Now we can configure how much time to wait before deciding that a
discont has happened.
Also, adds getter and setter to allow derived implementations to set
this value upon construction.
Suggestions and several improvements by Havard Graff.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
A common problem for audio-playback is that the timestamps might not
be completely linear. This is specially common when doing streaming over
a network, where you can have jittery and/or bursty packettransmission,
which again will often be reflected on the buffertimestamps.
Now, the current implementation have a threshold that says how far the
buffertimestamp is allowed o drift from the ideal aligned time in the
ringbuffer. This was an instant reaction, and ment that if one buffer
arrived with a timestamp that would breach the drift-tolerance, a resync
would take place, and the result would be an audible gap for the
listener.
The annoying thing would be that in the case of a "timestamp-outlier",
you would first resync one way, say +100ms, and then, if the next
timestamp was "back on track", you would end up resyncing the other way
(-100ms) So in fact, when you had only one buffer with slightly off
timestamping, you would end up with *two* audible gaps. This is the
problem this patch addresses.
The way to "fix" this problem with the previous implementation, would
have been to increase the "drift-tolerance" to a value that was greater
than the largest timestamp-outlier one would normally expect. The big
problem with this approach, however, is that it will allow normal
operations with a huge offset timestamp vs running-time, which is
detrimental to lip-sync. If the drift-tolerance is set to 200ms, it
basically means that lip-sync can easily end up being off by that much.
This patch will basically start a timer when the first breach of
drift-tolerance is detected. If any following timestamp for the next n
nanoseconds gets "back on track" within the threshold, it has basically
eliminated the effect of an outlier, and the timer is stopped. If,
however, all timestamps within this time-limit are breaching the
threshold, we are probably facing a more permanent offset in the
timestamps, and a resync is allowed to happen.
So basically this patch offers something as rare as both higher
accuracy, it terms of allowing smaller drift-tolerances, as well as much
smoother, less glitchy playback!
Commit message and improvments by Havard Graff.
Fixes bug #640859.
This reverts commit 11e375486e.
GST_BOILERPLATE() can't define an abstract type and
G_DEFINE_ABSTRACT_TYPE() does not pass the class struct to
the instance_init function and there's no way to get the
class struct of the current type in instance_init().
The /*< ... >*/ style is only used for public|protected|private,
signal comments use /* signals */. This prevents the some code
parsers/binding generators to be confused by the comment.
Leaving the GST_USE_UNSTABLE_API guards in until some of the
ported decoders have been updated and it's clear that I didn't
mess up anywhere porting things to the new audio API.
Adds little beyond baseaudiocodec (seeking, bit of query), and what it adds
is mainly out-of-scope (e.g. decoder seeking, should be done by upstream
demuxer/parser) and/or based on non-prime example (mad).
Moved most of the code to GstBaseAudioCodec, GstBaseAudioDecode is
now really small, maybe we do not really need it (or its encoder
counterpart). Added more API for subclasses and documentation.
Otherwise, discoverer will generated an "inner" codec
where there can be a tranformation (eg, kate -> DVD SPU,
and various ->text/x-pango-markup).
https://bugzilla.gnome.org/show_bug.cgi?id=639055
Without the perfect timestamp machinery, the RTP timestamp can be
computed directly from the running time of a buffer, but the perfect
timestamp patch broke that assumption. This patch restores it by
having the first perfect timestamp be the running time of that buffer
and counting from there.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=654434
Unlike linux, OSX wakes up select with POLLOUT (instead of POLLERR) when
connect() is done async and the connection is refused. Therefore always check
for the socket error state using getsockopt (..., SO_ERROR, ...) after a
connection attempt.
In ID3 v2.3 compressed frames will have a 4-byte data length indicator
after the frame header to indicate the size of the decompressed data.
This integer is unlikely to be a sync-safe integer for v2.3 tags,
only in v2.4 it's sync-safe.
Reversing the unsynchronisation seems to work slightly differently
for ID3 v2.3 tags and v2.4 tags: v2.3 tags don't have syncsafe frame
sizes in the frame header, so the unsynchronisation is applied to
the whole frame data including all the frame headers. v2.4 frames
have sync-safe sizes, however, so the unsynchronisation only needs
to be applied to the actual frame data, and it seems that's what's
being done as well. So we need to undo the unsynchronisation on a
per-frame basis for v2.4 tags for things to work properly.
Fixes extraction of coverart/images from APIC frames in ID3 v2.4
tags (#588148).
Add unit test for this as well.
We didn't handle unsynchronization at all up to now, which might have
caused frames to not be extracted - esp. frames after an APIC picture
frame. Fixes#577468.
Original commit message from CVS:
* ext/flac/gstflacdec.c: (gst_flac_extract_picture_buffer):
* gst-libs/gst/tag/id3v2frames.c: (parse_picture_frame):
Use new utility functions in libgsttag to process coverart (#512333).
Original commit message from CVS:
* ext/flac/gstflacdec.c: (gst_flac_extract_picture_buffer):
* gst-libs/gst/tag/id3v2frames.c: (parse_picture_frame):
Generate the image-type values correctly. Leave them out of the caps
when outputting a "preview image" tag, since it only makes sense
to have one of those - the type is irrelevant.
* sys/sunaudio/gstsunaudiomixerctrl.c:
(gst_sunaudiomixer_ctrl_open):
If we can, mark the mixer multiple open when we use it, in case
(for some reason) the process wants to open it again elsewhere.
Original commit message from CVS:
Based on patch by: Tommi Myöhänen <ext-tommi.myohanen nokia com>
* gst-libs/gst/tag/id3v2frames.c: (parse_comment_frame):
Make sure the ISO 639-X language code in ID3v2 COMM frames
is actually valid UTF-8 (or rather: ASCII), so we don't end
up with non-UTF8 strings in tags if there's garbage in the
language field. Also make sure the language code is always
lower case. Fixes: #508291.
Original commit message from CVS:
* tag: id3v2: (parse_url_link_frame):
Parse WOAF frames and put the result into GST_TAG_CONTACT,
which is where it would end up if the same information was
put in a vorbis comment (don't think it's worth adding a
new URI tag for this). Fixes#488112.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2.c:
* gst-libs/gst/tag/id3v2.h:
* gst-libs/gst/tag/id3v2frames.c: (id3v2_tag_to_taglist):
We don't want the same string multiple times in a tag list for the
same tag ever, for any tag, not just for GST_TAG_GENRE, so make sure
this doesn't happen and remove special-case code for GST_TAG_GENRE.
Original commit message from CVS:
Based on patch by: Jason Kivlighn <jkivlighn gmail com>
* gst-libs/gst/tag/id3v2frames.c:
Extract license/copyright URIs from ID3v2 WCOP frames
(Fixes#447000).
* tests/check/elements/id3demux.c:
* tests/files/Makefile.am:
* tests/files/id3-447000-wcop.tag:
Add simple unit test.
Original commit message from CVS:
* gst-libs/gst/tag/gstid3demux.c:
* gst-libs/gst/tag/gstid3demux.h:
* gst-libs/gst/tag/id3v2.c:
* gst-libs/gst/tag/id3v2.h:
* gst-libs/gst/tag/id3v2frames.c:
Port ID3 tag demuxer over to the new GstTagDemux in -base
(now would be a good time to test re-importing your music
collection).
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (parse_picture_frame):
Fix parsing of ID3 v2.2.0 PIC frames. Only in version >= 2.3.0 is
the image format a variable-length NUL-terminated string; in
versions before that the image format is a fixed-length string of
3 characters (see #348644 for a sample tag).
Also make supplied mime type lower-case and fix up 'jpg' to 'jpeg'.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2.c: (id3demux_id3v2_frames_to_tag_list):
* gst-libs/gst/tag/id3v2.h:
* gst-libs/gst/tag/id3v2frames.c: (id3demux_id3v2_parse_frame),
(parse_obsolete_tdat_frame):
Do not convert obsolete TDA/TDAT frames to TDRC frames, otherwise
the four-digit number will be interpreted as a year, whereas it is
month and day in DDMM format. Instead, parse TDAT frames and fix up
the date in the GST_TAG_DATE tag later if we also extracted a year.
Fixes#407349.
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (id3demux_id3v2_parse_frame):
Make sure that g_free always gets called on the same pointer that was
returned by g_malloc. Fixes#376594.
Do not leak memory if decompressed size is wrong.
Remove unneeded check of return value of g_malloc.
Patch by: René Stadler <mail@renestadler.de>
Original commit message from CVS:
* gst-libs/gst/tag/id3v2frames.c: (parse_picture_frame):
We require a -base more recent than 0.10.9, so it's safe to use
GST_TYPE_TAG_IMAGE_TYPE unconditionally now.
* ext/dv/gstdvdec.c: (gst_dvdec_sink_event):
* ext/jpeg/gstjpegdec.c: (gst_jpeg_dec_sink_event):
Use _newsegment_full() now that we depend on a recent enough core.
* gst/wavparse/gstwavparse.c:
Remove cruft that we don't need any longer now that we depend on
a recent enough -base.
