Commit graph

917 commits

Author SHA1 Message Date
Edward Hervey
5a0cdc7001 tests: Fix multiqueue test for latest commits.
The problem lies in the fact that multiqueue will now operate somewhat
similarly to the flow aggregation logic of demuxers and therefore
will stopp whenever all downstream pads return NOT_LINKED and/or
UNEXPECTED and there's no more buffers to push.

The latest commits should not affect any regular use-case, but the bug
report will be kept open so the previous behaviour can be re-established
if needed.

Fixes #609486
2010-02-10 14:40:17 +01:00
Edward Hervey
9cc47f8cba Revert "multiqueue: handle UNEXPECTED flowreturn better"
This reverts commit fbdf4dceda.

Partly fixes #609274
2010-02-09 15:58:36 +01:00
Tim-Philipp Müller
712189398c checks: fix spurious ghost pad check failure 2010-01-27 00:24:49 +00:00
Wim Taymans
fbdf4dceda multiqueue: handle UNEXPECTED flowreturn better
When we receive an UNEXPECTED flowreturn from downstream, we must not shutdown
the pushing thread because upstream will at some point push an EOS that we still
need to push further downstream.

To achieve this, convert the UNEXPECTED return value to OK. Add a fixme so that
we implement the right logic to propagate the flowreturn upstream at some point.

Also clean up the unit test a little.

Fixes #608136
2010-01-26 17:07:31 +01:00
Wim Taymans
381d35fd1e pad: Fix problem with destroy callback not being called
When we unblock a pad with the same user_data, the destroy callback is not
called. This leads to refcounting leaks that cannot be avoided. Instead always
call the destroy notify whenever we install a new pad block.
In particular, this fixes a nasty pad leak in decodebin2.

Also update the unit test to have more accurate comments and test the required
behaviour.
2009-12-23 21:20:14 +01:00
Tim-Philipp Müller
3c7c9692ac plugin-scanner: rename plugin-scanner helper binary to gst-plugin-scanner
and install into a different directory $(libexecdir/gstreamer-0.10) so that
everything is versioned properly.

NOTE: run 'make clean' after updating; if you are running an uninstalled setup,
you will need to update your gst-uninstalled script (unless it's symlinked
to gstreamer core master) and exit/enter your uninstalled environment to get
the updated environment. If you are running an installed setup, you should
run 'make uninstall' before merging this change or remove the old
plugin-scanner binary manually.

Fixes #601698.
2009-11-18 09:28:08 +00:00
Jan Schmidt
7a8fa2b6a0 check: Add a debug status to the systemclock test
Next time it fails on a buildbot we can see which clock id
return it is getting.
2009-11-16 18:29:01 +00:00
Ole André Vadla Ravnås
73f2d464b7 miniobject: avoid race when recycling buffers
Avoid a race where a miniobject is recycled and quickly freed, which causes the
g_type_free_instance() to be called on the same object twice.

Ref the object before calling the finalize method and check if we still need to
free it afterward.

Also add a unit test for this case.

Fixes #601587
2009-11-13 11:45:48 +01:00
Edward Hervey
70a08107fd tests: Make sure we use the local libgstbase and not a stray outside one.
Theoretically we should also do this for all local libraries to make sure
we don't test with a 'stray' outside library.
2009-11-05 21:09:28 +01:00
Edward Hervey
5583220a1d tests/fakesink: Add some debugging 2009-10-22 12:33:37 +02:00
Edward Hervey
ca054ff4e5 tests/faeksink: Lower the number of threads to avoid timeouts
We just end up with way too much contention in glib otherwise.
2009-10-22 12:33:01 +02:00
Michael Smith
d833b39a85 Remove executable bits on xml unit test. 2009-10-20 12:21:41 -07:00
Sebastian Dröge
4917bb4fc2 gstobject: Add simple unit test for gst_object_has_ancestor() 2009-10-14 08:34:03 +02:00
Jan Schmidt
ffb8518d01 check: Disable the test_fail_abstract_new() test entirely on OS/X
Fixes a compiler warning from the function being compiled but not
used.
2009-10-12 21:51:55 +01:00
Jan Schmidt
2d4795cd17 checks: Disable a fairly silly gstobject test on OS/X
This test used to SIGBUS on OS/X but now SIGSEGV's instead on
Snow Leopard. It's not worth the effort to figure out which platform
should produce which error for what is fundamentally a pretty silly
test, so just disable it on OS/X
2009-10-12 14:24:53 +01:00
Jan Schmidt
5dbe63c07a check: Hopefully fix an 'may be used uninitialized' warning on OS/X 2009-10-08 17:19:38 +01:00
Jan Schmidt
5c46b8774b gitignores: Ignore the bytewriter check binary 2009-10-08 10:39:28 +01:00
Jan Schmidt
077ca39def checks: Fix string leaks in the new childproxy test 2009-10-08 02:20:51 +01:00
Stefan Kost
558f4aca59 tests: add ghostpad test for setting target again after pad is linked 2009-10-07 22:41:30 +03:00
Stefan Kost
593fc8894b tests: remove empty lines from wrong indent run 2009-10-07 22:41:29 +03:00
Jan Schmidt
01cbe5012a check: Fix compilation of the bytewriter test 2009-10-07 20:38:49 +01:00
Sebastian Dröge
28c4bfc1c4 bytewriter: Add unit test 2009-10-07 18:40:37 +02:00
Jan Schmidt
a39ca4a9c7 check: Attempt to fix type-punning warning in the gstiterator test 2009-10-07 16:36:31 +01:00
Jan Schmidt
8b90cf1be1 check: Make sure to init the dataprotocol lib.
Call the gst_dp_init() function to ensure that the debug
category is initialised, to avoid g_criticals when running with
GST_DEBUG=5
2009-10-07 16:14:02 +01:00
Jan Schmidt
4446a6276b check: Use GST_DEBUG instead of g_message in the gdp test 2009-10-07 16:14:02 +01:00
Jan Schmidt
4c75d07f5f check: Add GST_PLUGIN_SCANNER env var to the check environment 2009-10-07 16:14:01 +01:00
Stefan Kost
09c7d34921 childproxy: initialize gvalue in _valist function. Fixes #595602
Reflow the code to move error handling to the end of the functions. Initialize
gvalue like we do in the setter. Add a unit-test module with two simple tests
the catche this bug.
2009-10-07 10:59:54 +03:00
Edward Hervey
3879cc60b1 tests: init more variables to avoid compiler warning on osx
Init variable to avoid compiler warning and make the build bot happy
(the compiler most likely complains about this because it doesn't know
here that fail_unless will abort/exit in the path where it fails).
2009-10-07 08:40:18 +02:00
Tim-Philipp Müller
abb9caf484 tests: init variable to avoid compiler warning on osx
Init variable to avoid compiler warning and make the build bot happy
(the compiler most likely complains about this because it doesn't know
here that fail_unless will abort/exit in the path where it fails).
2009-10-06 20:04:10 +01:00
Jan Schmidt
8105265087 Re-enable and fix disabled bit of the registry test 2009-10-06 19:51:44 +01:00
Jan Schmidt
51675e0c2a registry: Add registry helper phase 1
Phase 1 of adding the registry scan helper
2009-10-06 19:51:42 +01:00
Sebastian Dröge
7464062ff2 utils: Fix GMP scaling unit test
GMP only uses "unsigned long int", which is 32 bit
on 32 bit architectures and can't hold a guint64.
This resulted in false unit test failures on 32 bit architectures.

Fixes bug #595133.
2009-09-15 11:31:15 +02:00
Jan Schmidt
057afdd5cd check: Fix version check tests
Accomodate the slightly changed semantics in the plugin version check
where a CVS version just before a release is acceptable.
2009-09-11 20:43:51 +01:00
Tim-Philipp Müller
080b2e4fd5 bytereader: add inlined _unchecked() variants for some functions
API: gst_byte_reader_skip_unchecked()
API: gst_byte_reader_peek_*_unchecked()
API: gst_byte_reader_get_*_unchecked()
API: gst_byte_reader_{peek,get,dup}_data_unchecked()
2009-09-06 18:51:13 +01:00
Sebastian Dröge
3a5cceeb6b iterator: Add unit test for the single iterator 2009-09-01 10:21:31 +02:00
Sebastian Dröge
2919e5add8 gstutils: Add special random unit test for 64 scaling functions
This tests 100000 random multiplications/divisions of all scaling
function variants and compares the result with the result that is
generated by GMP on the same input.

For this check for GSL and GMP during configure but only use
it for this single unit test.

Testing functions were provided by Kipp Cannon <kcannon@ligo.caltech.edu>
2009-08-14 11:12:50 +02:00
Sebastian Dröge
535952c9fa gstutils: Add (very) minimal unit test for the new rounding scaling functions 2009-08-13 16:32:28 +02:00
Sebastian Dröge
276a55fd24 gstsegment: Actually start==stop==segment_start is inside the segment
Still the old code was wrong as it claimed that start==stop<segment_start
would be inside the segment and returned insane clipping differences.
2009-08-11 13:21:35 +02:00
Sebastian Dröge
868538945b gstsegment: Fix unit test and add an additional test
The previous test assumed that start=stop=segment_start will
be inside the segment but this is wrong.
2009-08-11 13:03:03 +02:00
Sebastian Dröge
46b2a5a34e gstbus: Unref pipeline after usage in test_custom_main_context unit test
This makes the core unit tests valgrind clean again.
2009-08-11 05:48:22 +02:00
Tim-Philipp Müller
60a962dcb8 checks: don't forget to include config.h in the GstObject unit test 2009-08-10 14:30:34 +01:00
Tim-Philipp Müller
657c68fc99 checks: try to fix GstObject unit test on OSX
Seems like we get SIGBUS instead of SIGSEGV here when GLib crashes
where it shouldn't crash (and we even have a unit test for that!).
2009-08-10 13:05:57 +01:00
Tim-Philipp Müller
3bf19f0a45 checks: set pipelines to NULL state in parse-launch unit test
Fixes timeouts in gst_task_cleanup_all().
2009-08-10 12:01:48 +01:00
Tim-Philipp Müller
a6c84b2ae6 checks: set pipeline back to NULL state in GstBus unit test
Fixes timeout in gst_task_cleanup_all().
2009-08-10 11:55:52 +01:00
Tim-Philipp Müller
699539a331 gitignore: ignore new queue-error test 2009-08-07 02:36:29 +01:00
Mark Nauwelaerts
3f0e4bd6f6 queue: add unit test
Make a downstream element return an error after upstream has already
put all data into queue (including EOS).  As such, upstream
will not be around to pick up the error, so it is up to queue to
act appropriately.  See #589991.

Note there may be downstream fatal errors (e.g. negotiation) that do
not warrant an error message already having been posted.
2009-08-06 13:40:18 +02:00
Wim Taymans
96e342b686 tests: don't set caps on unwritable buffers
Take the ref after setting the caps on a buffer because else the buffer is
techinically not writable.
2009-08-06 10:53:01 +02:00
Wim Taymans
ffca244c26 tests: make sure the tasks are joined
Call _clean_all() on the task to make sure everything is joined and stopped.

See #589127
2009-07-20 18:03:21 +02:00
Tim-Philipp Müller
9459a93cb4 tags: only emit a g_warning() for empty tag strings for git versions
For now, don't show a g_warning() for empty tag strings and NULL
tags with non-git versions; we should wait for the fixes in our
plugin modules to make it into a release before we enable this
unconditionally.
2009-07-16 13:59:07 +01:00
Jan Schmidt
7bf3554228 structure: Change NULL and empty string handling
Don't forbid the empty string "" in generic structures, only in taglists.
Properly allow the NULL string by adding special cases for serialising
and deserialising it. prop1=(string)NULL is the NULL string,
prop1=(string)"NULL" is the actual string with the value "NULL"
2009-07-13 18:28:37 +01:00
Tim-Philipp Müller
6b64d41937 bytereader: add a bunch of utility functions for strings and a data dup function
API: gst_byte_reader_dup_data
API: gst_byte_reader_dup_string
API: gst_byte_reader_dup_string_utf8
API: gst_byte_reader_dup_string_utf16
API: gst_byte_reader_dup_string_utf32
API: gst_byte_reader_skip_string
API: gst_byte_reader_skip_string_utf8
API: gst_byte_reader_skip_string_utf16
API: gst_byte_reader_skip_string_utf32
API: gst_byte_reader_peek_string
API: gst_byte_reader_peek_string_utf8
API: gst_byte_reader_get_string
API: gst_byte_reader_get_string_utf8

And some basic unit tests. Fixes #586568.
2009-06-23 02:17:48 +01:00
Tim-Philipp Müller
2b4d127ca0 tests: fix crash and leak in bufferlists unit test
Don't access already-freed iterator, makes check-valgrind work and fixes
crash on PPC; unref buffer we're going to steal to make valgrind happy.
2009-06-21 14:43:08 +01:00
Wim Taymans
6438f6f9b9 bufferlist: Various cleanups
Add new method to iterate a bufferlist without having to allocate an iterator.
Add convenience method for getting an item from the list based on the group and
index.
Remove redundant _do_data callback and method.
Update unit-tests and add some more for the new methods.
2009-06-19 15:31:53 +02:00
Tim-Philipp Müller
dccea0406b taglist: add functions to create a new taglist with tags in one go
Add functions to create a new tag list and set tags in one go, which
is nice for use in combination with functions that take ownership of
the taglist, such as gst_event_new_tag() or gst_element_found_tags().

API: add gst_tag_list_new_full()
API: add gst_tag_list_new_full_valist()
2009-06-14 16:17:50 +01:00
Tim-Philipp Müller
674447fafe bytereader: add gst_byte_reader_masked_scan_uint32()
Add a pattern scan function similar to the one recently added to
GstAdapter, and a unit test (based on the adapter one).
Fixes #585592.

API: add gst_byte_reader_masked_scan_uint32()
2009-06-13 10:53:49 +01:00
Tim-Philipp Müller
cdd47a37e9 structure: add gst_structure_*_get*() vararg functions
Add a bunch of vararg getter convenience functions to complement
the vararg setter functions, and a basic unit test. Fixes #534208.

API: gst_structure_get()
API: gst_structure_id_get()
API: gst_structure_get_valist()
API: gst_structure_id_get_valist()
2009-06-10 09:39:12 +01:00
Tim-Philipp Müller
998b2392d3 Remove double semicolons at end of line 2009-06-08 17:13:17 +01:00
Wim Taymans
0e74bfe248 segment: add gst_segment_set_running_time
Added new method for closing the segment to a specific running time.

API: GstSegment::gst_segment_set_running_time()
2009-06-04 12:53:20 +02:00
Wim Taymans
92984a116b segment: add method for converting to position
Add gst_segment_to_position() that converts a running_time to a position in the
segment. A faulty variant of this function is currently used in inputselector
but we'll need it for frame stepping too.

API: GstSegment::gst_segment_to_position()
2009-06-03 19:06:30 +02:00
Stefan Kost
47d9904eba structure: fix serialisation of nested structures.
Use string_warp/unwrap to escape delimiters, otherwise deserialisation fails.
Also move GST_ASCII_IS_STRING to private header to avoid keeping it in sync.
Also use '\0' when terminating a string for better readability.
2009-06-02 18:39:17 +03:00
Stefan Kost
fc866b82db controller: add test for cubic int. and too few control points
Added another tests to check some worries in Bug #582564.
2009-06-01 11:08:31 +03:00
Tim-Philipp Müller
7e4b164c12 fakesink: hack around crasher bug in g_object_notify() for out-of-band events
GObject may crash if two threads do concurrent g_object_notify() on the same
object. This may happen if fakesink receives an out-of-band event such as
FLUSH_START while processing a buffer or serialised event in the streaming
thread. Since this may happen with the default settings during a common
operation like a seek, and there seems to be little chance of a timely fix
in GObject (see #166020), we should hack around this issue by protecting all
of fakesink's direct g_object_notify() calls with a lock.

Also add unit test for the above.

Fixes #554460.
2009-05-31 19:17:33 +01:00
Tim-Philipp Müller
30c890c7a2 taglists: warn if someone tries to add empty or NULL string tags to a taglist
Also warn if an element or application tries to add a field with an
empty string to a structure (NULL strings are still needed and
allowed though) and do all those checks in the right function.

Fixes #559643.
2009-05-31 15:38:01 +01:00
Wim Taymans
087c8957d2 pipeline: deprecate old methods, fix test
Deprecate the old _set_stream_time and _get_last_stream_time methods because
they are now equivalent to the better named _set/_get_start_time.
2009-05-29 12:21:36 +02:00
Arnout Vandecappelle
c74c3bf1b3 adapter: fix _masked_scan_uint32() at boundaries
gst_adapter_masked_scan_uint32 could return values smaller than offset
if the first byte(s) of the mask are 0 and the pattern matches the
beginning of the adapter.
Added examples to documentation of gst_adapter_masked_scan_uint32().
Also added some more masked boundary tests.
Fixes #584118
2009-05-28 22:02:21 +02:00
Wim Taymans
23314ddefb tests: one more adapter test 2009-05-20 10:28:46 +02:00
Wim Taymans
270723c85c adapter: add _masked_scan_uint32
Add a reasonably optimized new gst_adapter_masked_scan_uint32() function
to scan the adapter for a pattern after applying a mask.

Add some unit tests.

API: GstAdapter::gst_adapter_masked_scan_uint32()

Fixes #583187
2009-05-20 00:37:53 +02:00
Wim Taymans
f6d71be830 tests: add another test for adapter timestamps 2009-05-13 17:09:32 +02:00
Wim Taymans
0d9ba7c7fe tests: add new timestamp unit test 2009-05-13 16:48:38 +02:00
Jonas Holmberg
22a48fb08c bufferlist: hook up the pad functions
Reuse buffer code for bufferlists. Not sure if this measurably impacts performance
for the simple buffer case, if it does after doing some benchmarks, we can
decouple it later.

Fixes #572285
2009-05-12 15:18:53 +02:00
Jonas Holmberg
d99cf4db1b bufferlist: add docs/build/debug/unittest
See #572285
2009-05-12 15:18:52 +02:00
Wim Taymans
605639a2bf adapter: optimize taking the headbuffer
When a are requested to take a buffer from the adapter that is exactly the
headbuffer, don't make a subbuffer of it but return that head buffer.

Add a unit-test for this new optimisation.
2009-05-12 10:25:40 +02:00
Wim Taymans
4b604f7da6 Pad: post STREAM_STATUS_TYPE_CREATE
Post a stream-status message indicating that a new task was created so that the
application has a chance to change the properties of the task.

Fix unit test to take into account the new ref of the message.
2009-05-12 00:27:10 +02:00
Wim Taymans
2aaf72d259 tests: add a unit-test for the stream-status
Add a unit test for the STREAM_STATUS messages.
2009-05-12 00:07:06 +02:00
Wim Taymans
2efaf65c4c tests: fix unit-tests for new stream-status
Fix the unit-tests so that they don't fail on the new stream-status messages
that are emited now.
2009-05-12 00:00:54 +02:00
Stefan Kost
dd3c9ab6b6 controller: factor out duplicated code and add a description for it.
Also fix typo in the tests while reviewing them.
2009-04-14 22:08:56 +03:00
Tim-Philipp Müller
116c8be6bf API: add FIXME and DUMPMEM log levels and convenience macros
Two new log levels to dump FIXMEs into the log and to log data
in form of a hex dump (#578114).

API: GST_CAT_FIXME_OBJECT
API: GST_CAT_MEMDUMP_OBJECT
API: GST_CAT_FIXME
API: GST_CAT_MEMDUMP
API: GST_FIXME_OBJECT
API: GST_MEMDUMP_OBJECT
API: GST_FIXME
API: GST_MEMDUMP
2009-04-08 21:32:05 +01:00
Stefan Kost
c9917a1a84 tests: remove the hacks to workaround the pad-leak 2009-04-08 17:49:18 +03:00
Sebastian Dröge
322d0b0fd8 tests: Don't define global buffers variable, it's already defined by libgstcheck 2009-03-30 15:45:02 +02:00
Wim Taymans
df30f60048 clock: fix 2 wakeup races.
when an entry being waited on in the async thread is unscheduled, clear the
wakeup queue so we can continue waiting on other entries.
When an entry being waited on in the async thread is unlocked because an earlier
entry was added to the list, set the entry to OK again. This makes sure that
only the entries being waited on have the BUSY flag set and wake up the timer
poll when they are unscheduled.
2009-03-26 15:59:17 +01:00
Tim-Philipp Müller
c4e10b9535 API: add gst_tag_list_get_buffer{_index}
Convenience API, mostly for image tags, so people don't have to
figure out the whole GValue/GstValue thing just for this.
2009-03-26 14:21:10 +00:00
Jan Schmidt
4ef524f5ec systemclock: Clean up the tests a bit.
Add some cleanups to the system clock tests, to free all the memory and
unschedule/unref all clock IDs we allocate.

Use a mutex in one test to avoid potential threading problems on multicore
machines.
2009-03-26 12:18:09 +00:00
Jan Schmidt
b35f424858 systemclock: Add a test for sync/async clockid interactions
This test randomly hangs if there are problems with the reliability of
unscheduling sync and async clockID's on the system clock.
2009-03-26 12:18:09 +00:00
Wim Taymans
da0060d3aa pad: call new callbacks set in the block callback
Keep track of when a new callback is installed in the callback and call the new
callback in that case.
Add unit test for checking pad blocking.
Fixes #573823.
2009-03-09 11:48:36 +01:00
Sebastian Dröge
3c6448c64e API: Add gst_util_array_binary_search() for binary searchs on a sorted array
This will be mostly useful in all elements that have some kind of internal
seek/index table. Currently almost all of them (or even all of them)
are using a linear search although the used array is already sorted,
wasting some CPU time without good reason.

Fixes bug #573623.
2009-03-02 16:17:45 +01:00
Edward Hervey
b81b9c0e59 Remove core file from previous commit 2009-02-22 22:09:39 +01:00
Alessandro Decina
d3940f520b GstPad: Add gst_pad_set_blocked_async_full
This allows connecting a GDestroyNotify for when the callback is removed/replaced.
Partially fixes #514717
2009-02-22 20:01:05 +01:00
Wim Taymans
4b986a4a94 Add message to request a state change
Add a GST_MESSAGE_REQUEST_STATE that can be posted by element when they would
like to have the application change the state of the pipeline. the primary use
case is to pause the pipeline when an audio mixer is mixing a higher priority
stream but it can also be used for other purposes.

Add some docs and a unit test.

Implement the REQUEST_STATE message in gst-launch.

API: gst_message_new_request_state()
API: gst_message_parse_request_state()
API: GST_MESSAGE_REQUEST_STATE
2009-02-18 15:31:55 +01:00
Wim Taymans
26f368f7e7 Clear target when the target pad disappears
When the target pad disappears (because it was explicitly unlinked or the
element was removed/unreffed) make sure we receive a notify with the unlink
function on the proxy pad and clear the target. We use a simple flag to not do
this and cause deadlocks when the target was changed explicitly using the
ghostpad functions.

Update the unit test because we now unref the target sooner (and correctly).
2009-02-16 12:58:34 +01:00
Stefan Kost
697055b3e4 tests: GstClockTime is always >= 0 2009-02-05 13:57:05 +02:00
Wim Taymans
fe4233120c GstBaseSink: avoid calling preroll multiple times
Fix a regression introduced by fix for #567725 in commit
1c7ab4ed4f. We should only call the preroll
function once namely when we did not yet commit the state change.

Add a unit test to check that we call the preroll function when interrupting the
clock_wait (see #567725).

Add a unit test to check that we only call the preroll function once.
2009-02-03 12:52:49 +01:00
Jan Schmidt
6f9b066019 check: Fix comment about the timeout for generic stress test.
Setting the timeout to 0 makes it infinite, so fix the comment
above accordingly.
2009-01-31 21:35:22 +00:00
Jan Schmidt
da0a34e493 check: Increase timeout for the tee test
The tee stress test keeps timing out for me on one of the slower
machines, so increase the timeout to 3 mins.
2009-01-31 21:35:21 +00:00
Jan Schmidt
e89ce19497 Update a bunch of gitignores to clean up my git status output 2009-01-23 16:08:40 +00:00
Wim Taymans
ae76b3d606 do not call the unlink function on the target pad when the ghostpad
is unlinked.
Add some unit tests for this behaviour.
Fixes #566936.
2009-01-21 12:21:49 +01:00
Tim-Philipp Müller
0ee5e36cfb gst/gstbus.c: Fix order of members in GstBusSource structure - the first member must be the parent structure ie. GSou...
Original commit message from CVS:
* gst/gstbus.c: (gst_bus_set_main_context), (gst_bus_create_watch):
Fix order of members in GstBusSource structure - the first member
must be the parent structure ie. GSource. Should make bus sources
attached to non-default main contexts work in all cases now (ie.
primarily in cases where the callback has a non-NULL user data
argument). Fixes #562170.
* tests/check/gst/gstbus.c: (test_custom_main_context):
Add unit test for the above, based on code by
Justin Karneges <justin at affinix com>.
2009-01-17 21:04:41 +00:00
Tim-Philipp Müller
428ead89b8 gst/gstbus.c: Make GstBusSource work with non-default main contexts (#562170).
Original commit message from CVS:
* gst/gstbus.c: (gst_bus_dispose), (gst_bus_get_property),
(gst_bus_wakeup_main_context), (gst_bus_set_main_context),
(gst_bus_post), (gst_bus_source_prepare), (gst_bus_source_finalize),
(gst_bus_create_watch):
Make GstBusSource work with non-default main contexts (#562170).
* tests/check/gst/gstbus.c: (message_func_eos), (message_func_app),
(test_watch), (test_watch_with_custom_context), (gst_bus_suite):
Add test case for GstBusSource with a non-default main context.
* tests/check/libs/.cvsignore:
Ignore more.
2008-12-27 17:41:11 +00:00
Alessandro Decina
1b13418a0a Don't forward gst_pad_set_caps() on a source ghostpad to its target.
Original commit message from CVS:
* gst/gstghostpad.c:
* tests/check/gst/gstghostpad.c:
Don't forward gst_pad_set_caps() on a source ghostpad to its target.
That would cause the ghostpad to emit notify::caps two times (fist
from gst_pad_set_caps() and after from on_src_target_notify()).
2008-12-19 15:11:06 +00:00
Wim Taymans
f1be570630 tests/check/gst/gstghostpad.c: Add some more unit-tests for the ghostpad notify signal, one of which currently fails.
Original commit message from CVS:
* tests/check/gst/gstghostpad.c: (ghost_notify_caps),
(GST_START_TEST):
Add some more unit-tests for the ghostpad notify signal, one of which
currently fails.
2008-12-19 11:24:36 +00:00
Alessandro Decina
c0a2c5839e In a source ghostpad, when caps are changed in the target pad, the change needs to be reflected in the ghostpad.
Original commit message from CVS:
* gst/gstghostpad.c:
* tests/check/gst/gstghostpad.c:
In a source ghostpad, when caps are changed in the target pad, the
change needs to be reflected in the ghostpad.
Fixes #564863.
2008-12-17 16:16:45 +00:00
Stefan Kost
f28a2a6cfc More complete unit tests. Fix handling of empty taglists (they were not merged before).
Original commit message from CVS:
* gst/gsttaglist.c:
* tests/check/gst/gsttag.c:
More complete unit tests. Fix handling of empty taglists (they were
not merged before).
2008-12-16 09:23:21 +00:00
Sebastian Dröge
c09870ede4 tests/check/libs/controller.c: This test should return TRUE now as syncing an uncontrolled object will succeed now (t...
Original commit message from CVS:
* tests/check/libs/controller.c: (GST_START_TEST):
This test should return TRUE now as syncing an uncontrolled
object will succeed now (there's nothing to sync).
2008-12-09 10:58:01 +00:00
Wim Taymans
d2e5ffde24 gst/gstsegment.c: Set the last_stop to a more meaningful position when configuring the segment. ie. the start/stop of...
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_newsegment_full):
Set the last_stop to a more meaningful position when configuring the
segment. ie. the start/stop of the segment or clipped against the
updated segment boundaries.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
Add some unit tests for the last_stop.
2008-10-23 09:49:07 +00:00
Sebastian Dröge
075811e654 plugins/elements/gsttee.c: Fix flow aggregation of tee. Error out immediately for all flow returns except OK and NOT_...
Original commit message from CVS:
* plugins/elements/gsttee.c: (gst_tee_handle_buffer):
Fix flow aggregation of tee. Error out immediately for all flow returns
except OK and NOT_LINKED, return NOT_LINKED if all pads are not linked
and return OK if at least one pad is linked.
Before we errored out on "fatal" flow returns (i.e. not for WRONG_STATE)
and otherwise returned the flow return of the last pad, which is wrong.
* tests/check/elements/tee.c: (_fake_chain), (_fake_chain_error),
(GST_START_TEST), (tee_suite):
Add unit tests for the flow aggregation.
2008-10-14 12:34:56 +00:00
Wim Taymans
97ec47cabb docs/design/part-TODO.txt: Remove item from the todo list because it was fixed with the latency state change rewrites.
Original commit message from CVS:
* docs/design/part-TODO.txt:
Remove item from the todo list because it was fixed with the latency
state change rewrites.
* docs/design/part-seeking.txt:
* docs/design/part-segments.txt:
Update some docs.
* gst/gstevent.c: (gst_event_new_new_segment_full),
(gst_event_parse_new_segment_full), (gst_event_new_buffer_size),
(gst_event_parse_buffer_size), (gst_event_new_qos),
(gst_event_parse_qos), (gst_event_new_seek),
(gst_event_parse_seek), (gst_event_new_latency),
(gst_event_parse_latency):
Use quarks to construct and parse events.
* gst/gstquark.c: (_priv_gst_quarks_initialize):
* gst/gstquark.h:
Add some more quarks to the table.
Emit a warning when the quark tables are not in sync.
* tests/check/gst/gstbus.c: (GST_START_TEST):
Add an assert.
2008-10-13 17:19:25 +00:00
Wim Taymans
bc8e367885 gst/gstbin.c: The message src can be NULL, don't try to print the object names in that case.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_remove_func), (update_degree),
(gst_bin_handle_message_func):
The message src can be NULL, don't try to print the object names in that
case.
* libs/gst/base/gstbasesink.c: (gst_base_sink_pad_activate):
Add some more debug info.
* tests/check/pipelines/simple-launch-lines.c: (run_pipeline),
(GST_START_TEST):
Add some debug.
Fix the test, pull based sinks go ASYNC to PAUSED, just like other
scheduling modes.
2008-10-10 10:38:12 +00:00
Edward Hervey
3159228799 tests/check/gst/gstutils.c: We now see 3 events go through our pad, since basesink now sends upstream latency events.
Original commit message from CVS:
* tests/check/gst/gstutils.c: (probe_do_nothing), (data_probe),
(buffer_probe), (event_probe), (GST_START_TEST):
We now see 3 events go through our pad, since basesink now sends
upstream latency events.
2008-10-10 09:11:10 +00:00
Jan Schmidt
c64e9b0c7a tests/check/: Add Sparc ABI checks
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/gst/gstabi.c:
* tests/check/gst/struct_sparc.h:
* tests/check/libs/libsabi.c:
* tests/check/libs/struct_sparc.h:
Add Sparc ABI checks
* tests/check/gst/gstvalue.c: (GST_START_TEST):
Cast signed integer to unsigned to avoid a compiler warning.
2008-10-07 15:12:21 +00:00
Olivier Crete
ee0eaf824b gst/gstbin.c: Keep track of pads that are being linked/unlinked and resync the state changes.
Original commit message from CVS:
Base on Patch by: Olivier Crete <tester at tester dot ca>
* gst/gstbin.c: (gst_bin_init), (gst_bin_add_func),
(gst_bin_remove_func), (update_degree),
(gst_bin_sort_iterator_new), (gst_bin_handle_message_func):
Keep track of pads that are being linked/unlinked and resync the state
changes.
* gst/gstpad.c: (gst_pad_get_direction),
(gst_pad_set_chain_function), (gst_pad_set_getrange_function),
(gst_pad_set_checkgetrange_function), (gst_pad_unlink),
(gst_pad_link_prepare), (gst_pad_link),
(gst_pad_event_default_dispatch), (gst_pad_chain), (gst_pad_push),
(gst_pad_check_pull_range), (gst_pad_get_range),
(gst_pad_pull_range):
Some code cleanups, use macros to check pad direction.
Don't need to take the lock on the pad direction.
Post structure change when pads are linked/unlinked.
Change some checks into _return_if_fail().
* tests/check/gst/gstbin.c:
(test_link_structure_change_state_changed_sync_cb),
(GST_START_TEST), (gst_bin_suite):
Add testcase for pad link/unlinke resync during a state change.
Fixes #510354.
2008-10-06 16:15:02 +00:00
Sebastian Dröge
b377c58e43 Add bit reader and byte reader classes, including documentation and an extensive unit test suite. Fixes bug #553554.
Original commit message from CVS:
* docs/libs/gstreamer-libs-docs.sgml:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/Makefile.am:
* libs/gst/base/gstbitreader.c: (gst_bit_reader_new),
(gst_bit_reader_new_from_buffer), (gst_bit_reader_free),
(gst_bit_reader_init), (gst_bit_reader_init_from_buffer),
(gst_bit_reader_set_pos), (gst_bit_reader_get_pos),
(gst_bit_reader_get_remaining), (gst_bit_reader_skip),
(gst_bit_reader_skip_to_byte):
* libs/gst/base/gstbitreader.h:
* libs/gst/base/gstbytereader.c: (GDOUBLE_SWAP_LE_BE),
(GFLOAT_SWAP_LE_BE), (gst_byte_reader_new),
(gst_byte_reader_new_from_buffer), (gst_byte_reader_free),
(gst_byte_reader_init), (gst_byte_reader_init_from_buffer),
(gst_byte_reader_set_pos), (gst_byte_reader_get_pos),
(gst_byte_reader_get_remaining), (gst_byte_reader_skip),
(gst_byte_reader_get_uint8), (gst_byte_reader_get_int8),
(gst_byte_reader_peek_uint8), (gst_byte_reader_peek_int8),
(gst_byte_reader_get_uint24_le), (gst_byte_reader_get_uint24_be),
(gst_byte_reader_get_int24_le), (gst_byte_reader_get_int24_be),
(gst_byte_reader_peek_uint24_le), (gst_byte_reader_peek_uint24_be),
(gst_byte_reader_peek_int24_le), (gst_byte_reader_peek_int24_be):
* libs/gst/base/gstbytereader.h:
* tests/check/Makefile.am:
* tests/check/libs/bitreader.c: (GST_START_TEST),
(gst_bit_reader_suite):
* tests/check/libs/bytereader.c: (GST_START_TEST),
(gst_byte_reader_suite):
Add bit reader and byte reader classes, including documentation
and an extensive unit test suite. Fixes bug #553554.
2008-10-06 12:41:53 +00:00
Jan Schmidt
86db1f680c Fix assertion in basetransform when the subclass chooses not to allocate a buffer in prepare_buffer(), and make capsf...
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
* plugins/elements/gstcapsfilter.c:
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/capsfilter.c:
Fix assertion in basetransform when the subclass chooses not to
allocate a buffer in prepare_buffer(), and make capsfilter error out
cleanly if requested to apply caps that don't completely specify the
buffer. Fixes #551509
2008-09-28 21:19:15 +00:00
Olivier Crete
68037404b8 Add threadsafe replacement functions for getting internal links of an element. Deprecate the old internal links funct...
Original commit message from CVS:
Based on patch by: Olivier Crete <tester at tester dot ca>
* docs/gst/gstreamer-sections.txt:
* win32/common/libgstreamer.def:
* gst/gstpad.c: (gst_pad_init),
(gst_pad_set_iterate_internal_links_function),
(int_link_iter_data_free), (iterate_pad),
(gst_pad_iterate_internal_links_default),
(gst_pad_iterate_internal_links), (gst_pad_get_internal_links):
* gst/gstpad.h:
Add threadsafe replacement functions for getting internal links of an
element. Deprecate the old internal links functions.
API:GstPad::gst_pad_set_iterate_internal_links_function()
API:GstPad::GstPadIterIntLinkFunction
API:GstPad::gst_pad_iterate_internal_links()
API:GstPad::gst_pad_iterate_internal_links_default()
* gst/gstghostpad.c: (gst_proxy_pad_do_iterate_internal_links),
(gst_proxy_pad_init):
Implement threadsafe internal links.
* tests/check/elements/tee.c: (GST_START_TEST), (tee_suite):
Unit test for internal links on tee. See #549504.
2008-09-01 10:42:04 +00:00
Edward Hervey
1639fb5905 tests/check/Makefile.am: libs/transform1 test requires libs/test_transform.c
Original commit message from CVS:
* tests/check/Makefile.am:
libs/transform1 test requires libs/test_transform.c
2008-08-30 12:57:47 +00:00
Edward Hervey
dd80b2030c Fix all leaks due to the bug in gst_pad_template_new() by which it does not steal the refcount of the given caps as s...
Original commit message from CVS:
* gst/gstutils.c: (gst_element_get_compatible_pad):
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
* tests/check/gst/gstpad.c: (name_is_valid), (GST_START_TEST):
Fix all leaks due to the bug in gst_pad_template_new() by which it does
not steal the refcount of the given caps as stated.
REVERT THIS COMMIT ONCE FIXED !
REVERT THIS COMMIT ONCE FIXED !
REVERT THIS COMMIT ONCE FIXED !
REVERT THIS COMMIT ONCE FIXED !
REVERT THIS COMMIT ONCE FIXED !
REVERT THIS COMMIT ONCE FIXED !
2008-08-30 11:55:59 +00:00
Wim Taymans
e93b94afdf libs/gst/base/gstbasesink.c: Improve position reporting in the flushing state.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_render_object),
(gst_base_sink_event), (gst_base_sink_chain_unlocked),
(gst_base_sink_negotiate_pull), (gst_base_sink_pad_activate_pull),
(gst_base_sink_get_position), (gst_base_sink_change_state):
Improve position reporting in the flushing state.
Also report the position when we are not yet prerolled but we
have a newsegment event. Fixes #543444.
Improve the pull-based negotiation code.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Add testcase for position reporting while flushing in PAUSED and
PLAYING.
* tests/check/generic/sinks.c: (GST_START_TEST):
Update unit-test, we can now query the position as soon as we receive a
NEWSEGMENT event.
2008-08-19 16:47:07 +00:00
Ole André Vadla Ravnås
fe969e6391 plugins/elements/gsttee.*: Protect pad_alloc with a new lock so that we can be sure that nothing is performing a pad_...
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås  <ole.andre.ravnas at tandberg com>
* plugins/elements/gsttee.c: (gst_tee_finalize), (gst_tee_init),
(gst_tee_request_new_pad), (gst_tee_release_pad),
(gst_tee_find_buffer_alloc), (gst_tee_buffer_alloc):
* plugins/elements/gsttee.h:
Protect pad_alloc with a new lock so that we can be sure that nothing is
performing a pad_alloc when removing the pad. Fixes #547835.
* tests/check/elements/tee.c: (buffer_alloc_harness_setup),
(buffer_alloc_harness_teardown), (app_thread_func),
(final_sinkpad_bufferalloc), (GST_START_TEST), (tee_suite):
Added testcase for shutdown race.
2008-08-15 17:01:07 +00:00
Wim Taymans
dc9983cbea libs/gst/base/gstbasetransform.c: Don't overwrite the outsize when calculating the expected size of a new buffer beca...
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_buffer_alloc), (gst_base_transform_suggest):
Don't overwrite the outsize when calculating the expected size of a new
buffer because we still need it in case we cannot process the new
buffer.
When converting the size of the new buffer to an upstream size, actually
use the expected size of the buffer, not some other random value.
Use an atomic int to signal that a new upstream caps suggestion is
available.
When we can convert the current buffer to a new format, check if the
buffer size is of the expected size and allocate a new buffer of the
expected size when this is not the case.
* tests/check/libs/transform1.c: (GST_START_TEST):
remove ifdeffed code from the unit test.
2008-08-14 13:57:58 +00:00
Wim Taymans
b08cd83cbb gst/gstcaps.c: Fix subset test.
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_structure_is_subset_field):
Fix subset test.
* tests/check/gst/gstcaps.c: (GST_START_TEST):
Improve unit test subset tests and add a testcase for the subset failure
cases.
* tests/check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
Improve subtraction unit test.
2008-08-07 12:28:28 +00:00
Olivier Crete
70a4cad10c gst/gststructure.c: Avoid overflows in fixation code when dealing with MAXINT values, which v4l2src seems to do.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/gststructure.c:
(gst_structure_fixate_field_nearest_fraction):
Avoid overflows in fixation code when dealing with MAXINT values, which
v4l2src seems to do.
Fixes #546328.
* tests/check/gst/gststructure.c: (GST_START_TEST):
Make a unit test to check the fix.
2008-08-05 15:03:27 +00:00
Wim Taymans
30f8603645 docs/libs/gstreamer-libs-sections.txt: Add new function:
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
Add new function:
API: GstBaseTransform::gst_base_transform_suggest()
* libs/gst/base/gstbasetransform.c: (gst_base_transform_finalize),
(gst_base_transform_init), (gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_configure_caps),
(gst_base_transform_can_transform),
(gst_base_transform_find_transform), (gst_base_transform_setcaps),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_activate),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled),
(gst_base_transform_set_gap_aware), (gst_base_transform_suggest),
(gst_base_transform_reconfigure):
* libs/gst/base/gstbasetransform.h:
Rewrite of basetransform to perform negotiation outside of the
buffer_alloc functions.  Fixes #545853.
* tests/check/libs/transform1.c: (GST_START_TEST),
(buffer_alloc_ct2):
Update unit test.
2008-08-05 11:11:00 +00:00
Stefan Kost
864a45ee13 tests/check/gst/gstpreset.c: Only run preset tests when $HOME is writable. Preliminary fix for #545433.
Original commit message from CVS:
* tests/check/gst/gstpreset.c:
Only run preset tests when $HOME is writable. Preliminary fix for
#545433.
2008-08-05 05:44:02 +00:00
Wim Taymans
5665680537 gst/gstbin.c: Fix race for bins that simulate ASYNC state changes by inserting
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_change_state_func), (bin_handle_async_done),
(gst_bin_handle_message_func):
Fix race for bins that simulate ASYNC state changes by inserting
ASYNC_START and ASYNC_DONE messages in their bus. We need to check for
pending ASYNC messages even when the bin does not have ASYNC children.
We note detect this behaviour because we will receive an ASYNC message
that is originating from the bin itself.
Fixes races with decodebin2 state changes.
* tests/check/gst/gstbin.c: (GST_START_TEST):
Add some more debug.
2008-08-04 15:49:13 +00:00
Sebastian Dröge
b30e78f7a8 tests/check/libs/gdp.c: Also enable the GDP unit test again on PPC now that the bug is fixed.
Original commit message from CVS:
* tests/check/libs/gdp.c: (gst_dp_suite):
Also enable the GDP unit test again on PPC now that the bug
is fixed.
2008-06-30 09:42:43 +00:00
Wim Taymans
e123c66377 tests/check/libs/transform1.c: Add some more tests with switching caps in buffer_alloc.
Original commit message from CVS:
* tests/check/libs/transform1.c: (buffer_alloc_pt1),
(set_caps_pt1), (GST_START_TEST), (set_caps_pt2), (transform_ip_1),
(set_caps_1), (set_caps_ct1), (transform_ct1),
(transform_caps_ct1), (transform_size_ct1), (buffer_alloc_ct1),
(set_caps_ct2), (transform_ct2), (transform_caps_ct2),
(transform_size_ct2), (buffer_alloc_ct2):
Add some more tests with switching caps in buffer_alloc.
2008-06-26 11:59:40 +00:00
Wim Taymans
4379ccf7e1 tests/check/libs/: More tests, prepare for tests with switching caps in buffer_alloc.
Original commit message from CVS:
* tests/check/libs/test_transform.c: (gst_test_trans_base_init),
(gst_test_trans_class_init), (result_sink_chain),
(result_buffer_alloc), (gst_test_trans_new), (gst_test_trans_free),
(gst_test_trans_push), (gst_test_trans_pop):
* tests/check/libs/transform1.c: (buffer_alloc_pt1),
(set_caps_pt1), (GST_START_TEST), (set_caps_pt2), (transform_ip_1),
(set_caps_1), (set_caps_ct1), (transform_ct1),
(transform_caps_ct1), (transform_size_ct1), (buffer_alloc_ct1),
(set_caps_ct2), (transform_ct2), (transform_caps_ct2),
(transform_size_ct2), (buffer_alloc_ct2),
(gst_basetransform_suite):
More tests, prepare for tests with switching caps in buffer_alloc.
2008-06-25 17:27:30 +00:00
Wim Taymans
23d8478698 docs/design/part-block.txt: Fix typo.
Original commit message from CVS:
* docs/design/part-block.txt:
Fix typo.
* docs/design/part-element-transform.txt:
Add notes about why transform needs to know input/output sizes.
Add some issues that need to be solved.
Add some more use cases.
* tests/check/libs/test_transform.c: (gst_test_trans_base_init),
(gst_test_trans_class_init), (result_sink_chain),
(result_buffer_alloc), (gst_test_trans_new), (gst_test_trans_free),
(gst_test_trans_push), (gst_test_trans_pop):
* tests/check/libs/transform1.c: (buffer_alloc_pt1),
(set_caps_pt1), (GST_START_TEST), (set_caps_pt2), (transform_ip_1),
(set_caps_1), (set_caps_ct1), (transform_ct1),
(transform_caps_ct1), (transform_size_ct1), (buffer_alloc_ct1),
(gst_basetransform_suite):
Add suport for different pad templates and buffer-alloc.
Add more checks for caps and buffer-alloc.
Add checks for proxy buffer alloc.
Add unit test for copy transform.
2008-06-25 10:53:52 +00:00
Sebastian Dröge
7c0bd009ce tests/check/gst/gstghostpad.c: Fix some memory leaks and uses of object instances that we don't actually own.
Original commit message from CVS:
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
Fix some memory leaks and uses of object instances that we don't
actually own.
2008-06-24 07:49:36 +00:00
Thomas Vander Stichele
fdca1e654d tests/check/: Use HAVE_VALGRIND_H some more.
Original commit message from CVS:
* tests/check/gst/gstbuffer.c:
* tests/check/pipelines/parse-launch.c:
Use HAVE_VALGRIND_H some more.
2008-06-20 21:08:47 +00:00
Wim Taymans
90629e72a2 tests/check/: Add some test basetransform element and the beginnings of various unit tests for it.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/libs/test_transform.c: (gst_test_trans_base_init),
(gst_test_trans_class_init), (gst_test_trans_init),
(gst_test_trans_set_data), (result_sink_chain),
(gst_test_trans_new), (gst_test_trans_free), (gst_test_trans_push),
(gst_test_trans_pop):
* tests/check/libs/transform1.c: (GST_START_TEST),
(transform_ip_1), (set_caps_1), (gst_basetransform_suite):
Add some test basetransform element and the beginnings of various
unit tests for it.
2008-06-20 12:06:54 +00:00
Stefan Kost
e5c981bb7b Ignore more.
Original commit message from CVS:
* docs/plugins/tmpl/.cvsignore:
* tests/check/gst/.cvsignore:
Ignore more.
2008-06-20 08:21:48 +00:00
Stefan Kost
27243ac326 Rewrite handling of default values. Fix overflow with unsigned types in linear interpolation. Remove now obsolete _fi...
Original commit message from CVS:
* libs/gst/controller/gstinterpolation.c:
* libs/gst/controller/gstinterpolationcontrolsource.c:
* tests/check/libs/controller.c:
Rewrite handling of default values. Fix overflow with unsigned types
in linear interpolation. Remove now obsolete _first_value() function.
Add more tests. Fixes #538201.
2008-06-20 08:17:08 +00:00
Stefan Kost
9b3b823aa5 tests/check/gst/gstpipeline.c: Revert test change and add comment why it should not work.
Original commit message from CVS:
* tests/check/gst/gstpipeline.c:
Revert test change and add comment why it should not work.
2008-05-27 19:47:49 +00:00
Stefan Kost
6bb62a810a tests/check/gst/gstpipeline.c: Extending the test a little to verify that we also get the NULL state- change message.
Original commit message from CVS:
* tests/check/gst/gstpipeline.c:
Extending the test a little to verify that we also get the NULL state-
change message.
2008-05-27 18:31:39 +00:00
Stefan Kost
bedb591973 configure.ac: Add DATADIR for storing presets.
Original commit message from CVS:
Patch by: Stefan Kost  <ensonic@users.sf.net>
* configure.ac:
Add DATADIR for storing presets.
* docs/gst/gstreamer-docs.sgml:
* docs/gst/gstreamer-sections.txt:
* docs/gst/gstreamer.types.in:
Add GstPreset to docs.
* gst/Makefile.am:
* gst/gst.h:
* gst/gstpreset.c: (preset_get_paths), (preset_skip_property),
(preset_open_and_parse_header), (preset_parse_version),
(preset_merge), (preset_get_keyfile),
(gst_preset_default_get_preset_names),
(gst_preset_default_get_property_names),
(gst_preset_default_load_preset),
(gst_preset_default_save_presets_file),
(gst_preset_default_save_preset),
(gst_preset_default_rename_preset),
(gst_preset_default_delete_preset), (gst_preset_default_set_meta),
(gst_preset_default_get_meta), (gst_preset_default_randomize),
(gst_preset_default_reset), (gst_preset_get_preset_names),
(gst_preset_get_property_names), (gst_preset_load_preset),
(gst_preset_save_preset), (gst_preset_rename_preset),
(gst_preset_delete_preset), (gst_preset_set_meta),
(gst_preset_get_meta), (gst_preset_class_init),
(gst_preset_base_init), (gst_preset_get_type):
* gst/gstpreset.h:
Add GstPreset to core. Fixes #396779
* tests/check/Makefile.am:
* tests/check/gst/gstpreset.c: (gst_preset_test_get_property),
(gst_preset_test_set_property), (gst_preset_test_class_init),
(gst_preset_test_base_init), (gst_preset_test_get_type),
(gst_preset_test_plugin_init), (GST_START_TEST),
(remove_preset_file), (test_setup), (test_teardown),
(gst_preset_suite):
Add GstPreset unit tests.
2008-05-27 15:11:35 +00:00
Tim-Philipp Müller
b0afa5e42e Get all missing elements from a parse launch string if possible (ie. if the FATAL_ERRORS flag has been specified). Fi...
Original commit message from CVS:
* gst/parse/grammar.y:
* tests/check/pipelines/parse-launch.c:
Get all missing elements from a parse launch string if possible
(ie. if the FATAL_ERRORS flag has been specified). Fixes #528178.
2008-05-25 13:56:38 +00:00
Tim-Philipp Müller
c7230d272a tests/check/: Add some unit tests for the new gst_parse_launch*_full() API. (Exposes a previously-existing memory lea...
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/pipelines/parse-launch.c:
Add some unit tests for the new gst_parse_launch*_full() API.
(Exposes a previously-existing memory leak in the error code
path, so adding to VALGRIND_TO_FIX for now).
2008-05-24 16:38:15 +00:00
Wim Taymans
cc8334905c Don't use gst_element_get_pad().
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_load_and_link):
* gst/gstutils.c: (gst_element_link_pads),
(gst_element_unlink_pads):
* libs/gst/check/gstcheck.c: (gst_check_setup_src_pad),
(gst_check_teardown_src_pad), (gst_check_setup_sink_pad),
(gst_check_teardown_sink_pad),
(gst_check_element_push_buffer_list):
* tests/check/elements/fakesink.c: (GST_START_TEST):
* tests/check/elements/filesink.c:
* tests/check/elements/filesrc.c: (GST_START_TEST):
* tests/check/elements/multiqueue.c: (setup_multiqueue),
(mq_sinkpad_to_srcpad):
* tests/check/elements/tee.c: (GST_START_TEST):
* tests/check/generic/sinks.c: (GST_START_TEST):
* tests/check/gst/gstbin.c: (GST_START_TEST):
* tests/check/gst/gstevent.c: (GST_START_TEST):
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
* tests/check/gst/gstpipeline.c: (GST_START_TEST):
* tests/check/gst/gstquery.c: (GST_START_TEST):
* tests/check/gst/gstutils.c: (GST_START_TEST):
* tests/check/libs/basesrc.c: (GST_START_TEST):
* tests/check/pipelines/parse-launch.c: (run_delayed_test),
(gst_parse_test_element_change_state):
Don't use gst_element_get_pad().
2008-05-21 15:57:52 +00:00
Tim-Philipp Müller
b1ea5f952f tests/check/gst/gstcaps.c: Add David's and Benjamin's tests for array subtraction to the unit test suite, which sugge...
Original commit message from CVS:
* tests/check/gst/gstcaps.c: (test_intersect2), (gst_caps_suite):
Add David's and Benjamin's tests for array subtraction to the
unit test suite, which suggests that #147931 is fixed these days.
2008-05-18 11:52:39 +00:00
Stefan Kost
7e6dd77041 tests/check/gst/gstinfo.c: Add a test for removing the default log handler. Seems to fail under windows.
Original commit message from CVS:
* tests/check/gst/gstinfo.c:
Add a test for removing the default log handler. Seems to fail under
windows.
2008-05-14 18:09:01 +00:00
Wim Taymans
363148faf4 gst/parse/grammar.y: Remove unneeded value unset.
Original commit message from CVS:
* gst/parse/grammar.y:
Remove unneeded value unset.
* tests/check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
Add unit test for de/serialization of caps.
2008-05-14 10:22:17 +00:00
Tim-Philipp Müller
077450a434 No, let's not use g_slice_{dup|copy} here, since they only exist since GLib 2.14 and we still depend only on >= 2.12....
Original commit message from CVS:
* gst/gstsegment.c:
* tests/check/gst/gstsegment.c:
No, let's not use g_slice_{dup|copy} here, since they only exist
since GLib 2.14 and we still depend only on >= 2.12. Also add
unit test for gst_segment_copy().
2008-05-09 20:48:24 +00:00
Sebastian Dröge
a87948275c tests/check/gst/gstvalue.c: Add unit test for deserializing uint64s and check some really large numbers in the int64 ...
Original commit message from CVS:
* tests/check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
Add unit test for deserializing uint64s and check some really large
numbers in the int64 test.
2008-05-05 15:50:36 +00:00
Tim-Philipp Müller
449a426169 plugins/elements/gstqueue.c: Since we're not called only from the chain function any longer, we can't assume that the...
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_leak_downstream):
Since we're not called only from the chain function any longer,
we can't assume that there's always data in the queue, so move
the is_full check to the beginning of the loop (otherwise we'd
hit the assert when changing the limit properties while the
queue is empty or not running yet).
Also, only set a discont if items were actually removed from
the queue.
* tests/check/elements/queue.c: (test_leaky_downstream):
Test case for the above.
2008-04-30 14:20:48 +00:00
Wim Taymans
cf45b88349 Add method to conveniently check the name of a custom event with gst_event_has_name().
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstevent.c: (gst_event_has_name):
* gst/gstevent.h:
* tests/check/gst/gstevent.c: (GST_START_TEST):
Add method to conveniently check the name of a custom event with
gst_event_has_name().
Reformat the event docs so that related methods are put together instead
of the default alphabetical sort.
Update unit test with new method.
API: GstEvent::gst_event_has_name()
2008-04-29 11:23:51 +00:00
Tim-Philipp Müller
e46f846c1f Ref some more classes in gst_init() to work around thread-safety issues in pre-2.16 GLibs, and add basic unit test.
Original commit message from CVS:
* gst/gst.c: (init_post), (gst_deinit):
* tests/check/gst/gstpipeline.c: (GST_START_TEST), (pipeline_thread),
(test_concurrent_create), (gst_pipeline_suite):
Ref some more classes in gst_init() to work around thread-safety
issues in pre-2.16 GLibs, and add basic unit test.
2008-04-25 10:01:46 +00:00
Stefan Kost
012d5584ff docs/gst/gstreamer-sections.txt: Move GParamSepc macros to standart section.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Move GParamSepc macros to standart section.
* gst/gstbin.c:
Dn't document _get_type - its in private section in docs anyway and
this doc-blob was incomplete.
* gst/gstclock.h:
Fix wrong symbol names in docs.
* gst/gstmacros.h:
Add once doc sentence.
* tests/check/gst/.cvsignore:
Ignore more.
2008-04-23 06:57:30 +00:00
Rene Stadler
9530644a17 gst/gsttagsetter.c: Merging an empty list with another list in KEEP_ALL mode should yield an empty list as result and...
Original commit message from CVS:
Patch by: Rene Stadler <mail at renestadler de>
* gst/gsttagsetter.c: (gst_tag_setter_merge_tags):
Merging an empty list with another list in KEEP_ALL mode should
yield an empty list as result and not the second list (#512578).
* tests/check/gst/gsttagsetter.c:
Add unit test for tag merge modes and the aforementioned bug.
2008-04-13 19:58:43 +00:00
José Alburquerque
f273ee8c4b Add gst_pad_add_*_probe_full() functions with a notify callback that lets the caller free the data it passes to the p...
Original commit message from CVS:
Based on patch by: José Alburquerque <jaalburqu at svn dot gnome dot org>
* gst/gstutils.c: (gst_pad_add_data_probe),
(gst_pad_add_data_probe_full), (gst_pad_add_event_probe),
(gst_pad_add_event_probe_full), (gst_pad_add_buffer_probe),
(gst_pad_add_buffer_probe_full):
* gst/gstutils.h:
* docs/gst/gstreamer-sections.txt:
* win32/common/libgstreamer.def:
Add gst_pad_add_*_probe_full() functions with a notify callback that
lets the caller free the data it passes to the probe functions. This
is useful for bindings such as gst-python or gstreamermm (#526814).
API: gst_pad_add_data_probe_full
API: gst_pad_add_buffer_probe_full
API: gst_pad_add_event_probe_full
* tests/check/gst/gstutils.c:
Add minimal unit test to make sure freeing the data actually works
as expected.
* tests/benchmarks/.cvsignore:
Random cvsignore addendum.
2008-04-10 20:46:51 +00:00
Tim-Philipp Müller
ede8ee12bb gst/gstindex.*: Don't free key strings which we don't own. Fixes crash in gst_index_entry_free() (#522741).
Original commit message from CVS:
* gst/gstindex.c: (gst_index_entry_free):
* gst/gstindex.h:
Don't free key strings which we don't own. Fixes crash in
gst_index_entry_free() (#522741).
* tests/check/Makefile.am:
* tests/check/gst/.cvsignore:
* tests/check/gst/gstindex.c: (test_index_entries),
(gst_index_suite), (gst_index):
Add unit test for the above.
2008-03-17 10:21:59 +00:00
Ole André Vadla Ravnås
8a6042989a Remove GstPollMode from the API, it does not make sense to let the application control this.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås
<ole dot andre dot ravnas at tandberg dot com>
* docs/gst/gstreamer-sections.txt:
* gst/gstpoll.c: (find_index), (gst_poll_free_winsock_event),
(gst_poll_update_winsock_event_mask), (gst_poll_new),
(gst_poll_free), (gst_poll_fd_init), (gst_poll_add_fd_unlocked),
(gst_poll_remove_fd), (gst_poll_fd_ctl_write),
(gst_poll_fd_ctl_read_unlocked), (gst_poll_fd_has_closed),
(gst_poll_fd_has_error), (gst_poll_fd_can_read_unlocked),
(gst_poll_fd_can_write), (gst_poll_wait),
(gst_poll_set_controllable), (gst_poll_restart),
(gst_poll_set_flushing):
* gst/gstpoll.h:
* libs/gst/net/gstnetclientclock.c: (gst_net_client_clock_new):
* libs/gst/net/gstnettimeprovider.c: (gst_net_time_provider_start),
(gst_net_time_provider_new):
* plugins/elements/gstfdsink.c: (gst_fd_sink_start):
* plugins/elements/gstfdsrc.c: (gst_fd_src_start):
* tests/benchmarks/gstpollstress.c: (main):
* tests/check/gst/gstpoll.c: (GST_START_TEST), (gst_poll_suite):
Remove GstPollMode from the API, it does not make sense to let the
application control this.
Add support for Win32.
Fix the testsuite. Fixes #520671.
2008-03-07 15:39:45 +00:00
Andy Wingo
391d9dfc9e tests/check/gst/gststructure.c (GST_START_TEST): Add a check for the new warning.
Original commit message from CVS:

2008-03-03  Andy Wingo  <wingo@pobox.com>

* tests/check/gst/gststructure.c (GST_START_TEST): Add a check for
the new warning.

* gst/gststructure.c (gst_structure_from_string): Warn if
structure_from_string didn't consume the whole string, but the
caller did not provide an end pointer.
2008-03-03 10:07:21 +00:00
Tim-Philipp Müller
97bf2d2d78 gst/gstinterface.c: Don't crash if the element supports the interface queried, but does not implement GstImplementsIn...
Original commit message from CVS:
* gst/gstinterface.c: (gst_element_implements_interface):
Don't crash if the element supports the interface queried, but does
not implement GstImplementsInterface. Fixes #519584.
* tests/check/Makefile.am:
* tests/check/gst/.cvsignore:
* tests/check/gst/gstinterface.c:
Add unit test for the above.
2008-02-29 18:38:54 +00:00
Sebastian Dröge
58cc2ede0a And correct even more valid sparse warnings.
Original commit message from CVS:
* gst/gstelementfactory.h:
* tests/check/elements/fakesink.c:
* tests/check/elements/fakesrc.c: (setup_fakesrc):
* tests/check/elements/fdsrc.c: (setup_fdsrc):
* tests/check/elements/filesink.c: (setup_filesink):
* tests/check/elements/filesrc.c: (setup_filesrc):
* tests/check/elements/identity.c: (setup_identity):
* tests/check/elements/tee.c:
* tests/check/generic/sinks.c:
* tests/check/generic/states.c: (setup), (teardown):
* tests/check/gst/gst.c:
* tests/check/gst/gstabi.c:
* tests/check/gst/gstbin.c:
* tests/check/gst/gstbus.c: (pull_messages):
* tests/check/gst/gstcaps.c:
* tests/check/gst/gstelement.c:
* tests/check/gst/gstevent.c:
* tests/check/gst/gstghostpad.c:
* tests/check/gst/gstiterator.c:
* tests/check/gst/gstmessage.c:
* tests/check/gst/gstminiobject.c: (my_foo_init):
* tests/check/gst/gstobject.c: (thread_name_object),
(gst_object_suite):
* tests/check/gst/gstpad.c:
* tests/check/gst/gstplugin.c:
* tests/check/gst/gstpoll.c:
* tests/check/gst/gstquery.c:
* tests/check/gst/gstsegment.c:
* tests/check/gst/gststructure.c:
* tests/check/gst/gstsystemclock.c:
* tests/check/gst/gsttask.c:
* tests/check/gst/gstutils.c:
* tests/check/gst/gstvalue.c:
* tests/check/gst/struct_hppa.h:
* tests/check/gst/struct_i386.h:
* tests/check/gst/struct_ppc32.h:
* tests/check/gst/struct_ppc64.h:
* tests/check/gst/struct_x86_64.h:
* tests/check/libs/adapter.c: (create_and_fill_adapter):
* tests/check/libs/basesrc.c:
* tests/check/libs/controller.c: (GST_START_TEST):
* tests/check/libs/gdp.c:
* tests/check/libs/gstnetclientclock.c:
* tests/check/libs/gstnettimeprovider.c:
* tests/check/libs/libsabi.c:
* tests/check/libs/struct_hppa.h:
* tests/check/libs/struct_i386.h:
* tests/check/libs/struct_ppc32.h:
* tests/check/libs/struct_ppc64.h:
* tests/check/libs/struct_x86_64.h:
* tests/check/pipelines/cleanup.c:
* tests/check/pipelines/simple-launch-lines.c:
* tests/check/pipelines/stress.c:
And correct even more valid sparse warnings.
* win32/common/libgstreamer.def:
Add gst_poll_fd_init to the list of symbols.
2008-02-29 13:59:24 +00:00
Sebastian Dröge
b997b0545a Correct all relevant warnings found by the sparse semantic code analyzer. This include marking several symbols static...
Original commit message from CVS:
* gst/gstconfig.h.in:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_read_buffer):
* libs/gst/check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_drop_buffers),
(gst_check_element_push_buffer_list):
* libs/gst/controller/gstcontroller.c: (gst_controller_get),
(gst_controller_get_type):
* libs/gst/controller/gsthelper.c: (gst_object_control_properties),
(gst_object_get_controller), (gst_object_get_control_source):
* libs/gst/controller/gstinterpolationcontrolsource.c:
(gst_interpolation_control_source_new):
* libs/gst/controller/gstlfocontrolsource.c:
(gst_lfo_control_source_new):
* libs/gst/dataprotocol/dataprotocol.c:
(gst_dp_event_from_packet_0_2):
* plugins/elements/gstfdsrc.c:
* plugins/elements/gstmultiqueue.c:
* plugins/elements/gsttee.c:
* plugins/elements/gsttypefindelement.c:
* plugins/indexers/gstfileindex.c: (_file_index_id_save_xml),
(gst_file_index_add_association):
* plugins/indexers/gstmemindex.c:
* tests/benchmarks/gstpollstress.c: (mess_some_more):
* tests/check/elements/queue.c: (setup_queue):
* tests/check/gst/gstpipeline.c:
* tests/check/libs/collectpads.c: (setup), (teardown),
(gst_collect_pads_suite):
* tests/examples/adapter/adapter_test.c:
* tests/examples/metadata/read-metadata.c: (make_pipeline):
* tests/examples/xml/createxml.c:
* tests/examples/xml/runxml.c:
* tools/gst-inspect.c:
* tools/gst-run.c:
Correct all relevant warnings found by the sparse semantic code
analyzer. This include marking several symbols static, using
NULL instead of 0 for pointers, not using variable sized arrays
on the stack, moving variable declarations to the beginning of
a block and using "foo (void)" instead of "foo ()" for declarations.
2008-02-29 12:41:33 +00:00
Sebastian Dröge
c483eb5489 plugins/elements/: Don't reset GstPollFDs, this is not necessary at all.
Original commit message from CVS:
* plugins/elements/gstfdsink.c: (gst_fd_sink_update_fd):
* plugins/elements/gstfdsrc.c: (gst_fd_src_update_fd):
Don't reset GstPollFDs, this is not necessary at all.
* tests/check/gst/gstpoll.c: (test_poll_wait), (GST_START_TEST),
(delayed_restart), (delayed_control):
Use GST_POLL_FD_INIT.
2008-02-29 12:05:55 +00:00
Sebastian Dröge
4c31dc7cc4 Initialize some uninitialized variables as spotted by valgrind.
Original commit message from CVS:
* plugins/elements/gstfdsink.c: (gst_fd_sink_start),
(gst_fd_sink_update_fd):
* plugins/elements/gstfdsrc.c: (gst_fd_src_update_fd):
* tests/check/gst/gstpoll.c: (test_poll_wait), (GST_START_TEST),
(delayed_restart), (delayed_control):
Initialize some uninitialized variables as spotted by valgrind.
2008-02-28 19:58:26 +00:00
Wim Taymans
d37ee60f47 configure.ac: Add checks for poll, ppoll and pselect.
Original commit message from CVS:
* configure.ac:
Add checks for poll, ppoll and pselect.
* docs/gst/gstreamer-docs.sgml:
* docs/gst/gstreamer-sections.txt:
Add docs for GstPoll.
* gst/Makefile.am:
* gst/gst.h:
* gst/gstpoll.c: (find_index), (selectable_fds),
(pollable_timeout), (choose_mode), (pollfd_to_fd_set),
(fd_set_to_pollfd), (gst_poll_new), (gst_poll_free),
(gst_poll_set_mode), (gst_poll_get_mode),
(gst_poll_add_fd_unlocked), (gst_poll_add_fd),
(gst_poll_remove_fd), (gst_poll_fd_ctl_write),
(gst_poll_fd_ctl_read_unlocked), (gst_poll_fd_ctl_read),
(gst_poll_fd_has_closed), (gst_poll_fd_has_error),
(gst_poll_fd_can_read_unlocked), (gst_poll_fd_can_read),
(gst_poll_fd_can_write), (gst_poll_wait),
(gst_poll_set_controllable), (gst_poll_restart),
(gst_poll_set_flushing):
* gst/gstpoll.h:
Add generic poll abstraction. We ideally don't want to have this in core
here but in glib intead...
This code will be used in various network elements and ultimately for
the nanosecond precision monotonic clock (that's why it's here in core).
It'll allow us to implement cancelable socket operations for windows too.
* tests/check/Makefile.am:
* tests/check/gst/gstpoll.c: (test_poll_wait), (GST_START_TEST),
(delayed_stop), (delayed_restart), (delayed_flush),
(delayed_control), (gst_poll_suite):
Add GstPoll unit test.
2008-02-27 18:00:04 +00:00
Stefan Kost
3060854ebb tests/check/gst/gstevent.c: Add qos to the event test. Rename tcase/tsuite; is not only about custom events.
Original commit message from CVS:
* tests/check/gst/gstevent.c:
Add qos to the event test. Rename tcase/tsuite; is not only about
custom events.
2008-02-21 10:30:50 +00:00
Jan Schmidt
4643cb6d6d libs/gst/check/gstcheck.*: Make the declaration in the header for gst_check_element_push_buffer_list match the implem...
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_drop_buffers),
(gst_check_element_push_buffer_list):
* libs/gst/check/gstcheck.h:
Make the declaration in the header for
gst_check_element_push_buffer_list match the implementation.
Fix up spelling, grammar and wording of the documentation in a few
places, and add the Since keyword to new API functions.
Use g_list_delete_link instead of g_list_remove in
gst_check_drop_buffers, since it's immeasurably more efficient.
* tests/check/elements/fakesrc.c: (GST_START_TEST):
Use new gst_check_drop_buffers function where appropriate.
* win32/common/libgstbase.def:
* win32/common/libgstreamer.def:
Add new symbols gst_collect_pads_take_buffer,
gst_collect_pads_read_buffer, gst_index_set_resolver_full to the
exports
Changelog surgery to add API keyword to new gst_check API.
2008-02-19 12:56:28 +00:00
Sebastian Dröge
2faa733276 Revert previous changes to the behaviour of GstPadTemplates, etc and the possiblity to call them in class_init as it ...
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_get_type), (gst_bin_base_init),
(gst_bin_class_init):
* gst/gstelement.c: (gst_element_base_class_init),
(gst_element_class_add_pad_template):
* gst/gstpadtemplate.c: (gst_pad_template_init):
* gst/gstpipeline.c: (gst_pipeline_get_type),
(gst_pipeline_base_init), (gst_pipeline_class_init):
* libs/gst/base/gstbasesink.c:
* libs/gst/base/gstbasesrc.c: (gst_base_src_get_type),
(gst_base_src_base_init), (gst_base_src_class_init):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_base_init),
(gst_capsfilter_class_init):
* plugins/elements/gstfakesink.c: (gst_fake_sink_base_init),
(gst_fake_sink_class_init):
* plugins/elements/gstfakesrc.c: (gst_fake_src_base_init),
(gst_fake_src_class_init):
* plugins/elements/gstfdsink.c: (gst_fd_sink_base_init),
(gst_fd_sink_class_init):
* plugins/elements/gstfdsrc.c: (gst_fd_src_base_init),
(gst_fd_src_class_init):
* plugins/elements/gstfilesink.c: (gst_file_sink_base_init),
(gst_file_sink_class_init):
* plugins/elements/gstfilesrc.c: (gst_file_src_base_init),
(gst_file_src_class_init):
* plugins/elements/gstidentity.c: (gst_identity_base_init),
(gst_identity_class_init):
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_base_init),
(gst_multi_queue_class_init):
* plugins/elements/gstqueue.c: (gst_queue_base_init),
(gst_queue_class_init):
* plugins/elements/gsttee.c: (gst_tee_base_init),
(gst_tee_class_init):
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_base_init),
(gst_type_find_element_class_init):
* tests/check/gst/gstelement.c: (gst_element_suite):
Revert previous changes to the behaviour of GstPadTemplates, etc
and the possiblity to call them in class_init as it breaks too
many elements. Reopens bug #491501.
Should be applied again for 0.11, thus added a few FIXME 0.11 at
several places.
2008-02-05 14:15:15 +00:00
Thijs Vermeir
bb3dfba3f5 Be sure that we have a new copy of the caps and not reffed caps from a template
Original commit message from CVS:
* gst/gstpad.c:
* tests/check/gst/gstpad.c:
Be sure that we have a new copy of the caps and not
reffed caps from a template
2008-02-04 14:14:42 +00:00
Sebastian Dröge
86e45df860 gst/: Make it possible (and recommended) to set element details and add pad templates in the class_init functions by ...
Original commit message from CVS:
* gst/gstelement.c: (gst_element_base_class_init),
(gst_element_class_add_pad_template):
* gst/gstpadtemplate.c:
Make it possible (and recommended) to set element details and add
pad templates in the class_init functions by copying the details/pad
templates in GstElement's base_init.
Also make it possible to replace existing pad templates by adding
a new one with the same name. This was done in a hackish fashion
in same elements before already.
Don't reference pad templates that are added a second time. A
new pad template has a refcount of one and is not floating anymore
and to be owned by the element's class. Make this more explicit by
mentioning it in the docs of gst_element_class_add_pad_template().
These changes are backwards compatible. Fixes bug #491501.
* tests/check/gst/gstelement.c:
Add unit test for setting element details, adding pad templates and
replacing them in a subclass.
2008-02-03 10:48:01 +00:00
Tim-Philipp Müller
22cf61b56e gst/gstplugin.c: Fix old-style static plugins via GST_PLUGIN_DEFINE_STATIC again, which I broke two commits ago when ...
Original commit message from CVS:
* gst/gstplugin.c: (_gst_plugin_initialize):
Fix old-style static plugins via GST_PLUGIN_DEFINE_STATIC
again, which I broke two commits ago when changing the API
of gst_plugin_register_static(): the g_list_foreach() in
_gst_plugin_register_static still assumed the old function
signature and would therefore fail (re-fixes #510187).
* gst/gstplugin.c: (_num_static_plugins), (_static_plugins),
(_gst_plugin_register_static), (gst_plugin_register_static):
Revert the (technically correct) change to call g_thread_init() from
the pre-main() constructor. This will break programs which call
g_thread_init() without an if (!g_thread_supported()) guard in their
main function. We could just blame it on GLib or the application, but
it's probably best to just avoid this altogether and simply not use
any GLib functions here and use plain old malloc() with a simple
array to store the plugins to register later when gst_init() is
finally called (re-fixes #510187).
* tests/check/gst/gstplugin.c: (GST_GNUC_CONSTRUCTOR_DEFINED),
(GST_GNUC_CONSTRUCTOR_DEFINED), (plugin_init_counter),
(plugin1_init), (plugin2_init), (plugin3_init), (GST_START_TEST),
(GST_START_TEST), (gst_plugin_suite):
Dumb unit test to make sure the old GST_PLUGIN_DEFINE_STATIC still
works.
2008-01-20 15:04:33 +00:00
Tim-Philipp Müller
33cd142292 gst/: Change API of gst_plugin_register_static() to not take a GstPluginDesc, but rather just take all the arguments ...
Original commit message from CVS:
* gst/gst.c: (init_post):
* gst/gstplugin.c: (_gst_plugin_register_static),
(gst_plugin_register_static), (_gst_plugin_initialize):
* gst/gstplugin.h: (GstPluginFilter):
Change API of gst_plugin_register_static() to not take
a GstPluginDesc, but rather just take all the arguments
in a GstPluginDesc directly. This is more intuitive and
avoids certain mistakes when porting code from
GST_PLUGIN_DEFINE_STATIC to gst_plugin_register_static().
Fixes #510187.
* tests/check/gst/gstplugin.c:
Fix up for changed API.
2008-01-17 22:17:15 +00:00
Jan Schmidt
f2c36159ef gst/gst.c: _gst_trace_on is already provided by gsttrace.h, no need to declare it ourselves.
Original commit message from CVS:
* gst/gst.c:
_gst_trace_on is already provided by gsttrace.h, no need to declare
it ourselves.
* docs/libs/gstreamer-libs-sections.txt:
Add 'buffers', 'check_cond' and 'check_mutex' from libgstcheck
and remove strange tcase_add_test which is outputting a warning.
* libs/gst/check/gstcheck.c:
* libs/gst/check/gstcheck.h:
Properly declare 'buffers', 'check_cond', 'check_mutex' extern
and define them in gstcheck.c instead of having every .c file whcih
includes gstcheck.h be defining its own copy and relying on symbol
interposing to marry them all, which doesn't work on Solaris.
* tests/check/elements/identity.c: (GST_START_TEST):
Don't define 'buffers' locally, it comes from libgstcheck.
* tests/check/generic/sinks.c: (send_buffer):
Fix type of variable (GstFlowReturn, not GstStateChangeReturn)
* tests/check/gst/gststructure.c: (GST_START_TEST):
* tests/check/gst/gstsystemclock.c: (GST_START_TEST):
* tests/check/gst/gstutils.c: (GST_START_TEST):
* tests/check/gst/gstvalue.c: (GST_START_TEST):
Add a bunch of casts to make various constants fit the types
they're being assigned to.
2008-01-12 20:22:30 +00:00
Tim-Philipp Müller
4a3f163052 API: add gst_plugin_register_static() and deprecate
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gst.c: (init_post):
* gst/gstplugin.c: (_gst_plugin_register_static),
(gst_plugin_register_static), (_gst_plugin_initialize),
(gst_plugin_register_func):
* gst/gstplugin.h: (GST_PLUGIN_DEFINE_STATIC):
API: add gst_plugin_register_static() and deprecate
GST_PLUGIN_DEFINE_STATIC, since it's not portable
(#498924).
Also, in _gst_plugin_register_static(), make sure to call
g_thread_init() before calling GLib functions such as
g_list_append() if we're not initialised yet, since that
may lead to random crashes with older GSlice/GLib versions.
* tests/check/gst/gstplugin.c:
Adapt unit test to above changes.
2008-01-09 18:23:39 +00:00
Wim Taymans
f473d72719 libs/gst/base/gstbasesrc.c: Don't update the last_stop position in do_seek, that's the position we did a seek to.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_default_do_seek),
(gst_base_src_loop):
Don't update the last_stop position in do_seek, that's the position we
did a seek to.
Read backwards when we have a negative rate.
* tests/check/elements/filesrc.c: (event_func), (wait_eos),
(setup_filesrc), (cleanup_filesrc), (GST_START_TEST),
(filesrc_suite):
Add check for reverse reading.
2008-01-07 11:23:00 +00:00
Alexis Ballier
91a59d5af5 tests/check/: Decide which header to include based on the userland ABI target and not the kernel/cpu. Fix up structur...
Original commit message from CVS:
Patch by: Alexis Ballier <aballier at gentoo org>
* tests/check/gst/gstabi.c:
* tests/check/gst/struct_ppc64.h:
* tests/check/libs/libsabi.c:
* tests/check/libs/struct_ppc64.h:
Decide which header to include based on the userland ABI target
and not the kernel/cpu. Fix up structure sizes of ppc64 header
for 64-bit userland (#503590).  Might need something similar for
x86 too.
2008-01-07 09:47:49 +00:00
Tim-Philipp Müller
34cdb9b9d2 tests/check/generic/sinks.c: Put back the tcase_set_timeout(), apparently it's needed after all; fix it up in a way t...
Original commit message from CVS:
* tests/check/generic/sinks.c: (gst_sinks_suite):
Put back the tcase_set_timeout(), apparently it's needed after
all; fix it up in a way that makes things work with valgrind too.
2007-12-30 13:31:17 +00:00
Tim-Philipp Müller
dd739adfa7 tests/check/generic/sinks.c: Fix leak in unit test (bus sync handler must unref the message if it returns GST_BUS_DRO...
Original commit message from CVS:
* tests/check/generic/sinks.c: (async_done_func),
(async_done_eos_func):
Fix leak in unit test (bus sync handler must unref the message
if it returns GST_BUS_DROP). Don't fiddle with the default test
timeout, this is smaller than the current preconfigured value
via CK_DEFAULT_TIMEOUT, and also breaks things with valgrind
because it overrides the value specified in CK_DEFAULT_TIMEOUT.
2007-12-28 13:57:05 +00:00
Tim-Philipp Müller
55d6032d53 tests/check/: Don't use GST_PLUGIN_DEFINE_STATIC, it is not portable and is going to be deprecated (see #498924).
Original commit message from CVS:
* tests/check/libs/controller.c:
* tests/check/libs/typefindhelper.c:
* tests/check/pipelines/parse-launch.c:
Don't use GST_PLUGIN_DEFINE_STATIC, it is not portable and is
going to be deprecated (see #498924).
2007-12-21 21:17:32 +00:00
Wim Taymans
96d28a501f gst/gstpad.c: Really unlink the peer pad instead of setting the peer pointer to NULL when we dispose the pad.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_dispose):
Really unlink the peer pad instead of setting the peer pointer to NULL
when we dispose the pad.
This correctly calls the unlink functions and makes sure that the peer
does not have a handle to invalid memory. See #504671.
* tests/check/gst/gstpad.c: (GST_START_TEST), (gst_pad_suite):
Add testsuite for above case.
2007-12-21 13:54:07 +00:00
Wim Taymans
b0076d395d libs/gst/base/gstbasesrc.c: Allow sending EOS to the source to make it send out an EOS event from the streaming thread.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_send_event),
(gst_base_src_get_range), (gst_base_src_pad_get_range),
(gst_base_src_loop), (gst_base_src_set_flushing),
(gst_base_src_change_state):
Allow sending EOS to the source to make it send out an EOS event from
the streaming thread.
Update docs and deprecate the old NULL/READY shutdown method.
* tests/check/libs/basesrc.c: (GST_START_TEST),
(gst_basesrc_suite):
Add unit test for controlled shutdown.
2007-12-19 17:49:38 +00:00
Wim Taymans
a332964e6c docs/design/part-synchronisation.txt: Small updates.
Original commit message from CVS:
* docs/design/part-synchronisation.txt:
Small updates.
* gst/gstsegment.c: (gst_segment_set_seek),
(gst_segment_set_newsegment_full), (gst_segment_to_stream_time),
(gst_segment_to_running_time):
The seek format can be different from the segment format when the start
and stop values are not to be updated, when we only do a rate change for
example.
* tests/check/gst/gstsegment.c: (GST_START_TEST),
(gst_segment_suite):
Add a testcase for the rate-only seeks, checking that the format is
correctly ignored when start and stop are not updated.
2007-12-19 12:48:18 +00:00
Stefan Kost
42e6f9e77c tests/check/gst/gstbin.c: Adjust the test to the refcount change two days ago.
Original commit message from CVS:
* tests/check/gst/gstbin.c:
Adjust the test to the refcount change two days ago.
2007-12-15 14:42:25 +00:00
Tim-Philipp Müller
cf86e1a0a0 gst/gststructure.c: Don't crash in _from_string() if the structure name is not valid (fixes #501560). Allow structur...
Original commit message from CVS:
* gst/gststructure.c: (gst_structure_validate_name),
(gst_structure_new_valist), (gst_structure_parse_value),
(gst_structure_from_string):
Don't crash in _from_string() if the structure name is not valid
(fixes #501560).  Allow structure names to start with a number
again (this apparently broke the ubuntu codec installer).
* tests/check/gst/gststructure.c: (GST_START_TEST), (GST_START_TEST),
(GST_START_TEST):
Add unit test for the crash; update unit tests for new behaviour.
2007-12-08 12:54:53 +00:00
Sebastian Dröge
3d4291cca0 tests/check/Makefile.am: Don't forget to dist {gst,libs}/struct_hppa.h.
Original commit message from CVS:
* tests/check/Makefile.am:
Don't forget to dist {gst,libs}/struct_hppa.h.
2007-12-02 20:33:49 +00:00
Wim Taymans
0e0caaf16a Start merging in the easy bits of #361155, the monotonic clock patch.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstclock.h:
* tests/check/gst/gstsystemclock.c: (GST_START_TEST),
(gst_systemclock_suite):
Start merging in the easy bits of #361155, the monotonic clock patch.
This one adds a few handy macros with docs and a testsuite.
2007-11-28 10:58:39 +00:00
Stefan Kost
d8e77f9bf8 gst/gstevent.c: Little documentation improvment.
Original commit message from CVS:
* gst/gstevent.c:
Little documentation improvment.
* gst/gstpreset.c:
More TODO cleanups. Remove c++ comments.
* libs/gst/controller/gstcontroller.c:
Add TODO and use quark from static string.
* tests/check/gst/gstmessage.c:
* tests/check/gst/gststructure.c:
Use quark from static string.
2007-11-17 17:50:21 +00:00
Wim Taymans
c28238d8fe gst/gstsegment.c: Also accumulate time correctly when doing reverse playback. Fixes #488201,
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_newsegment_full),
(gst_segment_to_stream_time), (gst_segment_to_running_time):
Also accumulate time correctly when doing reverse playback. Fixes
#488201,
When converting to running and stream time, use default values for
start/stop/time/accum when comparing different formats. Fixes #494245.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times):
Do running/stream time in TIME format.
* tests/check/gst/gstsegment.c: (GST_START_TEST),
(gst_segment_suite):
2 new unit tests for segment accumulation.
2007-11-09 11:56:41 +00:00
Wim Taymans
9e50fa303e libs/gst/base/gstbasesink.c: Don't try to report a 0 position when we don't know, return -1 and FALSE instead. This m...
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_do_sync), (gst_base_sink_preroll_object),
(gst_base_sink_event), (gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_get_position),
(gst_base_sink_change_state):
Don't try to report a 0 position when we don't know, return -1 and FALSE
instead. This mostly happens when we are prerolling.
Make sure we can report the right position before we post the ASYNC_DONE
message so that a message handler can query position without races.
* tests/check/generic/sinks.c: (send_eos), (GST_START_TEST),
(async_done_handoff), (async_done_func), (send_buffer),
(async_done_eos_func), (gst_sinks_suite):
Add two tests for the above.
2007-11-06 10:33:22 +00:00
Jan Schmidt
b1ad4a6772 tests/check/gst/gstobject.c: Disable silly racy test that always fails on this combination of CPU and kernel.
Original commit message from CVS:
* tests/check/gst/gstobject.c:
Disable silly racy test that always fails on this combination of CPU
and kernel.
2007-11-06 00:59:54 +00:00
Tim-Philipp Müller
56d428073e tests/check/elements/tee.c: Simplify, simplify, simplify - or not. Rewrite unit test not to use gst_parse_launch(); ...
Original commit message from CVS:
* tests/check/elements/tee.c: (test_num_buffers):
Simplify, simplify, simplify - or not.  Rewrite unit test
not to use gst_parse_launch(); allow N sub-streams. Increasing
the number of sub-streams seems to reproduce #474823 more easily.
2007-11-01 19:19:10 +00:00
Jan Schmidt
f37e97764b plugins/elements/gstmultiqueue.c: Make it so that pads are considered linked until a buffer is pushed and discovered ...
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_set_property),
(gst_multi_queue_request_new_pad), (gst_single_queue_flush),
(gst_multi_queue_loop), (gst_multi_queue_sink_activate_push):
Make it so that pads are considered linked until a buffer is pushed
and discovered otherwise. This avoids problems with decodebin2 hanging
after a seek in the filesrc ! decodebin2 name=d ! fakesink d. ! fakesink
case.
Make sure we lock the multiqueue when updating the max-size properties.
Fix a crash on Solaris in a debug statement in get_request_pad that
passes a NULL string to GST_DEBUG.
* tests/check/elements/multiqueue.c: (mq_dummypad_chain),
(run_output_order_test):
Fix the test to allow the first buffer on not-linked pads to come out
of sequence while multiqueue discovers that they are not-linked.
2007-10-25 15:14:02 +00:00
Jan Schmidt
d7cbd5de33 Use a custom export symbol regex for libgstcheck, as it needs to export symbols that don't match the standard GStream...
Original commit message from CVS:
* configure.ac:
* libs/gst/check/Makefile.am:
Use a custom export symbol regex for libgstcheck, as it needs
to export symbols that don't match the standard GStreamer gst_*
pattern, and  --export-dynamic is not portable (only works on
GNU ld)
* libs/gst/check/gstcheck.c: (gst_check_setup_src_pad),
(gst_check_setup_sink_pad):
Make sure to pass a message parameter to the fail_* macros.
* tests/check/gst/gstinfo.c: (GST_START_TEST):
Fix some compiler warnings.
2007-10-25 14:50:48 +00:00
Tim-Philipp Müller
bff7cbd845 tests/check/gst/gststructure.c: Disable test that checks that white spaces are not allowed in structure names or fiel...
Original commit message from CVS:
* tests/check/gst/gststructure.c: (test_to_string):
Disable test that checks that white spaces are not allowed
in structure names or field names, since we need to
support that for now for backwards compatibility reasons.
2007-10-25 14:41:01 +00:00
Edgard Lima
0e3a0fdf35 Added GstStructure to gst_value_table and its related functions.
Original commit message from CVS:

* gst/gstcaps.c: (gst_caps_to_string),
(gst_caps_from_string_inplace):
* gst/gststructure.c: (gst_structure_get_abbrs),
(gst_structure_to_string), (gst_structure_from_string):
* gst/gstvalue.c: (gst_value_set_structure),
(gst_value_get_structure), (gst_value_serialize_structure),
(gst_value_deserialize_structure), (_gst_value_initialize):
* gst/gstvalue.h:
* tests/check/gst/gststructure.c: (GST_START_TEST),
(gst_structure_suite):
* tests/check/gst/gstvalue.c: (GST_START_TEST):
Added GstStructure to gst_value_table and its related functions.
Changed gst_structure_to_string to print ';' in the end.
Changed gst_caps_to_string to not print ';' beteween its
fields (structures) anymore and remove the lastes ';' from latest
structure. Now it is possible to have nested structures.
In addition, backward compatibilty is assured by accepting '\0' as
end delimiter. Fixes: #487969.
API: add gst_value_set_structure()
API: add gst_value_get_structure()
2007-10-22 08:53:26 +00:00
Tim-Philipp Müller
13c6e89d6c API: add gst_bus_pop_filtered
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstbus.c:
* gst/gstbus.h:
API: add gst_bus_pop_filtered
API: add gst_bus_timed_pop_filtered
Two new functions for waiting for specific message types on the
bus for a specified amount of time without iterating any main
loops or main contexts.
* tests/check/gst/gstbus.c:
Some tests for the new functions.
2007-10-16 20:30:13 +00:00
Stefan Kost
2b4644f737 Revert serialisation change and constrain structure-names after consensus on irc. Update api documentation to reflect...
Original commit message from CVS:
* gst/gststructure.c:
* tests/check/gst/gststructure.c:
Revert serialisation change and constrain structure-names after
consensus on irc. Update api documentation to reflect the change.
2007-10-16 13:58:43 +00:00
Stefan Kost
38cdd26ec8 gst/gststructure.c: Improve serialization and fix tests.
Original commit message from CVS:
* gst/gststructure.c:
Improve serialization and fix tests.
* tests/check/gst/gststructure.c:
Add another test that covers why I actually did the previous structure
change.
2007-10-16 06:32:07 +00:00
Tim-Philipp Müller
653cd3d701 tests/check/gst/gststructure.c: Add unit test for escaping of structure name when serialising and deserialising to/fr...
Original commit message from CVS:
* tests/check/gst/gststructure.c:
Add unit test for escaping of structure name when serialising
and deserialising to/from strings.
2007-10-15 11:58:16 +00:00
Wim Taymans
de5d9793d7 libs/gst/base/gstbasesink.c: When we received EOS and are waiting for when to post the EOS message, our state is prer...
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_preroll_queue_flush),
(gst_base_sink_queue_object_unlocked),
(gst_base_sink_queue_object), (gst_base_sink_event),
(gst_base_sink_needs_preroll), (gst_base_sink_chain_unlocked):
When we received EOS and are waiting for when to post the EOS message,
our state is prerolled and we should not return ASYNC.
Reorganize some code paths to implement this behavior.
* tests/check/generic/sinks.c: (send_eos), (GST_START_TEST),
(gst_sinks_suite):
Add unit test to verify above EOS fix.
2007-10-08 17:05:06 +00:00
Wim Taymans
a2e299f3ef tests/check/pipelines/simple-launch-lines.c: Fix compilation again.
Original commit message from CVS:
* tests/check/pipelines/simple-launch-lines.c: (run_pipeline):
Fix compilation again.
2007-10-05 11:52:39 +00:00
Stefan Kost
d53883c35e tests/check/pipelines/cleanup.c: Print message name and not just number.
Original commit message from CVS:
* tests/check/pipelines/cleanup.c:
Print message name and not just number.
2007-10-03 15:05:30 +00:00
Stefan Kost
de65ce3486 tests/check/pipelines/simple-launch-lines.c: Print message name and not just number.
Original commit message from CVS:
* tests/check/pipelines/simple-launch-lines.c:
Print message name and not just number.
2007-10-03 14:51:03 +00:00
Stefan Kost
1120543704 tests/check/generic/states.c: Improved state change unit test.
Original commit message from CVS:
* tests/check/generic/states.c:
Improved state change unit test.
2007-09-20 10:36:23 +00:00
Stefan Kost
0873492be6 gst/gstbin.h: Move priv to the right place.
Original commit message from CVS:
* gst/gstbin.h:
Move priv to the right place.
* gst/gstsystemclock.c:
Add FIXME: and improve log.
* tests/check/Makefile.am:
* tests/examples/manual/Makefile.am:
Work with all types of registries.
2007-09-20 07:42:35 +00:00
Sebastian Dröge
b598394d3b tests/check/libs/controller.c: Use fail_unless_equals_int(a, b) instead of fail_unless_equals (a == b) to get better ...
Original commit message from CVS:
* tests/check/libs/controller.c: (GST_START_TEST):
Use fail_unless_equals_int(a, b) instead of
fail_unless_equals (a == b) to get better output on failures.
2007-09-13 08:36:37 +00:00
Tim-Philipp Müller
362d7872dd tests/check/gst/gsturi.c: Also check for the other file URI variant on win32.
Original commit message from CVS:
* tests/check/gst/gsturi.c:
Also check for the other file URI variant on win32.
2007-09-12 16:35:48 +00:00
Tim-Philipp Müller
3f967a8b04 gst/gsturi.c: If there's no hostname, we want to return 'c:/foo/bar.txt' and not '/c:/foo/bar.txt' on Windows. Fixes ...
Original commit message from CVS:
* gst/gsturi.c: (gst_uri_get_location):
If there's no hostname, we want to return 'c:/foo/bar.txt'
and not '/c:/foo/bar.txt' on Windows. Fixes #469402.
* tests/check/gst/gsturi.c:
Unit test for the above and a few more things.
2007-09-12 12:36:51 +00:00
Stefan Kost
33f966fede tests/check/gst/gstsystemclock.c: Cleanup the test a little (use gst-logging and not g_message). Improve test to chec...
Original commit message from CVS:
* tests/check/gst/gstsystemclock.c:
Cleanup the test a little (use gst-logging and not g_message). Improve
test to check if a wait reached the target.
2007-09-11 13:43:53 +00:00
Wim Taymans
a0274c10a7 gst/gststructure.c: Fix fraction list fixation code. Take the fraction with the smallest difference with the target i...
Original commit message from CVS:
* gst/gststructure.c:
(gst_structure_fixate_field_nearest_fraction):
Fix fraction list fixation code. Take the fraction with the smallest
difference with the target instead of the first one in the list.
* tests/check/gst/gststructure.c: (GST_START_TEST),
(gst_structure_suite):
Added test to verify correct fraction list fixation behaviour.
2007-09-05 01:00:50 +00:00
Jan Schmidt
e2b34e1551 tests/check/gst/gstbin.c: Fix leaks in the new unit test.
Original commit message from CVS:
* tests/check/gst/gstbin.c: (GST_START_TEST):
Fix leaks in the new unit test.
2007-08-24 14:55:46 +00:00
Wim Taymans
ebf770154f gst/gstbin.c: Improve debugging.
Original commit message from CVS:
* gst/gstbin.c: (is_eos), (gst_bin_add_func),
(bin_handle_async_start), (gst_bin_handle_message_func):
Improve debugging.
When adding elements, insert messages into the bus of the newly added
element and make sure the element is the source of the message. This
allows the parent bin to intercept the message and do the
right thing. It also avoids us posting ASYNC_START and CLOCK_PROVIDE
messages to the app (which is not allowed).
Update some docs.
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
Fix testsuite so that is does not work around messages that should not
have been posted in the first place.
2007-08-16 11:04:40 +00:00
Wim Taymans
5059e9f8bd gst/gstbin.c: Fix annoying bug in the sorted iterator where a sink that is not really a sink (when it has downstream ...
Original commit message from CVS:
* gst/gstbin.c: (add_to_queue), (remove_from_queue), (clear_queue),
(update_degree), (gst_bin_sort_iterator_next):
Fix annoying bug in the sorted iterator where a sink that is not really
a sink (when it has downstream links) screwed up the iterator.
* tests/check/gst/gstbin.c: (GST_START_TEST), (gst_bin_suite):
Unit test to verify the fix.
2007-08-16 10:27:16 +00:00
Wim Taymans
9b24336ce5 gst/gstbin.c: Always change the state of a NO_PREROLL element even if it has ASYNC elements inside (in case of a bin).
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_element_set_state):
Always change the state of a NO_PREROLL element even if it has ASYNC
elements inside (in case of a bin).
* tests/check/generic/sinks.c: (GST_START_TEST), (gst_sinks_suite):
Unit test for this case.
2007-08-14 13:37:16 +00:00
Sebastian Dröge
b47469722f libs/gst/controller/: API: Add GstLFOControlSource, a control source that gives values for specific timestamps based ...
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* libs/gst/controller/Makefile.am:
* libs/gst/controller/gstlfocontrolsource.c: (_calculate_pos),
(gst_lfo_waveform_get_type), (gst_lfo_control_source_reset),
(gst_lfo_control_source_new),
(gst_lfo_control_source_set_waveform),
(gst_lfo_control_source_bind), (gst_lfo_control_source_init),
(gst_lfo_control_source_finalize),
(gst_lfo_control_source_dispose),
(gst_lfo_control_source_set_property),
(gst_lfo_control_source_get_property),
(gst_lfo_control_source_class_init):
* libs/gst/controller/gstlfocontrolsource.h:
* libs/gst/controller/gstlfocontrolsourceprivate.h:
API: Add GstLFOControlSource, a control source that gives values
for specific timestamps based on several periodic waveforms.
Fixes #459717.
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
* docs/libs/gstreamer-libs-docs.sgml:
* docs/libs/gstreamer-libs-sections.txt:
* docs/libs/gstreamer-libs.types:
Add documentation and unit tests for GstLFOControlSource.
2007-08-03 15:47:17 +00:00
Jan Schmidt
6dd78d6bed tests/check/elements/.cvsignore: Add file to cvsignore as commanded.
Original commit message from CVS:
* tests/check/elements/.cvsignore:
Add file to cvsignore as commanded.
2007-07-16 16:44:31 +00:00
Jan Schmidt
4fb00301dd tests/check/elements/multiqueue.c: Use a GStaticMutex to protect all cases where libcheck fail_if/fail_unless macros ...
Original commit message from CVS:
* tests/check/elements/multiqueue.c: (mq_dummypad_chain),
(mq_dummypad_event), (run_output_order_test):
Use a GStaticMutex to protect all cases where libcheck
fail_if/fail_unless macros might be called from multiple threads
simultaneously to avoid errors like:
"check_pack.c:107: :-1081725400:Bad message type arg"
2007-07-16 16:04:49 +00:00
Jan Schmidt
54eb646c3e tests/check/pipelines/stress.c: Make sure we set the pipeline back to the NULL state before dropping our final refere...
Original commit message from CVS:
* tests/check/pipelines/stress.c: (GST_START_TEST):
Make sure we set the pipeline back to the NULL state before
dropping our final reference.
2007-07-16 15:19:06 +00:00
Jan Schmidt
615cc36296 tests/check/elements/tee.c: Make the tee stress-test a little less stressful so it doesn't just time out on slow-mach...
Original commit message from CVS:
* tests/check/elements/tee.c: (GST_START_TEST):
Make the tee stress-test a little less stressful so it doesn't just
time out on slow-machines, and remove a small race when it's starting
up by adding a get_state() call.
2007-07-16 14:55:26 +00:00
Tim-Philipp Müller
cf8abdf3a3 gst/gststructure.c: When deserialising foo=bar without a type cast, check if it's a boolean before falling back to a ...
Original commit message from CVS:
* gst/gststructure.c: (gst_structure_parse_value):
When deserialising foo=bar without a type cast, check if it's a
boolean before falling back to a string type, otherwise things like
audiotestsrc ! audio/x-raw-int,signed=true ! fakesink won't work,
because the filtercaps end up having a signed=(string)true field,
which causes problems later when intersection caps.
* tests/check/gst/gststructure.c: (GST_START_TEST):
Add a unit test for this.
2007-07-08 14:11:53 +00:00
Sebastian Dröge
286cd75855 libs/gst/controller/: API: Refactor GstController into the core controller which can take a GstControlSource for prov...
Original commit message from CVS:
Reviewed by: Stefan Kost <ensonic@users.sf.net>
* libs/gst/controller/Makefile.am:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_add_interpolation_control_source),
(gst_controlled_property_new), (gst_controlled_property_free),
(gst_controller_find_controlled_property),
(gst_controller_new_valist), (gst_controller_new_list),
(gst_controller_new), (gst_controller_remove_properties_valist),
(gst_controller_remove_properties_list),
(gst_controller_remove_properties),
(gst_controller_set_property_disabled),
(gst_controller_set_disabled), (gst_controller_set_control_source),
(gst_controller_get_control_source), (gst_controller_get),
(gst_controller_sync_values), (gst_controller_get_value_array),
(_gst_controller_dispose), (gst_controller_get_type),
(gst_controlled_property_set_interpolation_mode),
(gst_controller_set), (gst_controller_set_from_list),
(gst_controller_unset), (gst_controller_unset_all),
(gst_controller_get_all), (gst_controller_set_interpolation_mode):
* libs/gst/controller/gstcontroller.h:
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstcontrolsource.c:
(gst_control_source_class_init), (gst_control_source_init),
(gst_control_source_get_value),
(gst_control_source_get_value_array), (gst_control_source_bind):
* libs/gst/controller/gstcontrolsource.h:
* libs/gst/controller/gsthelper.c: (gst_object_set_control_source),
(gst_object_get_control_source):
* libs/gst/controller/gstinterpolation.c:
(gst_interpolation_control_source_find_control_point_node),
(gst_interpolation_control_source_get_first_value),
(_interpolate_none_get), (interpolate_none_get),
(interpolate_none_get_boolean_value_array),
(interpolate_none_get_enum_value_array),
(interpolate_none_get_string_value_array),
(_interpolate_trigger_get), (interpolate_trigger_get),
(interpolate_trigger_get_boolean_value_array),
(interpolate_trigger_get_enum_value_array),
(interpolate_trigger_get_string_value_array):
* libs/gst/controller/gstinterpolationcontrolsource.c:
(gst_control_point_free), (gst_interpolation_control_source_reset),
(gst_interpolation_control_source_new),
(gst_interpolation_control_source_set_interpolation_mode),
(gst_interpolation_control_source_bind),
(gst_control_point_compare), (gst_control_point_find),
(gst_interpolation_control_source_set_internal),
(gst_interpolation_control_source_set),
(gst_interpolation_control_source_set_from_list),
(gst_interpolation_control_source_unset),
(gst_interpolation_control_source_unset_all),
(gst_interpolation_control_source_get_all),
(gst_interpolation_control_source_get_count),
(gst_interpolation_control_source_init),
(gst_interpolation_control_source_finalize),
(gst_interpolation_control_source_dispose),
(gst_interpolation_control_source_class_init):
* libs/gst/controller/gstinterpolationcontrolsource.h:
* libs/gst/controller/gstinterpolationcontrolsourceprivate.h:
API: Refactor GstController into the core controller which can take
a GstControlSource for providing actual values for timestamps.
Implement a interpolation control source and use this for backward
compatibility, deprecate a bunch of functions that are now handled
by GstControlSource or GstInterpolationControlSource.
Make it possible to disable the controller completely or only for
specific properties. Fixes #450711.
* docs/libs/gstreamer-libs-docs.sgml:
* docs/libs/gstreamer-libs-sections.txt:
* docs/libs/gstreamer-libs.types:
Add new functions and classes to the docs.
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
* tests/examples/controller/audio-example.c: (main):
Port unit test and example to the new API and add some new
unit tests.
2007-07-06 21:50:02 +00:00
Wim Taymans
4cc7b818fd plugins/elements/gsttee.c: Be a lot smarter when deciding what srcpad to use for proxying the buffer_alloc. Also hand...
Original commit message from CVS:
* plugins/elements/gsttee.c: (gst_tee_base_init),
(gst_tee_request_new_pad), (gst_tee_release_pad),
(gst_tee_find_buffer_alloc), (gst_tee_buffer_alloc),
(gst_tee_do_push), (clear_pads), (gst_tee_handle_buffer),
(gst_tee_chain):
Be a lot smarter when deciding what srcpad to use for proxying
the buffer_alloc. Also handle pad added/removed when doing so.
Fixes #357959.
Keep track of what pads we already pushed on in case we have pads
added/removed while pushing. Fixes #374639
* tests/check/Makefile.am:
* tests/check/elements/tee.c: (handoff), (GST_START_TEST),
(tee_suite):
Added unit test for pad resync.
2007-07-03 16:26:29 +00:00
Jan Schmidt
afebd394fa plugins/elements/gstmultiqueue.*: Take the multiqueue lock when updating the fill level so we don't get confused.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_init),
(gst_single_queue_flush), (apply_segment), (apply_buffer),
(gst_single_queue_push_one), (gst_multi_queue_loop),
(gst_multi_queue_sink_activate_push), (gst_multi_queue_sink_event),
(gst_multi_queue_src_activate_push), (wake_up_next_non_linked),
(compute_high_id), (gst_single_queue_new):
* plugins/elements/gstmultiqueue.h:
Take the multiqueue lock when updating the fill level so we don't get
confused.
After applying a buffer or event on the src pad segment, make sure to
call gst_data_queue_limits_changed() to get the data queue to unblock
and check the filled state again.
Rework the not-linked pad handling so the logic is that not-linked
pads can push as fast as they like, but only so they never get
ahead of any linked pads.
* tests/check/elements/multiqueue.c: (mq_sinkpad_to_srcpad),
(mq_dummypad_getcaps), (mq_dummypad_chain), (mq_dummypad_event),
(run_output_order_test), (GST_START_TEST), (multiqueue_suite):
Add a test to check that not-linked pads always stay behind
linked pads.
2007-06-26 14:45:15 +00:00
Andy Wingo
4e1c9c226a tests/check/pipelines/simple-launch-lines.c
Original commit message from CVS:
2007-06-19  Andy Wingo  <wingo@pobox.com>

* tests/check/pipelines/simple-launch-lines.c
(test_state_change_returns): Enable pull-mode tests now that
basesink has been fixed.

* libs/gst/base/gstbasesink.c (gst_base_sink_needs_preroll):
Changed from gst_base_sink_is_prerolled, reversing the sense of
the return value. Returns FALSE also if the sink is in pull mode,
in which case it needs no preroll.
(gst_base_sink_query, gst_base_sink_change_state): Update for
needs_preroll change.
(gst_base_sink_change_state): Add a case for READY_TO_PAUSED after
chaining up, in which we return SUCCESS directly if we activated
in pull mode instead of ASYNC. Involves countering an async_start
message sent before chaining up; not sure if this is correct, in
an ideal world we only send async-start when activating in push
mode.
2007-06-19 21:58:30 +00:00
Andy Wingo
b0c2d05640 tests/check/pipelines/simple-launch-lines.c
Original commit message from CVS:
2007-06-19  Andy Wingo  <wingo@pobox.com>

* tests/check/pipelines/simple-launch-lines.c
(test_state_change_returns): New test, partially disabled until
basesink is fixed.
2007-06-19 21:28:54 +00:00
Wim Taymans
0b3153873b gst/gstbin.*: Immediatly commit the toplevel bin state when receiving an async-done message. This enables us to avoid...
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_init), (gst_bin_add_func),
(gst_bin_remove_func), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_continue_func),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
* gst/gstbin.h:
Immediatly commit the toplevel bin state when receiving an async-done
message. This enables us to avoid spawning a thread to commit the state
in some common cases and it also avoids some races.
Avoid spawning a state thread when adding/removing async elements to a
toplevel bin. Instead we immediatly update the bin state.
Get rid of iterating all the children when getting the state in the bin
because it is now always up-to-date.
Fix bug where locked elements would always return _SUCCESS even it they
returned NO_PREROLL before being locked.
Fix the order of the state_change, async-start/done messages that was
sometimes incorrect.
Mark the state_dirty field as deprecated, we don't need it anymore as we
are always up-to-date.
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_continue_state):
Small debug inprovements.
Return the previous element state return when nothing is pending instead
of blindly returning SUCCESS.
* tests/check/generic/sinks.c: (GST_START_TEST), (pad_blocked_cb),
(gst_sinks_suite):
Add a whole bunch of new testcases.
2007-06-18 15:12:28 +00:00
Wim Taymans
3d4e515e77 Improve debugging.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_push_event), (gst_pad_send_event):
* libs/gst/base/gstbasesrc.c: (gst_base_src_query_latency),
(gst_base_src_default_query), (gst_base_src_get_range),
(gst_base_src_start):
* tests/check/pipelines/parse-launch.c: (setup_pipeline):
Improve debugging.
2007-06-15 10:43:51 +00:00
Tim-Philipp Müller
9dc9602829 API: add fail_unless_equals_float() and assert_equals_float().
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/check/gstcheck.h:
API: add fail_unless_equals_float() and assert_equals_float().
Add documentation for some of the macros.
* tests/check/libs/controller.c: (GST_START_TEST):
Use newly-added asserts.
2007-06-14 11:56:44 +00:00
Sebastian Dröge
bdcc0329ef libs/gst/controller/: Protect against values larger or smaller than the minimum or maximum allowed value for the prop...
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_new):
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstinterpolation.c:
(gst_controlled_property_find_control_point_node),
(interpolate_none_get), (interpolate_none_get_enum_value_array),
(interpolate_none_get_string_value_array),
(interpolate_trigger_get),
(interpolate_trigger_get_enum_value_array),
(interpolate_trigger_get_string_value_array):
Protect against values larger or smaller than the minimum or maximum
allowed value for the property when using values that can be compared.
Optimize trigger interpolator a bit by taking the last requested value
into account instead of always looping through the complete list.
Fix coding style a bit, everywhere else we use "return foo" instead
of "return (foo)".
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add unit test for the protection against too large or too small
values.
2007-06-09 16:58:30 +00:00
Tim-Philipp Müller
2a3d26e66e Fix multiqueue leaking buffers and events when downstream or the queue are flushing. Make refcounting assumptions exp...
Original commit message from CVS:
* libs/gst/base/gstdataqueue.c:
* libs/gst/base/gstdataqueue.h:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_push_one),
(gst_multi_queue_item_new), (gst_multi_queue_chain),
(gst_multi_queue_sink_event):
* tests/check/elements/multiqueue.c: (multiqueue_suite):
Fix multiqueue leaking buffers and events when downstream or the
queue are flushing. Make refcounting assumptions explicit and
document them (shouldn't break existing code that uses it other than
maybe leak miniobjects, but that already happens anyway). Add unit
test for the most common flushing case. Fixes #423700.
2007-06-06 18:11:10 +00:00
Sebastian Dröge
c478fb4813 libs/gst/controller/: Factor out the 'set' logic into gst_controller_set_unlocked for the gst_controller_set and gst_...
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_set_interpolation_mode),
(gst_controlled_property_prepend_default),
(gst_controlled_property_new), (gst_controller_set_unlocked),
(gst_controller_set), (gst_controller_set_from_list),
(gst_controller_unset), (gst_controller_unset_all):
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstinterpolation.c:
Factor out the 'set' logic into gst_controller_set_unlocked for the
gst_controller_set and gst_controller_set_from_list functions.
To make life of the interpolators easier always add a control point
at timestamp zero with the default value.
In the linear interpolator make things more obvious by better variable
naming (slope).
Implement cubic interpolation mode (by using a natural cubic spline)
and map the quadratic interpolation mode to this too (as quadratic
doesn't make much sense, see discussion on the list).
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add unit test for the cubic interpolation mode and check everywhere
if the interpolation mode could be set as expected.
2007-06-06 14:01:56 +00:00
Tim-Philipp Müller
505f3889ca API: add GstParamSpecFraction, so elements can have fraction properties without lots of painful string parsing (#4446...
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/Makefile.am:
* gst/gst.c:
* gst/gst.h:
* gst/gstparamspecs.c: (_gst_param_fraction_init),
(_gst_param_fraction_set_default), (_gst_param_fraction_validate),
(_gst_param_fraction_values_cmp),
(gst_param_spec_fraction_get_type), (gst_param_spec_fraction):
* gst/gstparamspecs.h:
* gst/gstvalue.c:
* tests/check/Makefile.am:
* tests/check/gst/.cvsignore:
* tests/check/gst/gstparamspecs.c: (gst_dummy_obj_base_init),
(gst_dummy_obj_class_init), (gst_dummy_obj_init),
(gst_dummy_obj_set_property), (gst_dummy_obj_get_property),
(GST_START_TEST), (gst_param_spec_suite):
API: add GstParamSpecFraction, so elements can have fraction
properties without lots of painful string parsing (#444648).
2007-06-06 11:18:12 +00:00
Wim Taymans
74fb9f0fe2 tests/check/gst/gstbin.c: Allow refcount of 3 and 4 because some state thread might still be busy with it.
Original commit message from CVS:
* tests/check/gst/gstbin.c: (GST_START_TEST):
Allow refcount of 3 and 4 because some state thread might still be busy
with it.
2007-05-24 11:50:47 +00:00
Wim Taymans
20c719ae81 tests/check/gst/gstsystemclock.c: Improve test_async_order to also work when both timers are already expired when we ...
Original commit message from CVS:
* tests/check/gst/gstsystemclock.c: (store_callback),
(GST_START_TEST):
Improve test_async_order to also work when both timers are already
expired when we get scheduled to check it.
2007-05-23 13:56:25 +00:00
Tim-Philipp Müller
e4ab657d95 plugins/: Use #ifdef for HAVE_XYZ for consistency.
Original commit message from CVS:
* plugins/elements/gstelements.c:
* plugins/elements/gstfilesink.c: (gst_file_sink_do_seek),
(gst_file_sink_get_current_offset):
* plugins/indexers/gstindexers.c: (plugin_init):
Use #ifdef for HAVE_XYZ for consistency.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/filesink.c: (setup_filesink),
(cleanup_filesink), (GST_START_TEST), (filesink_suite):
Add some unit tests for filesink.
2007-05-22 11:55:33 +00:00
Sebastian Dröge
51424c0da5 libs/gst/controller/gstcontroller.*: Clarify the docs of gst_controller_get_value_array(): The array where the values...
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controller_get_value_array):
* libs/gst/controller/gstcontroller.h:
Clarify the docs of gst_controller_get_value_array(): The array where
the values should be written to must be allocated as there seems to be
no way to get the size of a random GType. This doesn't change any
behaviour. Also fix some typos all over the place and remove an unused,
commented function that is not necessary as g_object_set() could be
used instead.
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add unit test for gst_controller_get_value_array().
2007-05-21 21:34:49 +00:00
Jan Schmidt
8482f46afe tests/check/gst/gstbuffer.c: Disable part of the gst_buffer_try_new_and_alloc test, because it can happily succeed on...
Original commit message from CVS:
* tests/check/gst/gstbuffer.c: (GST_START_TEST):
Disable part of the gst_buffer_try_new_and_alloc test, because
it can happily succeed on 64-bit systems where there's more address
space available.
2007-05-21 14:50:51 +00:00
Sebastian Dröge
375534ed10 tests/check/gst/gstpad.c: Add unit test for the improved caps checking from bug #421543.
Original commit message from CVS:
* tests/check/gst/gstpad.c: (GST_START_TEST), (gst_pad_suite):
Add unit test for the improved caps checking from bug #421543.
2007-05-21 12:05:56 +00:00
Sebastian Dröge
b92d7dc076 libs/gst/controller/: Add a new private GstControlPoint struct which "inherits" from
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* libs/gst/controller/gstcontroller.c: (gst_control_point_compare),
(gst_control_point_find), (gst_controlled_property_new),
(gst_control_point_free), (gst_controlled_property_free),
(gst_controller_set), (gst_controller_set_from_list),
(gst_controller_unset), (gst_controller_unset_all),
(gst_controller_sync_values):
* libs/gst/controller/gstcontroller.h:
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstinterpolation.c:
(gst_controlled_property_find_control_point_node),
(interpolate_none_get), (interpolate_trigger_get):
Add a new private GstControlPoint struct which "inherits" from
GstTimedValue to allow different interpolators to store internal
values next to each control point. From the outside everything is
still a GstControlPoint so we don't loose binary compatibility.
Also fixup all the GValue handling to not leak GValues or list nodes.
* tests/check/libs/controller.c: (GST_START_TEST):
Free the list nodes and GValues in the controller_misc test.
2007-05-17 17:05:36 +00:00
Wim Taymans
b50ecf0661 plugins/elements/gstqueue.*: Refactor an cleanup queue a bit.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_init),
(gst_queue_finalize), (update_time_level), (apply_segment),
(apply_buffer), (gst_queue_locked_flush),
(gst_queue_locked_enqueue), (gst_queue_locked_dequeue),
(gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_push_one), (gst_queue_loop):
* plugins/elements/gstqueue.h:
Refactor an cleanup queue a bit.
Do better time level calculations that also work when the srcpad is not
yet running.
Remove some unneeded debug lines.
* tests/check/elements/queue.c: (GST_START_TEST), (queue_suite):
Added testcase for time level measurement.
Try to make some stuff more racefree.
2007-05-12 15:35:40 +00:00
Tim-Philipp Müller
7f1acfb0c8 gst/gsturi.c: Don't leak plugin feature.
Original commit message from CVS:
* gst/gsturi.c: (gst_element_make_from_uri):
Don't leak plugin feature.
* tests/check/Makefile.am:
* tests/check/gst/.cvsignore:
* tests/check/gst/gsturi.c: (GST_START_TEST), (gst_uri_suite):
Add brain-dead unit test.
2007-05-11 14:46:10 +00:00
Peter Kjellerstedt
f38b77d70b gst/: Maintain API and ABI when --disable-parse is used. Now that we have an appropriate error code, we can just retu...
Original commit message from CVS:
Based on patch by: Peter Kjellerstedt  <pkj at axis com>
* gst/Makefile.am:
* gst/gstparse.c: (gst_parse_launchv), (gst_parse_launch):
* gst/gstparse.h:
* gst/gstutils.c: (gst_parse_bin_from_description):
* gst/gstutils.h:
Maintain API and ABI when --disable-parse is used. Now that
we have an appropriate error code, we can just return NULL and the
appropriate error when gst_parse_launch() is used despite it having
been disabled (#342564).
* tests/check/Makefile.am:
* tests/check/pipelines/.cvsignore:
* tests/check/pipelines/parse-disabled.c:
Make sure these functions exist and return NULL plus a GError when
--disable-parse is used.
2007-05-09 16:32:07 +00:00
Tim-Philipp Müller
42651f72ff libs/gst/controller/: Don't crash if someone tries to set an interpolation mode that is invalid or that isn't support...
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_set_interpolation_mode):
* libs/gst/controller/gstinterpolation.c:
Don't crash if someone tries to set an interpolation mode that
is invalid or that isn't supported yet. Fixes #422295.
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add a test case for the above.
2007-05-04 12:37:01 +00:00
Tim-Philipp Müller
2c5a8cdb31 API: add gst_buffer_try_new_and_alloc() plus unit test (#431940).
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstbuffer.c: (gst_buffer_try_new_and_alloc):
* gst/gstbuffer.h:
* tests/check/gst/gstbuffer.c: (GST_START_TEST),
(gst_buffer_suite):
API: add gst_buffer_try_new_and_alloc() plus unit test (#431940).
2007-04-26 10:00:49 +00:00
Jan Schmidt
b9b5877a51 gst/gstelement.c: Don't output the same debug statement twice.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_get_state_func):
Don't output the same debug statement twice.
* libs/gst/base/gstadapter.c: (gst_adapter_try_to_merge_up),
(gst_adapter_peek), (gst_adapter_take_buffer):
Optimise the case where we have buffers at the head of the queue that
can be joined quickly (because they're contiguous sub-buffers) by
merging them together rather than copying data out into new memory.
* gst/parse/grammar.y:
* tests/check/pipelines/parse-launch.c:
Fix a leak in an error path for parse_launch, and add a check
for it to the testsuite.
2007-04-13 11:53:00 +00:00
Wim Taymans
12c9334667 libs/gst/base/gstbasesink.c: Fix leak caused when refusing newsegment after EOS.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event):
Fix leak caused when refusing newsegment after EOS.
* plugins/elements/gstfakesink.c: (gst_fake_sink_class_init),
(gst_fake_sink_init), (gst_fake_sink_set_property),
(gst_fake_sink_get_property), (gst_fake_sink_preroll),
(gst_fake_sink_render), (gst_fake_sink_change_state):
* plugins/elements/gstfakesink.h:
Add num-buffers property to make the element generate EOS after a
configurable amount of buffers.
API: fakesink::num-buffers property.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Fix GstBus leak in test.
Test for fakesink num-buffers.
2007-04-05 11:16:09 +00:00
Wim Taymans
cc82861367 libs/gst/base/gstbasesink.c: Don't accept anything after an EOS, return UNEXPECTED instead.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event),
(gst_base_sink_change_state):
Don't accept anything after an EOS, return UNEXPECTED instead.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Unit test for new EOS behaviour.
2007-04-05 10:10:08 +00:00
Tim-Philipp Müller
df244cef04 plugins/elements/gstmultiqueue.c: Don't leak GCond.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_free):
Don't leak GCond.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/multiqueue.c: (setup_multiqueue),
(GST_START_TEST), (multiqueue_suite):
Add some dead simple unit tests for the 'multiqueue' element
(some bits don't work yet and are disabled for now).
2007-03-28 18:38:11 +00:00
Wim Taymans
79e426d5f9 tests/check/gst/gstsystemclock.c: Unref some more to make valgrind happy.
Original commit message from CVS:
* tests/check/gst/gstsystemclock.c: (GST_START_TEST),
(mixed_thread), (mixed_async_cb), (gst_systemclock_suite):
Unref some more to make valgrind happy.
2007-03-22 12:31:54 +00:00
Wim Taymans
94054fc1b7 gst/gstsystemclock.c: Fix anoying regression that survived a few releases. When adding an async entry while blocking ...
Original commit message from CVS:
* gst/gstsystemclock.c: (gst_system_clock_id_wait_jitter_unlocked),
(gst_system_clock_id_wait_jitter),
(gst_system_clock_id_wait_async), (gst_system_clock_id_unschedule):
Fix anoying regression that survived a few releases. When adding an
async entry while blocking on a sync entry, the sync entry will unblock
but still be busy, so it should continue to wait instead of returning
_BUSY to the app.
Add some comments here and there.
* tests/check/gst/gstsystemclock.c: (mixed_thread),
(mixed_async_cb), (GST_START_TEST), (gst_systemclock_suite):
Add testcase for this.
2007-03-22 11:58:08 +00:00
Wim Taymans
d14c4c4a67 docs/gst/gstreamer-sections.txt: Add new element field and method.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add new element field and method.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_change_state_func),
(gst_bin_continue_func), (bin_bus_handler),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
Make async state changes a bit smarter by using new ASYNC_START and
ASYNC_DONE messages. This reduces the number of times we run the state
recalculation thread.
Don't change state of element with a pending ASYNC_START message.
Deprecate STATE_DIRTY messages.
* gst/gstelement.c: (gst_element_init), (gst_element_send_event),
(gst_element_get_state_func), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_set_state_func),
(gst_element_change_state):
* gst/gstelement.h:
Keep the state that was last set by the app in a new element field.
Don't allow state changes when handling an element event.
Post ASYNC_START and ASYNC_DONE messages.
Change lost_state so that we go to PAUSED and wait for the parent to set
us to PLAYING again (so latency calculation can be performed)
Export gst_element_change_state() method so that subclasses can use it.
API: gst_element_change_state()
API: GST_STATE_TARGET
* gst/gstpipeline.c: (gst_pipeline_class_init),
(reset_stream_time), (gst_pipeline_change_state),
(gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time):
Using the new ASYNC_START message we can reset the base_time when
needed. This can then be used to implement base_time redistribution in
flushing seeks so that we can remove the explicit seek handling.
Perform latency query and configuration when going to PLAYING.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query), (gst_base_sink_change_state):
Post new ASYNC_START/ASYNC_DONE messages.
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix test because the bin will not set the async element to PLAYING right
away.
* tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST):
Make the message check a little stronger.
Handle ASYNC messages.
* tests/check/pipelines/cleanup.c: (GST_START_TEST):
* tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST):
Expect ASYNC_DONE messages.
2007-03-19 10:47:56 +00:00
Wim Taymans
b864edefbd libs/gst/base/gstbasesink.c: Improve latency query code.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_query_latency),
(gst_base_sink_queue_object_unlocked), (gst_base_sink_send_event),
(gst_base_sink_change_state):
Improve latency query code.
Don't leak latency events.
* tests/check/gst/gstbin.c: (GST_START_TEST):
Improve debugging.
2007-02-28 16:46:07 +00:00
Thomas Vander Stichele
7d42056b8e plug test leak
Original commit message from CVS:
plug test leak
2007-02-28 12:57:42 +00:00
Thomas Vander Stichele
85c1dc5c9d actually use the env var for tests
Original commit message from CVS:
actually use the env var for tests
2007-02-28 12:43:57 +00:00
Thomas Vander Stichele
155fa0066d tests/check/generic/states.c: Copy the current generic/states example from -base and adapt so we can use the exact sa...
Original commit message from CVS:
* tests/check/generic/states.c: (GST_START_TEST), (states_suite):
Copy the current generic/states example from -base and adapt so
we can use the exact same code everywhere.
Check a STATES_IGNORE_ELEMENTS env var which can be used
to ignore certain element factories for this test, which is
what is being done in -base
* tests/check/Makefile.am:
Mention this environment variable.
2007-02-28 12:40:45 +00:00
Wim Taymans
7553c996a4 API: gst_bus_timed_pop()
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstbus.c: (gst_bus_init), (gst_bus_dispose), (gst_bus_post),
(gst_bus_timed_pop), (gst_bus_pop):
* gst/gstbus.h:
API: gst_bus_timed_pop()
Implement gst_bus_timed_pop() to do a blocking timed wait for a
message to arrive on the bus.
* tests/check/gst/gstbus.c: (GST_START_TEST), (pop_thread),
(gst_bus_suite):
Two unit tests for new _timed_pop() function.
2007-02-27 17:22:07 +00:00
Wim Taymans
6f24e3101e tests/check/gst/gstevent.c: Improve debugging.
Original commit message from CVS:
* tests/check/gst/gstevent.c: (event_probe), (test_event),
(GST_START_TEST):
Improve debugging.
2007-02-15 08:40:38 +00:00
Wim Taymans
e683477828 tests/check/gst/gstsegment.c: Fix check
Original commit message from CVS:
* tests/check/gst/gstsegment.c: (GST_START_TEST):
Fix check
2007-02-13 15:51:00 +00:00
Wim Taymans
a25cedb415 docs/design/draft-latency.txt: Small update.
Original commit message from CVS:
* docs/design/draft-latency.txt:
Small update.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_get_latency), (gst_base_sink_query_latency),
(gst_base_sink_wait_clock), (gst_base_sink_send_qos),
(gst_base_sink_perform_qos), (gst_base_sink_queue_object_unlocked),
(gst_base_sink_chain_unlocked), (gst_base_sink_send_event),
(gst_base_sink_get_position), (gst_base_sink_query),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
API: gst_base_sink_query_latency() to let subclasses query the upstream
latency.
API: gst_base_sink_get_latency() to let subclasses query the configured
latency in the sink.
Implement query and set latency.
Update some docs.
As spotted by Will Newton <will dot newton at gmail dot com>: Make sure we
don't continue preroll when we are flushing. Fixes #405284.
* tests/check/pipelines/stress.c: (change_state_timeout),
(quit_timeout), (GST_START_TEST), (stress_suite):
Test for #405284.
2007-02-12 11:32:22 +00:00
Andy Wingo
d87ccbe0f4 tests/check/pipelines/simple-launch-lines.c
Original commit message from CVS:
2007-02-09  Andy Wingo  <wingo@pobox.com>

* tests/check/pipelines/simple-launch-lines.c
(simple_launch_lines_suite, test_tee): Disable tee test until I
have time to fix it :-(
2007-02-09 15:25:45 +00:00
Andy Wingo
96d9b88bbc tests/check/: Add ABI checks for PPC32.
Original commit message from CVS:
2007-02-09  Andy Wingo  <wingo@pobox.com>

* tests/check/Makefile.am (noinst_HEADERS):
* tests/check/libs/libsabi.c:
* tests/check/libs/struct_ppc32.h: Add ABI checks for PPC32.
* tests/check/gst/gstabi.c:
* tests/check/gst/struct_ppc32.h: Add ABI checks for PPC32.
2007-02-09 13:59:32 +00:00
Andy Wingo
1a95191ff5 tests/check/pipelines/simple-launch-lines.c (test_tee): Add tests for push and pull tee behavior.
Original commit message from CVS:
2007-02-09  Andy Wingo  <wingo@pobox.com>

* tests/check/pipelines/simple-launch-lines.c (test_tee): Add
tests for push and pull tee behavior.

* plugins/elements/gsttee.h:
* plugins/elements/gsttee.c: Describe has-sink-loop better, and
mark as deprecated as well as unimplemented. It was a crack idea.
Add support for tee operating in pull mode, off by default.
2007-02-09 13:45:27 +00:00
Sebastian Dröge
e8f48c03f4 tests/check/elements/filesrc.c: Add unit test for the GstURIHandler interface in filesrc. This also tests the newly a...
Original commit message from CVS:
* tests/check/elements/filesrc.c: (GST_START_TEST),
(filesrc_suite):
Add unit test for the GstURIHandler interface in filesrc. This also
tests the newly added file://localhost/foo/bar support.
2007-02-05 08:15:26 +00:00
Tim-Philipp Müller
7cd0c45ee0 tests/check/: Add ABI structs for HPPA (see #393796).
Original commit message from CVS:
* tests/check/gst/gstabi.c:
* tests/check/gst/struct_hppa.h:
* tests/check/libs/libsabi.c:
* tests/check/libs/struct_hppa.h:
Add ABI structs for HPPA (see #393796).
2007-01-17 12:31:01 +00:00
Stefan Kost
5826d1676c tests/check/gst/gsttask.c: Fix header comment.
Original commit message from CVS:
* tests/check/gst/gsttask.c:
Fix header comment.
2007-01-15 14:51:09 +00:00
Tim-Philipp Müller
52a29f5bb4 tests/check/: Add minimal unit test for beforementioned GstTagSetter bug.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/gst/.cvsignore:
* tests/check/gst/gsttagsetter.c: (gst_dummy_enc_add_interfaces),
(gst_dummy_enc_base_init), (gst_dummy_enc_class_init),
(gst_dummy_enc_init), (tag_list_foreach), (tag_setter_list_length),
(GST_START_TEST), (gst_tag_setter_suite):
Add minimal unit test for beforementioned GstTagSetter bug.
2007-01-12 10:53:54 +00:00
Tim-Philipp Müller
4a911a8100 tests/check/gst/gstpad.c: Fix 'make check' too.
Original commit message from CVS:
* tests/check/gst/gstpad.c: (test_get_allowed_caps):
Fix 'make check' too.
2007-01-11 10:48:59 +00:00
Tim-Philipp Müller
2b63322224 tests/check/.cvsignore: Ignore test-registry.xml as well.
Original commit message from CVS:
* tests/check/.cvsignore:
Ignore test-registry.xml as well.
2007-01-09 14:38:11 +00:00
Tim-Philipp Müller
702fbf77e9 API: add gst_update_registry() (#391296).
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gst.c: (load_plugin_func), (scan_and_update_registry),
(init_post), (gst_deinit), (gst_update_registry):
* gst/gst.h:
API: add gst_update_registry() (#391296).
* tests/check/Makefile.am:
* tests/check/gst/gstregistry.c:
* tests/check/gst/.cvsignore:
Simple unit test for the above.
2007-01-08 20:30:12 +00:00
Tim-Philipp Müller
2991d5cd33 gst/gstregistry.c: Plugin extension on HP-UX is .sl, add that to the list of approved plugin extensions (see #393796).
Original commit message from CVS:
* gst/gstregistry.c: (gst_registry_scan_path_level):
Plugin extension on HP-UX is .sl, add that to the list of approved
plugin extensions (see #393796).
* tests/check/gst/gstpad.c: (GST_START_TEST):
ulong => gulong. Fixes compilation with HP-UX compiler.
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Fix compilation if valgrind headers are not available.
2007-01-08 16:23:03 +00:00
Stefan Kost
fcd5faf825 tests/check/Makefile.am: disable test again, as there seem to be still race problems
Original commit message from CVS:
* tests/check/Makefile.am:
disable test again, as there seem to be still race problems
2007-01-04 13:54:25 +00:00
Stefan Kost
6fe3fda99e tests/check/: enable queue test again, add tests for the leaky behaviour
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/queue.c: (queue_overrun), (queue_underrun),
(GST_START_TEST), (queue_suite):
enable queue test again, add tests for the leaky behaviour
2007-01-04 13:37:08 +00:00
Stefan Kost
8bfabdfe1c tests/check/: sync .cvsignome and CLEANFILES
Original commit message from CVS:
* tests/check/.cvsignore:
* tests/check/Makefile.am:
sync .cvsignome and CLEANFILES
2006-12-21 15:54:06 +00:00
Stefan Kost
24d07724be tests/check/Makefile.am: fix distcheck
Original commit message from CVS:
* tests/check/Makefile.am:
fix distcheck
2006-12-21 15:32:00 +00:00
Stefan Kost
261abbb01e docs/design/part-states.txt: two tiny additional comments
Original commit message from CVS:
* docs/design/part-states.txt:
two tiny additional comments
* gst/gststructure.c:
doc fixing
* tests/check/Makefile.am:
* tests/check/elements/queue.c: (queue_overrun), (queue_underrun),
(GST_START_TEST):
disable test for now, unless it gets fixed
2006-12-21 15:00:08 +00:00
Stefan Kost
a378db54fb tests/check/elements/queue.c: fix race in underrun test
Original commit message from CVS:
* tests/check/elements/queue.c: (queue_overrun), (queue_underrun),
(GST_START_TEST):
fix race in underrun test
2006-12-21 14:24:54 +00:00
Stefan Kost
63873698c3 tests/check/elements/.cvsignore: ignore more
Original commit message from CVS:
* tests/check/elements/.cvsignore:
ignore more
* tests/check/elements/queue.c: (queue_overrun), (queue_underrun),
(GST_START_TEST):
try to narrow test failure
2006-12-21 09:58:25 +00:00
Stefan Kost
c9fbb589a0 libs/gst/check/gstcheck.c: do not automatically (de)activate pads
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_setup_src_pad),
(gst_check_teardown_src_pad), (gst_check_setup_sink_pad),
(gst_check_teardown_sink_pad):
do not automatically (de)activate pads
* tests/check/Makefile.am:
* tests/check/elements/queue.c: (queue_overrun), (queue_underrun),
(setup_queue), (cleanup_queue), (GST_START_TEST), (queue_suite):
add new, yet simple tests for queue
* tests/check/elements/fakesrc.c: (cleanup_fakesrc):
* tests/check/elements/fdsrc.c: (cleanup_fdsrc):
* tests/check/elements/filesrc.c: (cleanup_filesrc),
(GST_START_TEST):
* tests/check/elements/identity.c: (cleanup_identity):
consistent pad (de)activation
2006-12-21 08:12:28 +00:00
Edward Hervey
f65a1d384e gst/gstsegment.c: Fine tune the cases where the segment start/stop values are really updated.
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_seek):
Fine tune the cases where the segment start/stop values are really
updated.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
Add tests for the return values of gst_segment_set_seek().
2006-12-19 12:38:00 +00:00
Jan Schmidt
5a79cb9ede tests/check/gst/gstbin.c: It is acceptable to have a refcount of 2 or 3 at this point in the test, because the pipeli...
Original commit message from CVS:
* tests/check/gst/gstbin.c: (GST_START_TEST):
It is acceptable to have a refcount of 2 or 3 at this point in the
test, because the pipeline might be just posting its state_change
message. The next line then waits for that message to appear using
bus_poll, so that should be fine too.
2006-12-09 20:23:10 +00:00
René Stadler
a258e87342 gst/gstclock.c: Make period ids add the interval to the origial requested time instead of the possibly updated time w...
Original commit message from CVS:
Patch by: René Stadler <mail at renestadler dot de>
* gst/gstclock.c: (gst_clock_id_wait):
Make period ids add the interval to the origial requested time instead
of the possibly updated time which can be wrong when there are multiple
waiters for the same id. Fixes #382592.
* gst/gstsystemclock.c: (gst_system_clock_async_thread),
(gst_system_clock_id_wait_jitter_unlocked),
(gst_system_clock_id_wait_jitter):
Fix restart in the async notify thread when an async entry is added to
the front of the list. Fixes #381492.
* tests/check/gst/gstsystemclock.c: (store_callback),
(notify_callback), (GST_START_TEST), (gst_systemclock_suite):
Added test for multiple async waits.
Added test for async wait order.
2006-12-07 10:51:36 +00:00
Wim Taymans
f830f6f4ac gst/gstsegment.c: Fix boundary checking in to_running_time() and to_stream_time().
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_seek),
(gst_segment_set_newsegment_full), (gst_segment_to_stream_time),
(gst_segment_to_running_time):
Fix boundary checking in to_running_time() and to_stream_time().
Fixes #377183.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
stream and running time can now be calculated for the complete
clipped segment.
2006-11-20 10:27:49 +00:00
Jan Schmidt
6f363cd89b Do some optimisation work in GstAdapter to avoid copies in more cases.
Original commit message from CVS:
* Makefile.am:
* configure.ac:
* libs/gst/base/gstadapter.c: (gst_adapter_clear),
(gst_adapter_push), (gst_adapter_peek_into), (gst_adapter_peek),
(gst_adapter_flush), (gst_adapter_take), (gst_adapter_take_buffer):
* libs/gst/base/gstadapter.h:
* tests/check/libs/adapter.c: (create_and_fill_adapter),
(GST_START_TEST), (gst_adapter_suite):
* tests/examples/Makefile.am:
Do some optimisation work in GstAdapter to avoid copies in more cases.
It could still do slightly better by merging buffers when
gst_buffer_is_span_fast is true, but is already faster.
Also, avoid traversing a single-linked list to append each incoming
buffer inside the adapter.
Add simple test app that times the adapter behaviour in different
situations, and extend the unit test to check that bytes enter and
exit the adapter in their original order.
2006-11-09 14:37:38 +00:00
Stefan Kost
234221776e tests/check/gst/gsttag.c: relicence (okay with author=company)
Original commit message from CVS:
* tests/check/gst/gsttag.c:
relicence (okay with author=company)
2006-11-06 15:22:40 +00:00
Tim-Philipp Müller
c7fc3dc0e8 gst/gststructure.c: If someone tries to set a non-UTF8 string field on a structure, don't just print a warning, but a...
Original commit message from CVS:
* gst/gststructure.c: (gst_structure_id_set_value):
If someone tries to set a non-UTF8 string field on a structure,
don't just print a warning, but also ignore the request and do
not change/add that field to the structure.
* tests/check/gst/gsttag.c: (GST_START_TEST), (gst_tag_suite):
Test for the above.
2006-10-26 08:49:52 +00:00
Tim-Philipp Müller
db8e173590 libs/gst/controller/gstcontroller.c: Fix refcounting here too, just like we did for _new_valist() a few days ago (#35...
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c: (gst_controller_new_list):
Fix refcounting here too, just like we did for _new_valist() a few
days ago (#357180) (thanks to René Stadler). Also remove all those
'Since: 0.9' from the gtk-doc blobs.
* tests/check/libs/controller.c: (controller_refcount_new_list),
(gst_controller_suite):
Unit test for the above.
2006-10-11 09:13:26 +00:00
Wim Taymans
0a53651b1f gst/gstevent.c: Rename some more @cur to @start to fix docs.
Original commit message from CVS:
* gst/gstevent.c: (gst_event_new_seek), (gst_event_parse_seek):
Rename some more @cur to @start to fix docs.
* gst/gstsegment.c: (gst_segment_set_seek):
Fix typo.
time and start must always stay in sync as defined in design doc.
* gst/gsttaglist.c: (gst_tag_list_is_empty):
Rename param to fix docs.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
Check that start and time are in sync.
* tests/check/pipelines/parse-launch.c:
(gst_parse_test_element_change_state):
Activate pad before adding to the element.
2006-10-09 17:15:39 +00:00
Wim Taymans
89814eed61 docs/design/part-qos.txt: Fix typo.
Original commit message from CVS:
* docs/design/part-qos.txt:
Fix typo.
* gst/gstevent.c:
* gst/gstevent.h:
Update seek event docs regarding negative rates.
Rename @cur to @start.
* gst/gstsegment.c: (gst_segment_set_seek):
* gst/gstsegment.h:
Update set_seek docs regarding negative rates.
Correctly update last_stop to @stop when dealing with negative
rates.
Rename @cur to @start.
* tests/check/gst/gstpad.c: (GST_START_TEST):
Activate pads before trying to use them.
* tests/check/gst/gstsegment.c: (GST_START_TEST),
(gst_segment_suite):
Add simple check for segments and negative rates.
2006-10-09 16:33:29 +00:00
Tim-Philipp Müller
3a8fdc1d39 API: add gst_tag_list_is_empty() (#360467).
Original commit message from CVS:
* gst/gsttaglist.c: (gst_tag_list_is_empty):
* gst/gsttaglist.h:
* docs/gst/gstreamer-sections.txt:
API: add gst_tag_list_is_empty() (#360467).
* tests/check/gst/gsttag.c: (GST_START_TEST):
And a test case.
2006-10-09 11:20:44 +00:00
Tim-Philipp Müller
35ae6c7472 gst/gsttaglist.*: Minor fixes to GST_IS_TAG_LIST and gst_is_tag_list().
Original commit message from CVS:
* gst/gsttaglist.c: (gst_is_tag_list):
* gst/gsttaglist.h:
Minor fixes to GST_IS_TAG_LIST and gst_is_tag_list().
* tests/check/gst/gsttag.c: (GST_START_TEST), (gst_tag_suite):
Small test for the above.
2006-10-07 18:41:19 +00:00
Wim Taymans
15b2ccbcc9 tests/check/gst/gstghostpad.c: Fix leak in check.
Original commit message from CVS:
* tests/check/gst/gstghostpad.c: (GST_START_TEST),
(gst_ghost_pad_suite):
Fix leak in check.
2006-10-02 16:46:16 +00:00
Alessandro Decina
86a6abe32d gst/gstevent.c: Fix gst_mini_object_make_writable() and gst_event_copy() for events with event structures by setting ...
Original commit message from CVS:
Patch by: Alessandro Decina  <alessandro at nnva org>
* gst/gstevent.c: (_gst_event_copy):
Fix gst_mini_object_make_writable() and gst_event_copy() for events
with event structures by setting the parent refcount address of the
copied structure to the address of the refcount member of the newly
copied event rather than the address of the refcount member of the
original event. Fixes #358737.
* tests/check/gst/gstevent.c: (GST_START_TEST):
Unit test for the above.
2006-10-02 08:37:24 +00:00
Tim-Philipp Müller
c67ec73df6 tests/check/libs/controller.c: Add test for the previous fix; add some more tests for correct refcounting behaviour; ...
Original commit message from CVS:
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add test for the previous fix; add some more tests
for correct refcounting behaviour; fix a few leaks
in test cases; call gst_controller_init() at start
of all tests.
2006-09-29 12:31:18 +00:00
Jan Schmidt
d1effe5859 gst/: Re-commit the registry changes, along with an extra fix:
Original commit message from CVS:
* gst/gst.c: (init_pre), (scan_and_update_registry),
(ensure_current_registry_nonforking),
(ensure_current_registry_forking), (ensure_current_registry),
(init_post), (gst_debug_help), (gst_deinit):
* gst/gst_private.h:
* gst/gstregistry.c: (gst_registry_finalize),
(gst_registry_remove_features_for_plugin_unlocked),
(gst_registry_remove_plugin), (gst_registry_scan_path_level),
(gst_registry_scan_path),
(_priv_gst_registry_remove_cache_plugins),
(_priv_gst_registry_cleanup):
* gst/gstregistry.h:
Re-commit the registry changes, along with an extra fix:
When a cached plugin is encountered at a different file path,
update the stored path in the registry cache so that the parent
process knows where it actually is now when it re-reads the registry
cache. Fixes the thing that broke distcheck with the previous commit.
* tests/check/Makefile.am:
Clean up files named 'core' too when running make clean.
* tests/examples/manual/Makefile.am:
Set up a registry path for running these tests, and clean it properly
for distcheck.
2006-09-28 14:00:43 +00:00
Tim-Philipp Müller
b74d2e83a6 tests/check/gst/gstcaps.c: Add some tests for gst_caps_intersect().
Original commit message from CVS:
* tests/check/gst/gstcaps.c: (GST_START_TEST), (gst_caps_suite):
Add some tests for gst_caps_intersect().
* tools/gst-launch.c: (event_loop):
Print all buffering percentages we get, even the 100% one.
2006-09-27 09:23:18 +00:00
Tim-Philipp Müller
f3c07d5d20 gst/gstformat.c: Fix locking order (must take lock before using n_values).
Original commit message from CVS:
* gst/gstformat.c: (gst_format_register):
Fix locking order (must take lock before using n_values).
* gst/gstvalue.c: (gst_value_serialize_enum),
(gst_value_deserialize_enum_iter_cmp),
(gst_value_deserialize_enum):
Fix serialisation/deserialisation of custom registered GstFormats.
* tests/check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
Unit test for custom format serialisation/deserialisation.
2006-09-17 19:26:16 +00:00
Wim Taymans
bb634398b7 gst/: Small cleanups in docs and code.
Original commit message from CVS:
* gst/gstobject.c: (gst_object_set_parent):
* gst/gstpipeline.c: (do_pipeline_seek):
Small cleanups in docs and code.
* gst/gstsegment.c: (gst_segment_clip):
* tests/check/gst/gstsegment.c: (GST_START_TEST):
if stop == start and start is in the segment, no clipping should be
done. Also add a test for this.
2006-09-15 08:43:44 +00:00
Wim Taymans
47e5ba2f15 docs/design/part-gstghostpad.txt: Update ascii art in documentation.
Original commit message from CVS:
* docs/design/part-gstghostpad.txt:
Update ascii art in documentation.
* gst/gstghostpad.c: (gst_proxy_pad_do_internal_link),
(gst_proxy_pad_set_target_unlocked), (gst_proxy_pad_init),
(gst_ghost_pad_parent_set), (gst_ghost_pad_parent_unset),
(gst_ghost_pad_internal_do_activate_push),
(gst_ghost_pad_internal_do_activate_pull),
(gst_ghost_pad_do_activate_push), (gst_ghost_pad_do_activate_pull),
(gst_ghost_pad_do_link), (gst_ghost_pad_do_unlink),
(gst_ghost_pad_dispose), (gst_ghost_pad_new_full),
(gst_ghost_pad_set_target):
Small cleanups and leak fixes.
Remove some checks now that the internal pad is never NULL.
Fix the case where linking pads without a target would create nasty
criticals. Fixes #341029.
Don't assign a GstPadLinkReturn to a gboolean and mess up the return
value of _set_target().
* tests/check/gst/gstghostpad.c: (GST_START_TEST),
(gst_ghost_pad_suite):
Some more tests for creating and linking untargeted ghostpads.
2006-08-31 15:19:44 +00:00
Edward Hervey
ce6e126d47 Refactored *_new() functions.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstghostpad.c: (gst_proxy_pad_do_getcaps),
(gst_proxy_pad_do_setcaps), (gst_proxy_pad_set_target_unlocked),
(gst_proxy_pad_dispose), (gst_ghost_pad_new_full),
(gst_ghost_pad_new_no_target), (gst_ghost_pad_new),
(gst_ghost_pad_new_from_template),
(gst_ghost_pad_new_no_target_from_template):
* gst/gstghostpad.h:
Refactored *_new() functions.
Templates are now used as a g_object_new() parameter.
Use template in _do_getcaps() if we don't have a target.
Small documentation cleanups.
Added two new constructors:
gst_ghost_pad_new_from_template()
gst_ghost_pad_new_no_target_from_template()
* tests/check/gst/gstghostpad.c: (GST_START_TEST),
(gst_ghost_pad_suite):
Added tests for new ghostpad instanciation functions.
API additions: gst_ghost_pad_new_from_template,
gst_ghost_pad_new_no_target_from_template
2006-08-31 10:59:11 +00:00
Tim-Philipp Müller
ab00f16f12 gst/gstxml.c: Improve and detypofy docs.
Original commit message from CVS:
* gst/gstxml.c:
Improve and detypofy docs.
* tests/check/Makefile.am:
* tests/check/gst/.cvsignore:
* tests/check/gst/gstxml.c: (GST_START_TEST), (gst_xml_suite):
Add a basic test suite for GstXML.
2006-08-29 10:49:03 +00:00
Wim Taymans
a0dbcd9ee4 gst/gstcaps.*: Fix docs and indentation again.
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_merge_structure):
* gst/gstcaps.h:
Fix docs and indentation again.
* tests/check/gst/gstquery.c: (GST_START_TEST):
Fix leak in tests and add some more tests.
2006-08-28 16:39:20 +00:00
Torsten Schoenfeld
481238cfce Initialize variables when creating a new segment query.
Original commit message from CVS:
Patch by: Torsten Schoenfeld <kaffeetisch at gmx dot de>
* gst/gstquery.c: (gst_query_new_segment):
* tests/check/gst/gstquery.c: (GST_START_TEST):
Initialize variables when creating a new segment query.
Fixes #353121.
2006-08-28 08:44:29 +00:00
Torsten Schoenfeld
7fc02489e3 Check for NULL before _reffing the bus. Fixes #353122.
Original commit message from CVS:
Patch by: Torsten Schoenfeld <kaffeetisch at gmx dot de>
* gst/gstelement.c: (gst_element_get_bus):
* tests/check/gst/gstelement.c: (GST_START_TEST):
Check for NULL before _reffing the bus. Fixes #353122.
2006-08-28 08:35:31 +00:00
Tim-Philipp Müller
e8578fd5cf tests/check/gst/gstcaps.c: Don't leak caps in unit test; add a few more simple checks.
Original commit message from CVS:
* tests/check/gst/gstcaps.c: (GST_START_TEST):
Don't leak caps in unit test; add a few more simple
checks.
2006-08-24 12:30:04 +00:00
Stefan Kost
fc8d184bba implement caps merging (fixes #352580)
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstcaps.c: (gst_caps_structure_is_subset_field),
(gst_caps_structure_is_subset), (gst_caps_merge),
(gst_caps_merge_structure):
* gst/gstcaps.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps):
* tests/check/gst/gstcaps.c: (GST_START_TEST), (gst_caps_suite):
implement caps merging (fixes #352580)
2006-08-24 10:40:31 +00:00
Wim Taymans
87a78cc03d gst/gstbuffer.c: Copy duration/offset_end/caps when creating a subbuffer of the complete parent.
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_make_metadata_writable),
(gst_buffer_create_sub):
Copy duration/offset_end/caps when creating a subbuffer of the
complete parent.
Make the subbuffer read-only when we make the metadata writable for
now. Fixes #351768.
* tests/check/gst/gstbuffer.c: (GST_START_TEST):
Added check for metadata copy when creating subbuffers.
2006-08-21 09:30:04 +00:00
Edward Hervey
b19d19a8b6 tests/check/gst/gstinfo.c: Disable test that require gstdebug if it wasn't built in core.
Original commit message from CVS:
* tests/check/gst/gstinfo.c: (gst_info_suite):
Disable test that require gstdebug if it wasn't built in core.
2006-08-18 13:41:02 +00:00
Tim-Philipp Müller
a8714f5195 gst/gstutils.c: Fix memleak (#351502).
Original commit message from CVS:
* gst/gstutils.c: (gst_util_set_value_from_string):
Fix memleak (#351502).
* tests/check/gst/gstutils.c: (GST_START_TEST), (gst_utils_suite):
Add unit test for most of gst_util_set_value_from_string()
(not that one would want to encourage use of this function).
2006-08-15 18:45:39 +00:00