Refusing an incoming segment in < GST_MATROSKA_READ_STATE_DATA should only be
done if the incoming segment is not in GST_FORMAT_TIME.
In GST_FORMAT_TIME, we are just storing the values and returning, so we can
invert the order of the checks.
Fixes proper segment propagation in matroska/webm DASH use-cases
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3914>
Is a seek is done on stream-collection post, there are no selected streams
yet. Therefore none would be chosen to adjust the key-unit seek.
If no streams are selected, fallback to a default stream (i.e. one which has
track(s) with GST_STREAM_FLAG_SELECT).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3914>
When seeking is handled by the collection posting thread, there is a possibility
that some leftover data will be pushed by the stream thread.
Properly detect and reject those early segments (and buffers) by comparing it to
the main segment seqnum
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3914>
... otherwise streams with constant size samples defined with a single
`sample_size` for all samples in the `stsz` box fall in the category
`chunks_are_samples` in `qtdemux_stbl_init`, overriding the actual
sample count.
`FOURCC_soun` would set this automatically for `compression_id == 0xfffe`,
however `compression_id` is read from the Audio Sample Entry box at an offset
marked as "pre-defined" in some version of the spec and set to 0 both by
GStreamer and FFmpeg for opus streams.
Considering the stream `sampled` flag is set explicitely by other fourcc
variants, doing so for opus seems consistent.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4903>
The "Encapsulation of Opus in ISO Base Media File Format" [1] specifications,
§ 4.3.2 Opus Specific Box, indicates that data must be stored as big-endian.
In `build_opus_extension`, `gst_byte_writer_put*_le ()` variants were used,
causing audio streams conversion to Opus in mp4 to offset samples due to the
PreSkip field incorrect value (29ms early in our test cases).
[1] https://opus-codec.org/docs/opus_in_isobmff.html#4.3.2
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4875>
- Adding bayer 10,12,14,16 bits components with 16 bits storage. These
changes only adds capabilities. Capability format string is a complete
description of the frame and pixels layout. Only mapping LE bayer
formats as v4l2 only define LE bayer formats.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4852>
When doing a segment seek, the base offset in the new segment
would be increased by segment.position which is basically the
timestamp of the last packet. This does not include the duration
of the last packet though, so might be slightly shorter than the
actual duration of the clip or the requested segment.
Increase the base offset by the segment duration instead when
accumulating segments, which is more correct as it doesn't cut
off the last frame and makes the effective loop segment duration
consistent with the actual duration returned from a duration
query.
In case a segment stop was specified it's also possible that
some data was sent beyond the stop that's necessary for decoding
so the base offset increment should be based on that then and
not on the timestamp of the last buffer pushed out.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4604>
The muxer used a fixed value of 2 channels because the TR 102 366 spec
says they're to be ignored. However, the demuxer still trusted them,
resulting in bad caps.
Make the muxer fill in the correct channel count anyway (FFmpeg already
does) and make the demuxer ignore the value.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4739>
Due to the alpha value being inserted with _BEFORE, we were ending up
with ARGB instead of RGBA, thus displaying completely wrong colours.
According to libpng's manual, "to add an opaque alpha channel, use filler=0xff
or 0xffff and PNG_FILLER_AFTER which will generate RGBA pixels".
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4756>
Allow a project to use gstreamer-full as a static library
and link to create a binary without dependencies.
Introduce the option 'gst-full-target-type' to
select the build type, dynamic(default) or static.
In gstreamer-full/static build configuration gstreamer (gst.c)
needs the symbol gst_init_static_plugins which is defined
in gstreamer-full.
All the tests and examples are linking with gstreamer but the
symbol gst_init_static_plugins is only defined in the gstreamer-full
library. gstreamer-full can not be built first as it needs to know what plugins
will be built.
One option would be to build all the examples and tests after
gstreamer-full as the tools.
Disable tools build in subprojects too as it will be built at the end of
build process.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4128>
Since c0bf793c05 ("flvmux: Set PTS based on
running time") the timestamp of the output buffer is already in running
time. So using that for 'srcpad->segment.position' does not work correctly
because gst_aggregator_simple_get_next_time() will convert it again with
gst_segment_to_running_time().
This means that the timestamp returned by
gst_aggregator_simple_get_next_time() may be incorrect. For example, if
flvmux is added to a already runinng pipeline then the timestamp is too
small and gst_aggregator_wait_and_check() returns immediately. As a result,
buffers may be muxed in the wrong order.
To fix this, use the PTS of the incoming buffer instead of the outgoing
buffer. Also add the duration as get_next_time() is supposed to return the
timestamp of the next buffer, not the current one.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4701>
There are broken(?) mjpeg videos that are incorrectly detected as
interlaced. This happens because 'info.height > height' (e.g. 1088 > 1080).
In the interlaced case info.height is approximately 'height * 2' but not
exactly because height is a multiple of DCTSIZE. Make the check more
restrictive but take the rounding effect into account.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4696>
For interlaced jpeg, gst_jpeg_dec_decode_direct() is called twice, once for each
field. In this case, stride[n] is plane_stride[n] * 2 to ensure that only every
other line is written. So the loop must stop at height / num_fields.
If the frame is really interlaced then continuing beyound this, is not harmful,
because jpeg_read_raw_data() will do nothing and return 0, so am info message is
printed.
However, if the frame is not actually interlaced, just misdetected as interlaced
then there is still data available from the second half of the frame. Now
line[0][j] is set to the scratch buffer. If the scratch buffer is not allocated
(because the height is a multiple of v_samp[0] * DCTSIZE) then the result is a
segfault due to a null-pointer dereference.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4696>
Drivers may signal end of sequence using an empty buffer and LAST buffer
set, or just an empty buffer on certain legacy implementation. When this
occured, we'd send GST_V4L2_FLOW_LAST_BUFFER were the code expected
GST_FLOW_EOS. Stop abusing GST_FLOW_EOS and port all the code to the new
GST_V4L2_FLOW_LAST_BUFFER.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4669>
In cases that encoder needs to reset format, there is race while draining.
v4l2videoenc finish() sends CMD_STOP command to driver, and desire to return
GST_FLOW_OK. But at this time, encoder CAPTURE may have dequeued the last
buffer and got eos. finish() return value changes to be GST_FLOW_EOS which
causes set format fail. So there is no need to check return value for finish()
when set format.
Also need to flush encoder after draining to make sure flush is finished.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4495>
The index is already incremented by 3 every iteration so multiplying it
by 3 additionally on each array access is doing it twice and does not
work.
This caused invalid files to be created if there's more than one CEA608
triplet in a buffer, and out of bounds memory reads.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4634>
