
* gst/debug/gsttaginject.c:
* gst/debug/gsttaginject.h:
Sent tags in _transform_ip() instead of _start(). Fixes#543404
partially.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (gst_qtdemux_add_stream),
(qtdemux_parse_trak):
Revert ISO base media spec based pixel-aspect-ratio calculation.
Fixes#543300.
Original commit message from CVS:
* gst/udp/gstudpnetutils.c:
EAI_ADDRFAMILY was obsoleted in BSD at some point. Define it to the
old value (1) if it's not defined which should not cause any problems
as we're using it internal only anyway.
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* gst/avi/gstavidemux.c: (gst_avi_demux_riff_parse_vprp):
Fix build of avidemux on big endian architectures.
Original commit message from CVS:
Patch by: Thiago Sousa Santos <thiagoss at lcc dot ufcg dot edu dot br>
* gst/qtdemux/qtdemux.c: (qtdemux_audio_caps):
Correctly distinguish 8bit vs 16bit raw audio. Fixes#542410.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (gst_qtdemux_add_stream),
(qtdemux_parse_trak):
Set pixel-aspect-ratio in caps using display width and height
provided in track.
Original commit message from CVS:
* gst/rtp/gstrtpspeexdepay.c: (gst_rtp_speex_depay_init),
(gst_rtp_speex_depay_process):
* gst/rtp/gstrtpspeexdepay.h:
Revert last change: Only the jitterbuffer is able to convert RTP to
Gstreamer timestamps and normal (de)payloaders should simply copy it.
Reopens bug #541787.
Original commit message from CVS:
* gst/rtp/gstrtpvrawdepay.c:
Include stdlib.h for atoi().
* gst/rtsp/gstrtspsrc.c:
Use floating point math for latencies < 0 sec in log output.
Original commit message from CVS:
Patch by: Tomasz Grobelny <tomasz at grobelny dot oswiecenia dot net>
* gst/rtp/gstrtpspeexdepay.c: (gst_rtp_speex_depay_init),
(gst_rtp_speex_depay_process):
* gst/rtp/gstrtpspeexdepay.h:
Take timestamp from the RTP packet as a first step to fix problems
with transmission over RTP when the network is not reliable.
Fixes bug #541787.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_class_init),
(gst_matroska_demux_add_stream), (gst_matroska_demux_query),
(gst_matroska_demux_element_query),
(gst_matroska_demux_handle_src_query),
(gst_matroska_demux_handle_seek_event):
Handle position and duration query in DEFAULT format if the
pad's track has a default frame duration set.
Fix seeking now that the segment's duration doesn't contain the
(possibly wrong or inaccurate) duration of the Matroska file.
Original commit message from CVS:
* gst/matroska/ebml-read.c: (_ext2dbl):
Use NAN constant instead of 0.0/0.0 if possible. NAN is defined
in math.h except on MSVC where it is defined in xmath.h.
Fixes compilation with MSVC.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_reset),
(gst_matroska_demux_handle_src_query),
(gst_matroska_demux_parse_info),
(gst_matroska_demux_loop_stream_parse_id):
* gst/matroska/matroska-demux.h:
Don't set the segment duration to the duration from the Matroska
header as this value could be wrong and is just informational.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_loop_stream_parse_id):
If no Tracks element is found until the first Cluster is found
search it and error out if none is found in the complete file.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_sync_streams):
Resync non-subtitle tracks too if a too large gap compared to other
tracks is detected.
Original commit message from CVS:
* gst/avi/gstavimux.c: (gst_avi_mux_riff_get_avi_header):
* gst/avi/gstavimux.h:
Add 8 bytes to current streamheader to make for a complete one
and to make more players happy. Fixes#519460.
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_start):
Call getsockname() after the call to bind() to get updated values
for the port, etc. This fixes the usage of udpsrc on anonymous
binding and it's usage by rtspsrc. Fixes bugs #539372, #539548.
Thanks to Aurelien Grimaud for pointing out the obvious fix.
Original commit message from CVS:
2008-06-23 Julien Moutte <julien@fluendo.com>
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_read_track_encoding),
(gst_matroska_demux_parse_blockgroup_or_simpleblock): Fix buggy
format strings in macros. (makes it build on OS X again...)
Original commit message from CVS:
* gst/rtp/gstrtpg726pay.c: (gst_rtp_g726_pay_setcaps):
No need to check for audio/G723 and audio/32KADPCM here as they are
no longer supported.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_add_wvpk_header),
(gst_matroska_demux_audio_caps):
* gst/matroska/matroska-ids.h:
Fix demuxing of WavPack files. Muxing is still broken.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_track_free),
(gst_matroska_demux_add_mpeg_seq_header),
(gst_matroska_demux_add_wvpk_header),
(gst_matroska_demux_check_subtitle_buffer),
(gst_matroska_demux_parse_blockgroup_or_simpleblock),
(gst_matroska_demux_video_caps), (gst_matroska_demux_audio_caps),
(gst_matroska_demux_subtitle_caps):
* gst/matroska/matroska-ids.h:
Add a "vfunc" to the track context for postprocessing frames and
convert the wavpack and subtitle postprocessing to this vfunc.
Copy buffer flags in those functions to the new buffers too.
Parse CodecState elements of Blocks.
Add a postprocessing function for MPEG video that adds the sequence
header from the codec private data or codec state to the frames if
it's not already there.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_blockgroup_or_simpleblock):
If a gap of more than 1/2 second is found in one stream send a
NEWSEGMENT event to not stall the pipeline if the gap is too large.
This also fixes Matroska files where the first buffer doesn't start
at timestamp 0. Fixes bug #429322.
The duration of a block is the default duration multiplied with the
number of laces. Every lace is one frame and the default duration
is the duration of one frame. This fixes playback of files that use
lacing for some tracks.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_contents_seekentry):
Update FIXME/TODOs and only ignore EOS at the central, important place
instead of several places.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_reset),
(gst_matroska_demux_stream_from_num),
(gst_matroska_demux_encoding_cmp),
(gst_matroska_demux_encoding_order_unique),
(gst_matroska_demux_read_track_encoding),
(gst_matroska_demux_read_track_encodings),
(gst_matroska_demux_tracknumber_unique),
(gst_matroska_demux_add_stream), (gst_matroska_demux_init_stream),
(gst_matroska_demux_parse_tracks),
(gst_matroska_demux_parse_index_cuetrack),
(gst_matroska_demux_parse_index_pointentry),
(gst_matroska_demux_parse_index), (gst_matroska_demux_parse_info),
(gst_matroska_demux_parse_metadata_id_simple_tag),
(gst_matroska_demux_parse_metadata_id_tag),
(gst_matroska_demux_parse_metadata),
(gst_matroska_demux_parse_attached_file),
(gst_matroska_demux_parse_attachments),
(gst_matroska_demux_parse_chapters),
(gst_matroska_demux_sync_streams), (gst_matroska_decode_buffer),
(gst_matroska_demux_parse_blockgroup_or_simpleblock),
(gst_matroska_demux_parse_cluster),
(gst_matroska_demux_parse_contents_seekentry),
(gst_matroska_demux_parse_contents),
(gst_matroska_demux_loop_stream_parse_id),
(gst_matroska_demux_loop):
Improve debug output everywhere and fix the EOS logic.
Check the values of the ContentEncoding elements more strictly and
don't use tracks for which it's invalid.
Check that the track number is unique for this stream.
Check that seek positions are below G_MAXINT64 as our seeks are
int64-based and overflows will fail badly.
After seeks also don't push SimpleBlocks until the first one
containing a keyframe is found. Before this was done only for normal
Blocks.
Update some FIXME/TODOs.
* gst/matroska/ebml-read.c: (gst_ebml_read_peek_bytes),
(gst_ebml_read_utf8), (gst_ebml_read_header):
Improve debug output.
* gst/matroska/matroska-ids.c:
(gst_matroska_track_init_video_context):
* gst/matroska/matroska-ids.h:
* gst/matroska/matroska-mux.c:
(gst_matroska_mux_video_pad_setcaps):
Remove eye mode and don't parse it anymore. We can't use that
information in GStreamer yet so it's useless.
Original commit message from CVS:
* gst/rtsp/URLS:
Some more urls.
* gst/smpte/barboxwipes.c:
Add a comment
* tests/examples/rtp/server-v4l2-H264-alsasrc-PCMA.sh:
Fix typo, add audioresample to the pipeline.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_index_compare):
When comparing index elements with the same time compare their
block number.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_attached_file)
Init variable to NULL to avoid compiler warning.
Original commit message from CVS:
* gst/matroska/Makefile.am:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_reset),
(gst_matroska_demux_parse_attached_file),
(gst_matroska_demux_parse_attachments),
(gst_matroska_demux_parse_contents_seekentry),
(gst_matroska_demux_loop_stream_parse_id):
* gst/matroska/matroska-demux.h:
* gst/matroska/matroska-ids.c: (gst_matroska_register_tags):
* gst/matroska/matroska-ids.h:
* gst/matroska/matroska.c: (plugin_init):
Parse Attachments and post them as GST_TAG_IMAGE if we detect
it as image and otherwise as GST_TAG_ATTACHMENT. Include filename
and description of the attachments in the caps. Fixes bug #537622.
Original commit message from CVS:
* gst/matroska/ebml-read.c: (gst_ebml_read_peek_bytes):
Return GST_FLOW_UNEXPECTED instead of GST_FLOW_ERROR on short reads.
If we get less bytes than requested we can't do anything except doing
our EOS logic.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_reset),
(gst_matroskademux_do_index_seek),
(gst_matroska_demux_parse_index_cuetrack),
(gst_matroska_demux_parse_index_pointentry),
(gst_matroska_index_compare), (gst_matroska_demux_parse_index),
(gst_matroska_demux_parse_metadata):
* gst/matroska/matroska-demux.h:
* gst/matroska/matroska-ids.h:
Use a GArray for storing the Cue (i.e. seek) information, store
the CueTrackPositions for every track, store the block number
and optimize searching in the array by sorting it after the last
element was added.
Fix a small memory leak when trying to parse a tags element that was
already parsed.
Original commit message from CVS:
* gst/matroska/matroska-mux.c: (gst_matroska_mux_reset),
(gst_matroska_mux_start), (gst_matroska_mux_finish),
(gst_matroska_mux_write_data):
* gst/matroska/matroska-mux.h:
Don't write another SeekHead which indexes all Clusters to the end of
the file. This isn't useful for anything and just increases filesize.
Original commit message from CVS:
* gst/matroska/ebml-read.c:
* gst/matroska/ebml-read.h:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_reset),
(gst_matroska_demux_parse_metadata):
* gst/matroska/matroska-demux.h:
Make sure that every Tags element is only parsed once and it's
containing tags are only posted once.
Original commit message from CVS:
* gst/matroska/ebml-read.c: (gst_ebml_peek_id),
(gst_ebml_read_header):
* gst/matroska/matroska-demux.c: (gst_matroska_demux_add_stream),
(gst_matroska_demux_parse_tracks),
(gst_matroska_demux_parse_index_cuetrack),
(gst_matroska_demux_parse_index_pointentry),
(gst_matroska_demux_parse_index), (gst_matroska_demux_parse_info),
(gst_matroska_demux_parse_metadata_id_simple_tag),
(gst_matroska_demux_parse_metadata_id_tag),
(gst_matroska_demux_parse_metadata),
(gst_matroska_demux_parse_attachments),
(gst_matroska_demux_parse_chapters),
(gst_matroska_demux_parse_blockgroup_or_simpleblock),
(gst_matroska_demux_parse_cluster),
(gst_matroska_demux_parse_contents_seekentry),
(gst_matroska_demux_parse_contents),
(gst_matroska_demux_loop_stream_parse_id):
Handle EBML elements like Void or CRC32 in the EbmlRead base class
already. They're not useful in the matroska parser and only cause
additional code.
Original commit message from CVS:
* gst/matroska/ebml-read.c: (gst_ebml_level_free),
(gst_ebml_finalize), (gst_ebml_read_change_state),
(gst_ebml_read_element_level_up), (gst_ebml_read_master):
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_contents_seekentry):
Reverse the level list as we usually are only interested in the
first element or want to add a new first element. Having the
first element stored at the end and calling g_list_last() and
g_list_append() is more expensive.
Also use GSlice for allocating the GstEbmlLevel structs.
Original commit message from CVS:
* gst/debug/gsttaginject.c: (gst_tag_inject_finalize),
(gst_tag_inject_class_init), (gst_tag_inject_init):
Don't unref NULL taglist in finalize. Don't use c++ style
comments.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_metadata_id_simple_tag):
* gst/matroska/matroska-mux.c: (gst_matroska_mux_write_simple_tag),
(gst_matroska_mux_write_data):
Use gst_value_serialize() and gst_value_deserialize() for transforming
tags from some GType to a string and the other way around. The default
transformations in GLib don't include transformations from string to
number types.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_reset),
(gst_matroska_demux_parse_tracks),
(gst_matroska_demux_parse_index), (gst_matroska_demux_parse_info),
(gst_matroska_demux_parse_attachments),
(gst_matroska_demux_parse_chapters),
(gst_matroska_demux_parse_contents_seekentry),
(gst_matroska_demux_loop_stream_parse_id):
* gst/matroska/matroska-demux.h:
Only parse Tracks, SeekHead and SegmentInfo elements once but allow
Tags multiple times. The first ones can appear more than once but must
contain the same content as the first for backup purposes so we ignore
all but the first one. Tags can appear multiple times with different
content.
Jump to all elements except Clusters that are available from a
SeekHead to make it more likely to have all required informations
before getting to the first Clusters.
Add dummy functions for parsing Attachments and Chapters.
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init), (gst_udpsrc_init),
(gst_udpsrc_create), (gst_udpsrc_set_property),
(gst_udpsrc_get_property), (gst_udpsrc_start), (gst_udpsrc_stop):
* gst/udp/gstudpsrc.h:
Add property to control automatic join/leave of multicast groups.
Add G_LIKELY.
Remove setting caps on buffers explicitly, basesrc does that for us now.
Improve debug info.
Convert some non-fatal error into warnings.
Use g_ntohs for better portability.
Leave multicast groups when stopping.
When using external sockets, use getsockname() on them to fill up the
addr structure before calling methods that use the structure.
Should all fix#536903.
API: GstUDPSrc::auto-multicast property
Original commit message from CVS:
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_init_send),
(gst_multiudpsink_remove):
Fix a typo and do some small cleanups.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtp/gstrtptheoradepay.c: (gst_rtp_theora_depay_setcaps):
Make the delivery-method mandatory on the caps and only accept inline
for now.
Reverse strcmp checks for delivery-method.
* gst/rtp/gstrtpvorbisdepay.c: (gst_rtp_vorbis_depay_setcaps):
Make delivery method optional when parsing caps and note this in the
caps.
Reverse strcmp checks for delivery-method.
* gst/rtp/gstrtpvorbispay.c:
Update a comment to note that the delivery-method is optional,
Fixes#537675.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_stream_configure_mcast):
Set udpsrc for receiving data from multicast groups to PAUSED instead of
leaving them in READY. Fixes#537832.
Original commit message from CVS:
* gst/avi/gstavimux.c:
Simplify code. gst_tag_list_merge() does the NULL checks. Add a FIXME
for a random constant in tagmuxing code.
Original commit message from CVS:
* gst/matroska/matroska-mux.c: (gst_matroska_mux_request_new_pad),
(gst_matroska_mux_release_pad), (gst_matroska_mux_write_data):
Update the counter for the number of streams when pads are added or
removed. This will make sure that a seek table is generated for
files with just one audio stream.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_metadata_id_simple_tag):
* gst/matroska/matroska-ids.h:
* gst/matroska/matroska-mux.c: (gst_matroska_mux_write_simple_tag):
Add some more tags, improve debugging a bit and make sure that
GValue transformation has succeeded before using the result
as a tag.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtp/gstrtptheorapay.c:
The Theora RTP payloader only supports the "inline" delievery method
so let's declare this on the caps of the static pad template.
Fixes bug #537675.
Original commit message from CVS:
* gst/videomixer/videomixer.c: (gst_videomixer_fill_queues),
(gst_videomixer_blend_buffers):
Use stream_time to synchronize the object properties.
Use running_time of the master pad to timestamp outgoing buffers.
Fix the initial segment event to extend an unknown amount of time.
Fixes#537361.
Original commit message from CVS:
* gst/avi/gstavidemux.c: (gst_avi_demux_parse_stream),
(gst_avi_demux_parse_index), (gst_avi_demux_massage_index),
(gst_avi_demux_calculate_durations_from_index),
(gst_avi_demux_stream_header_push),
(gst_avi_demux_stream_header_pull):
Try to ignore unparsable/unknown streams and give a warning instead of
erroring out. Fixes#537377.
Original commit message from CVS:
* gst/matroska/ebml-write.c: (gst_ebml_write_float):
Use GDOUBLE_TO_BE() instead of (probably slower) custom code.
* gst/matroska/matroska-demux.c: (gst_matroska_demux_base_init),
(gst_matroska_demux_class_init), (gst_matroska_demux_init),
(gst_matroska_track_free), (gst_matroska_demux_encoding_cmp),
(gst_matroska_demux_read_track_encodings),
(gst_matroska_demux_add_stream),
(gst_matroska_demux_handle_src_query),
(gst_matroska_demux_init_stream),
(gst_matroska_demux_parse_index_cuetrack),
(gst_matroska_demux_parse_index_pointentry),
(gst_matroska_demux_parse_info),
(gst_matroska_demux_parse_metadata_id_simple_tag),
(gst_matroska_demux_parse_metadata),
(gst_matroska_demux_add_wvpk_header), (gst_matroska_decode_buffer),
(gst_matroska_demux_parse_blockgroup_or_simpleblock),
(gst_matroska_demux_parse_cluster),
(gst_matroska_demux_parse_contents_seekentry),
(gst_matroska_demux_loop_stream_parse_id),
(gst_matroska_demux_loop), (gst_matroska_demux_video_caps),
(gst_matroska_demux_audio_caps),
(gst_matroska_demux_subtitle_caps):
* gst/matroska/matroska-demux.h:
* gst/matroska/matroska-ids.c:
(gst_matroska_track_init_subtitle_context):
* gst/matroska/matroska-ids.h:
* gst/matroska/matroska-mux.c: (gst_matroska_mux_base_init),
(gst_matroska_mux_class_init), (gst_matroska_mux_init),
(gst_matroska_mux_create_uid), (gst_matroska_mux_reset),
(gst_matroska_mux_video_pad_setcaps),
(gst_matroska_mux_audio_pad_setcaps),
(gst_matroska_mux_subtitle_pad_setcaps),
(gst_matroska_mux_request_new_pad),
(gst_matroska_mux_track_header), (gst_matroska_mux_start),
(gst_matroska_mux_write_simple_tag), (gst_matroska_mux_finish),
(gst_matroska_mux_write_data), (gst_matroska_mux_collected),
(gst_matroska_mux_set_property):
Add many FIXMEs/TODOs all over the matroska muxer and demuxer
elements, do some checks for valid values in the demuxer, handle
tracktimecodescale in the demuxer, set correct default values for all
settings in the demuxer, review and add all missing matroska
IDs and some more raw YUV formats, and some trivial cleanup.
Original commit message from CVS:
* gst/interleave/deinterleave.c: (gst_deinterleave_add_new_pads),
(gst_deinterleave_src_query):
* gst/interleave/interleave.c: (gst_interleave_src_query_duration),
(gst_interleave_src_query):
Properly implement duration and position queries in bytes format. We
have to take the upstream reply and divide/multiply it by the number
of channels to get the correct result.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_stream_configure_udp_sink):
Use the new gst_rtsp_connection_get_ip() to access the IP address
of a GstRTSPConnection since it is a private member.
Original commit message from CVS:
* ext/flac/gstflacdec.c: (gst_flac_extract_picture_buffer):
* gst/id3demux/id3v2frames.c: (parse_picture_frame):
Use new utility functions in libgsttag to process coverart (#512333).
Original commit message from CVS:
* gst/matroska/ebml-write.c: (gst_ebml_write_finalize),
(gst_ebml_write_set_cache):
Unref the write cache in finalize if it was set and add add "FIXME"
to a comment that needs it.
Original commit message from CVS:
* gst/interleave/interleave.c: (gst_interleave_pad_get_type),
(gst_interleave_pad_get_property), (gst_interleave_pad_class_init),
(gst_interleave_request_new_pad), (gst_interleave_release_pad):
* gst/interleave/interleave.h:
Use an always increasing integer for the number in the name of the
requested sink pads to guarantuee a unique name. Add a "channel"
property to GstInterleavePad to make it possible for applications
to retrieve the channel number in the output for every pad.
Use g_type_register_static_simple() instead of
g_type_register_static() to save some relocations.
Original commit message from CVS:
* gst/interleave/interleave.c: (gst_interleave_pad_get_type),
(gst_interleave_change_state):
Stop GstCollectPads before calling the parent's state change function
when going from PAUSED to READY as we otherwise deadlock.
Fixes bug #536258.
Original commit message from CVS:
* gst/interleave/interleave.c:
(gst_interleave_check_channel_positions),
(gst_interleave_set_channel_positions),
(gst_interleave_class_init):
Use new gst_audio_check_channel_positions() function and register
the GstInterleavePad type from a threadsafe context.
Original commit message from CVS:
* gst/interleave/interleave.c: (gst_interleave_pad_get_type),
(gst_interleave_finalize), (gst_audio_check_channel_positions),
(gst_interleave_set_channel_positions),
(gst_interleave_class_init), (gst_interleave_init),
(gst_interleave_set_property), (gst_interleave_get_property),
(gst_interleave_request_new_pad), (gst_interleave_release_pad),
(gst_interleave_sink_setcaps), (gst_interleave_src_query_duration),
(gst_interleave_src_query_latency), (gst_interleave_collected):
* gst/interleave/interleave.h:
Allow setting channel positions via a property and allow using the
channel positions on the input as the channel positions of the output.
Fix some broken logic and memory leaks.
* tests/check/Makefile.am:
* tests/check/elements/interleave.c: (src_handoff_float32),
(sink_handoff_float32), (GST_START_TEST), (interleave_suite):
Add unit tests for checking correct handling of channel positions.
Original commit message from CVS:
* gst/videomixer/videomixer.c: (gst_videomixer_query_duration),
(gst_videomixer_query_latency):
When using gst_element_iterate_pads() one has to unref every pad
after usage.
Original commit message from CVS:
2008-05-31 Julien Moutte <julien@fluendo.com>
* gst/qtdemux/qtdemux.c: (gst_qtdemux_find_keyframe),
(gst_qtdemux_find_segment), (gst_qtdemux_perform_seek),
(gst_qtdemux_seek_to_previous_keyframe),
(gst_qtdemux_activate_segment), (gst_qtdemux_loop): Make sure we
we don't clip the segment's stop using the main segment duration
as
that could crop quite some video frames. Make reverse playback
support
more robust and support edit lists. Support seeking to the last
frame,
and fix reverse looping playback. Add some debugging.
* win32/common/config.h: Updated.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer.c:
(gst_iir_equalizer_transform_ip):
Don't clip float/double samples, correctly unset passthrough mode
and use better rounding for integer samples.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer.c:
(gst_iir_equalizer_band_set_property), (gst_iir_equalizer_init),
(setup_filter), (set_passthrough), (update_coefficients),
(gst_iir_equalizer_compute_frequencies),
(gst_iir_equalizer_transform_ip):
* gst/equalizer/gstiirequalizer.h:
Update the filter coefficients only when needed in the transform_ip
function and correctly set the element into passthrough mode if the
gain of all bands is 0.
Original commit message from CVS:
Based on patch by: Sebastian Keller <sebastian-keller at gmx dot de>
* gst/alpha/gstalpha.c: (gst_alpha_class_init), (gst_alpha_init),
(gst_alpha_set_property), (gst_alpha_get_property),
(gst_alpha_chroma_key_ayuv), (gst_alpha_chromakey_row_i420):
Try to skip pixels or areas that are too dark or too bright for us to do
meaningfull color detection.
Added properties to control the sensitivity to light and darkness.
Added some small cleanups. Fixes#512345.
Original commit message from CVS:
* gst/videomixer/videomixer.c: (gst_videomixer_reset),
(gst_videomixer_init), (gst_videomixer_query_duration),
(gst_videomixer_query_latency), (gst_videomixer_query),
(gst_videomixer_blend_buffers):
* gst/videomixer/videomixer.h:
Implement position (in time), duration and latency queries.
Original commit message from CVS:
Patch by: j^ <j at oil21 dot org>
* gst/qtdemux/qtdemux.c: (qtdemux_video_caps):
Add caps for DVCPRO50 and DVCPRO HD PAL/NTSC. See #526481.
Original commit message from CVS:
* gst/interleave/deinterleave.c:
Add another example launch line.
* gst/interleave/interleave.c: (interleave_24),
(gst_interleave_finalize), (gst_interleave_base_init),
(gst_interleave_class_init), (gst_interleave_init),
(gst_interleave_request_new_pad), (gst_interleave_release_pad),
(gst_interleave_change_state), (__remove_channels),
(__set_channels), (gst_interleave_sink_getcaps),
(gst_interleave_set_process_function),
(gst_interleave_sink_setcaps), (gst_interleave_sink_event),
(gst_interleave_src_query_duration), (gst_interleave_src_query),
(forward_event_func), (forward_event), (gst_interleave_src_event),
(gst_interleave_collected):
* gst/interleave/interleave.h:
Major rewrite of interleave using GstCollectpads. This new version
also supports almost all raw audio formats and has better caps
negotiation. Fixes bug #506594.
Also update docs and add some more examples.
* tests/check/elements/interleave.c: (interleave_chain_func),
(GST_START_TEST), (src_handoff_float32), (sink_handoff_float32),
(interleave_suite):
Add some more extensive unit tests for interleave.
Original commit message from CVS:
* gst/interleave/deinterleave.c: (gst_deinterleave_base_init),
(gst_deinterleave_class_init), (gst_deinterleave_init),
(gst_deinterleave_add_new_pads), (gst_deinterleave_sink_getcaps):
* gst/interleave/deinterleave.h:
Don't set a getcaps() function on the src pads as it's not required
and the default getcaps() function returns the correct results for
our src pads.
Complete documentation and add myself to the authors of the element.
Original commit message from CVS:
* gst/udp/Makefile.am:
Add -D_GNU_SOURCE to CFLAGS so we get things like EAI_ADDRFAMILY
when including netdb.h when building against glibc >= 2.8.
Original commit message from CVS:
2008-05-22 Julien Moutte <julien@fluendo.com>
* gst/smpte/gstsmptealpha.c: (gst_smpte_alpha_setcaps): Fix
debug statement arguments.
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_setup_qos_dscp):
* gst/udp/gstudpnetutils.c: (gst_udp_join_group),
(gst_udp_leave_group): Fix IP and IPV6 options to make it work
on more platforms.
Original commit message from CVS:
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_init_send),
(gst_multiudpsink_add_internal):
* gst/udp/gstudpnetutils.c: (gst_udp_set_loop_ttl),
(gst_udp_join_group):
* gst/udp/gstudpnetutils.h:
* gst/udp/gstudpsrc.c: (gst_udpsrc_start):
Joining a multicast group and setting the loop/ttl properties are
totally unrelated tasks are must be separated.
Original commit message from CVS:
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_class_init),
(gst_multiudpsink_setup_qos_dscp), (gst_multiudpsink_add_internal):
* gst/udp/gstmultiudpsink.h:
Add a fixme for the auto-multicast property.
Fix some confusing debug messages.
Disable setting a qos value by default.
Original commit message from CVS:
Patch by: Gustaf Räntilä <g dot rantila at gmail dot com>
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_render):
Ignore EPERM errors from sendto. Fixes#533619.
Original commit message from CVS:
Patch by: Henrik Eriksson <henriken at axis dot com>
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_class_init),
(gst_multiudpsink_init), (gst_multiudpsink_setup_qos_dscp),
(gst_multiudpsink_set_property), (gst_multiudpsink_get_property),
(gst_multiudpsink_init_send), (gst_multiudpsink_add_internal):
* gst/udp/gstmultiudpsink.h:
Add qos-dscp property to manage the Quality of service.
Original commit message from CVS:
Patch by: Bruno Santos <brunof at ua dot pt>
* gst/udp/gstudpnetutils.c: (gst_udp_get_addr),
(gst_udp_join_group), (gst_udp_leave_group),
(gst_udp_is_multicast):
* gst/udp/gstudpnetutils.h:
Provide a bunch of helper methods to deal with IPv4 and IPv6
transparently.
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_class_init),
(gst_multiudpsink_init), (gst_multiudpsink_set_property),
(gst_multiudpsink_get_property), (join_multicast),
(gst_multiudpsink_init_send), (gst_multiudpsink_add_internal),
(gst_multiudpsink_remove):
* gst/udp/gstmultiudpsink.h:
Add multicast TTL and loopback properties.
Use the helper methods to implement ip4 and ip6.
* gst/udp/gstudpsrc.c: (gst_udpsrc_create), (gst_udpsrc_start):
* gst/udp/gstudpsrc.h:
Use the helper methods to implement ip4 and ip6.
Fixes#515962.
Original commit message from CVS:
Patch by: Patrick Radizi <patrick dot radizi at axis dot com>
* gst/multipart/multipartdemux.c: (gst_multipart_demux_class_init),
(gst_multipart_demux_get_gstname),
(gst_multipart_find_pad_by_mime), (gst_multipart_demux_chain):
* gst/multipart/multipartdemux.h:
Don't blindly copy the mime-type as the caps name because they not
always map directly. Instead use a hashtable with common mappings.
Fixes#533287.
Original commit message from CVS:
* gst/rtp/gstrtph264depay.c: (gst_rtp_h264_depay_class_init),
(gst_rtp_h264_depay_init), (gst_rtp_h264_depay_set_property),
(gst_rtp_h264_depay_get_property), (gst_rtp_h264_depay_setcaps),
(gst_rtp_h264_depay_process):
* gst/rtp/gstrtph264depay.h:
Add experimental support for outputting quicktime-like AVC output in
addition to the existing bytestream output.
* gst/rtp/gstrtph264pay.c: (gst_h264_scan_mode_get_type),
(gst_rtp_h264_pay_class_init), (gst_rtp_h264_pay_init),
(gst_rtp_h264_pay_setcaps), (gst_rtp_h264_pay_payload_nal),
(gst_rtp_h264_pay_handle_buffer), (gst_rtp_h264_pay_set_property),
(gst_rtp_h264_pay_get_property):
* gst/rtp/gstrtph264pay.h:
Make the parsing mode configurable, for some inputs we don't need to
scan every byte for start codes.
Only set the marker bit on ACCESS units.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer.c:
Use a bigger type in integer mode for the intermediate results to
prevent overflows. This fixes the crippled sound when using the
equalizer in integer mode. Fixes bug #510865.
Original commit message from CVS:
* gst/videomixer/videomixer.c:
* gst/videomixer/videomixer.h:
Instead of a random number for the request pad id's,
use a counter.
Register the videomixerpad class from the element's class_init
where it's safer, and allows the docs generator to scan it.
Original commit message from CVS:
* gst/smpte/Makefile.am:
* gst/smpte/gstsmpte.c: (gst_smpte_plugin_init):
* gst/smpte/gstsmpte.h:
* gst/smpte/gstsmptealpha.c:
(gst_smpte_alpha_transition_type_get_type),
(gst_smpte_alpha_get_type), (gst_smpte_alpha_base_init),
(gst_smpte_alpha_class_init), (gst_smpte_alpha_update_mask),
(gst_smpte_alpha_setcaps), (gst_smpte_alpha_get_unit_size),
(gst_smpte_alpha_init), (gst_smpte_alpha_finalize),
(gst_smpte_alpha_do_ayuv), (gst_smpte_alpha_do_i420),
(gst_smpte_alpha_transform), (gst_smpte_alpha_set_property),
(gst_smpte_alpha_get_property), (gst_smpte_alpha_plugin_init):
* gst/smpte/gstsmptealpha.h:
* gst/smpte/plugin.c: (plugin_init):
Add new plugin that adds the SMPTE transition in the alpha channel of
I420 and AYUV frames so that they can be blended with videomixer later
on. Uses all niceties such as using base transform for efficient alloc
and negotiation. It currently requires GstController to control the
position in the transition effect.
Original commit message from CVS:
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/gst-plugins-good-plugins.hierarchy:
* docs/plugins/gst-plugins-good-plugins.interfaces:
* docs/plugins/gst-plugins-good-plugins.types:
* gst/videomixer/videomixer.c:
Try using thaytans new mechanism to get extra classes into plugin
docs. Aparently works for the Eq. For VideoMixer the GObject stuff is
missing still.
Original commit message from CVS:
* gst/interleave/deinterleave.c: (gst_deinterleave_class_init),
(gst_deinterleave_init), (gst_deinterleave_add_new_pads),
(gst_deinterleave_set_pads_caps), (gst_deinterleave_set_property),
(gst_deinterleave_get_property):
* gst/interleave/deinterleave.h:
Add a property to select whether channel positions should be kept on
the mono output buffers or should be dropped.
Original commit message from CVS:
* gst/avi/gstavimux.c: (gst_avi_mux_audsink_set_caps):
Set proper rate in avi stream header for PCM audio, and also do some
more sanity checks on caps in this case. Fixes#511489.
Original commit message from CVS:
* gst/interleave/deinterleave.c: (gst_deinterleave_finalize),
(gst_deinterleave_init), (gst_deinterleave_sink_event),
(gst_deinterleave_process), (gst_deinterleave_sink_activate_push):
* gst/interleave/deinterleave.h:
Queue events until src pads were added and they can be sent. Otherwise
downstream will never get the first newsegment event.
Original commit message from CVS:
* gst/interleave/deinterleave.c: (gst_deinterleave_sink_setcaps),
(gst_deinterleave_getcaps):
Always set the channel positions when gst_audio_get_channel_positions()
returns something, even if they're not set in the caps. This makes
sure that the output channels can be interleaved again correctly
in the mono/stereo cases too.
Don't ask for the peercaps of the current pad in getcaps() as this
might call getcaps() again and deadlock.
Original commit message from CVS:
* gst/interleave/Makefile.am:
* gst/interleave/deinterleave.c: (deinterleave_24),
(gst_deinterleave_finalize), (gst_deinterleave_base_init),
(gst_deinterleave_class_init), (gst_deinterleave_init),
(gst_deinterleave_add_new_pads), (gst_deinterleave_set_pads_caps),
(gst_deinterleave_set_process_function),
(gst_deinterleave_sink_setcaps), (__remove_channels),
(__set_channels), (gst_deinterleave_getcaps),
(gst_deinterleave_process), (gst_deinterleave_chain),
(gst_deinterleave_sink_activate_push):
* gst/interleave/deinterleave.h:
Add support for all raw audio formats and provide better negotiation
if the caps are changing.
Don't allow changes of the channel positions and set the position of
the corresponding channel on the src pad caps.
General cleanup and smaller bugfixes.
* tests/check/elements/deinterleave.c: (float_buffer_check_probe):
Check the channel positions on the output buffer caps.
Original commit message from CVS:
* gst/rtp/gstrtph264depay.c: (gst_rtp_h264_depay_process):
Small comment added.
* gst/rtp/gstrtph264pay.c: (gst_rtp_h264_pay_class_init),
(gst_rtp_h264_pay_decode_nal), (gst_rtp_h264_pay_parse_sps_pps),
(gst_rtp_h264_pay_payload_nal), (gst_rtp_h264_pay_handle_buffer):
Debug string cleanups (remove trailing \n)
Refactor and clean up the payloader a bit and make sure that we only
put one NAL unit in an RTP packet even if the input buffer contains
multiple NAL units.
Add suport for AVC format input.
Original commit message from CVS:
* gst/rtp/gstrtph264pay.c: (gst_rtp_h264_pay_class_init),
(gst_rtp_h264_pay_finalize), (gst_rtp_h264_pay_handle_buffer),
(gst_rtp_h264_pay_set_property), (gst_rtp_h264_pay_get_property):
* gst/rtp/gstrtph264pay.h:
Make it possible to specify profile-level-id and sprop-parameter-sets
using properties in case they are not available in-stream.
Original commit message from CVS:
* gst/interleave/Makefile.am:
* gst/interleave/deinterleave.h:
* gst/interleave/interleave.h:
* gst/interleave/plugin.h:
Split definitions into separate header files for better documentation
generation.
* gst/interleave/deinterleave.c: (gst_deinterleave_base_init),
(gst_deinterleave_class_init), (gst_deinterleave_sink_setcaps),
(gst_deinterleave_process):
Don't use alloca, allow caps changes as long as the number of channels
does not change, don't use g_warning, return NOT_NEGOTIATED as early
as possible and some other cleanup.
* gst/interleave/interleave.c: (gst_interleave_base_init),
(gst_interleave_class_init):
Do some random cleanup.
* tests/check/Makefile.am:
* tests/check/elements/deinterleave.c: (GST_START_TEST),
(deinterleave_chain_func), (deinterleave_pad_added),
(deinterleave_suite):
Add unit tests for the deinterleave element.
Original commit message from CVS:
* gst/avi/gstavimux.c: (gst_avi_mux_start_file):
Send an initial BYTE segment to inform downstream of later seeking,
and to forego sync attempts.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_push_dvd_clut_change_event):
Convert subtitle palette info in VobSub private data from VobSub's
(buggy) RGB to YUV.
Original commit message from CVS:
* gst/avi/gstavimux.c: (gst_avi_mux_pad_reset):
Do not leave fourcc stream header field empty upon reset.
Fixes#519301.
Original commit message from CVS:
Based on patch by: Wouter Cloetens <wouter at mind be>
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_init),
(gst_rtspsrc_skip_lws), (gst_rtspsrc_unskip_lws),
(gst_rtspsrc_skip_commas), (gst_rtspsrc_skip_item),
(gst_rtsp_decode_quoted_string),
(gst_rtspsrc_parse_digest_challenge), (gst_rtspsrc_parse_auth_hdr),
(gst_rtspsrc_setup_auth):
Support Digest authentication. Fixes#532065.
Original commit message from CVS:
* gst/level/gstlevel.c:
Also support 32bit (e.g. whe having it after 'mad'). Add more notes
about whats needed for liboil acceleration. Simplify docs a bit.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* gst/matroska/matroska-mux.c: (gst_matroska_mux_collected):
Update the track duration if the old one was invalid.
Fixes bug #532117.
Original commit message from CVS:
* gst/rtp/gstrtph264pay.c (gst_rtp_h264_pay_parse_sps_pps):
Use GST_STR_NULL when trying to print sps and pps strings that could
be NULL, as this might crash on some platforms.
Original commit message from CVS:
* gst/rtp/gstrtpilbcpay.c:
Added missing stdlib.h include for strtol(), and made include ordering and
style consistent with the corresponding depayloader.
Original commit message from CVS:
* gst/rtp/gstrtph263pdepay.c: (gst_rtp_h263p_depay_process):
Add some more debug info and guard against small payloads.
* gst/rtp/gstrtppcmudepay.c: (gst_rtp_pcmu_depay_process):
Set duration on outgoing buffers because we can.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtp/gstrtpspeexpay.c: (gst_rtp_speex_pay_class_init),
(gst_rtp_speex_pay_getcaps):
Add negotiation for the speec channels and rate. See #465146.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtp/gstrtpilbcpay.c: (gst_rtpilbcpay_class_init),
(gst_rtpilbcpay_sink_setcaps), (gst_rtpilbcpay_sink_getcaps):
Add negotiation for the ILBC mode. See #465146.
Original commit message from CVS:
Patch by: Youness Alaoui <youness.alaoui at collabora co uk>
* gst/udp/gstudpsrc.c: (gst_udpsrc_create):
Don't error out if we get an ICMP destination-unreachable
message when trying to read packets on win32 (#529454).
Original commit message from CVS:
* configure.ac:
* gst/qtdemux/qtdemux.c: (qtdemux_parse_trak):
Use new error code for encrypted streams (which requires core CVS).
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (gst_qtdemux_videosrc_template),
(gst_qtdemux_audiosrc_template):
Fix swapped pad template names, spotted by Thiago Sousa Santos.
Original commit message from CVS:
2008-04-28 Julien Moutte <julien@fluendo.com>
* gst/debug/rndbuffersize.c: (gst_rnd_buffer_size_loop): Fix printf
format to pacify Mac OSX's gcc.
Original commit message from CVS:
* gst/debug/rndbuffersize.c: (DEFAULT_SEED), (DEFAULT_MIN),
(DEFAULT_MAX), (src_template), (sink_template),
(gst_rnd_buffer_size_base_init), (gst_rnd_buffer_size_class_init),
(gst_rnd_buffer_size_init), (gst_rnd_buffer_size_activate),
(gst_rnd_buffer_size_loop), (gst_rnd_buffer_size_plugin_init):
Bring rndbuffersize element into a state that doesn't require us
to move it to -bad immediately. For one, fix up default min/max
values so that the element actuall works using the default values.
Also, don't ignore flow return values and do some kind of minimal
eos logic. Allow min=max to pull fixed-sized buffers. Bunch of
other gratuitious clean-ups.
Original commit message from CVS:
* gst/rtp/gstasteriskh263.c: (gst_asteriskh263_chain):
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_add_internal):
* gst/udp/gstudpsrc.c: (gst_udpsrc_start):
Use GLib versions of htonl, htons, ntohl and ntohs in order
to avoid problems on win32 (#529707).
Original commit message from CVS:
Patch by: Jesús Corrius <jesus at softcatala org>
* gst/goom/filters.c: (zoomVector):
* gst/goom/goom_core.c: (init_buffers):
Fix build with mingw32: use rand() instead of random() and
replace bzero() with memset(). Fixes#529692.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_init), (request_pt_map),
(gst_rtspsrc_configure_caps):
Ref caps as the return value for the request_pt_map signal.
Remove some caps weirdness when configuring a stream. See #528245.
Original commit message from CVS:
* gst/goom/plugin_info.c: (setOptimizedMethods):
Disable altivec optimisations for 32-bit PPC as well to make
things build properly on all PPC systems. Fixes#528143
Original commit message from CVS:
* gst/goom/ppc_drawings.s:
* gst/goom/ppc_zoom_ultimate.s:
Change license of these files to LGPL, as permitted by the
author, Guillaume Borios. See #515073.
Original commit message from CVS:
* gst/goom/convolve_fx.c:
* gst/goom/motif_goom1.h:
* gst/goom/motif_goom2.h:
As hinted in Bug #518213, revert one change and fix warnings properly.
This fixes both #518213 and #520073 for me.
Original commit message from CVS:
* gst/matroska/ebml-read.c: (gst_ebml_read_seek):
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_handle_seek_event),
(gst_matroska_demux_parse_contents_seekentry),
(gst_matroska_demux_loop):
Fix the Forte build by making function declaration signatures
match the implementations.
Original commit message from CVS:
2008-04-07 Julien Moutte <julien@fluendo.com>
* gst/rtp/gstrtph264pay.c: (gst_rtp_h264_pay_setcaps): Fix build
because of a bad argument number.
Original commit message from CVS:
* gst/rtp/gstrtph264pay.c: (encode_base64),
(gst_rtp_h264_pay_setcaps), (gst_rtp_h264_pay_handle_buffer):
* gst/rtp/gstrtph264pay.h:
Parse codec_data for future AVC compatibility.
Fail when we encounter AVC data for now.
Original commit message from CVS:
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_set_property),
(gst_spectrum_get_property), (gst_spectrum_message_new):
Rename property enums and default defines for the properties to match
the property names and rephrase property descriptions to make them a
bit clearer (hopefully). See #518188.
Original commit message from CVS:
Based on patch by: mersad <mersad at axis dot com>
* gst/law/alaw-decode.c: (gst_alaw_dec_sink_setcaps),
(gst_alaw_dec_chain), (gst_alaw_dec_change_state):
* gst/law/alaw-decode.h:
* gst/law/alaw-encode.c: (gst_alaw_enc_chain):
* gst/law/mulaw-decode.c: (mulawdec_sink_setcaps),
(gst_mulawdec_chain), (gst_mulawdec_change_state):
* gst/law/mulaw-decode.h:
* gst/law/mulaw-encode.c: (gst_mulawenc_chain):
Make negotiation a bit modern.
Use pad_alloc. Fixes#525359.
Original commit message from CVS:
* gst/goom/Makefile.am:
Remove ppc assembler optimisations from the build until they
actually build (they also seem to have GPL headers).
Original commit message from CVS:
* gst/freeze/FAQ:
* gst/freeze/Makefile.am:
* gst/freeze/gstfreeze.c:
Add example to source code documentation blob and remove the 3 line
FAQ.
* gst/interleave/interleave.c:
Add a source code documentation blob.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_init),
(gst_rtspsrc_finalize):
Call WSAStartup() and WSACleanup before using the Winsock API.
See #520808.
Original commit message from CVS:
* gst/goom/plugin_info.c:
* gst/goom/ppc_zoom_ultimate.h:
Small fixes to build more on PPC: ifdef out code that uses unknown
define; add newline at end of header file to avoid compiler warning.
Assembler code still doesn't build though.
Original commit message from CVS:
* gst/avi/gstavidemux.c:
Fix up my last commit. Use G_GUINT32_FORMAT for the guint32 debug log.
Also downgrade a GST_WARNING to GST_DEBUG and add a comment.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (gst_qtdemux_perform_seek),
(gst_qtdemux_activate_segment),
(gst_qtdemux_prepare_current_sample),
(gst_qtdemux_loop_state_movie), (qtdemux_parse_trak):
Make sure we always send a DISCONT after a seek by setting the sample
index to an undefined value after a seek.
Original commit message from CVS:
* gst/avi/gstavisubtitle.h: (GST_IS_AVI_SUBTITLE),
(GST_IS_AVI_SUBTITLE_CLASS):
Fix up IS_FOO macros, which makes gtk-doc much happier.
Original commit message from CVS:
* gst/matroska/ebml-ids.h:
Add ID for EBML CRC32 elements.
* gst/matroska/Makefile.am:
* gst/matroska/ebml-read.c: (gst_ebml_finalize),
(gst_ebml_read_class_init), (gst_ebml_read_peek_bytes),
(gst_ebml_read_get_length), (_ext2dbl), (gst_ebml_read_float),
(gst_ebml_read_header):
Support reading 80bit floats, add finalize method to clean up
in any case, support reading length/id elements with any length
as long as it's smaller than our supported maximum, don't leak
buffers if reading as much data as we wanted failed and some
smaller cleanup.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtp/gstrtph263pdepay.c: (gst_rtp_h263p_depay_process):
Check that a buffer is large enough before reading from it.
Fixes bug #521102.
Original commit message from CVS:
* configure.ac:
* gst/audiofx/Makefile.am:
* gst/audiofx/audiochebband.c:
* gst/audiofx/audiocheblimit.c:
* gst/audiofx/math_compat.h:
Check for sinh(), cosh() and asinh() and define our own
implementations if they're not available. Fixes bug #520880.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst/udp/gstudpsrc.c: (gst_udpsrc_finalize), (gst_udpsrc_start),
(gst_udpsrc_stop):
Properly balance WSA_Cleanup with WSA_Startup.
Also make the poll controllable on windows. Fixes#520888.
Original commit message from CVS:
* gst/matroska/ebml-read.c:
Use GINT64 formatting constants from GLIB.
* gst/matroska/matroska-demux.c:
Add some guards to avoid a possible division by 0 and crashing
with NULL events on some systems.
Use gst_gdouble_to_guint64 somewhere instead of an implicit
conversion.
* gst/matroska/matroska-mux.c:
Check for invalid timestamps in a bunch of places to avoid
writing bogus durations into the output file.
Fix some double<->gint64 conversions that weren't using
gst_guint64_to_gdouble
Original commit message from CVS:
* gst/videomixer/videomixer.c: (gst_videomixer_blend_buffers):
Don't call gst_object_sync_values() unless we have a valid timestamp.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
* gst/matroska/matroska-ids.h:
* gst/matroska/matroska-mux.c:
Fix Dirac mapping. I had previously added a VfW-type
mapping, but it looks like Dirac will get a native Matroska
mapping, and this is the most likely method.
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis com>
* gst/udp/gstudpsrc.c: (gst_udpsrc_init), (gst_udpsrc_create),
(gst_udpsrc_get_property), (gst_udpsrc_start), (gst_udpsrc_unlock),
(gst_udpsrc_unlock_stop), (gst_udpsrc_stop):
* gst/udp/gstudpsrc.h:
Port to GstPoll. See #505417.
Original commit message from CVS:
* gst/law/mulaw-decode.c: (gst_mulawdec_chain):
Return GST_FLOW_NOT_NEGOTIATED when the caps are not set
yet on the srcpad. We need rate and channels before we
can do any processing. Fixes bug #519088.
Original commit message from CVS:
* configure.ac:
Detect and indicate if GCC inline assembly syntax is
available.
* gst/goom/Makefile.am:
* gst/goom/convolve_fx.c:
* gst/goom/flying_stars_fx.c:
* gst/goom/goom_config.h:
* gst/goom/goom_core.c:
* gst/goom/goomsl.c:
* gst/goom/ifs.c:
* gst/goom/mmx.c:
* gst/goom/plugin_info.c:
* gst/goom/xmmx.c:
Fix various GCC-isms, and only build the inline assembly
with compilers that support GCC inline assembly.
Fix a couple of other warnings shown with Forte.
Original commit message from CVS:
* gst/goom/xmmx.c:
Use 'emms' instead of 'femms' to not crash on cpus that do not
implement this 3dnow specific instruction.
Original commit message from CVS:
* gst/goom/plugin_info.c: (setOptimizedMethods):
Use extended MMX for draw_line() too if available, not only
normal MMX.
Original commit message from CVS:
* gst/goom2k1/Makefile.am:
* gst/goom2k1/gstgoom.c:
Rename the installed library, and don't register the same
GType name as the new goom.
Original commit message from CVS:
* gst/goom/gstgoom.c: (goom_debug), (plugin_init):
* gst/goom/plugin_info.c: (goom_debug), (GST_CAT_DEFAULT),
(setOptimizedMethods):
Call oil_init(), otherwise oil_get_cpu_flags() won't return
anything useful. Export goom debug category so we can get
rid of the VERBOSE define and the printfs.
Original commit message from CVS:
* gst/goom/Makefile.am: Don't compile lex or yacc outputs
with warnings, but add other CFLAGS
* gst/goom/goomsl.c (gsl_instr_set_namespace),
(gsl_instr_add_param), (iflow_execute), (gsl_enternamespace),
(calculate_labels), (gsl_read_file):
* gst/goom/goomsl_lex.l:
* gst/goom/goomsl_yacc.y:
* gst/goom/plugin_info.c: Remove a few live printf, and
fprintf, replace exit() calls with g_assert_not_reached()
if it not optimal for a library
Original commit message from CVS:
* gst/goom/Makefile.am: Remove the warnings being disabled,
fix linkage on x86, spotted by Sebastian Dröge
<slomo@circular-chaos.org>
* gst/goom/convolve_fx.c (convolve_init),
(create_output_with_brightness), (convolve_apply):
* gst/goom/filters.c (zoomFilterVisualFXWrapper_create):
* gst/goom/goomsl.c:
* gst/goom/ifs.c (ifs_update), (ifs_visualfx_create):
* gst/goom/plugin_info.c:
* gst/goom/tentacle3d.c (tentacle_fx_create):
Fix warnings, and disable the motifs in the convolve_fx
plugin (they were causing warnings, and they were just
"Goom" in funny letterring)
Original commit message from CVS:
2008-02-23 Bastien Nocera <hadess@hadess.net>
* configure.ac: Add checks for Flex/Yacc/Bison and other
furry animals, for the new goom 2k4 based plugin
* gst/goom/*: Update to use goom 2k4, uses liboil to detect
CPU optimisations (not working yet), move the old plugin to...
* gst/goom2k1/*: ... here, in case somebody is sick enough
Fixes#515073
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_setup_streams):
Post the server response code in an error message instead of a generic
'error' message. Fixes#517237.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_create_stream):
Init values to -1 instead of the default 0 value.
Fixes#516524.
Original commit message from CVS:
patch by: Wim Taymans <wim.taymans@collabora.co.uk>
fixes: #514889
* gst/rtp/gstrtph264pay.c:
* gst/rtp/gstrtpmp4gdepay.c:
* gst/rtp/gstrtpmp4gpay.c:
* gst/rtp/gstrtpmp4gpay.h:
* gst/rtp/gstrtptheorapay.c:
* gst/rtp/gstrtpvorbispay.c:
Fix various leaks shown up in valgrind
- free sprops and buffer in error cases in H264 payloader
- fix leak in mp4g depayloader when construction the caps
- don't leak config string in the mp4g payloader
- don't leak buffers and headers in theora and vorbis payloaders
* tests/check/elements/rtp-payloading.c:
Fix the RTP data test
- Actually send valid amr data to the payloader instead of 20
zero-bytes
- The mp4g payloader expects codec_data on the caps
Original commit message from CVS:
* gst/avi/gstavidemux.c:
Revert patch which sends timestamps only on keyframes, as it
breaks playback with current gst-ffmpeg.
Fixes: #515562
Original commit message from CVS:
* gst/multifile/gstmultifilesrc.c: (gst_multi_file_src_create):
* tests/check/elements/multifile.c: (GST_START_TEST):
Close some memory leaks spotted by the unit test. Fixes bug #515697.
Original commit message from CVS:
* docs/plugins/Makefile.am:
* gst/spectrum/gstspectrum.c:
* tests/examples/spectrum/.cvsignore:
* tests/examples/spectrum/Makefile.am:
* tests/examples/spectrum/spectrum-example.c:
Add a simple example application for the spectrum element, include it
in the docs, and fix some documentation ambiguities.
Fixes: #348085
Original commit message from CVS:
* gst/equalizer/Makefile.am:
* gst/spectrum/Makefile.am:
Fix includes order
* tests/check/Makefile.am:
Exclude v4l2src from the states test - it takes too long to start.
* tests/check/elements/spectrum.c:
Make the test run properly with CK_FORK=no
Original commit message from CVS:
2008-02-08 Julien Moutte <julien@fluendo.com>
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_blockgroup_or_simpleblock): Flag
keyframe and delta units correctly when dealign with a
BlockGroup.
Fixes: #514397
Original commit message from CVS:
* gst/multifile/gstmultifilesrc.c: (gst_multi_file_src_create):
Need to use gsize here for the size, fixes compiler warning.
* tests/examples/equalizer/.cvsignore:
* tests/examples/equalizer/Makefile.am:
* tests/examples/spectrum/.cvsignore:
* tests/examples/spectrum/Makefile.am:
Add missing files to fix the build.
Original commit message from CVS:
* gst/multifile/gstmultifilesink.c:
* gst/multifile/gstmultifilesrc.c:
Use g_file_[sg]et_contents() instead of using stdio functions.
Should be less error prone.
* tests/check/elements/multifile.c:
Create a temporary directory using standard functions instead of
creating a directory in the current dir.
Original commit message from CVS:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/inspect/plugin-audiofx.xml:
* gst/audiofx/Makefile.am:
* gst/audiofx/audiofx.c:
* gst/audiofx/audiowsincband.c:
* gst/audiofx/audiowsincband.h:
* gst/audiofx/audiowsinclimit.c:
* gst/audiofx/audiowsinclimit.h:
* tests/check/Makefile.am:
* tests/check/elements/audiowsincband.c:
* tests/check/elements/audiowsinclimit.c:
Move the lpwsinc and bpwsinc elements from gst-plugins-bad into
the audiofx plugin, and rename to audiowsinclimit and audiowsincband
respectively.
Fixes: #467666
Original commit message from CVS:
* gst/icydemux/gsticydemux.c: (gst_icydemux_chain):
* tests/check/elements/icydemux.c:
Return GST_FLOW_NOT_NEGOTIATED if we get a buffer without
caps, and add a somewhat useful debug message. Plus test.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c:
Include unistd.h only if HAVE_UNISTD_H is defined
* win32/common/config.h.in:
* win32/common/config.h:
Define socklen_t as it seems it's not defined in default
Visual Studio headers.
* win32/vs6/libgstalpha.dsp:
* win32/vs6/libgstapetag.dsp:
* win32/vs6/libgstavi.dsp:
* win32/vs6/libgstrtp.dsp:
* win32/vs6/libgstrtsp.dsp:
* win32/vs6/libgstvideomixer.dsp:
Update project file dependencies and add new source files
Original commit message from CVS:
Patch by: Bjarne Rosengren <bjarne at axis dot com>
* gst/matroska/ebml-write.c: (gst_ebml_write_element_push):
Don't leak buffers when we don't push them downstream.
Fixes bug #514965.
Original commit message from CVS:
* gst/multifile/gstmultifilesink.c:
Add a fixme comment.
* gst/selector/gstoutputselector.c:
Fix same leak as in input-selector.
* tests/icles/output-selector-test.c:
Improve the test.
Original commit message from CVS:
* gst/avi/gstavidemux.c: (gst_avi_demux_parse_subindex):
If there's no entries in the subindex, don't try to do anything stupid,
just return.
Original commit message from CVS:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* gst/avi/gstavisubtitle.c:
Add documentation for avisubtitle and change class to
Codec/Parser/Subtitle
Original commit message from CVS:
* gst/alpha/Makefile.am:
* gst/alpha/gstalpha.c:
Re-write the 'alpha' plugin to be BaseTransform based, simplifying
some stuff, and making buffer-alloc and resizing work automatically.
No longer crashes on odd frame widths and heights, although there
seems to be a disagreement with ffmpegcolorspace about what size
an AYUV frame with odd height should be.
Original commit message from CVS:
* gst/avi/gstavidemux.c: (gst_avi_demux_process_next_entry),
(gst_avi_demux_stream_data):
GStreamer timestamps are PTS values while AVI only knows about DTS
timestamps. Make sure we only copy the DTS as the buffer timestamp when
we are dealing with a key frame.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_parse_rtpinfo):
Use g_ascii_strtoll() instead of atoll, which is only
available in C99.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (gst_bpwsinc_class_init):
* gst/filter/gstlpwsinc.c: (gst_lpwsinc_class_init):
Don't implement get_unit_size() ourselves, the GstAudioFilter base
class already does this for us.
Original commit message from CVS:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
Add symbols from -unused.txt to the right place.
* gst/dvdspu/gstdvdspu.c:
* gst/dvdspu/gstdvdspu.h:
Coherent namespace usage.
* gst/spectrum/gstspectrum.c:
Fix broken XML fragment in doc snippet even more.
Original commit message from CVS:
Based on a patch by:
Victor STINNER <victor dot stinner at haypocalc dot com>
* gst/wavparse/gstwavparse.c: (gst_wavparse_stream_headers):
Set variable to NULL after freeing it to prevent double frees
or make failures by another use of it afterwards more obvious
and fix use of it after the freeing.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer.c: (gst_iir_equalizer_finalize):
Unparent all bands from the equalizer when finalizing to stop
leaking them.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_class_init),
(gst_multiudpsink_init), (gst_multiudpsink_set_property),
(gst_multiudpsink_get_property), (gst_multiudpsink_init_send),
(gst_multiudpsink_add_internal), (gst_multiudpsink_remove):
* gst/udp/gstmultiudpsink.h:
Add property to automatically join a multicast group or not. This can be
useful when sharing a socket between multiple elements.
Fixes#509531.
Original commit message from CVS:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* gst/multipart/Makefile.am:
* gst/multipart/multipartdemux.c:
* gst/multipart/multipartdemux.h:
* gst/multipart/multipartmux.c:
* gst/multipart/multipartmux.h:
Re-add multipartdemux to the docs. Last round of section cleanup.
Original commit message from CVS:
As found by: Tommi Myöhänen <ext-tommi.myohanen nokia com>
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_parse_rtpinfo):
Use atoll to parse the rtptime with enough precision. Fixes#509329.
Original commit message from CVS:
* gst/avi/gstavisubtitle.c: (gst_avi_subtitle_extract_file):
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_send):
Initialise variables to work around (false) 'foo might be used
uninitialized in this function' warnings by gcc-3.3.3 (#509298).
Original commit message from CVS:
* ext/flac/gstflacdec.c: (gst_flac_extract_picture_buffer):
* gst/id3demux/id3v2frames.c: (parse_picture_frame):
Generate the image-type values correctly. Leave them out of the caps
when outputting a "preview image" tag, since it only makes sense
to have one of those - the type is irrelevant.
* sys/sunaudio/gstsunaudiomixerctrl.c:
(gst_sunaudiomixer_ctrl_open):
If we can, mark the mixer multiple open when we use it, in case
(for some reason) the process wants to open it again elsewhere.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtp/gstrtptheoradepay.c: (gst_rtp_theora_depay_setcaps):
* gst/rtp/gstrtptheorapay.c:
Fix the clock rate to 90000 as required by the RFC.
Fixes#508644.
Original commit message from CVS:
Based on patch by: Tommi Myöhänen <ext-tommi.myohanen nokia com>
* gst/id3demux/id3v2frames.c: (parse_comment_frame):
Make sure the ISO 639-X language code in ID3v2 COMM frames
is actually valid UTF-8 (or rather: ASCII), so we don't end
up with non-UTF8 strings in tags if there's garbage in the
language field. Also make sure the language code is always
lower case. Fixes: #508291.
Original commit message from CVS:
reviewed by: Edward Hervey <edward.hervey@collabora.co.uk>
* gst/videomixer/videomixer.c:
(gst_videomixer_set_master_geometry), (_do_init),
(gst_videomixer_child_proxy_get_child_by_index),
(gst_videomixer_child_proxy_get_children_count),
(gst_videomixer_child_proxy_init), (gst_videomixer_reset),
(gst_videomixer_init), (gst_videomixer_request_new_pad),
(gst_videomixer_release_pad), (gst_videomixer_fill_queues):
Implement GstChildProxy interface.
Send newsegment at the right moment
Fixes#488879
Original commit message from CVS:
* gst/alpha/Makefile.am:
* gst/alpha/gstalpha.c: (gst_alpha_class_init), (gst_alpha_init),
(gst_alpha_sink_event), (gst_alpha_chain),
(gst_alpha_change_state), (plugin_init):
Make the various properties of 'alpha' controllable. This allows doing
niceties like fade-in/fade-out.
Original commit message from CVS:
* gst/matroska/matroska-mux.c: (COMMON_VIDEO_CAPS_NO_FRAMERATE),
(videosink_templ):
Also fix up pad templates to indicate that image/jpeg doesn't
absolutely require the framerate property to be set (#504081).
Original commit message from CVS:
Based on patch by: Wouter Cloetens <wouter at mind be>
* gst/matroska/matroska-mux.c: (gst_matroska_mux_video_pad_setcaps),
(gst_matroska_mux_request_new_pad), (gst_matroska_mux_release_pad),
(gst_matroska_mux_finish), (gst_matroska_mux_collected):
* gst/matroska/matroska-mux.h:
Keep track of first and last timestamps for each incoming stream,
so we can calculate the total duration for live sources and other
input where we can't query the duration from the start or where
there's no constant framerate from which we can deduce the
duration; also use calculated/observed duration if it is bigger
than the previously queried duration. Furthermore, use
gst_pad_query_peer_duration() and take into account that it may
return TRUE but still a duration of CLOCK_TIME_NONE, which easily
screws up comparisons when using unsigned integers. Fixes#504081.
Original commit message from CVS:
* configure.ac:
* gst/audiofx/audioamplify.c:
(gst_audio_amplify_clipping_method_get_type),
(gst_audio_amplify_init), (gst_audio_amplify_transform_ip):
* gst/audiofx/audiodynamic.c: (gst_audio_dynamic_init),
(gst_audio_dynamic_transform_ip):
* gst/audiofx/audioinvert.c: (gst_audio_invert_init),
(gst_audio_invert_transform_ip):
* gst/audiofx/audiopanorama.c: (gst_audio_panorama_init),
(gst_audio_panorama_transform):
* gst/level/gstlevel.c: (gst_level_init):
Make elements GST_BUFFER_FLAG_GAP aware and call
gst_base_transform_set_gap_aware for this.
Bump core requirement to CVS.
* gst/audiofx/audiochebyshevfreqband.c:
(gst_audio_chebyshev_freq_band_transform_ip):
* gst/audiofx/audiochebyshevfreqlimit.c:
(gst_audio_chebyshev_freq_limit_transform_ip):
Also sync GObject properties to the controller if operating
in passthrough mode.
Original commit message from CVS:
* gst/avi/gstavi.c:
increase rank because no known issues anymore ...
* gst/avi/gstavisubtitle.c:
send subtitle name to the srcpad
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_send), (gst_rtspsrc_open):
* gst/rtsp/gstrtspsrc.h:
Implement redirect for the DESCRIBE reply. Fixes#506025.
Original commit message from CVS:
* gst/avi/gstavidemux.c: (gst_avi_demux_loop):
* gst/wavparse/gstwavparse.c: (gst_wavparse_chain):
* sys/ximage/gstximagesrc.c: (composite_pixel):
Fix 'xyz may be used uninitialized' compiler warnings caused
by broken g_assert_not_reached() macro in GLib-2.15.x (it's
not really nice to abort in any case). Fixes#505745.
Original commit message from CVS:
* gst/avi/gstavisubtitle.c: (IS_BOM_UTF8), (IS_BOM_UTF16_BE),
(IS_BOM_UTF16_LE), (IS_BOM_UTF32_BE), (IS_BOM_UTF32_LE),
(gst_avi_subtitle_extract_file), (gst_avi_subtitle_parse_gab2_chunk):
Detect other UTF byte order markers and convert to UTF-8 as
appropriate.
Original commit message from CVS:
* gst/avi/gstavisubtitle.c: (src_template),
(gst_avi_subtitle_extract_utf8_file),
(gst_avi_subtitle_parse_gab2_chunk), (gst_avi_subtitle_chain),
(gst_avi_subtitle_base_init), (gst_avi_subtitle_class_init),
(gst_avi_subtitle_init), (gst_avi_subtitle_change_state):
* gst/avi/gstavisubtitle.h:
Refactor a bit; fix name extraction; don't assume all the data
in the chunk is actually subtitle data, there may be padding at
the end; fix GST_ELEMENT_ERROR usage; store extracted subtitle
file so it's there to send again after a seek (for future use).
Original commit message from CVS:
* gst/avi/Makefile.am:
* gst/avi/gstavi.c:
* gst/avi/gstavisubtitle.c:
* gst/avi/gstavisubtitle.h:
* tests/check/Makefile.am:
* tests/check/elements/avisubtitle.c:
* win32/common/config.h:
Add avi subtitle element for bug #442034. Need seeking support
and more support for character conversion.
Original commit message from CVS:
* gst/multifile/gstmultifilesrc.c:
* gst/multifile/gstmultifilesrc.h:
When subsequent files are read, if the file doesn't exist, send
an EOS instead of causing an error.
Original commit message from CVS:
* gst/id3demux/id3v2frames.c: (parse_url_link_frame):
Parse WOAF frames and put the result into GST_TAG_CONTACT,
which is where it would end up if the same information was
put in a vorbis comment (don't think it's worth adding a
new URI tag for this). Fixes#488112.
Original commit message from CVS:
Patch by: Wai-Ming Ho <webregbox at yahoo dot co dot uk>
* gst/rtp/gstrtph264pay.c: (gst_rtp_h264_pay_init),
(gst_rtp_h264_pay_finalize), (gst_rtp_h264_pay_setcaps),
(next_start_code), (is_nal_equal), (gst_rtp_h264_pay_decode_nal),
(encode_base64), (gst_rtp_h264_pay_parse_sps_pps),
(gst_rtp_h264_pay_handle_buffer):
* gst/rtp/gstrtph264pay.h:
Use higher performance start-code searching.
Parse NALs and store SPS, PPS and profile in the caps so that they can
be used in the SDP. Fixes#502814.
Original commit message from CVS:
Patch by: Wouter Cloetens <wouter at mind dot be>
* gst/multipart/multipartdemux.c: (gst_multipart_demux_chain):
Copy timestamp from input to output. Not very perfect yet but better
than nothing. Fixes#503023.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (bpwsinc_transform):
* gst/filter/gstlpwsinc.c: (lpwsinc_transform):
The transform() methods are not called in passthrough mode so
there's no need for checking if the element is in passthrough mode.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (bpwsinc_transform):
* gst/filter/gstlpwsinc.c: (lpwsinc_transform):
Sync the GObject properties with the controller even in passthrough
mode to get consistent property values.
Original commit message from CVS:
* gst/audiofx/audioamplify.c: (gst_audio_amplify_transform_ip):
* gst/audiofx/audiochebyshevfreqband.c:
(gst_audio_chebyshev_freq_band_transform_ip):
* gst/audiofx/audiochebyshevfreqlimit.c:
(gst_audio_chebyshev_freq_limit_transform_ip):
* gst/audiofx/audiodynamic.c: (gst_audio_dynamic_transform_ip):
* gst/audiofx/audioinvert.c: (gst_audio_invert_transform_ip):
The transform_ip() methods should do nothing if in passthrough mode.
It might get non-writable buffers in that case but the buffer might
as well be writable.
* gst/audiofx/audiopanorama.c: (gst_audio_panorama_transform):
The transform() methods won't be called in passthrough mode and
otherwise the buffer is always writable so don't check here.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_srcpad_event):
Fix seeking in .wav files again (#501775). Some people seem to think
they don't need to test their changes when they're just 'reflowing'
some code.
Original commit message from CVS:
* gst/autodetect/gstautovideosink.c:
(gst_auto_video_sink_class_init), (gst_auto_video_sink_dispose),
(gst_auto_video_sink_init),
(gst_auto_video_sink_create_element_with_pretty_name),
(gst_auto_video_sink_find_best),
(gst_auto_video_sink_set_property),
(gst_auto_video_sink_get_property):
* gst/autodetect/gstautovideosink.h:
Fix docs.
Use same error reporting code as autoaudiosink.
Add property to filter sinks based on caps. Only select raw video sinks
by default for backwards compat.
API: GstAutoVideoSink::filter-caps
Original commit message from CVS:
Patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* gst/autodetect/gstautoaudiosink.c:
(gst_auto_audio_sink_class_init), (gst_auto_audio_sink_dispose),
(gst_auto_audio_sink_init), (gst_auto_audio_sink_find_best),
(gst_auto_audio_sink_set_property),
(gst_auto_audio_sink_get_property):
* gst/autodetect/gstautoaudiosink.h:
Add property to filter sinks based on caps. Only select raw audio sinks
by default for backwards compat. Fixes#417420.
API: GstAutoAudioSink::filter-caps
Original commit message from CVS:
* gst/rtp/gstrtph263depay.c: (gst_rtp_h263_depay_class_init),
(gst_rtp_h263_depay_process):
Code beautification.
Added debug statements.
Don't bit-shift everything, just do operations on last/first byte
instead.
Original commit message from CVS:
Patch by: Jayarama S. Santana <sundarsantana at gmail dot com>
* gst/rtp/gstrtpmp4adepay.c: (gst_rtp_mp4a_depay_process):
Fix wrong comparison in overrun check. Fixes#499239 some more.
Original commit message from CVS:
* gst/rtp/gstrtph263depay.c: (gst_rtp_h263_depay_init),
(gst_rtp_h263_depay_process):
* gst/rtp/gstrtph263depay.h:
Fix h263 depayloader so that ANY h263 decoder can handle the outgoing
stream.
Original commit message from CVS:
Based on Path by: Jayarama S. Santana <sundarsantana at gmail dot com>
* gst/rtp/gstrtpmp4adepay.c: (gst_rtp_mp4a_depay_setcaps),
(gst_rtp_mp4a_depay_process):
* gst/rtp/gstrtpmp4adepay.h:
Fix depayloading when multiple frames are inside one RTP packet.
Fixes#499239.
Original commit message from CVS:
* gst/rtp/gstrtph263depay.c: (gst_rtp_h263_depay_process):
Read the I flag for Mode A h263 rtp stream and set the
GST_BUFFER_FLAG_DELTA_UNIT accordingly.
Fixes#499383
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (bpwsinc_set_property):
* gst/filter/gstlpwsinc.c: (lpwsinc_set_property):
Post a GST_MESSAGE_LATENCY if the latency changes.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer10bands.c:
* gst/equalizer/gstiirequalizer3bands.c:
Remove preset iface again. We'll re-add this after its been released
in -good.
Original commit message from CVS:
2007-11-20 Julien MOUTTE <julien@moutte.net>
* ext/taglib/gsttaglibmux.c: (gst_tag_lib_mux_render_tag),
(gst_tag_lib_mux_adjust_event_offsets):
* gst/qtdemux/qtdemux.c: (qtdemux_parse_theora_extension):
* sys/osxaudio/Makefile.am:
* sys/osxvideo/cocoawindow.h:
* sys/osxvideo/cocoawindow.m: Fix build on Mac OS X 10.5
