Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_negotiate_format):
Last change introduced a regression that made mpeg2dec handle
some 4:2:2 videos as 4:4:4. Fixes bug #562086.
Original commit message from CVS:
Patch by: Simon Holm Thøgersen <odie at cs dot aau dot dk>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_chain):
Add support for the STATE_SEQUENCE_MODIFIED state in mpeg2dec
>= 0.5.0. Fixes bug #562065.
Original commit message from CVS:
Patch by: Robin Stocker <robin at nibor dot org>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_init),
(handle_sequence), (gst_mpeg2dec_setcaps):
* ext/mpeg2dec/gstmpeg2dec.h:
Prefer the container's PAR over the stream's PAR if it's
given in the srcpad caps. Fixes bug #556184.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (handle_sequence):
Don't allow width/height outside the spec (i.e. smaller than 16
and higher than 4096). Such files are corrupted ones and setting
caps that are not a subset of the template caps confuses playbin.
Fixes bug #542646.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c:
Reset decoder when handling sequence where libmpeg2 has set
frame period to 0, probably due to a corrupt packet.
Fixes bug #514297
Original commit message from CVS:
* configure.ac:
* ext/mpeg2dec/gstmpeg2dec.c: (crop_buffer):
* gst/asfdemux/gstasfdemux.c: (gst_asf_demux_descramble_buffer):
* gst/dvdlpcmdec/gstdvdlpcmdec.c: (gst_dvdlpcmdec_chain_raw):
Fix build against core CVS by not using deprecated API. Bump
requirements for new API (overdue anyway).
Original commit message from CVS:
Patch by: Zaheer Abbas Merali <zaheermerali at gmail com>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_chain):
Never post a (fatal) error message on the bus on decoding errors. We
should only do this if we can't recover, but mpeg2dec can always
recover. This is needed for DVB streams, for example, where there
may be temporary glitches in the stream. Instead of an error
message, post a warning message on the bus for every N decoding
errors. Fixes#370020.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo@circular-chaos.org>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_init),
(gst_mpeg2dec_reset), (gst_mpeg2dec_alloc_sized_buf),
(gst_mpeg2dec_alloc_buffer), (init_dummybuf), (handle_slice):
* ext/mpeg2dec/gstmpeg2dec.h:
Align buffers to a 16 byte boundary so the altivec optimisations
don't crash. Fixes#327350.
Original commit message from CVS:
Patch by: Jan Arne Petersen <jpetersen at jpetersen dot org>
* ext/mpeg2dec/gstmpeg2dec.c: (handle_sequence), (handle_slice):
Simplify the framerate code and support more framerates. Fixes#361584.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo@circular-chaos.org>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_init):
Fix minor memleak when creating pads from static pad templates (#369627).
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/mpeg2dec.c: (setup_mpeg2dec),
(cleanup_mpeg2dec), (GST_START_TEST), (mpeg2dec_suite), (main):
Add unit tests for mpeg2dec (#369627).
Original commit message from CVS:
Patch by: Sebastian Droege <slomo at ubuntu dot com>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_finalize),
(gst_mpeg2dec_alloc_buffer), (init_dummybuf), (handle_slice):
* ext/mpeg2dec/gstmpeg2dec.h:
libmpeg2 requires its output buffers to start at a 16byte aligned
address or the altivec optimizations will explode.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (handle_slice):
* ext/mpeg2dec/gstmpeg2dec.h:
Add some debugging to timestamp handling.
Make sure we don't convert invalid timestamps.
Original commit message from CVS:
Patch by: Yves Lefebvre <ivanohe at abacom dot com>
* ext/mpeg2dec/gstmpeg2dec.c: (init_dummybuf):
Fix initialisation dummy buffer, the offsets are relative to the start
of the buffers. Fixes#356004.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_negotiate_format):
Assume pixel-aspect-ratio of 4:3 if libmpeg2dec doesn't give us
any PAR whatsoever (rather than using 0/0, which will lead to
an abort later on). Fixes#345184.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_finalize),
(gst_mpeg2dec_reset), (clear_buffers), (handle_picture),
(gst_mpeg2dec_sink_convert), (gst_mpeg2dec_src_convert),
(gst_mpeg2dec_change_state):
* ext/mpeg2dec/gstmpeg2dec.h:
Simplify and don't leak our buffer pool.
Use _scale_int.
Remove unfixed bug number from previous ChangeLog entry.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_base_init),
(gst_mpeg2dec_class_init), (gst_mpeg2dec_init),
(gst_mpeg2dec_finalize), (gst_mpeg2dec_reset),
(gst_mpeg2dec_qos_reset), (gst_mpeg2dec_alloc_buffer),
(gst_mpeg2dec_negotiate_format), (init_dummybuf),
(handle_sequence), (handle_picture), (handle_slice),
(gst_mpeg2dec_chain), (gst_mpeg2dec_sink_event),
(gst_mpeg2dec_src_event), (gst_mpeg2dec_change_state):
* ext/mpeg2dec/gstmpeg2dec.h:
Fix padtemplate as we can now do fractional framerates.
Small cleanups.
Use GstSegment.
Add simple frame dropping QoS.
Precalc buffer output sizes and UV offsets.
Always give libmpeg2 a valid fbuf when it wants one.
don't trust libmpeg to discard our buffers but manage it
ourselves.
Fixes#343627, #327350, #335288
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_sink_convert),
(gst_mpeg2dec_src_query):
Remember the query duration format before passing it upstream since it
could have been modified.
Add GST_WARNING_OBJECT in sink convert function to detail why the
conversion didn't work.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_alloc_sized_buf),
(gst_mpeg2dec_alloc_buffer):
Can't use gst_pad_alloc_buffer*() when we are going to crop
the image before sending it out. Downstream basetransform-based
elements will complain about the wrong unit size otherwise
(when not operating in passthrough-mode at least).
Const-ify some static variables and do some minor clean-ups.
Use I420 macros for size/offsets (not really necessary in this
particular context, but this kind of code gets copy'n'pasted).
Original commit message from CVS:
Reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_init),
(gst_mpeg2dec_reset), (gst_mpeg2dec_chain):
* ext/mpeg2dec/gstmpeg2dec.h:
Don't treat STATE_INVALID as fatal error; throw an error
only after five consecutive decoding errors. Makes decoding
mpeg streams more robust and fixes playback of joined clips
(#300682).
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (crop_copy_i420_buffer),
(crop_copy_i422_buffer), (crop_buffer):
When we need to crop the output buffer, make sure we
create a buffer of the right size and respect the implicit
striding used for I420 elsewhere in GStreamer (#331301).
Original commit message from CVS:
* ext/amrnb/amrnbdec.c: (gst_amrnbdec_setcaps),
(gst_amrnbdec_chain), (gst_amrnbdec_state_change):
Some more comments.
* ext/mpeg2dec/gstmpeg2dec.c: (crop_buffer), (handle_slice):
Applied patch from Fabrizio Gennari, fixes#330844.
Original commit message from CVS:
* ext/amrnb/amrnbparse.c: (gst_amrnbparse_query):
* ext/mad/gstid3tag.c: (gst_id3_tag_src_query):
* ext/mad/gstmad.c: (gst_mad_src_query):
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_src_query):
* ext/sidplay/gstsiddec.cc:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_handle_src_query):
* gst/realmedia/rmdemux.c: (gst_rmdemux_src_query):
Pass unhandled queries upstream (useful e.g. for SEEKING query)
(fixes#325652; based on patch by: Philippe); make rmdemux return
FALSE for position queries, instead of setting -1 as value and
returning TRUE.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_src_event):
When getting a seek event, first check if the upstream element
can handle it and only do our own seek stuff when it can't
(should fix#322856).
Original commit message from CVS:
Reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* ext/mpeg2dec/gstmpeg2dec.c: (normal_seek):
Really convert to BYTES format when we want to convert
to bytes (use right variable; fixes#322856).
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (handle_sequence):
Prime libmpeg2's pumps with some null custom buffers
to ensure it ask us to discard garbage later yay.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (handle_slice),
(gst_mpeg2dec_sink_event):
Set DELTA_UNIT flag on outgoing buffers if this is NOT a keyframe;
nice-ify debug message in event handler; add CHECKME.
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_process_event),
(gst_dvd_demux_send_event), (gst_dvd_demux_process_private),
(gst_dvd_demux_send_subbuffer), (gst_dvd_demux_reset),
(gst_dvd_demux_sync_stream_to_time):
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_class_init),
(gst_mpeg_demux_process_event), (gst_mpeg_demux_send_event),
(gst_mpeg_demux_handle_discont), (gst_mpeg_demux_new_output_pad),
(gst_mpeg_demux_parse_packet), (gst_mpeg_demux_parse_pes),
(gst_mpeg_demux_send_subbuffer), (gst_mpeg_demux_process_private),
(gst_mpeg_demux_sync_stream_to_time),
(gst_mpeg_demux_handle_src_event), (gst_mpeg_demux_reset):
* gst/mpegstream/gstmpegdemux.h:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_init),
(gst_mpeg_parse_handle_discont), (gst_mpeg_parse_send_buffer),
(gst_mpeg_parse_process_event), (gst_mpeg_parse_send_discont),
(gst_mpeg_parse_send_event), (gst_mpeg_parse_event),
(gst_mpeg_parse_chain):
* gst/mpegstream/gstmpegparse.h:
Get rid of GST_PAD_IS_USABLE and fix GstFlowReturn vs. gboolean
return value confusion (gst_pad_push vs. gst_pad_send_event and
gst_pad_push_event); pass flow return values to caller;
miscellaneous fixes and clean-ups.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_negotiate_format),
(handle_sequence), (handle_slice), (gst_mpeg2dec_chain),
(gst_mpeg2dec_src_query), (gst_mpeg2dec_change_state):
Small cleanups in refcounting.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_open_decoder),
(gst_mpeg2dec_reset), (free_all_buffers),
(gst_mpeg2dec_alloc_buffer), (handle_sequence):
* ext/mpeg2dec/gstmpeg2dec.h:
The libmpeg2 user-allocated buffer management is awkward,
to say the least. Hopefully this fixes things.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_init),
(gst_mpeg2dec_close_decoder), (put_buffer), (check_buffer),
(free_buffer), (free_all_buffers), (gst_mpeg2dec_alloc_buffer),
(handle_sequence), (handle_picture):
* ext/mpeg2dec/gstmpeg2dec.h:
Rearrange buffer tracking and refcounting and refactor
a little for readability.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c:
Don't send things to NULL PAD_PEERs
* gst/deinterlace/gstdeinterlace.c: (gst_deinterlace_chain):
Copy-on-write the incoming buffer.
* gst/mpegstream/gstdvddemux.h:
* gst/mpegstream/gstmpegclock.h:
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_parse_syshead),
(normal_seek), (gst_mpeg_demux_handle_src_event):
* gst/mpegstream/gstmpegdemux.h:
* gst/mpegstream/gstmpegpacketize.h:
* gst/mpegstream/gstmpegparse.c:
(gst_mpeg_parse_update_streaminfo), (gst_mpeg_parse_reset),
(gst_mpeg_parse_handle_discont), (gst_mpeg_parse_parse_packhead),
(gst_mpeg_parse_loop), (gst_mpeg_parse_get_rate),
(gst_mpeg_parse_convert_src), (gst_mpeg_parse_handle_src_query),
(gst_mpeg_parse_handle_src_event), (gst_mpeg_parse_change_state):
* gst/mpegstream/gstmpegparse.h:
* gst/mpegstream/gstrfc2250enc.h:
Various changes to the way time is computed that make seeking and
total time estimation much better here.
Use G_BEGIN/END_DECLS instead of __cplusplus
* gst/videocrop/gstvideocrop.c: (gst_video_crop_chain):
Use gst_buffer_stamp instead of only copying the TIMESTAMP
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (gst_a52dec_push),
(gst_a52dec_handle_event), (gst_a52dec_chain):
Add some debug output. Check that a discont has a valid
time associated.
* ext/alsa/gstalsasink.c: (gst_alsa_sink_check_event),
(gst_alsa_sink_loop):
Ignore TAG events. A little extra debug for broken timestamps.
* ext/dvdnav/dvdnavsrc.c: (dvdnavsrc_init), (dvdnavsrc_loop),
(dvdnavsrc_change_state):
Ensure we send a discont to engage the link before we send any
other events.
* ext/dvdread/dvdreadsrc.c: (dvdreadsrc_init),
(dvdreadsrc_finalize), (_close), (_open), (_seek_title),
(_seek_chapter), (seek_sector), (dvdreadsrc_get),
(dvdreadsrc_uri_get_uri), (dvdreadsrc_uri_set_uri):
Handle URI of the form dvd://title[,chapter[,angle]]. Currently only
dvd://title works in totem because typefinding sends a seek that ends
up going back to chapter 1 regardless.
* ext/mpeg2dec/gstmpeg2dec.c:
* ext/mpeg2dec/gstmpeg2dec.h:
Output correct timestamps and handle disconts.
* ext/ogg/gstoggdemux.c: (get_relative):
Small guard against a null dereference.
* ext/pango/gsttextoverlay.c: (gst_textoverlay_finalize),
(gst_textoverlay_set_property):
Free memory when done. Don't call gst_event_filler_get_duration on
EOS events. Use GST_LOG and GST_WARNING instead of g_message and
g_warning.
* ext/smoothwave/gstsmoothwave.c: (gst_smoothwave_init),
(draw_line), (gst_smoothwave_dispose), (gst_sw_sinklink),
(gst_sw_srclink), (gst_smoothwave_chain):
Draw solid lines, prettier colours.
* gst/mpeg2sub/gstmpeg2subt.c: (gst_mpeg2subt_init):
Add a default palette that'll work for some movies.
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_init),
(gst_dvd_demux_handle_dvd_event), (gst_dvd_demux_send_discont),
(gst_dvd_demux_send_subbuffer), (gst_dvd_demux_reset):
* gst/mpegstream/gstdvddemux.h:
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_send_discont),
(gst_mpeg_demux_parse_syshead), (gst_mpeg_demux_parse_pes):
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_init),
(gst_mpeg_parse_handle_discont), (gst_mpeg_parse_parse_packhead):
* gst/mpegstream/gstmpegparse.h:
Use PTM/NAV events when for timestamp adjustment when connected to
dvdnavsrc. Don't use many discont events where one suffices.
* gst/playback/gstplaybasebin.c: (group_destroy),
(gen_preroll_element), (gst_play_base_bin_add_element):
* gst/playback/gstplaybasebin.h:
Make sure we remove subtitles from the same bin we put them in.
* gst/subparse/gstsubparse.c: (convert_encoding), (parse_subrip),
(gst_subparse_buffer_format_autodetect),
(gst_subparse_change_state):
Fix some memleaks and invalid accesses.
* gst/typefind/gsttypefindfunctions.c: (ogganx_type_find),
(oggskel_type_find), (cmml_type_find), (plugin_init):
Some typefind functions for Annodex v3.0 files
* gst/wavparse/gstwavparse.h:
GstRiffReadClass is the correct parent class.
Original commit message from CVS:
Reviewed by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* ext/mpeg2dec/gstmpeg2dec.c: (crop_buffer),
(gst_mpeg2dec_alloc_buffer):
* ext/mpeg2dec/gstmpeg2dec.h:
Crop if decoding size is not the actual image size (#163676).
Original commit message from CVS:
second batch :
remove ',' at end of enums as they could confuse older gcc, foreign compilers (forte) and gtk-doc
(in gst-plugins/ext/ this time)
Original commit message from CVS:
* ext/dv/gstdvdec.c: (gst_dvdec_video_link):
Fix caps nego and pad templates. RGB mode caps should
work now.
* ext/dvdnav/gst-dvd:
Move mpeg2dec inside the thread because otherwise the
queue rejects cap changes mid-stream
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_get_type),
(gst_mpeg2dec_flush_decoder):
For mpeg2dec > 0.4.0, call the flush function instead of
manually extracting all in-flight frames.
* ext/raw1394/gstdv1394src.c: (gst_dv1394src_factory),
(gst_dv1394src_init), (gst_dv1394src_iso_receive):
Change mime type video/dv go video/x-dv to match the
rest of gst-plugins
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (src_templ),
(gst_mpeg2dec_base_init), (gst_mpeg2dec_init),
(gst_mpeg2dec_negotiate_format):
* ext/mpeg2dec/gstmpeg2dec.h:
removed the static pad template so that we can add the
more accurate framerate value to the caps.
Original commit message from CVS:
a52dec: Use a debug category, Output timestamps correctly
Emit tag info, Handle events, tell liba52dec about cpu
capabilities so it can use MMX etc.
dvdec: Fix a crasher accessing invalid memory
dvdnavsrc:Some support for byte-format seeking.
Small fixes for still frames and menu button overlays
mpeg2dec: Use a debug category. Adjust the report level of several items to
LOG. Call mpeg2_custom_fbuf to mark our buffers as 'custom buffers'
so it doesn't lose the GstBuffer pointer
navseek: Add the navseek debug element for seeking back and forth in a
video stream using arrow keys.
mpeg2subt:Pretty much a complete rewrite. Now a loopbased element. May still
require work to properly synchronise subtitle buffers.
mpegdemux:
dvddemux: Don't attempt to create subbuffers of size 0
Reduce a couple of error outputs to warnings.
y4mencode:Output the y4m frame header correctly
Original commit message from CVS:
* configure.ac: the Hermes library controls hermescolorspace, not
colorspace.
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_base_init),
(gst_mpeg2dec_init): minor pet peeve: disable code with #ifdef,
not /* */
* ext/sdl/sdlvideosink.c: Change XID to unsigned long.
* ext/sdl/sdlvideosink.h: ditto.
* gst/colorspace/gstcolorspace.c: Fix old comments about Hermes
Original commit message from CVS:
* ext/dv/gstdvdec.c: (gst_dvdec_loop):
Fix caps negotiation.
* ext/dvdnav/dvdnavsrc.c: (dvdnavsrc_class_init),
(dvdnavsrc_update_buttoninfo), (dvdnavsrc_get),
(dvdnavsrc_get_event_mask), (dvdnav_handle_navigation_event),
(dvdnavsrc_event):
* ext/mpeg2dec/gstmpeg2dec.c:
* gst-libs/gst/navigation/navigation.c:
(gst_navigation_send_key_event), (gst_navigation_send_mouse_event):
* gst-libs/gst/navigation/navigation.h:
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_handle_src_event):
* sys/ximage/ximagesink.c: (gst_ximagesink_handle_xevents):
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_handle_xevents):
Super-simple first version of mouse and keyboard events. Clicking
on a DVD menu now works, although it may not take you where you
expected.
* gst/sine/gstsinesrc.c: (gst_sinesrc_src_fixate):
* gst/videotestsrc/gstvideotestsrc.c:
(gst_videotestsrc_src_fixate):
These fixate functions were broken - they never actually
fixated :)
Original commit message from CVS:
2004-01-03 Ronald Bultje <rbultje@ronald.bitfreak.net>
* ext/mpeg2dec/gstmpeg2dec.c:
Add support for mpeg2dec-0.4.0 (released two weeks ago). See
#130416.
Original commit message from CVS:
Don't attempt to negotiate format if our srcpad isn't linked. Simply
succeed and continue. This is needed for pure indexer applications.
Original commit message from CVS:
New mimetypes gone into effect today - this commit changes all old mimetypes over to the new mimetypes spec as described in the previous commit's document. Note: some plugins will break, some pipelines will break, expect HEAD to be broken or at least not 100% working for a few days, but don't forget to report bugs
Original commit message from CVS:
compatibility fix for new GST_DEBUG stuff.
Includes fixes for missing includes for config.h and unistd.h
I only ensured for plugins I can build that they work, so if some of them are still broken, you gotta fix them yourselves unfortunately.
Original commit message from CVS:
- Fixed nasty bug that destroyed the decoder state when going to READY
- Moved indexing code around, added index lookup
Original commit message from CVS:
drop mpeg2dec 0.2.1 support in favor of 0.3.0.
keeping old code around in cvs for a while just in case someone needs it.
Original commit message from CVS:
add ranks only for plugins who participate in autoplugging. If you have a file that used to autoplug but doesn't anymore, then let me know or add a rank to the missing element.
Original commit message from CVS:
- Changed plugins for new APIs
- modularized audiofile.
- added seeking, query and convert functions for mad, mpeg2dec,
avidemux, mpegdemux, mpegparse
- sync updates to oss. removed the ossclock for now
Original commit message from CVS:
* a hack to work around intltool's brokenness
* a current check for mpeg2dec
* details->klass reorganizations
* an element browser that uses details->klass
* separated cdxa parse out from the avi directory
Original commit message from CVS:
* removal of //-style comments
* don't link plugins to core libs -- the versioning is done internally to the plugins with the plugin_info struct,
and symbol resolution is lazy, so we can always know if a plugin can be loaded by the plugin_info data. in theory.
