Only send newsegment events with new positions downstream when actually
needed, instead of sending multiple newsegment events with new seek
positions in a row. Also set the discont flag on buffers after a
discontinuity.
Re-use the existing 'pos' field maintained by ebml writer to set
buffer offsets. This also makes sure that we set the right offsets
on buffers after a seek (e.g. when writing an index at the end).
That is, if parse error occurs in state requiring to move to next cluster,
and doing so to the expected next position of cluster fails, then scan for a
next cluster from present position and resume from there.
Fixes#620790.
If some bits out of place in block(group) parsing, forego and move to next.
Also skip large blocks in pull mode, but need to give up in push mode.
Fixes#626463.
Improves #620790.
That is, in files that have no index (Cue), perform seek by scanning for
nearest cluster with timecode before requested position. Scanning is done
as a combination of interpolation and sequential scan.
Fixes#617368.
So matroska's Block structure has no keyframe flag, only the SimpleBlock has it.
To detect keyframes in Blocks, it is just the BlockGroup container that needs
to have a ReferenceBlock attached if it is a delta frame in video.
Start cluster at every keyframe or when we would overflow the previous
cluster's relative timestamp field. This would avoid as much as possible
starting clusters at non-keyframes.
This allows us to skip delta units earlier and is a bit clearer in my
opinion. It also makes only video buffers ever be delta units, not
just for SimpleBlock as before.
When the keyframe bit of SimpleBlock Flags wasn't set, the buffer was being
marked with GST_BUFFER_FLAG_DELTA_UNIT, causing all buffers to be skipped
after a seek. This may be a problem with the Sorenson Squish encoder, but
arguably the keyframe bit should only be applied to video.
Fixes bug #620358.
In demuxer and muxer use the gst_util_uint64 scaling functions rather than
standard integer division. Add warnings (to be changed to debug) for debugging
the timestamp and duration.
Specifically, this reduces pushing several small buffers for each
data buffer and also avoids a seek for each buffer altogether
(though a seek is still needed for each cluster).
Fixes#619273.
Before, vp8dec had no option but to decode all frames even if some/all
of them would be late. With this change, performance when keyframes are
frequent is helped a great deal. On my Thinkpad X60s, decoding a 20 s
1080p sunflower encode with keyframes every 10 frames went from taking
42 s with 5 frames shown to 21 s with 15 frames shown (still slow
enough to count by hand). When keyframes are more sparse, you will
still be able to catch up eventually, but the results won't be as
noticable.
Add webm typefinder just for the release, so webm works for
people whose distros don't patch gst-plugins-base as well.
We'll remove this again after the release.
In this day and age this should be safe. There's otherwise a risk people
will be creating unneccessarily big WebM files as they can't use
SimpleBlock in v1.
The original plan was to let WebM v1 be the same as Matroska v2 (with
extra constraints), but for simplicity it was decided to handle the
versions equally, such that e.g. SimpleBlock is only allowed in WebM v2.
Failure to do this for corrupt input can cause a subbuffer bigger
than the actual buffer to be created, quickly leading to segfault.
Test case:
bug_s222005751_r0.001____memcpy.webm
The comment says this cannot happen, but it did and I don't know
why. This is not the correct fix, needs investigation. Test case:
bug_s555010094_r0.0005:0.008____IA__g_assertion_message_expr.webm
This was triggering an UTF-8 assertion in gst_caps_set_simple for
corrupt files with garbage as codec id. Test case:
gstreamer_error_trying_to_set_invalid_utf8_as_codec_id.webm
Old gst_ebml_read_ascii renamed to gst_ebml_read_string, also used by
gst_ebml_read_utf8. Unlike for UTF-8, failure to validate is an error,
as gst_ebml_read_ascii is used for reading doctype and codec id and we
might just as well give up early in those cases.
Because GstMatroskaTrackContext *stream is set up in the first
SimpleBlock or Block, a rogue CodecState otherwise causes a segfault on
derefencing the NULL pointer. Test case:
bug_s5506167_r0.001____gst_matroska_demux_parse_blockgroup_or_simpleblock.webm
Remove BITMAPINFOHEADER and use the one from riff-lib. Also remove the
WAVEFORMATEX_SIZE define and use a sizeof together with the respective struct.
Besides better code reuse this lessens the ununsed symbols in the docs.
Changing it to the newest timestamp that was ever pushed will
increase the segment start in 500ms jumps, which could be just
after the next sparse stream buffer. E.g.
Video at 1.0s, sparse stream at 0.5s would jump the
sparse stream to 1.0s. Now a new sparse stream buffer could
appear that has a timestamp of 0.9s and this would be
dropped for no good reason because of bad luck.
As a side effect, avoid sending newsegment updates with start times
that go back and forth, which leads to bogus downstream running_time.
Also fixes seeking in bug #606744.
.. by initializing streams starting at 0, as that is basically
where we 'seek to' at the start and assume streams to start elsewhere.
Also enables newsegment update events for subtitle streams.
Added the 'min-index-interval' property to matroskamux,
which determines how much time (nanoseconds) is left
between keyframes stored in the index.
Fixes#583985.
Matroska uses three-letter ISO 639-2B codes, but GST_TAG_LANGUAGE is
supposed to contain two-letter ISO 639-1 codes, so use new language
code mapping functions in -base to convert between those two as
needed.
Fixes#505823.
Send pending tags only from the streaming thread, just after we've sent
the newsegment event, not with e.g. flush-start. This not only does the
right thing, but also makes sure we're not trampling over variables set
up in the streaming thread from the seeking thread in case someone tries
to issue a seek just as the demuxer is parsing the headers.
Fixes#601617. Spotted by Ognyan Tonchev.
At the end, Dirac streams have an EOS packet with 0 length.
Don't ever sit in an infinite loop when processing one. Allows
muxing Dirac into mkv to complete successfully.
Don't leak buffers when resyncing to a keyframe.
Avoid leaking buffers when exiting the loop on error conditions.
Add some more debug info.
Fixes#585911
First of all a keyframe seek should be done to the
keyframe right before the requested position and not
to the keyframe that is nearest to the requested position.
Use per track index arrays and use our new binary search function
from core to speed up the search.
Not all Matroska files have a Tags element which contains
information about the title among other things. Most video
Matroska files only contain the Title element so we
should parse this too. Fixes bug #570435.
Link to properties. Correct titles for examples. Document a few trivial cases. Keep lists in section file and docs/plugins/Makefile.am alphabetically ordered. Fix warnings that gtk-doc points out.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_video_caps):
* gst/matroska/matroska-mux.c: (gst_matroska_mux_video_pad_setcaps):
Some cleanups, refactoring and minor enhancements in caps handling.
* gst/matroska/matroska-mux.c: (gst_matroska_mux_class_init),
(gst_matroska_mux_init), (gst_matroska_pad_reset),
(gst_matroska_pad_free), (gst_matroska_mux_reset),
(gst_matroska_mux_video_pad_setcaps),
(gst_matroska_mux_request_new_pad):
* tests/check/elements/matroskamux.c: (teardown_src_pad):
Only remove, release or reset what is appropriate upon state change.
Original commit message from CVS:
* gst/matroska/matroska-mux.c: (gst_matroska_mux_reset),
(gst_matroska_mux_handle_sink_event), (gst_matroska_mux_finish):
* gst/matroska/matroska-mux.h:
Remove internal taglist and fully use tagsetter interface.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_audio_caps):
* gst/matroska/matroska-ids.h:
Make mkvdemux aware of E-AC3.
Original commit message from CVS:
* gst/matroska/matroska-mux.c:
(gst_matroska_mux_handle_dirac_packet):
Fix muxing of Dirac streams if the input already has the format
we need, i.e. is the output of matroskademux.
Original commit message from CVS:
* gst/matroska/matroska-ids.h:
* gst/matroska/matroska-mux.c: (gst_matroska_pad_free),
(gst_matroska_mux_handle_dirac_packet),
(gst_matroska_mux_write_data):
Implement Dirac muxing into Matroska comforming to the spec, i.e.
put all Dirac packages up to a picture into a Matroska block.
TODO: Implement writing of the ReferenceBlock Matroska elements,
currently the Dirac muxing is only 100% correct if Matroska version 2
is selected for muxing.
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis com>
* gst/matroska/matroska-mux.c: (gst_matroska_mux_reset),
(gst_matroska_mux_request_new_pad), (gst_matroska_mux_release_pad):
Fix a memory leak when pads are requested but the pipeline never
goes into PLAYING.
Correctly remove request pads, no matter if they have collected
data or not.
Fixes bug #557710.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_send_event),
(gst_matroska_demux_video_caps), (gst_matroska_demux_audio_caps):
* gst/matroska/matroska-mux.c:
(gst_matroska_mux_video_pad_setcaps),
(gst_matroska_mux_audio_pad_setcaps), (gst_matroska_mux_finish):
Add Real[Audio|Video] support to Matroska containers.
It works fine for:
* decoding real audio/video streams contained in mkv
* 'transmuxing' real (.rm) files into .mkv files
It will not work though for encoding real[audio/video] streams that
don't contain the 'mdpr_data' extra data on the caps.
The reason why this will not work is because I never intended to
duplicate virtually all the 'mdpr' block creation into mkvmux.
Fixes#536067
Original commit message from CVS:
* gst/matroska/ebml-read.c: (gst_ebml_read_element_id),
(gst_ebml_read_element_length), (gst_ebml_read_uint),
(gst_ebml_read_sint), (gst_ebml_read_float),
(gst_ebml_read_header):
Change some GST_ELEMENT_ERRORs to GST_ERROR_OBJECT to make it
possible to ignore errors and not post any ERROR messages on
the bus.
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_contents):
Ignore any errors and not just EOS when parsing the contents of
a SeekHead. Errors here are usually caused by truncated files
and playback of the file works fine. Fixes playback of the
audio_only_chapter_seekbroken.mka file from the MPlayer samples
archive.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_blockgroup_or_simpleblock):
If the duration of a block is unknown only use the timestamp for the
first lace and use GST_CLOCK_TIME_NONE as duration for the following
laces. Otherwise every lace has the same timestamp which leads to
various problems. Really fixes bug #548831.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_add_stream):
Don't calculate the default duration of a frame from the audio sampling
rate. This only works for raw audio if every frame contains a single
sample and results in broken buffer durations for other formats
if no specified default duration is given or the blocks have no
duration. Fixes bug #548831.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_blockgroup_or_simpleblock):
Allow zero sized blocks instead of returning GST_FLOW_OK. Such blocks
are used for text/plain subtitles as a gap-filler in some files.
Original commit message from CVS:
* gst/matroska/matroska-mux.c:
(gst_matroska_mux_handle_sink_event),
(flac_streamheader_to_codecdata):
We need to drop one additional buffer for FLAC as the fLaC
marker and STREAMINFO block are merged into one buffer in the caps.
Also don't pretend to support NEWSEGMENT events, otherwise we
will most probably write some invalid data.
Original commit message from CVS:
* gst/matroska/matroska-mux.c: (flac_streamheader_to_codecdata),
(gst_matroska_mux_audio_pad_setcaps):
Add support for muxing FLAC into Matroska containers.
Fixes bug #311586.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_reset),
(gst_matroska_demux_element_send_event),
(gst_matroska_demux_handle_seek_event), (gst_matroska_demux_loop):
* gst/matroska/matroska-demux.h:
Close the current segment if we're doing a non-flushing seek and send
the close-segment and the new segment of the seek from the streaming
thread.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroskademux_do_index_seek),
(gst_matroska_demux_element_send_event),
(gst_matroska_demux_handle_seek_event),
(gst_matroska_demux_handle_src_event):
When receiving a SEEK event on a specific pad first search for a seek
table entry for the stream of the pad and then fall back to an entry
for a different stream.
Original commit message from CVS:
* configure.ac:
* gst/matroska/matroska-ids.c: (gst_matroska_register_tags):
* gst/matroska/matroska-ids.h:
Build depend on core CVS for the attachment tag.
Original commit message from CVS:
* configure.ac:
* gst/matroska/Makefile.am:
* gst/matroska/lzo.c: (get_byte), (get_len), (copy),
(copy_backptr), (lzo1x_decode), (main):
* gst/matroska/lzo.h:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_read_track_encoding),
(gst_matroska_decompress_data), (gst_matroska_decode_data),
(gst_matroska_decode_buffer),
(gst_matroska_decode_content_encodings),
(gst_matroska_demux_read_track_encodings),
(gst_matroska_demux_add_stream),
(gst_matroska_demux_parse_blockgroup_or_simpleblock):
* gst/matroska/matroska-ids.h:
Decode the codec private data and following ContentEncoding if
necessary.
Support bzip2, lzo and header stripped compression. For lzo use the
ffmpeg lzo implementation as liblzo is GPL licensed.
Fix zlib decompression.
Original commit message from CVS:
* gst/matroska/matroska-mux.c:
(gst_matroska_mux_audio_pad_setcaps):
Fix muxing of MP3/MP2 with different MPEG versions by calculating the
duration of a frame with the new mpegaudioversion caps field.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_finalize),
(gst_matroska_demux_class_init), (gst_matroska_demux_init),
(gst_matroska_demux_combine_flows), (gst_matroska_demux_reset),
(gst_matroska_demux_stream_from_num),
(gst_matroska_demux_tracknumber_unique),
(gst_matroska_demux_add_stream), (gst_matroska_demux_send_event),
(gst_matroska_demux_handle_seek_event),
(gst_matroska_demux_sync_streams),
(gst_matroska_demux_parse_blockgroup_or_simpleblock),
(gst_matroska_demux_loop):
* gst/matroska/matroska-demux.h:
Allow an infinite number of stream inside Matroska containers and use
a GPtrArray for storing them instead of allowing "only" 127 streams.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_loop_stream_parse_id):
If no Tracks are found error out instead of trying it again until the
end of time.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_audio_caps):
Fix demuxing of raw integer audio. The samples are unsigned only for 8
bit and signed otherwise, not the other way around.
Original commit message from CVS:
* gst/matroska/matroska-mux.c:
(gst_matroska_mux_audio_pad_setcaps):
Add support for muxing raw float audio now that the spec defines the
endianness and add support for muxing raw integer audio with 24 and
32 bits.
Allow muxing of more than 8 audio channels.
Original commit message from CVS:
* gst/matroska/matroska-mux.c: (gst_matroska_mux_create_uid),
(gst_matroska_mux_reset), (gst_matroska_mux_start):
Add locking to the global array of used track UIDs to prevent random
crashes if more than a single matrosmux instance is used.
Use 64 bit values for the track UIDs.
Use the global GRandom of GLib instead of creating our own one
for the few random numbers we need every single time.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_class_init),
(gst_matroska_demux_add_stream), (gst_matroska_demux_query),
(gst_matroska_demux_element_query),
(gst_matroska_demux_handle_src_query),
(gst_matroska_demux_handle_seek_event):
Handle position and duration query in DEFAULT format if the
pad's track has a default frame duration set.
Fix seeking now that the segment's duration doesn't contain the
(possibly wrong or inaccurate) duration of the Matroska file.
Original commit message from CVS:
* gst/matroska/ebml-read.c: (_ext2dbl):
Use NAN constant instead of 0.0/0.0 if possible. NAN is defined
in math.h except on MSVC where it is defined in xmath.h.
Fixes compilation with MSVC.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_reset),
(gst_matroska_demux_handle_src_query),
(gst_matroska_demux_parse_info),
(gst_matroska_demux_loop_stream_parse_id):
* gst/matroska/matroska-demux.h:
Don't set the segment duration to the duration from the Matroska
header as this value could be wrong and is just informational.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_loop_stream_parse_id):
If no Tracks element is found until the first Cluster is found
search it and error out if none is found in the complete file.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_sync_streams):
Resync non-subtitle tracks too if a too large gap compared to other
tracks is detected.
Original commit message from CVS:
2008-06-23 Julien Moutte <julien@fluendo.com>
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_read_track_encoding),
(gst_matroska_demux_parse_blockgroup_or_simpleblock): Fix buggy
format strings in macros. (makes it build on OS X again...)
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_add_wvpk_header),
(gst_matroska_demux_audio_caps):
* gst/matroska/matroska-ids.h:
Fix demuxing of WavPack files. Muxing is still broken.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_track_free),
(gst_matroska_demux_add_mpeg_seq_header),
(gst_matroska_demux_add_wvpk_header),
(gst_matroska_demux_check_subtitle_buffer),
(gst_matroska_demux_parse_blockgroup_or_simpleblock),
(gst_matroska_demux_video_caps), (gst_matroska_demux_audio_caps),
(gst_matroska_demux_subtitle_caps):
* gst/matroska/matroska-ids.h:
Add a "vfunc" to the track context for postprocessing frames and
convert the wavpack and subtitle postprocessing to this vfunc.
Copy buffer flags in those functions to the new buffers too.
Parse CodecState elements of Blocks.
Add a postprocessing function for MPEG video that adds the sequence
header from the codec private data or codec state to the frames if
it's not already there.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_blockgroup_or_simpleblock):
If a gap of more than 1/2 second is found in one stream send a
NEWSEGMENT event to not stall the pipeline if the gap is too large.
This also fixes Matroska files where the first buffer doesn't start
at timestamp 0. Fixes bug #429322.
The duration of a block is the default duration multiplied with the
number of laces. Every lace is one frame and the default duration
is the duration of one frame. This fixes playback of files that use
lacing for some tracks.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_contents_seekentry):
Update FIXME/TODOs and only ignore EOS at the central, important place
instead of several places.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_reset),
(gst_matroska_demux_stream_from_num),
(gst_matroska_demux_encoding_cmp),
(gst_matroska_demux_encoding_order_unique),
(gst_matroska_demux_read_track_encoding),
(gst_matroska_demux_read_track_encodings),
(gst_matroska_demux_tracknumber_unique),
(gst_matroska_demux_add_stream), (gst_matroska_demux_init_stream),
(gst_matroska_demux_parse_tracks),
(gst_matroska_demux_parse_index_cuetrack),
(gst_matroska_demux_parse_index_pointentry),
(gst_matroska_demux_parse_index), (gst_matroska_demux_parse_info),
(gst_matroska_demux_parse_metadata_id_simple_tag),
(gst_matroska_demux_parse_metadata_id_tag),
(gst_matroska_demux_parse_metadata),
(gst_matroska_demux_parse_attached_file),
(gst_matroska_demux_parse_attachments),
(gst_matroska_demux_parse_chapters),
(gst_matroska_demux_sync_streams), (gst_matroska_decode_buffer),
(gst_matroska_demux_parse_blockgroup_or_simpleblock),
(gst_matroska_demux_parse_cluster),
(gst_matroska_demux_parse_contents_seekentry),
(gst_matroska_demux_parse_contents),
(gst_matroska_demux_loop_stream_parse_id),
(gst_matroska_demux_loop):
Improve debug output everywhere and fix the EOS logic.
Check the values of the ContentEncoding elements more strictly and
don't use tracks for which it's invalid.
Check that the track number is unique for this stream.
Check that seek positions are below G_MAXINT64 as our seeks are
int64-based and overflows will fail badly.
After seeks also don't push SimpleBlocks until the first one
containing a keyframe is found. Before this was done only for normal
Blocks.
Update some FIXME/TODOs.
* gst/matroska/ebml-read.c: (gst_ebml_read_peek_bytes),
(gst_ebml_read_utf8), (gst_ebml_read_header):
Improve debug output.
* gst/matroska/matroska-ids.c:
(gst_matroska_track_init_video_context):
* gst/matroska/matroska-ids.h:
* gst/matroska/matroska-mux.c:
(gst_matroska_mux_video_pad_setcaps):
Remove eye mode and don't parse it anymore. We can't use that
information in GStreamer yet so it's useless.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_index_compare):
When comparing index elements with the same time compare their
block number.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_attached_file)
Init variable to NULL to avoid compiler warning.
Original commit message from CVS:
* gst/matroska/Makefile.am:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_reset),
(gst_matroska_demux_parse_attached_file),
(gst_matroska_demux_parse_attachments),
(gst_matroska_demux_parse_contents_seekentry),
(gst_matroska_demux_loop_stream_parse_id):
* gst/matroska/matroska-demux.h:
* gst/matroska/matroska-ids.c: (gst_matroska_register_tags):
* gst/matroska/matroska-ids.h:
* gst/matroska/matroska.c: (plugin_init):
Parse Attachments and post them as GST_TAG_IMAGE if we detect
it as image and otherwise as GST_TAG_ATTACHMENT. Include filename
and description of the attachments in the caps. Fixes bug #537622.
Original commit message from CVS:
* gst/matroska/ebml-read.c: (gst_ebml_read_peek_bytes):
Return GST_FLOW_UNEXPECTED instead of GST_FLOW_ERROR on short reads.
If we get less bytes than requested we can't do anything except doing
our EOS logic.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_reset),
(gst_matroskademux_do_index_seek),
(gst_matroska_demux_parse_index_cuetrack),
(gst_matroska_demux_parse_index_pointentry),
(gst_matroska_index_compare), (gst_matroska_demux_parse_index),
(gst_matroska_demux_parse_metadata):
* gst/matroska/matroska-demux.h:
* gst/matroska/matroska-ids.h:
Use a GArray for storing the Cue (i.e. seek) information, store
the CueTrackPositions for every track, store the block number
and optimize searching in the array by sorting it after the last
element was added.
Fix a small memory leak when trying to parse a tags element that was
already parsed.
Original commit message from CVS:
* gst/matroska/matroska-mux.c: (gst_matroska_mux_reset),
(gst_matroska_mux_start), (gst_matroska_mux_finish),
(gst_matroska_mux_write_data):
* gst/matroska/matroska-mux.h:
Don't write another SeekHead which indexes all Clusters to the end of
the file. This isn't useful for anything and just increases filesize.
Original commit message from CVS:
* gst/matroska/ebml-read.c:
* gst/matroska/ebml-read.h:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_reset),
(gst_matroska_demux_parse_metadata):
* gst/matroska/matroska-demux.h:
Make sure that every Tags element is only parsed once and it's
containing tags are only posted once.
Original commit message from CVS:
* gst/matroska/ebml-read.c: (gst_ebml_peek_id),
(gst_ebml_read_header):
* gst/matroska/matroska-demux.c: (gst_matroska_demux_add_stream),
(gst_matroska_demux_parse_tracks),
(gst_matroska_demux_parse_index_cuetrack),
(gst_matroska_demux_parse_index_pointentry),
(gst_matroska_demux_parse_index), (gst_matroska_demux_parse_info),
(gst_matroska_demux_parse_metadata_id_simple_tag),
(gst_matroska_demux_parse_metadata_id_tag),
(gst_matroska_demux_parse_metadata),
(gst_matroska_demux_parse_attachments),
(gst_matroska_demux_parse_chapters),
(gst_matroska_demux_parse_blockgroup_or_simpleblock),
(gst_matroska_demux_parse_cluster),
(gst_matroska_demux_parse_contents_seekentry),
(gst_matroska_demux_parse_contents),
(gst_matroska_demux_loop_stream_parse_id):
Handle EBML elements like Void or CRC32 in the EbmlRead base class
already. They're not useful in the matroska parser and only cause
additional code.
Original commit message from CVS:
* gst/matroska/ebml-read.c: (gst_ebml_level_free),
(gst_ebml_finalize), (gst_ebml_read_change_state),
(gst_ebml_read_element_level_up), (gst_ebml_read_master):
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_contents_seekentry):
Reverse the level list as we usually are only interested in the
first element or want to add a new first element. Having the
first element stored at the end and calling g_list_last() and
g_list_append() is more expensive.
Also use GSlice for allocating the GstEbmlLevel structs.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_metadata_id_simple_tag):
* gst/matroska/matroska-mux.c: (gst_matroska_mux_write_simple_tag),
(gst_matroska_mux_write_data):
Use gst_value_serialize() and gst_value_deserialize() for transforming
tags from some GType to a string and the other way around. The default
transformations in GLib don't include transformations from string to
number types.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_reset),
(gst_matroska_demux_parse_tracks),
(gst_matroska_demux_parse_index), (gst_matroska_demux_parse_info),
(gst_matroska_demux_parse_attachments),
(gst_matroska_demux_parse_chapters),
(gst_matroska_demux_parse_contents_seekentry),
(gst_matroska_demux_loop_stream_parse_id):
* gst/matroska/matroska-demux.h:
Only parse Tracks, SeekHead and SegmentInfo elements once but allow
Tags multiple times. The first ones can appear more than once but must
contain the same content as the first for backup purposes so we ignore
all but the first one. Tags can appear multiple times with different
content.
Jump to all elements except Clusters that are available from a
SeekHead to make it more likely to have all required informations
before getting to the first Clusters.
Add dummy functions for parsing Attachments and Chapters.
Original commit message from CVS:
* gst/matroska/matroska-mux.c: (gst_matroska_mux_request_new_pad),
(gst_matroska_mux_release_pad), (gst_matroska_mux_write_data):
Update the counter for the number of streams when pads are added or
removed. This will make sure that a seek table is generated for
files with just one audio stream.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_metadata_id_simple_tag):
* gst/matroska/matroska-ids.h:
* gst/matroska/matroska-mux.c: (gst_matroska_mux_write_simple_tag):
Add some more tags, improve debugging a bit and make sure that
GValue transformation has succeeded before using the result
as a tag.
Original commit message from CVS:
* gst/matroska/ebml-write.c: (gst_ebml_write_float):
Use GDOUBLE_TO_BE() instead of (probably slower) custom code.
* gst/matroska/matroska-demux.c: (gst_matroska_demux_base_init),
(gst_matroska_demux_class_init), (gst_matroska_demux_init),
(gst_matroska_track_free), (gst_matroska_demux_encoding_cmp),
(gst_matroska_demux_read_track_encodings),
(gst_matroska_demux_add_stream),
(gst_matroska_demux_handle_src_query),
(gst_matroska_demux_init_stream),
(gst_matroska_demux_parse_index_cuetrack),
(gst_matroska_demux_parse_index_pointentry),
(gst_matroska_demux_parse_info),
(gst_matroska_demux_parse_metadata_id_simple_tag),
(gst_matroska_demux_parse_metadata),
(gst_matroska_demux_add_wvpk_header), (gst_matroska_decode_buffer),
(gst_matroska_demux_parse_blockgroup_or_simpleblock),
(gst_matroska_demux_parse_cluster),
(gst_matroska_demux_parse_contents_seekentry),
(gst_matroska_demux_loop_stream_parse_id),
(gst_matroska_demux_loop), (gst_matroska_demux_video_caps),
(gst_matroska_demux_audio_caps),
(gst_matroska_demux_subtitle_caps):
* gst/matroska/matroska-demux.h:
* gst/matroska/matroska-ids.c:
(gst_matroska_track_init_subtitle_context):
* gst/matroska/matroska-ids.h:
* gst/matroska/matroska-mux.c: (gst_matroska_mux_base_init),
(gst_matroska_mux_class_init), (gst_matroska_mux_init),
(gst_matroska_mux_create_uid), (gst_matroska_mux_reset),
(gst_matroska_mux_video_pad_setcaps),
(gst_matroska_mux_audio_pad_setcaps),
(gst_matroska_mux_subtitle_pad_setcaps),
(gst_matroska_mux_request_new_pad),
(gst_matroska_mux_track_header), (gst_matroska_mux_start),
(gst_matroska_mux_write_simple_tag), (gst_matroska_mux_finish),
(gst_matroska_mux_write_data), (gst_matroska_mux_collected),
(gst_matroska_mux_set_property):
Add many FIXMEs/TODOs all over the matroska muxer and demuxer
elements, do some checks for valid values in the demuxer, handle
tracktimecodescale in the demuxer, set correct default values for all
settings in the demuxer, review and add all missing matroska
IDs and some more raw YUV formats, and some trivial cleanup.
Original commit message from CVS:
* gst/matroska/ebml-write.c: (gst_ebml_write_finalize),
(gst_ebml_write_set_cache):
Unref the write cache in finalize if it was set and add add "FIXME"
to a comment that needs it.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_push_dvd_clut_change_event):
Convert subtitle palette info in VobSub private data from VobSub's
(buggy) RGB to YUV.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* gst/matroska/matroska-mux.c: (gst_matroska_mux_collected):
Update the track duration if the old one was invalid.
Fixes bug #532117.
Original commit message from CVS:
* gst/matroska/ebml-read.c: (gst_ebml_read_seek):
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_handle_seek_event),
(gst_matroska_demux_parse_contents_seekentry),
(gst_matroska_demux_loop):
Fix the Forte build by making function declaration signatures
match the implementations.
Original commit message from CVS:
* gst/matroska/ebml-ids.h:
Add ID for EBML CRC32 elements.
* gst/matroska/Makefile.am:
* gst/matroska/ebml-read.c: (gst_ebml_finalize),
(gst_ebml_read_class_init), (gst_ebml_read_peek_bytes),
(gst_ebml_read_get_length), (_ext2dbl), (gst_ebml_read_float),
(gst_ebml_read_header):
Support reading 80bit floats, add finalize method to clean up
in any case, support reading length/id elements with any length
as long as it's smaller than our supported maximum, don't leak
buffers if reading as much data as we wanted failed and some
smaller cleanup.
Original commit message from CVS:
* gst/matroska/ebml-read.c:
Use GINT64 formatting constants from GLIB.
* gst/matroska/matroska-demux.c:
Add some guards to avoid a possible division by 0 and crashing
with NULL events on some systems.
Use gst_gdouble_to_guint64 somewhere instead of an implicit
conversion.
* gst/matroska/matroska-mux.c:
Check for invalid timestamps in a bunch of places to avoid
writing bogus durations into the output file.
Fix some double<->gint64 conversions that weren't using
gst_guint64_to_gdouble
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
* gst/matroska/matroska-ids.h:
* gst/matroska/matroska-mux.c:
Fix Dirac mapping. I had previously added a VfW-type
mapping, but it looks like Dirac will get a native Matroska
mapping, and this is the most likely method.
Original commit message from CVS:
2008-02-08 Julien Moutte <julien@fluendo.com>
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_blockgroup_or_simpleblock): Flag
keyframe and delta units correctly when dealign with a
BlockGroup.
Fixes: #514397
Original commit message from CVS:
Patch by: Bjarne Rosengren <bjarne at axis dot com>
* gst/matroska/ebml-write.c: (gst_ebml_write_element_push):
Don't leak buffers when we don't push them downstream.
Fixes bug #514965.
Original commit message from CVS:
* gst/matroska/matroska-mux.c: (COMMON_VIDEO_CAPS_NO_FRAMERATE),
(videosink_templ):
Also fix up pad templates to indicate that image/jpeg doesn't
absolutely require the framerate property to be set (#504081).
Original commit message from CVS:
Based on patch by: Wouter Cloetens <wouter at mind be>
* gst/matroska/matroska-mux.c: (gst_matroska_mux_video_pad_setcaps),
(gst_matroska_mux_request_new_pad), (gst_matroska_mux_release_pad),
(gst_matroska_mux_finish), (gst_matroska_mux_collected):
* gst/matroska/matroska-mux.h:
Keep track of first and last timestamps for each incoming stream,
so we can calculate the total duration for live sources and other
input where we can't query the duration from the start or where
there's no constant framerate from which we can deduce the
duration; also use calculated/observed duration if it is bigger
than the previously queried duration. Furthermore, use
gst_pad_query_peer_duration() and take into account that it may
return TRUE but still a duration of CLOCK_TIME_NONE, which easily
screws up comparisons when using unsigned integers. Fixes#504081.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw skynet be>
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_push_dvd_clut_change_event),
(gst_matroska_demux_parse_blockgroup_or_simpleblock),
(gst_matroska_demux_subtitle_caps):
* gst/matroska/matroska-ids.h:
Extract palette data for dvd subpicture streams and send it
downstream as custom gstreamer dvd event (fixes#453417).
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
Fix setting the discont flag on the first buffer
pushed downstream for formats with private codec
data that needs to be deserialised into buffers
(such as vorbis and FLAC when in a matroska container).
Original commit message from CVS:
* gst/matroska/Makefile.am:
If zlib is available and used, we must link it explicitly for
things to work on MingW (fixes#392855).
Original commit message from CVS:
* gst/matroska/matroska-mux.c:
(gst_matroska_mux_audio_pad_setcaps):
The "signed" field in audio caps is of boolean type, trying to use
gst_structure_get_int() to extract it will fail. Fixing this makes
matroskamux accept raw audio input (#387121) (use at your own risk
though, due to the matroska spec being not entirely useful in this
respect).
Also fix up raw audio structures in template caps so that they
represent what our setcaps function will actually accept, so that
converters know what to convert to.
Finally, don't fail if there isn't an "endianness" field in 8-bit
PCM caps.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_add_stream),
(gst_matroska_demux_video_caps):
* gst/matroska/matroska-ids.c:
(gst_matroska_track_init_video_context):
* gst/matroska/matroska-ids.h:
Try harder to extract the framerate for video tracks correctly and
save it directly instead of converting it back and forth a few
times. Mostly makes a difference for very small framerates (<1).
Fixes#380199.
Original commit message from CVS:
* gst/matroska/matroska-mux.c: (gst_matroska_mux_class_init),
(gst_matroska_mux_request_new_pad):
Use GST_DEBUG_FUNCPTR; activate request pad before returning it.
* tests/check/elements/matroskamux.c: (setup_src_pad),
(setup_sink_pad), (GST_START_TEST):
Activate pads before using them.
Original commit message from CVS:
Patch by: Michal Benes <michal dot benes at itonis tv>
* gst/matroska/matroska-demux.c: (gst_matroska_demux_encoding_cmp),
(gst_matroska_demux_read_track_encodings),
(gst_matroska_decode_buffer):
Fix several issues with encoded/compressed/encrypted/signed tracks;
also, remove superfluous newline characters from some debug
statements. (#366155)
Original commit message from CVS:
Patch by: Frédéric Riss <frederic.riss at gmail dot com>
* gst/matroska/matroska-demux.c: (gst_matroska_track_free),
(gst_matroska_demux_reset),
(gst_matroska_demux_read_track_encodings),
(gst_matroska_demux_add_stream), (gst_matroska_decode_buffer),
(gst_matroska_demux_parse_blockgroup_or_simpleblock),
(gst_matroska_demux_subtitle_caps):
* gst/matroska/matroska-ids.h:
Add support for VOBSUB subtitle tracks and zlib-compressed
tracks. Make sure we start on a keyframe after a seek. (#343348)
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_push_hdr_buf),
(gst_matroska_demux_push_flac_codec_priv_data),
(gst_matroska_demux_push_xiph_codec_priv_data),
(gst_matroska_demux_parse_blockgroup_or_simpleblock),
(gst_matroska_demux_video_caps), (gst_matroska_demux_audio_caps):
* gst/matroska/matroska-ids.h:
Add basic FLAC support (#311586), not perfect yet though, needs some
tweaking in flacdec; also, seeking could be better.
Do better bounds checking when deserialising vorbis stream headers
to make sure we don't read beyond the end of the buffer on bad input.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_add_stream),
(gst_matroska_demux_send_event),
(gst_matroska_demux_loop_stream_parse_id):
* gst/matroska/matroska-ids.h:
Send tag event after newsegment event.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_check_subtitle_buffer),
(gst_matroska_demux_parse_blockgroup_or_simpleblock),
(gst_matroska_demux_subtitle_caps):
* gst/matroska/matroska-ids.c:
(gst_matroska_track_init_subtitle_context):
* gst/matroska/matroska-ids.h:
Try to fix up broken matroska files containing subtitle
streams with non-UTF8 character encodings (courtesy of
mkvmerge) using either the encoding specified in the
GST_SUBTITLE_ENCODING environment variable or the
current locale's character set if it is non-UTF8.
Fixes#337076.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_add_stream):
No language specified means the implied language is English
according to the matroska spec (partially fixes#344708);
add some more debug output.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet be>
* gst/matroska/matroska-mux.c: (gst_matroska_mux_change_state):
gst_collect_pads_stop() needs to be called before chaining up
to the parent class (#342734).
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_add_stream),
(gst_matroska_demux_push_xiph_codec_priv_data),
(gst_matroska_demux_parse_blockgroup_or_simpleblock),
(gst_matroska_demux_video_caps), (gst_matroska_demux_audio_caps):
* gst/matroska/matroska-ids.h:
* gst/matroska/matroska-mux.c: (gst_matroska_mux_base_init),
(gst_matroska_mux_video_pad_setcaps),
(xiph3_streamheader_to_codecdata),
(vorbis_streamheader_to_codecdata),
(theora_streamheader_to_codecdata),
(gst_matroska_mux_audio_pad_setcaps),
(gst_matroska_mux_write_data):
Add support for muxing/demuxing theora video (#342448; too bad
none of the usual linux players can actually play this). Playback
in GStreamer will require additional changes to theoradec in -base.
Refactor streamheaders <=> CodecPrivateData code a bit; some small
cleanups.
Original commit message from CVS:
Patch by: Michal Benes <michal dot benes at xeris dot cz>
* gst/matroska/matroska-demux.c: (gst_matroska_demux_reset):
Don't leak caps when freeing the stream context (#340623).
Original commit message from CVS:
* gst/matroska/matroska-mux.c:
(gst_matroska_mux_stream_is_vorbis_header),
(gst_matroska_mux_write_data):
Don't strcmp() NULL strings.
Only start new clusters on video keyframes, not on any
random audio buffer that doesn't have the DELTA_UNIT
flag set (fixes 'make check' again).
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet be>
* gst/matroska/matroska-mux.c: (gst_matroska_mux_best_pad),
(gst_matroska_mux_stream_is_vorbis_header),
(gst_matroska_mux_write_data):
Don't misinterpret GST_CLOCK_TIME_NONE as very high timestamp
value and then dead-lock when muxing vorbis audio streams
(the three vorbis header buffers carry no timestamp, and it
would try to mux these after all video buffers). Fixes#340346.
Improve clustering: start a new cluster also whenever we get
a keyframe.
Original commit message from CVS:
* gst/matroska/Makefile.am:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_add_stream),
(gst_matroska_demux_handle_src_event):
* gst/matroska/matroska-ids.c:
(gst_matroska_track_init_video_context),
(gst_matroska_track_init_audio_context),
(gst_matroska_track_init_subtitle_context),
(gst_matroska_track_init_complex_context):
* gst/matroska/matroska-ids.h:
Handle case where the TrackType ebml chunk does not come before the
TrackInfoAudio or TrackInfoVideo ebml chunk (#339446). Ignore QoS
events.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet dot be>
* gst/matroska/matroska-demux.c: (gst_matroska_demux_video_caps):
Handle codec_data for VfW compatibility codec IDs (#339451)
* gst/matroska/matroska-mux.c:
(gst_matroska_mux_video_pad_setcaps):
Same here, handle codec_data and add additional caps we can handle
now to the pad template (huffyuv, dv and h263 video) (#339451)
Original commit message from CVS:
Patch by: Josef Zlomek <josef dot zlomek at itonis dot tv>
* gst/matroska/matroska-mux.c:
(gst_matroska_mux_create_buffer_header),
(gst_matroska_mux_write_data):
Fix timestamping of B-frames, use signed integers, do
some rounding (#339678).
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroskademux_do_index_seek):
Fix a bad conversion using gst_guint64_to_gdouble.
fabs ((gdouble) demux->index[entry].time - (gdouble) seek_pos) can not be
replaced by fabs (gst_guint64_to_gdouble (demux->index[entry].time - seek_pos)) as the
difference could be negative. fabs (gst_guint64_to_gdouble (demux->index[entry].time) -
gst_guint64_to_gdouble (seek_pos)) is the good solution. Thanks to Tim who has seen my
mistake.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroskademux_do_index_seek):
Use gst_guint64_to_gdouble for conversions
* win32/vs6/gst_plugins_good.dsw:
* win32/vs6/libgsticydemux.dsp:
Add a project file for icydemux
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_add_stream),
(gst_matroskademux_do_index_seek),
(gst_matroska_demux_handle_seek_event),
(gst_matroska_demux_parse_blockgroup_or_simpleblock):
* gst/matroska/matroska-ids.h:
Set DISCONT flag on first buffer after a discontinuity.
Fix newsegment events sent when seeking and honour KEY_UNIT
seek flag. Create pad with bogus caps if we don't recognise
the stream codec id.
* gst/matroska/matroska-demux.h:
Fix GObject macros.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet dot be>
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_handle_seek_event), (gst_matroska_demux_loop):
Handle end of segment properly when set; don't dead-lock when
posting start of segment message when doing a segment seek.
Fixes#338810.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_audio_caps),
(gst_matroska_demux_plugin_init):
Make mpeg2 aac audio work: create artificial private codec data
chunk which faad2 seems to require, just as we do for mpeg4 aac.
Also call gst_riff_init(). Partially fixes#338767.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_base_init),
(gst_matroska_demux_handle_seek_event),
(gst_matroska_demux_video_caps), (gst_matroska_demux_audio_caps),
(gst_matroska_demux_subtitle_caps),
(gst_matroska_demux_plugin_init):
Use static pad templates with ANY caps for audio and video
source pads and get rid of a lot of unnecessary (and partially
broken) code for the template caps. Clean up caps finding
functions. Fixes playback of audio files/streams that do not
contain the sample rate and/or number of channels in the audio
context (happens a lot with vorbis/mp3 .mka files it seems).
Fixes#337183.
Also add myself to copyright holders.
Original commit message from CVS:
* gst/matroska/ebml-read.c: (gst_ebml_read_sint):
Even better would be if we actually did the right thing
here (also, G_GUINT64_CONSTANT only exists since GLib-2.10).
Original commit message from CVS:
* gst/matroska/ebml-read.c: (gst_ebml_read_sint):
Can't just replace 1LL with 1L here just because MSVC doesn't
support it, as it might lead to incorrect results when doing the
bitshifting here. Using GLib's G_GUINT64_CONSTANT() macro to
force a 64-bit constant in a way that all compilers are happy with.
Original commit message from CVS:
* ext\jpeg\smokecodec.c:
use of GST_DEBUG instead of DEBUG(a...) for WIN32
* ext\speex\gstspeexenc.c: (gst_speexenc_set_header_on_caps):
move first instruction after all variables declarations
* gst\alpha\gstalpha.c:
* gst\effectv\gstshagadelic.c:
* gst\smpte\paint.c:
* gst\videofilter\gstvideobalance.c:
define M_PI if it's not defined (it's not defined on WIN32)
* gst\cutter\gstcutter.c: (gst_cutter_chain):
* gst\id3demux\id3v2frames.c: (parse_relative_volume_adjustment_two):
* gst\level\gstlevel.c: (gst_level_set_property), (gst_level_transform_ip):
* gst\matroska\matroska-demux.c: (gst_matroska_demux_parse_info),
(gst_matroska_demux_video_caps):
* gst\matroska\matroska-mux.c: (gst_matroska_mux_start), (gst_matroska_mux_finish):
* gst\wavparse\gstwavparse.c: (gst_wavparse_stream_data):
use gst_guint64_to_gdouble for conversions
* gst\goom\filters.c: (setPixelRGB_):
fix a debug which was using undefined variable
* gst\level\gstlevel.c: (gst_level_set_caps), (gst_level_transform_ip):
* gst\matroska\ebml-read.c: (gst_ebml_read_sint):
replace LL suffix with L suffix (LL isn't supported by MSVC6.0)
* win32/vs6:
add vs6 projects files for most of plugins-good
Original commit message from CVS:
* gst/matroska/ebml-write.c: (gst_ebml_write_element_push):
Ensure that we set correct caps on buffers that are transferred
direct from the input.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_subtitle_caps),
(gst_matroska_demux_plugin_init):
* gst/matroska/matroska-ids.h:
Recognise SSA/ASS and USF subtitle formats and
set proper caps when they are found.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_sync_streams):
Advance stream time for lagging subtitle streams by sending
newsegment events with the update flag set.
Original commit message from CVS:
* gst/matroska/ebml-write.c: (gst_ebml_write_reset),
(gst_ebml_write_flush_cache), (gst_ebml_write_element_push),
(gst_ebml_write_seek):
* gst/matroska/ebml-write.h:
Make sure we send a newsegment event in BYTES format
before sending buffers (#328531).
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_video_caps),
(gst_matroska_demux_audio_caps), (gst_matroska_demux_plugin_init):
* gst/matroska/matroska-ids.h:
Added recognition of Real Audio and Video streams in matroska demuxer.
Original commit message from CVS:
* gst/matroska/matroska-mux.c:
(gst_matroska_mux_video_pad_setcaps):
Look for pixel-aspect-ratio in caps, not pixel_width and
pixel_height (Fixes: #322645)
Original commit message from CVS:
* gst/matroska/matroska-mux.c:
(gst_matroska_mux_video_pad_setcaps):
From Michal Benes:
frame duration should be GST_SECOND / framerate, not
GST_SECOND * framerate. (Fixes: #322643)
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_demux_sync_streams):
Filler events are gone for now, comment out section generating
them.
Original commit message from CVS:
2005-11-20 Julien MOUTTE <julien@moutte.net>
* gst/matroska/matroska-mux.c: (gst_matroska_mux_start): Replace
GST_PAD_IS_USABLE by something approaching it.
Original commit message from CVS:
2005-11-20 Julien MOUTTE <julien@moutte.net>
* gst/matroska/matroska-mux.c: (gst_matroska_mux_start): Fix for
API changes.
* gst/wavenc/gstwavenc.c: (gst_wavenc_chain): Fix for API
changes,
but also fix the code that was not checking return values from
pad_push neither using pad_alloc_buffer.
Original commit message from CVS:
Reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* gst/matroska/matroska-demux.c: (gst_matroskademux_do_index_seek):
When seeking, seek to closest index entry at or before the requested
seek position, not just the closest one (#321001).
Original commit message from CVS:
Reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* gst/matroska/matroska-mux.c: (gst_matroska_mux_write_data):
Don't try to ready buffer duration from buffer that we don't
own any longer and that might already have been unreffed.
(#321136)
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_push_vorbis_codec_priv_data),
(gst_matroska_demux_add_wvpk_header):
Don't error out when the source pad isn't linked.
Original commit message from CVS:
Patch by: Michal Benes <michal.benes@xeris.cz>
* check/Makefile.am:
* gst/matroska/ebml-write.c: (gst_ebml_write_seek):
* gst/matroska/matroska-mux.c: (gst_matroska_mux_handle_src_event),
(gst_matroska_mux_audio_pad_setcaps), (gst_matroska_mux_start):
add a unit test for matroskamux
fix the bugs that the unit test exposed
Original commit message from CVS:
Reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* gst/matroska/ebml-write.c: (gst_ebml_write_new),
(gst_ebml_write_reset), (gst_ebml_write_element_new):
* gst/matroska/ebml-write.h:
* gst/matroska/matroska-mux.c: (gst_matroska_mux_write_data):
Set timestamps on outgoing ebml headers as well, so that the
element after matroskamux can get the timestamp already when
reading the first ebml element and doesn't have to wait for
the actual data buffer for that (#320308).
Original commit message from CVS:
* ext/speex/gstspeexenc.c: (gst_speexenc_get_query_types),
(gst_speexenc_src_query):
Add position and duration query, fix query type function.
* gst/matroska/matroska-demux.c: (gst_matroska_demux_add_stream),
(gst_matroska_demux_video_caps), (gst_matroska_demux_audio_caps):
Let's not set non-fixed caps on source pads.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_handle_src_query),
(gst_matroska_demux_handle_seek_event),
(gst_matroska_demux_loop_stream_parse_id):
Fix duration query; fix basetime in newsegment event after
seek; fix duration in initial newsegment event.
* gst/matroska/matroska-mux.c:
(gst_matroska_mux_audio_pad_setcaps), (gst_matroska_mux_start):
Extract number of channels and samplerate from vorbis headers;
add some debug messages when querying the durations of the
input streams.
Original commit message from CVS:
Reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* gst/matroska/matroska-mux.c:
(gst_matroska_mux_video_pad_setcaps),
(gst_matroska_mux_audio_pad_setcaps):
Fix mpeg4 input handling (#318847); also, while we're at it,
fix media type for Motion-JPEG: should be image/jpeg.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_blockgroup):
Fix logic error in timing of subtitle stream synchronization.
* gst/typefind/gsttypefindfunctions.c: (qt_type_find):
Add skip-chunk, which is found in kodak-camera streams.
Original commit message from CVS:
* gst/matroska/ebml-read.c: (gst_ebml_read_buffer):
Allow for 0-sized buffers. Fixes length query problems in
starwars.mkv from the testsuite.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_change_state):
Reset variables on READY.
* gst/matroska/matroska-mux.c: (gst_matroska_mux_request_new_pad),
(gst_matroska_mux_loop):
Require data before writing header.
Original commit message from CVS:
* ext/dv/gstdvdec.c:
Fix audio caps i just broke (missing ',')
* gst/matroska/matroska-mux.c: (gst_matroska_mux_get_type),
(gst_matroska_mux_reset):
Fix typo + add FIXME about old "x-gst-metadata" crap
Original commit message from CVS:
Remove time-based check for first vorbis packet altogether, as it
was a hack since day one (Arwed who wrote it says so)...
Original commit message from CVS:
Fix Vorbis streams failing to decode in some files, where cluster_time isn't 0,
because then it doesn't send codec_priv before actual data.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_blockgroup):
Save position, so that queries give proper return values. Don't
know how this could ever have worked before...
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (gst_matroska_ebmlnum_uint),
(gst_matroska_ebmlnum_sint), (gst_matroska_demux_parse_blockgroup):
Lace sizes can be zero.
Original commit message from CVS:
* gst/matroska/matroska-demux.c: (aac_rate_idx), (aac_profile_idx),
(gst_matroska_demux_audio_caps):
Some MPEG-AAC hacks, because else it doesn't work...
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_handle_src_query):
Don't set DEFAULT, unsupported - makes length display incorrectly
in some cases.
Original commit message from CVS:
* gst/matroska/ebml-read.c: (gst_ebml_read_class_init),
(gst_ebml_read_init), (gst_ebml_read_use_event),
(gst_ebml_read_element_id), (gst_ebml_peek_id),
(gst_ebml_read_seek), (gst_ebml_read_skip),
(gst_ebml_read_reserve), (gst_ebml_read_buffer),
(gst_ebml_read_master):
* gst/matroska/ebml-read.h:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_contents),
(gst_matroska_demux_loop_stream), (gst_matroska_demux_audio_caps):
Disgustingly evil hack for working around INTERRUPT events and
their extremely annoying habit of being a pain in the ass. We
simply peek a cluster before reading any of it.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c:
add ATRAC3 to STATIC CAPS to fix a warning
* gst/matroska/ebml-read.c:
* gst-libs/gst/riff/riff-read.c:
fix typos
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (dvdreadsrc_class_init),
(dvdreadsrc_init), (dvdreadsrc_dispose), (dvdreadsrc_set_property),
(dvdreadsrc_get_property), (_open), (_seek), (_read),
(dvdreadsrc_get), (dvdreadsrc_open_file),
(dvdreadsrc_change_state):
Fix. Don't do one big huge loop around the whole DVD, that will
cache all data and thus eat sizeof(dvd) (several GB) before we
see something.
* gst-libs/gst/riff/riff-read.c: (gst_riff_read_seek):
Actually NULL'ify event after using it.
* gst/matroska/ebml-read.c: (gst_ebml_read_use_event),
(gst_ebml_read_handle_event), (gst_ebml_read_element_id),
(gst_ebml_read_element_length), (gst_ebml_read_element_data),
(gst_ebml_read_seek), (gst_ebml_read_skip):
Handle events.
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_base_init),
(gst_dvd_demux_init), (gst_dvd_demux_get_audio_stream),
(gst_dvd_demux_get_subpicture_stream), (gst_dvd_demux_plugin_init):
Fix timing (this will probably break if I seek using menus, but
I didn't get there yet). VOBs and normal DVDs should now work.
Add a mpeg2-only pad with high rank so this get autoplugged for
MPEG-2 movies.
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_base_init),
(gst_mpeg_demux_class_init), (gst_mpeg_demux_init),
(gst_mpeg_demux_new_output_pad), (gst_mpeg_demux_get_video_stream),
(gst_mpeg_demux_get_audio_stream),
(gst_mpeg_demux_get_private_stream), (gst_mpeg_demux_parse_packet),
(gst_mpeg_demux_parse_pes), (gst_mpeg_demux_plugin_init):
Use this as second rank for MPEG-1 and MPEG-2. Still use this for
MPEG-1 but use dvddemux for MPEG-2.
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_class_init),
(gst_mpeg_parse_init), (gst_mpeg_parse_new_pad),
(gst_mpeg_parse_parse_packhead):
Timing. Only add pad template if it exists. Add sink template from
class and not from ourselves. This means we will always use the
correct sink template even if it is not the one defined in this
file.
Original commit message from CVS:
* ext/dirac/Makefile.am:
* ext/dirac/gstdirac.cc:
* ext/dirac/gstdiracdec.cc:
* ext/dirac/gstdiracdec.h:
Do something. Don't actually know if this works because I don't
have a demuxer yet.
* ext/gsm/gstgsmdec.c: (gst_gsmdec_getcaps):
Add channels=1 to caps returned from _getcaps().
* ext/ogg/gstogmparse.c: (gst_ogm_audio_parse_get_type),
(gst_ogm_video_parse_get_type), (gst_ogm_audio_parse_base_init),
(gst_ogm_video_parse_base_init), (gst_ogm_parse_init),
(gst_ogm_audio_parse_init), (gst_ogm_video_parse_init),
(gst_ogm_parse_sink_convert), (gst_ogm_parse_chain),
(gst_ogm_parse_change_state):
Separate between audio/video so ogmaudioparse actually uses the
audio pad templates. Both audio and video work now, including
autoplugging. Also use sometimes-srcpad hack.
* gst-libs/gst/riff/riff-read.c: (gst_riff_read_seek):
Handle events better. Don't hang on infinite loops.
* gst/avi/gstavidemux.c: (gst_avi_demux_class_init),
(gst_avi_demux_init), (gst_avi_demux_reset),
(gst_avi_demux_src_convert), (gst_avi_demux_handle_src_query),
(gst_avi_demux_stream_header), (gst_avi_demux_stream_data),
(gst_avi_demux_change_state):
* gst/avi/gstavidemux.h:
Improve A/V sync. Still not perfect.
* gst/matroska/ebml-read.c: (gst_ebml_read_seek),
(gst_ebml_read_skip):
Handle events better.
* gst/qtdemux/qtdemux.c: (gst_qtdemux_handle_sink_event),
(gst_qtdemux_loop_header), (qtdemux_parse_trak),
(qtdemux_audio_caps):
Add IMA4. Improve event handling. Save offset after a seek when
the headers are at the end of the file so that we don't end up in
an infinite loop.
* gst/typefind/gsttypefindfunctions.c: (qt_type_find):
Add low-priority typefind support for files with no length.
Original commit message from CVS:
Write track and segment UIDs, write muxing date, write TRACKDEFAULTDURATION for TTA audio, write BLOCKDURATION if known.
Original commit message from CVS:
Fix byte order reversion for writing ebml floats.
Write segment duration and muxing application in matroska.
Added TTA codec to the list of supported codecs to mux into matroska.
Original commit message from CVS:
Interpret BLOCKDURATION and set buffer duration accordingly, enable demuxing
of TTA audio from matroska, fixes bugs #148950 and #148951.
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_video_caps_with_data):
mp42/mp43 (no caps) exist too.
* gst/matroska/matroska-demux.c: (gst_matroska_demux_video_caps):
Set pixel_width/height; we've got them in-caps.
* gst/typefind/gsttypefindfunctions.c: (plugin_init):
* gst/wavparse/gstwavparse.c: (plugin_init):
Both are valid primary.
* sys/oss/gstossmixer.c:
Remove i18n hack and enable translations.
Original commit message from CVS:
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_metadata):
* gst/matroska/matroska-ids.h:
Basic tag reading support.
Original commit message from CVS:
reviewed by: <delete if not using a buddy>
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_video_caps_with_data),
(gst_riff_create_video_caps), (gst_riff_create_audio_caps),
(gst_riff_create_video_template_caps),
(gst_riff_create_audio_template_caps):
* gst-libs/gst/riff/riff-media.h:
* gst-libs/gst/riff/riff-read.c:
(gst_riff_read_strf_vids_with_data), (gst_riff_read_strf_vids):
* gst-libs/gst/riff/riff-read.h:
* gst/avi/gstavidemux.c: (gst_avi_demux_add_stream):
Add MS RLE support. I added some functions to read out strf chunks
into strf chunks and the data behind it. This is usually color
palettes (as in RLE, but also in 8-bit RGB). Also use those during
caps creation. Lastly, add ADPCM (similar to wavparse - which
should eventually be rifflib based).
* gst/matroska/matroska-demux.c: (gst_matroska_demux_class_init),
(gst_matroska_demux_init), (gst_matroska_demux_reset):
* gst/matroska/matroska-demux.h:
Remove placeholders for some prehistoric tagging system. Didn't add
support for any tag system really anyway.
* gst/qtdemux/qtdemux.c:
Add support for audio/x-m4a (MPEG-4) through spider.
* gst/wavparse/gstwavparse.c: (gst_wavparse_parse_fmt),
(gst_wavparse_loop):
ADPCM support (#135862). Increase max. buffer size because we
cannot split buffers for ADPCM (screws references) and I've seen
files with 2048 byte chunks. 4096 seems safe for now.
Original commit message from CVS:
2004-01-30 Ronald Bultje <rbultje@ronald.bitfreak.net>
* gst-libs/gst/riff/riff-read.c: (gst_riff_peek_head),
(gst_riff_read_seek):
* gst/matroska/ebml-read.c: (gst_ebml_read_element_id),
(gst_ebml_read_seek):
Fix event handling.
Original commit message from CVS:
2004-01-14 Ronald Bultje <rbultje@ronald.bitfreak.net>
* gst/matroska/matroska-demux.c: (gst_matroska_demux_add_stream):
Fix for using incremental number on padnames.
Original commit message from CVS:
2004-01-04 Ronald Bultje <rbultje@ronald.bitfreak.net>
* gst/matroska/matroska-demux.c:
Fix EBML-laced block parsing. Diffs are relative to previous
lace, not the first lace. Thanks to Mosu from the Matroska
team for detecting this.
(gst_matroska_demux_parse_blockgroup):
* gst/wavparse/gstwavparse.c: (gst_wavparse_init),
(gst_wavparse_parse_fmt), (gst_wavparse_getcaps),
(gst_wavparse_handle_sink_event), (gst_wavparse_loop),
(gst_wavparse_change_state):
* gst/wavparse/gstwavparse.h:
Quickfix for capsnego.
Original commit message from CVS:
2004-01-04 Ronald Bultje <rbultje@ronald.bitfreak.net>
* gst/matroska/matroska-demux.c: (gst_matroska_demux_src_getcaps),
(gst_matroska_demux_add_stream):
* gst/matroska/matroska-ids.h:
Add getcaps() function to fix capsnego...
Original commit message from CVS:
2004-01-02 Ronald Bultje <rbultje@ronald.bitfreak.net>
* gst/matroska/ebml-read.c: (gst_ebml_read_sint):
* gst/matroska/ebml-write.c: (gst_ebml_write_sint):
fix signed integer reading/writing.
Original commit message from CVS:
2003-12-21 Ronald Bultje <rbultje@ronald.bitfreak.net>
* configure.ac:
Improve mpeg2enc detection. This is for distributions that do
ship mjpegtools, but without mpeg2enc. Also does object check
for might there ever be ABI incompatibility.
* ext/mpeg2enc/gstmpeg2enc.cc:
Add Andrew as second maintainer (he's helping me), and also add
an error if no caps was set. This happens if I pull before capsnego
and that's something I should solve sometime else.
* gst/matroska/matroska-demux.c:
(gst_matroska_demux_parse_blockgroup):
Fix time parsing.
* gst/matroska/matroska-mux.c: (gst_matroska_mux_audio_pad_link),
(gst_matroska_mux_track_header):
Add caps to templates.
* gst/mpegaudioparse/gstmpegaudioparse.c: (mp3_sink_factory):
Add mpegversion=1 to prevent confusion with MPEG/AAC.
* gst/mpegstream/gstmpegdemux.c:
Remove layer since it causes warnings about unfixed caps.
* gst/videotestsrc/gstvideotestsrc.c: (gst_videotestsrc_get):
Fix obvious typo (we error out if caps were set, we should of
course error out if *no* caps were set).
* sys/oss/gstosselement.c: (gst_osselement_convert):
Fix format conversion, we confused bits/bytes.
* sys/oss/gstosselement.h:
Improve documentation for 'bps'.
* sys/v4l/TODO:
Remove stuff about plugins that need removing - this was done
ages ago.
* sys/v4l/gstv4lmjpegsrc.c: (gst_v4lmjpegsrc_init),
(gst_v4lmjpegsrc_src_convert), (gst_v4lmjpegsrc_src_query):
* sys/v4l/gstv4lsrc.c: (gst_v4lsrc_init), (gst_v4lsrc_src_convert),
(gst_v4lsrc_src_query):
* sys/v4l2/gstv4l2src.c: (gst_v4l2src_init),
(gst_v4l2src_src_convert), (gst_v4l2src_src_query):
Add get_query_types(), get_formats() and query() functions.
Original commit message from CVS:
Sorry Dave... Add mpegversion=1 to mp3 caps everywhere so that the autoplugger uses mad and not faad for mp3 decoding. This should fix mp3 playback.
