Commit graph

6965 commits

Author SHA1 Message Date
Wim Taymans
b069db6a2e session: parse packet outside of the session lock 2013-07-26 12:17:56 +02:00
Wim Taymans
57c27ec319 session: do nicer checks for internal sources 2013-07-26 12:17:56 +02:00
Wim Taymans
93d07298ff session: let source keep track if it sent BYE 2013-07-26 12:17:56 +02:00
Wim Taymans
0c9c1434a8 source: reset more 2013-07-26 12:17:56 +02:00
Wim Taymans
1d02496d15 source: also use the source for bye_reason
Store the BYE reason in our internal source object. Rename the methods on the
source object a little because now the BYE can be received in RTCP or
set when the session wants to send BYE.
2013-07-26 12:17:56 +02:00
Wim Taymans
ddd071e54c session: configure sdes with structure only
Remove code to configure the SDES with methods and types, only
allow configuration with GstStructure
2013-07-26 12:17:55 +02:00
Wim Taymans
0060e1d45d session: refactor add and find source
Make functions to find and add a source to the hashtable.
2013-07-26 12:17:55 +02:00
Wim Taymans
adb0d68c07 session: remove source from sync_rtcp
We don't need to know the sender source of the session in the
callback, the SR packet is for all participants in the session.
2013-07-26 12:17:55 +02:00
Wim Taymans
bf7d8173b3 jitterbuffer: add some more debug 2013-07-26 12:17:55 +02:00
Vincent Penquerc'h
91d4abceaa aacparse: allow conversion from ADTS to raw AAC
Some muxers (eg, qtmux) only support raw AAC, so this allows linking
an encoder that outputs ADTS only to those muxers.

The conversion is simple (omit the first 7 or 9 bytes of the frame),
but has to be done in pre_push instead of handle_frame as 1.0 does
not seem to allow skipping bytes there as 0.10 used to.

Other conversions are not supported (yet).
2013-07-26 09:44:11 +01:00
Vincent Penquerc'h
55e9338846 aacparse: fix object_type parsing off-by-one in ADTS frame
According to http://wiki.multimedia.cx/index.php?title=ADTS,
the value stored in ADTS headers is one less than the object
type of the AAC stream.

A look at ffmpeg shows it also adds 1 to the value read off
the ADTS header.

Note that this might break other things that happen to have
an inverse off by one to match the existing code.
2013-07-26 09:44:10 +01:00
Thiago Santos
7eac4c7c03 avidemux: fix seqnum handling for seeks
Use the same seqnum as the seek for flushes/segments that are
caused by the seek. Also do the same for segment events

Fixes #676242
2013-07-25 15:24:31 -03:00
Thiago Santos
8bd12e12b3 matroskademux: fix seqnum handling for seeks
Use the same seqnum as the seek for flushes/segments that are
caused by the seek. Also do the same for segment events

Fixes #676242
2013-07-25 15:24:31 -03:00
Thiago Santos
e49b6e7c35 qtdemux: correctly handle seqnum for seeks and segments
Use the same seqnum on messages and events for derived events.
Fixed for flushes / stream-start / segment after a seek, and segment
after a segment.

Fixes #676242
2013-07-25 15:24:31 -03:00
Wim Taymans
c44a29bd53 bin: fix compilation 2013-07-24 14:17:45 +02:00
Wim Taymans
cc92ef1db2 vrawdepay: fix UYVP format 2013-07-24 12:42:31 +02:00
Wim Taymans
8191b6fcd2 vrawpay: fix UYVP format 2013-07-24 12:41:58 +02:00
Wim Taymans
37af93c361 vrawpay: fix caps 2013-07-24 12:41:44 +02:00
Wim Taymans
f87875e35b rtpjitterbuffer: fix locking
Take the lock earlier so that we do things that follow with the right
locking.
2013-07-24 10:49:03 +02:00
Wim Taymans
dece8413ef rtpsession: don't use invalid times in RTCP timeouts
An invalid timeout can be calculated when we disabled RTCP by setting the
bandwidth to 0. Make sure all code can handle this case.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=674626
2013-07-23 17:41:48 +02:00
Wim Taymans
25e0f0d6b6 rtpsession: lock session when changing bandwidth
Take the session lock when changing the bandwidth properties so that we don't
end up with inconsistent behaviour.
2013-07-23 17:41:48 +02:00
Wim Taymans
c337265ee4 session: reset some RTCP variables
The early_send time was set to 0 and always triggering an early RTCP packet.
2013-07-23 17:41:48 +02:00
Edward Hervey
3d48d25756 qtdemux: Add all the mpeg XDCAM variants
This should cover all known XDCAM variants (which are all mpeg2 video)

Fixes #672227
2013-07-23 15:03:31 +02:00
Carlos Rafael Giani
95429f1d4b rtpbin: added custom downstream sync event
rtpbin can now send a custom in-band downstream event which informs
downstream that the bin has received an RTCP SR packet. This is useful
for applications which want to drop the initial unsynchronized received
RTP packets.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=703560

Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
2013-07-23 06:25:20 +02:00
Tim-Philipp Müller
f18b1f7e80 deinterlace: fix on-the-fly changing of "mode" and "fields" properties
We call setcaps() to reconfigure ourselves, but we need to pass
the current *sink* caps, not the source caps then. Also fix a
caps leak.

https://bugzilla.gnome.org/show_bug.cgi?id=641599
2013-07-22 18:00:16 +01:00
Sebastian Dröge
0c2ff91a5c wavparse: Add support for group-id in the stream-start event 2013-07-22 15:30:13 +02:00
Sebastian Dröge
169b490664 rtspsrc: Add support for group-id in the stream-start event 2013-07-22 15:30:13 +02:00
Sebastian Dröge
5a9f4a3cbc rtpsession: Add support for group-id in the stream-start event 2013-07-22 15:30:13 +02:00
Sebastian Dröge
57dd1189d5 matroskademux: Add support for group-id in the stream-start event 2013-07-22 15:30:13 +02:00
Sebastian Dröge
1a0278ed64 qtdemux: Add support for group-id in the stream-start event 2013-07-22 15:30:13 +02:00
Sebastian Dröge
1122698491 flvdemux: Add support for group-id in the stream-start event 2013-07-22 15:30:12 +02:00
Sebastian Dröge
6cc16da531 avidemux: Add support for group-id in the stream-start event 2013-07-22 15:30:12 +02:00
Mathieu Duponchelle
d67a671bfb videomixer: use gst_util_uint64_scale*_round.
There could be a case where:
      1) you do a new set_caps after buffers have been processed.
      2) ts_offset gets set to a different value, eg 0.033333333
      3) your pads get EOS, but the check dor that doesn't work
         because you use ts_offset + a truncated value < segment.stop
      4) so in the next collected, you end up comparing for example:
      0.9999999999 > 1., which is false and means you don't send EOS.

Also adds scale_round in two other places where it potentially could
have caused problems.
2013-07-21 19:21:57 -04:00
Olivier Crête
96a8fb92e2 qtdemux: Add WRLE support 2013-07-19 14:58:30 -04:00
Tim-Philipp Müller
aa7d597120 qtdemux: make files from Vivotek camera play
Skip tracks of 'vivo' subtype with empty stsd instead of
erroring out saying that the file is broken.

https://bugzilla.gnome.org/show_bug.cgi?id=699791
2013-07-19 19:38:30 +01:00
Tim-Philipp Müller
ce52b319ff qtmux: when streaming don't try to seek when stopping
It might cause errors in sinks that are not seekable and
have reported this (like e.g. fdsink)

https://bugzilla.gnome.org/show_bug.cgi?id=696228
2013-07-19 17:31:38 +01:00
Wim Taymans
bdd3c31902 qtdemux: simplify some helpers
Some helper functions are not needed anymore or can be simplified.
2013-07-19 17:26:54 +02:00
Wim Taymans
61a8937ced qtdemux: for non-raw video, move palette in caps
We only need to append the palette to raw video buffers, non-raw video has the
palette in the caps still.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=704292
2013-07-19 17:14:46 +02:00
Arnaud Vrac
40ab78825c qtdemux: nitpicking in esds parsing 2013-07-19 14:26:18 +02:00
Arnaud Vrac
d0d25a5e1f qtdemux: set proper caps for mpeg-1 audio
Remove AAC specific fields from mpeg-1 audio caps, remove assumption
that the mpeg1 audio layer is 3, and set `parsed' field.

https://bugzilla.gnome.org/show_bug.cgi?id=704548
2013-07-19 14:26:08 +02:00
Arnaud Vrac
5def061d20 qtdemux: remove chapter stream
Remove all streams that are actually table of contents, since we will
never need the data after parsing them.
2013-07-18 11:48:12 +02:00
Arnaud Vrac
ae67c13416 qtdemux: send gap event for sparse streams in push mode
This allows to pre-roll at least if the next subtitle buffer
is far away.
2013-07-18 11:48:11 +02:00
Arnaud Vrac
1237898351 qtdemux: do not use indexes from sparse stream when seeking in push mode
This makes seeking more accurate in push mode, since the previous
keyframe on a sparse stream might be far away.
2013-07-18 11:48:11 +02:00
Arnaud Vrac
e561d12655 qtdemux: advertise subtitle streams as sparse 2013-07-18 11:48:11 +02:00
Arnaud Vrac
6e26f1d067 mastrokademux: do not push discont buffers if they aren't discont
Unset the discont flag instead of posssibly pushing a buffer with
a flag that's still set.

https://bugzilla.gnome.org/show_bug.cgi?id=682110
2013-07-17 18:10:11 +01:00
Wim Taymans
4c97701650 qtdemux: extract the palette from stsd
Sometimes a palette is inside the stsd, extract it instead of always using
the default one
2013-07-17 15:17:19 +02:00
Sebastian Dröge
9f73447229 goom2k1: Fix event handling and negotiate as soon as possible 2013-07-17 14:30:16 +02:00
Sebastian Dröge
78c7c16e9e goom: Fix event handling and negotiate as soon as possible 2013-07-17 14:28:43 +02:00
Wim Taymans
6b82c89562 qtdemux: add support for WRAW
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=704292
2013-07-17 09:57:17 +02:00
Wim Taymans
f698483bb3 qtdemux: palette is appended to buffers, not in caps
Fix the palette handling, in 1.0 we append the palette to the buffer instead of
placing it on the caps.

See also https://bugzilla.gnome.org/show_bug.cgi?id=704292
2013-07-17 09:57:16 +02:00