Original commit message from CVS:
* gst/xingheader/gstxingmux.c: (generate_xing_header):
Bitrate is 4 bits, not 8 so check for 0xe as maximum value instead
of 0xfe.
Original commit message from CVS:
* gst/xingheader/gstxingmux.c: (has_xing_header),
(generate_xing_header), (gst_xing_mux_chain),
(gst_xing_mux_sink_event):
Choose smallest possible frame size for the Xing header, properly
set the timestamp, duration and offset on the outgoing buffers,
only send NEWSEGMENT events in BYTE format downstream and also
drop VBRI headers if already existing.
Original commit message from CVS:
* gst/xingheader/Makefile.am:
* gst/xingheader/gstxingmux.c: (parse_header), (get_xing_offset),
(has_xing_header), (generate_xing_header),
(gst_xing_mux_base_init), (gst_xing_mux_finalize), (xing_reset),
(gst_xing_mux_init), (gst_xing_mux_chain),
(gst_xing_mux_sink_event), (gst_xing_mux_change_state):
* gst/xingheader/gstxingmux.h:
Major cleanup and rewrite of xingmux with less bugs and new features:
- Handles other layers as 3
- Write TOC
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_clock_rate):
If we find the caps in the cache, use it to parse the clock-rate instead
of returning an error. Fixes a TODO as found by Youness Alaoui.
Original commit message from CVS:
Patch by: Youness Alaoui <youness dot alaoui at collabora dot co dot uk>
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_clock_rate):
* gst/rtpmanager/rtpsession.c: (rtp_session_set_callbacks),
(rtp_session_set_process_rtp_callback),
(rtp_session_set_send_rtp_callback),
(rtp_session_set_send_rtcp_callback),
(rtp_session_set_sync_rtcp_callback),
(rtp_session_set_clock_rate_callback),
(rtp_session_set_reconsider_callback), (source_push_rtp),
(source_clock_rate), (rtp_session_process_bye),
(rtp_session_process_rtcp), (rtp_session_send_bye),
(rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Make it possible to use different user_data for each of the callbacks.
Fixes#508587.
Original commit message from CVS:
* gst/mpegvideoparse/mpegpacketiser.c: (mpeg_util_find_start_code):
Small meaningless cleanup.
* gst/mpegvideoparse/mpegvideoparse.c: (gst_mpegvideoparse_flush),
(mpegvideoparse_drain_avail), (gst_mpegvideoparse_chain_forward),
(scan_keyframe), (gst_mpegvideoparse_flush_decode),
(gst_mpegvideoparse_chain_reverse), (gst_mpegvideoparse_chain),
(mpv_parse_sink_event), (gst_mpegvideoparse_change_state):
* gst/mpegvideoparse/mpegvideoparse.h:
Track segment events.
Do the first part of reverse playback by sending data between two
I-frames to the decoder.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (create_send_rtp_sink):
Don't set fixed caps, we can basically do everything the upsteam peer
pad can renegotiate to. Fixes#507940.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Don't unref the popped buffer when we don't have ownership.
Fixes#507020.
Original commit message from CVS:
* ext/musicbrainz/gsttrm.c:
Don't emit signiture when going to READY, because it might
not be ready.
* ext/nas/nassink.c:
Remove useless call that sleeps for 5 seconds. Yup, it calls
sleep(1) 5 times. Go NAS.
* gst/librfb/gstrfbsrc.c:
* gst/librfb/rfbdecoder.c:
Initialize our debug categories properly.
* gst/rawparse/gstrawparse.c:
Don't register element details for a non-element. Be much more
rude when subclass doesn't set a pad template (assert!). Don't
unref the pad template; we don't own it.
* gst/videosignal/gstvideoanalyse.c:
Initialize debug category.
* tests/check/Makefile.am:
Ignore nassink element in tests because it has unavoidable
long timeouts.
Original commit message from CVS:
* ext/ladspa/gstladspa.c: (gst_ladspa_get_property):
* ext/sdl/sdlvideosink.c: (gst_sdlvideosink_show_frame):
* gst/mve/gstmvemux.c: (gst_mve_mux_request_new_pad):
* sys/dvb/dvbbasebin.c: (dvb_base_bin_class_init):
Fix 'xyz may be used uninitialized' compiler warnings caused
by broken g_assert_not_reached() macro in GLib-2.15.x and don't
abort() in any case but properly report the error.
Original commit message from CVS:
* gst/videoparse/Makefile.am:
* gst/videoparse/README:
* gst/videoparse/gstvideoparse.c:
Remove videoparse element, because it was moved to gst/rawparse/
Original commit message from CVS:
* gst/rawparse/gstrawparse.c: (gst_raw_parse_src_event):
Always seek on frame boundaries, will produce nothing useful
otherwise.
Original commit message from CVS:
* configure.ac:
* gst/rawparse/Makefile.am:
* gst/rawparse/README:
* gst/rawparse/gstaudioparse.c: (gst_audio_parse_format_get_type),
(gst_audio_parse_endianness_get_type), (gst_audio_parse_base_init),
(gst_audio_parse_class_init), (gst_audio_parse_init),
(gst_audio_parse_set_property), (gst_audio_parse_get_property),
(gst_audio_parse_update_frame_size), (gst_audio_parse_get_caps):
* gst/rawparse/gstaudioparse.h:
* gst/rawparse/gstrawparse.c: (gst_raw_parse_base_init),
(gst_raw_parse_class_init), (gst_raw_parse_init),
(gst_raw_parse_dispose),
(gst_raw_parse_class_set_src_pad_template),
(gst_raw_parse_class_set_multiple_frames_per_buffer),
(gst_raw_parse_reset), (gst_raw_parse_chain),
(gst_raw_parse_convert), (gst_raw_parse_sink_event),
(gst_raw_parse_src_event), (gst_raw_parse_src_query_type),
(gst_raw_parse_src_query), (gst_raw_parse_set_framesize),
(gst_raw_parse_set_fps), (gst_raw_parse_get_fps),
(gst_raw_parse_is_negotiated):
* gst/rawparse/gstrawparse.h:
* gst/rawparse/gstvideoparse.c: (gst_video_parse_format_get_type),
(gst_video_parse_endianness_get_type), (gst_video_parse_base_init),
(gst_video_parse_class_init), (gst_video_parse_init),
(gst_video_parse_set_property), (gst_video_parse_get_property),
(gst_video_parse_format_to_fourcc),
(gst_video_parse_update_frame_size), (gst_video_parse_get_caps):
* gst/rawparse/gstvideoparse.h:
* gst/rawparse/plugin.c: (plugin_init):
Add new plugin rawparse that contains a base class for raw data
parsers and the two elements audioparse and videoparse that can
be used to parse raw audio and video. These are inspired by the
old videoparse element which the new rawparse plugin deprecates.
Original commit message from CVS:
2007-12-18 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch-marshal.list:
* gst/switch/gstswitch.h (struct _GstStreamSelectorClass):
* gst/switch/gstswitch.c (enum, gst_selector_pad_class_init)
(gst_selector_pad_get_property)
(gst_selector_pad_get_running_time)
(gst_stream_selector_class_init, gst_segment_get_timestamp)
(gst_segment_set_stop, gst_segment_set_start)
(gst_stream_selector_set_active_pad, gst_stream_selector_block)
(gst_stream_selector_push_pending_stop)
(gst_stream_selector_switch): Change so that the signals and
properties deal in running time, not buffer time. Document the
signals more. Change uint64 in API to int64, to reflect what's in
GstSegment.
Original commit message from CVS:
* gst/multifile/gstmultifilesrc.c:
* gst/multifile/gstmultifilesrc.h:
When subsequent files are read, if the file doesn't exist, send
an EOS instead of causing an error.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.c (gst_selector_pad_chain): Return OK when
a buffer is ignored, not NOT_LINKED. No sense in making a source
element error out; at least fdsrc considers NOT_LINKED to be a
fatal error. Patch 11/12. There is no patch 12/12. Foo.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch-marshal.list:
* gst/switch/gstswitch.h (struct _GstStreamSelectorClass):
* gst/switch/gstswitch.c (gst_stream_selector_class_init)
(gst_stream_selector_block): Make the block() signal return the
last stop time of the active pad. Patch 10/12.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.c (gst_selector_pad_get_property)
(gst_selector_pad_class_init, gst_stream_selector_class_init)
(gst_stream_selector_get_property): Expose 'last-stop-time' as a
pad property, not an element property.
(gst_selector_pad_chain): Mark the last_stop time as timestamp +
duration, not timestamp. Patch 9/12.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.c (gst_stream_selector_change_state)
(gst_stream_selector_block, gst_stream_selector_switch): Use the
cond mechanism instead of blocked pads. Patch 8/12.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.h (struct _GstStreamSelector):
* gst/switch/gstswitch.c (gst_stream_selector_wait)
(gst_selector_pad_chain, gst_stream_selector_init)
(gst_stream_selector_dispose): Add infrastructure for new blocking
mechanism that does not use gst_pad_set_blocked, which does not
work on sink pads. Patch 7/12.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.h (struct _GstStreamSelector): Add some
state variables.
* gst/switch/gstswitch.c (gst_stream_selector_push_pending_stop)
(gst_selector_pad_chain): Push any pending stop event.
(gst_stream_selector_set_active_pad)
(gst_stream_selector_set_property): Factor out setting the active
pad to a function. Close the segment of the previous active pad if
told to do so via a stop_time != GST_CLOCK_TIME_NONE.
(gst_stream_selector_switch): Implement switch vmethod. Patch 5/12.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.c (gst_stream_selector_block): Implement
the block() signal. This implementation will be replaced in future
patches, however. Patch 4/12.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.h (struct _GstStreamSelectorClass):
* gst/switch/gstswitch.c (gst_stream_selector_class_init): Add
`block' and `switch' signals.
* gst/switch/Makefile.am:
* gst/switch/gstswitch-marshal.list: Add foo to generate a
marshaller for the `switch' signal. Patch 2/12.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.h:
* gst/switch/gstswitch.c: Replace with files from
gststreamselector.[ch], registered as the "switch" plugin, with
"GstSwitch" types. Patch 1/12.
Original commit message from CVS:
* gst/videoparse/gstvideoparse.c: (gst_video_parse_dispose),
(gst_video_parse_sink_event):
Free the adapter on dispose and correctly reset on newsegment events.
Original commit message from CVS:
* gst/videoparse/gstvideoparse.c: (gst_video_parse_sink_event),
(gst_video_parse_src_event), (gst_video_parse_src_query):
Improve duration query by first asking upstream and if it can't handle
the query try to get the duration in bytes from upstream and convert.
For seeks, try if upstream handles this already first and do our
conversion to byte format only if it doesn't and if we get a
newsegment event in time format keep it and only do our conversions
if the event has another format.
Original commit message from CVS:
* gst/videoparse/gstvideoparse.c:
(gst_video_parse_format_get_type),
(gst_video_parse_endianness_get_type),
(gst_video_parse_class_init), (gst_video_parse_init),
(gst_video_parse_set_property), (gst_video_parse_get_property),
(gst_video_parse_format_to_fourcc),
(gst_video_parse_update_block_size), (gst_video_parse_chain),
(gst_video_parse_sink_event):
Add support for video/x-raw-rgb and video/x-raw-gray. Also send
downstream elements downstream, not upstream.
Original commit message from CVS:
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtspacketizer.h:
Hash streams by pid again. Add a linked list inside each
stream with a list of sub_tables. Fix multiple sections
as it was borked with my last commit.
Original commit message from CVS:
* gst/videoparse/gstvideoparse.c: (gst_video_parse_init),
(gst_video_parse_src_event), (gst_video_parse_src_query_type):
Implement a query type function for the src pad, implement seeking
and use ANY caps for the sink pad as the element doesn't care what
caps the input has and everything is handled via properties.
Original commit message from CVS:
* gst/videoparse/gstvideoparse.c: (gst_video_parse_convert),
(gst_video_parse_sink_event):
Handle -1 values for the CONVERT query too.
Original commit message from CVS:
* gst/videoparse/gstvideoparse.c: (gst_video_parse_sink_event):
Add YV12 to the pad templates as it is supported too and allow
-1 as stop position for NEWSEGMENT events.
Original commit message from CVS:
* gst/videoparse/Makefile.am:
Add $(GST_PLUGINS_BASE_CFLAGS) to CFLAGS to fix the build.
* gst/videoparse/gstvideoparse.c: (gst_video_parse_init),
(gst_video_parse_set_property), (gst_video_parse_get_property):
Use g_value_[sg]et_enum() for enum properties, g_value_[sg]et_int()
gives a g_critical().
Original commit message from CVS:
* gst/videoparse/README:
* gst/videoparse/gstvideoparse.c:
Add a bunch of features: handle format specification, handle
queries and conversion. Works much like a normal parser now.
Original commit message from CVS:
* gst/rtpmanager/gstrtpptdemux.c: (gst_rtp_pt_demux_finalize),
(gst_rtp_pt_demux_setup), (gst_rtp_pt_demux_release),
(gst_rtp_pt_demux_change_state):
* gst/rtpmanager/gstrtpssrcdemux.c: (gst_rtp_ssrc_demux_reset),
(gst_rtp_ssrc_demux_dispose), (gst_rtp_ssrc_demux_src_query),
(gst_rtp_ssrc_demux_change_state):
Clean up the dynamic pads when going to READY.
Original commit message from CVS:
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video):
Don't strdup (and thus leak) codec name strings when passing
them to gst_tag_list_add().
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_class_init),
(gst_rtp_bin_handle_message):
* gst/rtpmanager/gstrtpsession.c: (source_get_sdes_structure),
(on_ssrc_sdes):
Post a message when the SDES infor changes for a source.
* gst/rtpmanager/rtpsession.c:
* gst/rtpmanager/rtpsource.c:
Update some comments.
Original commit message from CVS:
Based on patch by: <mutex at runbox dot com>
* gst/videoparse/gstvideoparse.c: (gst_video_parse_src_query):
Forward the query upstream, the default element event handler does
something different. Fixes#502879.
