Previously, we would create a new GstMemory per write operation
and then append them to the GstBuffer. This would cause a reallocation
every 16 Memories which is an issue since the png encoder will usually
do write in a pattern of 4, 8 and 8k bytes repeating until the frame
is done.
Instead allocate a single GstMemory and keep writting it into it
with a manual index. Much like the jpegenc does.
Doing some basic testing With a testsrc snow pattern at 4k and 8k
the same pipeline would take ~3.30s to encode a 4k frame and ~23s
for an 8k. At 4k 0.70s/33% is taken by memory allocations, while at
8k its ~10.5s/45%.
With this patch, at 4k the pipeline takes ~2.40s and at 8k only 9.60s
making this 28% and 58% faster accordingly on my laptop, and
allocation runtime is dropped to subsecond times.
Here's the test pipeline used, increase num-buffers in image freeze
to gather more samples.
```
gst-launch-1.0 videotestsrc num-buffers=1 pattern=snow ! imagefreeze num-buffers=1 ! \
video/x-raw,width=7680,height=4320 ! pngenc ! fakesink
```
Close#2717
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4944>
With libsoup 2.x, it was possible to know when there was a TLS failure, as
libsoup provided the "special http status code" SOUP_STATUS_SSL_FAILED.
However these special codes were dropped with libsoup 3.x: now libsoup emits
the accept-certificate signal when there's a TLS failure.
This commit adds a signal "accept-certificate" to SoupHttpSrc, which is in fact
just about forwarding the signal from SoupMessage (which is, itself, forwarded
from GTlsConnection). Note that, in case of libsoup 2.x, the signal is never
emitted.
Fixes: #2379
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4925>
Is a seek is done on stream-collection post, there are no selected streams
yet. Therefore none would be chosen to adjust the key-unit seek.
If no streams are selected, fallback to a default stream (i.e. one which has
track(s) with GST_STREAM_FLAG_SELECT).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3914>
When seeking is handled by the collection posting thread, there is a possibility
that some leftover data will be pushed by the stream thread.
Properly detect and reject those early segments (and buffers) by comparing it to
the main segment seqnum
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3914>
Due to the alpha value being inserted with _BEFORE, we were ending up
with ARGB instead of RGBA, thus displaying completely wrong colours.
According to libpng's manual, "to add an opaque alpha channel, use filler=0xff
or 0xffff and PNG_FILLER_AFTER which will generate RGBA pixels".
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4756>
There are broken(?) mjpeg videos that are incorrectly detected as
interlaced. This happens because 'info.height > height' (e.g. 1088 > 1080).
In the interlaced case info.height is approximately 'height * 2' but not
exactly because height is a multiple of DCTSIZE. Make the check more
restrictive but take the rounding effect into account.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4696>
For interlaced jpeg, gst_jpeg_dec_decode_direct() is called twice, once for each
field. In this case, stride[n] is plane_stride[n] * 2 to ensure that only every
other line is written. So the loop must stop at height / num_fields.
If the frame is really interlaced then continuing beyound this, is not harmful,
because jpeg_read_raw_data() will do nothing and return 0, so am info message is
printed.
However, if the frame is not actually interlaced, just misdetected as interlaced
then there is still data available from the second half of the frame. Now
line[0][j] is set to the scratch buffer. If the scratch buffer is not allocated
(because the height is a multiple of v_samp[0] * DCTSIZE) then the result is a
segfault due to a null-pointer dereference.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4696>
Assigning TRUE (1) to a signed 1 bit integer will cause truncation
from 1 to -1 because the only non-zero value that can be stored is -1
due to how two's-complement works.
As this is a proper GObject let's not bother with all this and simply
use a normal gboolean instead.
../subprojects/gst-plugins-good/ext/pulse/pulsesink.c:1490:19: warning: implicit truncation from 'int' to a one-bit
wide bit-field changes value from 1 to -1 [-Wsingle-bit-bitfield-constant-conversion]
pbuf->in_commit = TRUE;
^ ~~~~
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4617>
The qt5 and qt6 plugins will now correctly error out if you enable the
option, and you can also now explicitly ensure that wayland, x11,
eglfs support is actually functional by enabling the options. It was
too easy to build non-functional support for these.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4537>
jackaudiosink and jackaudiosrc have a rank and might be plugged
as part of auto-plugging inside playbin and playsink or the
autoaudiosink/autoaudiosrc elements, so we don't really want to
spew ERROR log messages in that case, which is consistent with
what alsasink and pulseaudiosink do.
This is less noticable on Linux because pulseaudiosink has a
higher and alsasink which has the same rank comes before jack
in the alphabet.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4545>
In order to provide build and provide the jack plugin with the prebuilt
binaries of gstreamer we distribute with releases, we can not depend
on an external dependency nor can we ship plugins linking to libraries
we don't provide.
We can also not provide jack ourselves, as it would likely cause a
mismatch with the jack daemon on the host.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4350>
Short-circuit parsing and recreating the playlist URI if
no HLS directives are going to be applied to it.
Fixes problems playing some streams (YouTube) that have
unneeded escaped characters in the URI and then complain
when GStreamer removes the escaping
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4335>
There's no guarantee it will *actually* be the URI which refered to what we are
downloading. It could be a stream URI or anything else.
Instead of putting something wrong, put no (specific) referer as a better choice
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3972>
Makes "start-bitrate" work without setting "connection-speed" property. Having
another property set as a requirement for this one to work is unexpected.
This commit allows to request some initial bitrate for first segment, then
go into adaptive streaming for the rest of media playback.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3895>
The live playlists should be updated at a defined interval. The problem is that
this interval was used *after* the playlist was finally received and processed,
which resulted in a gradual shift happening in playlist updates.
Instead store and use the time at which playlists were requested to determine
when the next one should be downloaded.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
The scanning is done in a reverse order, the proper full checks to do are
therefore:
* If the position is beyond half a "segment duration", it's in the following
segment
* If the position is within the first half of a segment, it's in that one
* If the segment is the first one and the position is within half a duration
backwards, we consider the position as being within that first segment
Also handle the case where a "partial only" segment doesn't have a reliable
duration, and therefore use the playlist target duration instead.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
The implementation wouldn't work with regular HLS streams (i.e. the final
fallback).
Now that the implementation uses time to search for the starting
segment (instead of just the n-th from the end), we can specify the correct
hold_back fallback value from the RFC
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
Avoid a deadlock if a downstream seeking query happens while the scheduler
thread is holding the manifest lock (for example during a seek back to live).
Instead, do a more elaborate fix where the external calls that need access to a
'manifest' access a copy that's updated during a manually triggered manifest
update callback.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
Rename track_dequeue_data_locked() to
gst_adaptive_demux_track_dequeue_data_locked(), since it's non-static.
Make find_stream_for_track_locked() static since it's only used in the main
gstadaptivedemux.c file.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
gst_adaptive_demux2_stream_finish_download() will already schedule another
fragment download if it can so don't fall through to the retry code that will
also try and schedule a download (triggering an assert).
Fix the logic in general to retry advancing into the live seek range once.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
When calculating the seek range for a live stream, use the same hold-back logic
as when choosing a starting segment, including low-latency segments if
enabled. Permits seeking closer to the live edge when re-synching or catching
up.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
When playing at the live edge of a live playlist, and a download fails, we don't
expect there to be a next fragment. That case is handled lower down anyway, so
don't retry infinitely on spurious http errors at the live edge.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
gst_hls_demux_stream_has_next_fragment() can be called with a NULL
current_segment if we're past the end of the current playlist. In that case,
just return FALSE instead of hitting a critical in the playlist code.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
When playing LL-HLS playlists in LL-HLS mode, update the playlist more often (on
the partial segment interval) or else we end up downloading them in bursts and
playing further from the live edge than intended.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
When playing a live stream, make the recommended buffering threshold at most the
hold-back distance from live. If we start 3 seconds from the live edge, there's
no point trying to buffer more - we'll just hit the live edge and have to wait
for more data to be available anyway.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
Add a field to the DownloadRequest that reports the most recent time at which
data arrived. Update it in the DownloadHelper.
Add a method to retrieve the GST_BUFFER_OFFSET() for the DownloadRequest's data
buffer (if any).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
