Some encoders (Arecont) do not like the long OPTIONS sent at startup as sent by
GStreamer, but do accept the short header as sent by Live555.
This patch makes the extending the request optional by adding a property
(short-header).
Fixes#655805.
API: GstRTSPSrc:short-header
Simplify the command handling; passing a command to thread means we really
want it to get the message, which means to always flush provided the command
can handle being interrupted. Command thread indicates whether command
allows interruption and ensure non-flushing connection as it subsequently
needs it.
In particular, this also makes the TEARDOWN sequence interruptable
and also prevents races where _loop_ could miss a command and would
continue receiving (or at least trying to).
See #632504.
With the async state changes, it is possible that we need to open the stream
before play and pause.
Also make sure we remember a previous open failure so that we don't keep trying
again.
In case server-side fails to perform seek, i.e. PLAY at non-zero requested
position, recovery so far would arrange for streaming to continue, albeit
having lost position tracking in the process. So, query position prior
to seek and use upon failed seek.
To support setups with firewall/ipsec, it is useful for an rtsp client to be
able to set the range of ports that can be used for rtp/rtcp reception.
Allows this by adding a "port-range" property to the rtspsrc element.
Fixes#625153
Keep a global connection for aggregate control but also keep stream connections
for non-aggregate control.
Add some helper methods to connect/close/flush the connections.
Parse the connection info from the SDP.
When we need to configure the multicast destination, fall back to the SDP
connection info when the transport did not specify a destination and ttl.
Fixes#617537
Original commit message from CVS:
Based on patch by: Eric Zhang <chao.zhang at access-company dot com>
* gst/rtsp/gstrtspsrc.c: (gst_rtsp_nat_method_get_type),
(gst_rtspsrc_class_init), (gst_rtspsrc_set_property),
(gst_rtspsrc_get_property), (gst_rtspsrc_create_stream),
(gst_rtspsrc_stream_free),
(gst_rtspsrc_stream_configure_udp_sinks),
(gst_rtspsrc_stream_configure_transport),
(gst_rtspsrc_send_dummy_packets),
(gst_rtspsrc_create_transports_string),
(gst_rtspsrc_handle_message), (gst_rtspsrc_change_state):
* gst/rtsp/gstrtspsrc.h:
Add property to configure NAT traversal method.
Ignore EOS from the internal sinks.
Implement sending dummy packets as a (simple) method to open up
some firewalls.
Send PLAY request to the server after we started the udp sources.
Fixes#559545.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_send), (gst_rtspsrc_open):
* gst/rtsp/gstrtspsrc.h:
Implement redirect for the DESCRIBE reply. Fixes#506025.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_get_bandwidth),
(gst_rtspsrc_collect_bandwidth), (gst_rtspsrc_create_stream),
(gst_rtspsrc_media_to_caps), (gst_rtspsrc_loop_interleaved):
* gst/rtsp/gstrtspsrc.h:
Parse bandwidth modifiers, they are not yet configured in the session
manager because we don't have an API for that yet.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_loop_interleaved),
(gst_rtspsrc_play):
* gst/rtsp/gstrtspsrc.h:
In TCP mode, only timestamp the first buffer. TCP is not real time and
it does not make sense to try to skew compensate, also some servers send
the first batch of data in a burst.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_create_stream),
(gst_rtspsrc_handle_src_query), (gst_rtspsrc_loop_interleaved),
(gst_rtspsrc_loop_udp), (gst_rtspsrc_close):
* gst/rtsp/gstrtspsrc.h:
Set timestamps on RTP buffers in interleaved mode.
Mark first buffers with a DISCONT.
Remove flush hack now that sync for live sources has been figured out.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_do_seek),
(gst_rtspsrc_parse_methods), (gst_rtspsrc_open),
(gst_rtspsrc_play):
* gst/rtsp/gstrtspsrc.h:
Fix method detection again.
Keep track of when we must send a Range header.
Use segment values for Range, Speed and Scale headers.
Parse Speed and Scale headers to update the segment values.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_init),
(gst_rtspsrc_finalize), (gst_rtspsrc_connection_send),
(gst_rtspsrc_connection_receive), (gst_rtspsrc_sink_chain),
(gst_rtspsrc_handle_request), (gst_rtspsrc_send_keep_alive),
(gst_rtspsrc_loop_interleaved), (gst_rtspsrc_loop_udp),
(gst_rtspsrc_try_send), (gst_rtspsrc_pause):
* gst/rtsp/gstrtspsrc.h:
Protect connection activity with a new lock, avoids deadlocks when going
to PAUSED. Fixes#455808.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_set_property),
(gst_rtspsrc_flush), (gst_rtspsrc_sink_chain),
(gst_rtspsrc_stream_configure_udp_sink),
(gst_rtspsrc_send_keep_alive), (gst_rtspsrc_loop_interleaved),
(gst_rtspsrc_loop_udp), (gst_rtspsrc_loop_send_cmd),
(gst_rtspsrc_try_send), (gst_rtspsrc_send),
(gst_rtspsrc_parse_methods), (gst_rtspsrc_parse_range),
(gst_rtspsrc_open), (gst_rtspsrc_close), (gst_rtspsrc_pause),
(gst_rtspsrc_handle_message), (gst_rtspsrc_change_state):
* gst/rtsp/gstrtspsrc.h:
Improve timeout handling.
Use the same socket for sending and receiving RTCP packets so that some
servers can track clients better.
Improve connection closed handling. Try to reconnect.
Don't overwrite our content base with NULL.
Improve debugging.
Improve range parsing and handling.
Remove flushing hack now that core does the right thing.
Original commit message from CVS:
* gst/rtsp/gstrtpdec.c: (gst_rtp_dec_marshal_VOID__UINT_UINT),
(gst_rtp_dec_class_init):
* gst/rtsp/gstrtpdec.h:
Add (dummy) SSRC management signals.
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_class_init),
(gst_rtspsrc_set_property), (gst_rtspsrc_get_property),
(find_stream), (gst_rtspsrc_create_stream), (new_session_pad),
(request_pt_map), (gst_rtspsrc_do_stream_eos), (on_bye_ssrc),
(on_timeout), (gst_rtspsrc_stream_configure_manager),
(gst_rtspsrc_stream_push_event), (gst_rtspsrc_push_event),
(gst_rtspsrc_loop_interleaved), (gst_rtspsrc_parse_rtpinfo),
(gst_rtspsrc_handle_message), (gst_rtspsrc_change_state):
* gst/rtsp/gstrtspsrc.h:
Add connection-speed property.
Add find_stream helper functions.
Handle stream EOS based on BYE messages or SSRC timeout.
Returns SUCCESS from the state change function as we hide our async
elements from the parent.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_create_stream),
(new_session_pad), (gst_rtspsrc_setup_streams):
* gst/rtsp/gstrtspsrc.h:
For container formats we only need to activate one of the streams so
that we correctly signal no-more-pads. Fixes#451015.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_class_init),
(gst_rtspsrc_set_property), (gst_rtspsrc_get_property),
(gst_rtspsrc_stream_configure_udp), (gst_rtspsrc_loop_interleaved),
(gst_rtspsrc_loop_udp), (gst_rtspsrc_try_send), (gst_rtspsrc_send),
(gst_rtspsrc_setup_streams), (gst_rtspsrc_open):
* gst/rtsp/gstrtspsrc.h:
Add TCP timeout property and use it for all TCP connection.
* gst/rtsp/rtspconnection.c: (rtsp_connection_connect),
(rtsp_connection_write), (rtsp_connection_next_timeout),
(rtsp_connection_reset_timeout):
Make connect and writes cancelable and make them use the timeout.
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis com>
* gst/rtsp/gstrtspsrc.h:
* gst/rtsp/rtspconnection.c: (rtsp_connection_receive):
* gst/rtsp/rtspmessage.c: (rtsp_message_init_data),
(rtsp_message_get_header):
* gst/rtsp/rtspmessage.h:
Make channel guint8 where possible.
Make rtsp_message_init_data() take the channel as a guint8.
* gst/rtsp/rtspdefs.c:
Fixed a typo: Timout -> Timeout
* gst/rtsp/rtspdefs.h:
Make RTSP_CHECK() behave as a statement.
* gst/rtsp/sdpmessage.c:
Avoid a compiler warning in INIT_ARRAY().
Fixes#437692.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_flush),
(gst_rtspsrc_do_seek), (gst_rtspsrc_perform_seek),
(gst_rtspsrc_handle_src_event),
(gst_rtspsrc_stream_configure_manager),
(gst_rtspsrc_stream_configure_tcp), (gst_rtspsrc_loop_interleaved),
(gst_rtspsrc_send_keep_alive), (gst_rtspsrc_open),
(gst_rtspsrc_parse_rtpinfo), (gst_rtspsrc_play):
* gst/rtsp/gstrtspsrc.h:
* gst/rtsp/rtspdefs.h:
Preliminary seek support.
Activate internal pads so that we can receive events on them.
Don't try to parse a range string when it's NULL.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_init),
(gst_rtspsrc_finalize), (new_session_pad), (request_pt_map),
(gst_rtspsrc_loop_send_cmd), (gst_rtspsrc_try_send),
(gst_rtspsrc_send), (gst_rtspsrc_async_open), (gst_rtspsrc_close),
(gst_rtspsrc_play), (gst_rtspsrc_handle_message),
(gst_rtspsrc_change_state):
* gst/rtsp/gstrtspsrc.h:
Fix race when multiple udp sources post timeouts, just act on the first
received timeout.
Protect stream list with a recursive lock to fix some races.
Flush connection when we need to do a reconnect or stop.
Make state lock recursive.
* gst/rtsp/rtspconnection.c: (rtsp_connection_connect),
(rtsp_connection_close):
Some small cleanups.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_init),
(gst_rtspsrc_finalize), (gst_rtspsrc_stream_configure_transport),
(gst_rtspsrc_handle_request), (gst_rtspsrc_loop_interleaved),
(gst_rtspsrc_send_keep_alive), (gst_rtspsrc_loop_udp),
(gst_rtspsrc_loop_send_cmd), (gst_rtspsrc_try_send),
(gst_rtspsrc_open), (gst_rtspsrc_handle_message):
* gst/rtsp/gstrtspsrc.h:
Fix sending RTCP to the right place.
Fix bug in reffing the wrong UDP element.
Use new pad names for the session manager.
Implement handling server requests in interleaved and UDP modes.
Handle session keep-alive in UDP modes.
Remove GCond for handling UDP timeouts.
* gst/rtsp/rtspconnection.c: (rtsp_connection_connect),
(rtsp_connection_send), (rtsp_connection_read), (read_body),
(rtsp_connection_receive), (rtsp_connection_close):
* gst/rtsp/rtspconnection.h:
Store connection IP address for later.
Add timeout args to all operations that might block forever.
Parse session timeout.
Only close sockets when not already closed.
* gst/rtsp/rtspdefs.c:
* gst/rtsp/rtspdefs.h:
Add timeout return value and error string.
* gst/rtsp/rtspmessage.c: (rtsp_message_init_response):
Add small comment.
Original commit message from CVS:
* gst/rtsp/gstrtpdec.c: (gst_rtp_dec_class_init),
(gst_rtp_dec_init), (gst_rtp_dec_set_property),
(gst_rtp_dec_get_property):
* gst/rtsp/gstrtpdec.h:
Add dummy latency property to be backwards compat with rtpbin.
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_class_init),
(gst_rtspsrc_set_property), (gst_rtspsrc_get_property),
(gst_rtspsrc_stream_configure_transport),
(gst_rtspsrc_parse_rtpinfo):
* gst/rtsp/gstrtspsrc.h:
Add latency property and configure in the session manager.
Don't set invalid clock-base and seqnum-base on caps, some servers
sometimes don't send them.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_finalize),
(gst_rtspsrc_stream_free), (request_pt_map),
(gst_rtspsrc_stream_configure_transport), (gst_rtspsrc_open):
* gst/rtsp/gstrtspsrc.h:
Parse server address from SDP.
Hook up a udpsink to send RTCP back to the server.
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* gst/rtsp/rtsptransport.h:
Add some docs.
Original commit message from CVS:
* gst/rtsp/gstrtpdec.c: (gst_rtp_dec_marshal_BOXED__UINT_UINT),
(gst_rtp_dec_class_init), (gst_rtp_dec_chain_rtp):
* gst/rtsp/gstrtpdec.h:
Make backward compat with rtpbin by adding the request-pt-map signals.
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_create_stream),
(new_session_pad), (request_pt_map),
(gst_rtspsrc_stream_configure_transport),
(gst_rtspsrc_stream_configure_caps),
(gst_rtspsrc_activate_streams):
* gst/rtsp/gstrtspsrc.h:
Implement request-pt-map signals instead of setting caps on the buffers
for the session manager.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (find_stream_by_setup),
(gst_rtspsrc_create_stream), (gst_rtspsrc_stream_free),
(get_default_rate_for_pt), (gst_rtspsrc_parse_rtpmap),
(gst_rtspsrc_media_to_caps),
(gst_rtspsrc_stream_configure_transport),
(gst_rtspsrc_stream_configure_caps),
(gst_rtspsrc_activate_streams), (gst_rtspsrc_parse_rtpinfo):
* gst/rtsp/gstrtspsrc.h:
Handle default clock-rates for static payload types, rearrange stuff so
that the rtpmap field in the sdp can override the defaults.
Parse RTP-Info field to get the seqnum and timebase fields that should
go in the caps.
Delay configuring caps after we got the RTP-Info from the PLAY reply from
the server.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (pad_blocked),
(gst_rtspsrc_stream_configure_transport),
(gst_rtspsrc_activate_streams), (gst_rtspsrc_loop_udp):
* gst/rtsp/gstrtspsrc.h:
Only unblock the udp pads when we linked and activated them all.
Fixes#395688.
