Commit graph

382 commits

Author SHA1 Message Date
Thibault Saunier
b541208b77 android: Make it ready for androgenizer
Remove the android/ top dir
Fixe the Makefile.am to be androgenized

To build gstreamer for android we are now using androgenizer which generates the needed Android.mk files.
Androgenizer can be found here: http://git.collabora.co.uk/?p=user/derek/androgenizer.git
2011-04-11 01:20:11 +02:00
Havard Graff
93f022d6ab rtpsession: fix wrongly applied patch
Obviously recv_rtp_sink does not have much to do with send_rtcp_src...
See commit 046ff170.

https://bugzilla.gnome.org/show_bug.cgi?id=647263
2011-04-09 12:32:37 +01:00
Havard Graff
e71a908d96 jitterbuffer: Make src_query MT-safe
It is possible that the element might be going down while the event arrives
2011-04-08 15:23:05 +02:00
Sebastian Dröge
4c36ca30b2 jitterbuffer: Unref event if the parent element disappeared 2011-04-08 15:22:19 +02:00
Havard Graff
342686bb02 jitterbuffer: Make upstream events MT-safe 2011-04-08 15:21:46 +02:00
Sebastian Dröge
31af4fe33e rtp: Unref events if the parent element disappeared 2011-04-08 15:20:51 +02:00
Ole André Vadla Ravnås
046f170d6a rtpmanager: fix pad callbacks so they handle when parent goes away
1) We need to lock and get a strong ref to the parent, if still there.
2) If it has gone away, we need to handle that gracefully.

This is necessary in order to safely modify a running pipeline. Has been
observed when a streaming thread is doing a buffer_alloc() while an
application thread sends an event on a pad further downstream, and from
within a pad probe (holding STREAM_LOCK) carries out the pipeline plumbing
while the streaming thread has its buffer_alloc() in progress.
2011-04-08 15:16:56 +02:00
Havard Graff
f8370bb2a8 rtpsession: make iterate_internal_links MT-safe 2011-04-08 14:41:34 +02:00
Mark Nauwelaerts
e5bcaa45e6 Revert "jitterbuffer: reset element base_time upon flush"
This reverts commit f84b8a69cb.

Fixes bug #646397.
2011-04-04 11:49:00 +02:00
Mark Nauwelaerts
6bc1aa0e59 jitterbuffer: handle position query 2011-03-09 17:18:08 +01:00
Mark Nauwelaerts
1f7f434df6 jitterbuffer: also estimate eos if very near eos 2011-03-07 16:56:43 +01:00
Mark Nauwelaerts
3c9a4239bf jitterbuffer: avoid trying to buffer more than is available.
That is, in case of short (or near eos of) stream, deadlock (until timeout)
would occur trying to buffer more than is yet forthcoming.
2011-03-07 16:56:18 +01:00
Mark Nauwelaerts
f84b8a69cb jitterbuffer: reset element base_time upon flush
... to arrange for properly scheduled timeout (following seek).
2011-03-07 11:07:12 +01:00
Blaise Gassend
0f88181f43 rtpbin: handle NULL demux elements
When using gstrtpbin with ignore-pt=true, the free_stream function tries to
call gst_element_set_locked_state and gst_element_set_state on a stream->demux
which is NULL.

fixes #642412
2011-02-22 13:31:35 +01:00
Wim Taymans
45ea930a99 rtpbin: fix setting the SDES property
Only the sdes veriable is protected with the object lock.
Use the right object when setting the sdes property.
2011-02-21 17:19:05 +01:00
Wim Taymans
61382aad28 source: fix type of ntpnstime 2011-02-02 18:30:47 +01:00
Wim Taymans
8598aaf81b rtpbin: Get and use the NTP time when receiving RTCP
When we receive an RTCP packet, get the current NTP time in nanseconds so that
we can correctly calculate the round-trip time.
2011-02-02 18:30:46 +01:00
Olivier Crête
cd923223dd rtpsession: Add action signal to request early RTCP 2011-02-01 18:28:51 +01:00
Olivier Crête
c0996e6b90 rtpsession: Add callback to get the current time 2011-02-01 18:28:51 +01:00
Olivier Crête
a630c68fc3 rtpsession: Don't relay more than one PLI request per RTT
Drop PLI requests if one was relay in the last RTT, the other side may
just not have received the keyframe yet.
2011-02-01 18:28:51 +01:00
Olivier Crête
a61bb9e94b rtpsession: Send GstForceKeyUnit event in response to received RTCP PLI 2011-02-01 18:28:51 +01:00
Sjoerd Simons
7350d2adfa gstrtpsession: Fallback for FIR to PLI if PLI isn't available 2011-02-01 18:28:51 +01:00
Olivier Crête
52f95fa7ee rtpsession: Implement sending PLI packets in response to GstForceKeyUnit 2011-02-01 18:28:51 +01:00
Olivier Crête
db5150a23a rtpsource: Retain RTCP Feedback packets for a specified amount of time 2011-02-01 18:28:51 +01:00
Olivier Crête
90354ecb49 rtpsession: Make rtcp buffer metadata writable after processing it
Functions that process the rtcp buffer could decide to keep a ref
on the buffer for further processing. So make the metadata writable
only after they are done.
2011-02-01 18:28:50 +01:00
Olivier Crête
1643f427db rtpsession: Emit signal on incoming RTCP FB packet 2011-02-01 18:28:50 +01:00
Wim Taymans
f399b6a641 rtpsession: fix compilation 2011-02-01 18:28:50 +01:00
Olivier Crête
1bde427250 rtpsession: Add method to request early RTCP packet
Implement the early mode defined in RFC 4585. In this mode, RTCP feedback
packets are sent early to notifier.
2011-02-01 17:03:39 +01:00
Olivier Crête
975e1fecb3 rtpsession: Add property for minimum interval between Regular RTCP messages
This can be changed according to RFC 4585
2011-02-01 16:56:15 +01:00
Olivier Crête
cdb5465741 rtpsession: Emit signal when sending a compound RTCP packet
This allows users to add extra RTCP packets to the compound
RTCP packet.
2011-02-01 16:50:58 +01:00
Olivier Crête
589b254ce5 rtpptdemux: Tag upstream custom events with payload type 2011-02-01 16:50:25 +01:00
Olivier Crete
c7b1ce7310 rtpssrcdemux: Tag upstream custom events with SSRC 2011-02-01 16:49:10 +01:00
Olivier Crête
9f073459e0 rtpsession: Emit "on-ssrc-validated" when validating by RTCP
Emit "on-ssrc-validated" if the SSRC is validated by receiving
a RTCP SDES packet.
2011-02-01 16:45:58 +01:00
Stefan Kost
9f34b89245 rtpjitterbuffer: don't divide by 0 2011-01-25 21:57:57 +02:00
Wim Taymans
b5647685c4 rtpsource: use the right variable
Use the right variable for specifying that we sent a receiver report.
2010-12-27 13:13:46 +01:00
Wim Taymans
7caad21a57 rtpsource: include last send RB block
Only report RB values for non-internal sources.
Report not only the RB blocks we last received from but also the last RB
block we sent to a source.
2010-12-23 13:58:30 +01:00
Wim Taymans
8fa5ddab9a rtpsession: remember last sent RB values. 2010-12-23 13:58:30 +01:00
Wim Taymans
6035ee08c0 rtpsource: include all stats and document
Include all possible stats of a source in the stats structure because we might
be interested in what happened in the past.
Document the stats property and the fields.
2010-12-23 13:58:30 +01:00
Wim Taymans
10a5a795ea rtpsession: also emit RTCP activity on SR
Also emit RTCP activity signals when we receive an SR packet without RB blocks,
such as from a sender that is not receiving anything.
2010-12-23 13:58:30 +01:00
Wim Taymans
1230258e6f docs: add some more gstrtpbin docs 2010-12-23 13:58:29 +01:00
Wim Taymans
2b53cbe923 rtpsession: unlock before emitting signals 2010-12-22 11:46:21 +01:00
Wim Taymans
eb6d552353 jitterbuffer: get better buffering level
When the jitterbuffer contains -1 timestamps, make sure we still calculate the
buffer fill level by skipping the -1 buffers.
Try to be more resilient to weird input timestamps.
2010-12-20 15:56:50 +01:00
Wim Taymans
6cb0efede4 jitterbuffer: provide a clock.
since we are using the clock for sync, we need to also provide a clock for good
measure. The reason is that even if downstream elements provide a clock, we
don't want to have that clock selected because it might not be running yet.
2010-12-20 11:13:09 +01:00
Wim Taymans
210f1c44c7 rtpbin: copy buffering stats
when we create an aggregate buffering message, copy the buffering stats form the
last message. At least we get correct buffering mode then.
2010-12-20 11:13:09 +01:00
Wim Taymans
0c3333da04 session: fix average RTCP packet size some more.
Fix stupid error in averaging macro.
Include udp headers in packet length estimation.
2010-12-14 18:12:43 +01:00
Wim Taymans
7ebd374766 rtpbin: correctly calculate RTCP packet size 2010-12-14 17:15:23 +01:00
Wim Taymans
ffc7cd9803 jitterbuffer: avoid leaking sink events
Avoid leaking the newsegment event when it has the wrong format.
2010-12-13 12:57:58 +01:00
Mark Nauwelaerts
46c91476eb rtpssrcdemux: do not hold custom PAD_LOCK when pushing downstream 2010-12-03 15:50:21 +01:00
Olivier Crête
077a61932a rtpbin: Use the right constant to define the "use-pipeline-clock" property
The wrong #define was being used, now use the correct one.
2010-10-14 17:41:30 -04:00
Stefan Kost
d8167e3071 various (gst): add a missing G_PARAM_STATIC_STRINGS flags 2010-10-13 18:00:28 +03:00