Refusing an incoming segment in < GST_MATROSKA_READ_STATE_DATA should only be
done if the incoming segment is not in GST_FORMAT_TIME.
In GST_FORMAT_TIME, we are just storing the values and returning, so we can
invert the order of the checks.
Fixes proper segment propagation in matroska/webm DASH use-cases
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3914>
... otherwise streams with constant size samples defined with a single
`sample_size` for all samples in the `stsz` box fall in the category
`chunks_are_samples` in `qtdemux_stbl_init`, overriding the actual
sample count.
`FOURCC_soun` would set this automatically for `compression_id == 0xfffe`,
however `compression_id` is read from the Audio Sample Entry box at an offset
marked as "pre-defined" in some version of the spec and set to 0 both by
GStreamer and FFmpeg for opus streams.
Considering the stream `sampled` flag is set explicitely by other fourcc
variants, doing so for opus seems consistent.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4903>
The "Encapsulation of Opus in ISO Base Media File Format" [1] specifications,
§ 4.3.2 Opus Specific Box, indicates that data must be stored as big-endian.
In `build_opus_extension`, `gst_byte_writer_put*_le ()` variants were used,
causing audio streams conversion to Opus in mp4 to offset samples due to the
PreSkip field incorrect value (29ms early in our test cases).
[1] https://opus-codec.org/docs/opus_in_isobmff.html#4.3.2
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4875>
When doing a segment seek, the base offset in the new segment
would be increased by segment.position which is basically the
timestamp of the last packet. This does not include the duration
of the last packet though, so might be slightly shorter than the
actual duration of the clip or the requested segment.
Increase the base offset by the segment duration instead when
accumulating segments, which is more correct as it doesn't cut
off the last frame and makes the effective loop segment duration
consistent with the actual duration returned from a duration
query.
In case a segment stop was specified it's also possible that
some data was sent beyond the stop that's necessary for decoding
so the base offset increment should be based on that then and
not on the timestamp of the last buffer pushed out.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4604>
The muxer used a fixed value of 2 channels because the TR 102 366 spec
says they're to be ignored. However, the demuxer still trusted them,
resulting in bad caps.
Make the muxer fill in the correct channel count anyway (FFmpeg already
does) and make the demuxer ignore the value.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4739>
Allow a project to use gstreamer-full as a static library
and link to create a binary without dependencies.
Introduce the option 'gst-full-target-type' to
select the build type, dynamic(default) or static.
In gstreamer-full/static build configuration gstreamer (gst.c)
needs the symbol gst_init_static_plugins which is defined
in gstreamer-full.
All the tests and examples are linking with gstreamer but the
symbol gst_init_static_plugins is only defined in the gstreamer-full
library. gstreamer-full can not be built first as it needs to know what plugins
will be built.
One option would be to build all the examples and tests after
gstreamer-full as the tools.
Disable tools build in subprojects too as it will be built at the end of
build process.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4128>
Since c0bf793c05 ("flvmux: Set PTS based on
running time") the timestamp of the output buffer is already in running
time. So using that for 'srcpad->segment.position' does not work correctly
because gst_aggregator_simple_get_next_time() will convert it again with
gst_segment_to_running_time().
This means that the timestamp returned by
gst_aggregator_simple_get_next_time() may be incorrect. For example, if
flvmux is added to a already runinng pipeline then the timestamp is too
small and gst_aggregator_wait_and_check() returns immediately. As a result,
buffers may be muxed in the wrong order.
To fix this, use the PTS of the incoming buffer instead of the outgoing
buffer. Also add the duration as get_next_time() is supposed to return the
timestamp of the next buffer, not the current one.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4701>
The index is already incremented by 3 every iteration so multiplying it
by 3 additionally on each array access is doing it twice and does not
work.
This caused invalid files to be created if there's more than one CEA608
triplet in a buffer, and out of bounds memory reads.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4634>
Make splitmuxsrc deal better with stream reordering by
making the largest observed PTS contiguous in the
next fragment. Previously, it selected DTS, but then
aligned that with the segment start of the next fragment,
which holds PTS values - leading to glitches in
streams that don't have PTS = DTS at the start.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4637>
It could indeed be used uninitialized, but only if one of the
g_return_val_if_fail() caused an early return.
../subprojects/gst-plugins-good/gst/rtpmanager/rtpjitterbuffer.c: In function ‘rtp_jitter_buffer_append_query’:
../subprojects/gst-plugins-good/gst/rtpmanager/rtpjitterbuffer.c🔢10: warning: ‘head’ may be used uninitialized
[-Wmaybe-uninitialized]
1234 | return head;
| ^~~~
../subprojects/gst-plugins-good/gst/rtpmanager/rtpjitterbuffer.c:1232:12: note: ‘head’ was declared here
1232 | gboolean head;
| ^~~~
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4616>
This is a fix for a data race leading to:
> GLib-CRITICAL: g_hash_table_foreach:
> assertion 'version == hash_table->version' failed
Identified sequence:
* `rtp_session_on_timeout` acquires the lock on `session` and proceeds with its
processing.
* `rtp_session_process_rtcp` is called (debug log : received RTCP packet) and
attempts to acquire the lock on `session`, which is still held by
`rtp_session_on_timeout`.
* as part of an hash table iterator, `rtp_session_on_timeout` transitively
invokes `source_caps` which releases the lock on `session` so as to call
`session->callbacks.caps`.
* Since `rtp_session_process_rtcp` was waiting for the lock to be released, it
succeeds in acquiring it and proceeds with `rtp_session_process_rr` which
transitively calls `g_hash_table_insert` via `add_source`.
* After `source_caps` re-acquires the lock and gives the control flow back to
`rtp_session_on_timeout`, the hash table iterator is changed, resulting in the
assertion failure.
This commits copies `sess->ssrcs[sess->mask_idx]` and iterates on the copy so
the iterator is not affected by a concurrent change due to the lock being
released in the `source_caps` callback.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4555>
Since c2f890ab, element properties are gathered from the parse-launch
line and passed at object construction.
This caused the following issue to happen in videoflip:
* videoflip installed a CONSTRUCT property named method, now deprecated
* videoflip now also overrides that property with a video-direction
property
GObject construction causes method to be set first at construct time,
with the user-provided value, then video-direction with the default
value.
The user-provided value was thus overridden, causing a regression.
Fix by not installing the properties as CONSTRUCT, and explicitly
implementing constructed() instead in order to ensure that we do still
call gst_video_flip_set_method() at least once during construction.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2529
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4536>
Atomically set and get the picture_id. This changeset only atomically gets
the picture-id when such property is queried on the element, on every other
place where it is accessed internally it is accessed directly.
This is because there is no MT scenario where we would be modifying this value
and reading it internally in parallel.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4530>
In recent versions of Chrome (M106) a change on their jitter buffer means that
they are very susceptible to PictureID discontinuities.
Then avoid at all cost resetting the PictureID. Moreover, according to
the RFCs for VP8 and VP9 payloads; the PictureID can start off at any
random value. So there is no logical problem of incrementing it here
rather than resetting it, as long as it is a different PictureID.
WebRTC's recent corruption issue:
https://bugs.chromium.org/p/webrtc/issues/detail?id=15101
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4530>
If we don't do that, clients can rely on this signal to see the final pad
topology but it won't be the real one as some of them will disappear after
emitting that signal. This can happen after injecting a different init segment.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4535>
While testing the [implementation for insertable streams] in `webrtcsink` &
`webrtcsrc`, I encountered critical warnings, which turned out to result from
two race conditions in `rtpsession`. Both race conditions produce:
> GLib-CRITICAL: g_hash_table_foreach:
> assertion 'version == hash_table->version' failed
This commit fixes one of the race conditions observed.
In its simplest form, the test consists in 2 pipelines and a Signalling server:
* pipelines_sink: audiotestsrc ! webrtcsink
* pipelines_src: webrtcsrc ! appsrc
1. Set `pipelines_sink` to `Playing`.
2. The Signalling server delivers the `producer_id`.
3. Initialize `pipelines_src` to establish a session with `producer_id`.
4. Set `pipelines_src` to `Playing`.
5. Wait for a buffer to be received by the `appsrc`.
6. Set `pipelines_src` to `Null`.
7. Set `pipelines_sink` to `Null`.
The race condition happens in the following sequence:
* `webrtcsink` runs a task to periodically retrieve statistics from `webrtcbin`.
This transitively ends up executing `rtp_session_create_stats`.
* `pipelines_sink` is set to `Null`.
* In `Paused` to `Ready`, `gst_rtp_session_change_state()` calls
`rtp_session_reset()`.
* The assertion failure occurs when `rtp_session_reset` is called while
`rtp_session_create_stats` is executing.
This is because `rtp_session_create_stats` acquires the lock on `session` prior
to calling `g_hash_table_foreach`, but `rtp_session_reset` doesn't acquire the
lock before calling `g_hash_table_remove_all`.
Acquiring the lock in `rtp_session_reset` fixes the issue.
[implementing insertable streams support]: https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/merge_requests/1176
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4528>
This reverts commit f29c19be58. If this is
called for the reference context then we would run into an infinite
loop, which is not really better than an assertion.
By fixing up DTS to never be ahead of the PTS in the previous commit
this situation should be impossible to hit now.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4498>
Fix the following use:
- upstream sends a video with a rotation tag, say 90°
- upstream switches to another video without rotation
- the second video was still rotated by videoflip
Fix this by resetting the orientation when receiving STREAM_START.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4377>
The previous code would only check if two packets in a row were duplicates. If
not (i.e. a packet is a duplicate of a packet received slightly before) the code
would generate completely bogus FCI because it assumes there were no duplicates
present in the array.
In order to be efficient, just store all received packets and remove the
duplicates just before the FCI is generated once the array of observations have
been sorted by seqnum.
Fixes TWCC usage with moderate to high packet duplication.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4328>
With GST_SEEK_FLAG_SNAP_AFTER present, the previous version would
adjust seek time based on the keyframe farthest away from desired_time.
This was incorrect, because we always want the *earliest* suitable keyframe
to seek to, not the last one.
With this fix, in case of the SNAP_AFTER, we now look for the closest keyframe
that can be found after desired_time. Behaviour for SNAP_BEFORE should remain
unchanged.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4183>
The flowcombiner and active_streams shouldn't be cleared in the
mse-bytestream variant, only in the mss-fragmented one. Otherwise the
soft reset leaves qtdemux in a state where it still believes that it has
streams, but they've been cleared. In that case, a null pointer
dereference happens and the app crashes.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4199>
The abort() method of SourceBuffer in Media Source Extensions is
expected to flush the demuxer and discard the current fragment,
if any. The configuration of tracks, if any, should be preserved.
qtdemux has different behavior for flush events depending on the
context.
This patch activates the intended behaviour only for streams of the
VARIANT_MSE_BYTESTREAM type, conformant to the ISO BMFF Bytestream
specification[1]. This flush behaviour is the same as the one
already in use for adaptivedemux sources.
[1] https://www.w3.org/TR/mse-byte-stream-format-isobmff/https://bugzilla.gnome.org/show_bug.cgi?id=795424
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4101>
This patch prevents a possible race condition from taking place between the EOS event handling and rtcp send
function/thread.
The condition starts by getting the GST_EVENT_EOS event on the send_rtp_sink pad, which causes two core things
to happen -- the event gets pushed down to the send_rtp_src pad and all sessions get marked "bye" prior to
completion of the event handler. In another thread the rtp_session_on_timeout function gets called after an
expiration of gst_clock_id_wait in the rtcp_thread function. This results in a call to the
ess->callbacks.send_rtcp(), which is configured as a function pointer to gst_rtp_session_send_rtcp via the
RTPSessionCallbacks structure passed to rtp_session_set_callbacks in the gst_rtp_session_init function.
In the race condition, the call to gst_rtp_session_send_rtcp can have the all_sources_bye boolean set to true
while GST_PAD_IS_EOS(rtpsession->send_rtp_sink) evaluates to false. This is the result of gst_rtp_session_send_rtcp
running before the send_rtp_sink's GST_EVENT_EOS handler completes. The exact point at which this condition occurs
is if there's a context switch to the rtcp_thread right after the call to rtp_session_mark_all_bye in the
GET_EVENT_EOS handler, but before the handler returns.
Normally, this would not be an issue because the rtcp_thread continues to run and indirectly call
gst_rtp_session_send_rtcp. However, the call to rtp_source_reset sets the sent_bye boolean to false, which ends up
causing rtp_session_are_all_sources_bye to return false. This gets passed to gst_rtp_session_send_rtcp and the EOS
event never gets sent.
The race condition results in the EOS event never getting passed to the rtcp_src pad, which prevents the bin and
pipeline from ever completing with EOS.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3798>
A data offset with an offset smaller than the moof length is wrong
in smooth streaming streams.
The samples will not be located and eventually playback will
error out. So compensate assuming data is in mdat following moof.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3840>
The av1C box is optional so dropping parsing does not break anything
fundamentally, and there seems to be no historical record how version 0
even looks like while the comments and the parsing disagreed with each
other.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3882>
When using qtdemux in a pipeline that should only work as a pure demuxer (not
for actual playback), qtdemux shouldn't emit new GstSegments to correct
the start time (jump to the future) to ensure that the user experiences no
playback delay. By doing so, it's generating the wrong segments when an append
of data from the past happens. When that happens, downstream elements such as
parsers (eg: aacparse) may clip those buffers laying before the GstSegment and
create problems on the GStreamer client app (eg: WebKit).
Getting buffers clipped out because of the wrong GstSegments started becoming
a problen when this commit was introduced:
ab6e49e9cc audioparsers: add back segment clipping to parsers that have lost it
This clipping makes test DASH shaka 35 from MVT tests[1] to fail in
WebKitGTK/WPE (at least) and can potentially cause a number of other problems
in the WebKit Media Source Extensions (MSE) code.
Note that this new behaviour of not emitting new GstSegments only makes sense
when qtdemux is being used as a pure demuxer and not as part of a regular
pipeline. This is why the variant field has been added. When equal to
VARIANT_MSE_BYTESTREAM, it will make qtdemux behave differently in push mode,
taking decisions that meet the expectations for an MSE-like processing mode.
This kind of tweaks have been done in the past for MSS streams, for instance.
That code has been refactored to use VARIANT_MSS_FRAGMENTED now, instead of
its own dedicated boolean flag.
Co-authored by: Alicia Boya García <ntrrgc@gmail.com>
...who suggested to use "variant: mse-bytestream" in the caps to identify that
mode, as proposed in her unmerged patch:
https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/issues/467
[1] https://github.com/rdkcentral/mvt
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3867>
All the RTP src pads were sharing the same stream-id while each actually
carry a different stream.
This was causing problem for example when funneling the streams together
and then trying to split them using 'streamiddemux'.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3855>
In theory, `dispose()` functions should be idempotent and should be
prepared not to crash or cause a double-free if an unref done from
inside caused a recursive call to `dispose()` of the same object.
https://developer.gnome.org/gobject/stable/howto-gobject-destruction.html
This patch modifies the `dispose()` method to honor these constraints.
Since the double `dispose()` call won't actually occur in qtdemux (there
is no cycle detection mechanism that could invoke it to work that way),
this is more of a code cleanup than a user-facing problem fix.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3822>
Deserialize socket control messages as GstSocketTimestampMessage only
if (level, type) is (SOL_SOCKET, SCM_TIMESTAMPNS).
Without this patch, messages with types SCM_RIGHTS or SCM_CREDENTIALS
could be deserialized as GstSocketTimestampMessage instead of
GUnixFDMessage or GUnixCredentialsMessage from gio.
Fixes#1736
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3777>
AVC-Intra is a range of H.264-compliant intra-only codecs from
Panasonic. The codes and descriptions have been taken from VLC.
The (encumbered) sample I have here produces byte-stream H.264,
including SPS and PPS and no `avcC` box.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3739>
This is recommended by various specifications for such framerates, while
for integer framerates we continue using centiframes to allow for some
more accuracy.
Using N means that no rounding error accumulates, eventually leading to
outputting a packet with a different duration.
Some tools such as MediaInfo determine that a stream is variable
framerate if any packet has a different duration than the others, and
there is no reason I can see for not using the full 4 bytes of
resolution that the mp4 timescale offers.
Example problematic pipeline:
```
videotestsrc num-buffers=5001 ! video/x-raw,framerate=60000/1001,width=320,height=240 ! \
videoconvert ! x264enc bitrate=80000 speed-preset=1 tune=zerolatency ! h264parse ! \
video/x-h264,profile=high-10 ! mp4mux ! filesink location="result2.mp4"
```
This results in a media file that MediaInfo detects as variable
framerate because the 5000th packet has duration 99 instead of 100.
With this patch, the timescale is 60000 and all packets have duration
1001.
Related issue for context: https://bugzilla.gnome.org/show_bug.cgi?id=769041
Co-authored-by: Sebastian Dröge <sebastian@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3049>
This reverts the decision from
https://bugzilla.gnome.org/show_bug.cgi?id=754230
where it was decided that we rather play safe and only use the `tfdt` if
it is "significantly different" to the sum of sample durations.
As the specification says
If the time expressed in the track fragment decode time (‘tfdt’) box
exceeds the sum of the durations of the samples in the preceding
movie and movie fragments, then the duration of the last sample
preceding this track fragment is extended such that the sum now
equals the time given in this box.
we have to use the `tfdt` in general to allow for it to signal gaps in
the stream.
A muxer producing fragments might not yet know the full duration of the
last sample of a previous fragment if the next fragment starts with a
gap, and knowing the actual start of the next fragment would potentially
require to violate latency requirements.
Additionally, the existence of `tfdt` allows to avoid accumulating
rounding errors from summing up the durations.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3586>
If we keep the old events they can be end up being passed to the app, that could
discard the protection information because it has been seen before.
Drive by improvement: use g_queue_clear_full instead of foreach+clear for
protection events.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3547>
Currently in rtp_session_send_rtp(), the existing ntp-64 RTP header
extension timestamp is updated with the actual NTP time before sending
the packet. However, there are some circumstances where we would like
to preserve the original timestamp obtained from reference timestamp
buffer metadata.
This commit provides the ability to configure whether or not to update
the ntp-64 header extension timestamp with the actual NTP time via the
update-ntp64-header-ext boolean property. The property is also exposed
via rtpbin. Default property value of TRUE will preserve existing
behavior (update ntp-64 header ext with actual NTP time).
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1580
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3451>
Previously we tried to route an incoming RTCP FB FIR to the correct ssrc
using the "media source" component of the RTCP FB message. However,
according to RFC5104 (section 4.3.1.2) the "media source" SHALL be set
to 0. Instead the ssrc(s) in use are propagated via the FCI data. Now
a specific GstForceKeyUnit event is sent for every ssrc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3292>
RTP source statistics are tracked for local senders by
treating them as a receiver of their own outbound packets.
Accordingly, track the highest packet seqnum so that the
packets-lost calculation generates a sensible number instead
of always reporting -$number_of_packets_sent
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3454>
When getting a "404 Not Found" response from the DESCRIBE request, the
source produced a "No supported authentication protocol was found" error
instead of passing on the 404, which was confusing.
Only produce this error message when we're handling a response of "401
Unauthorized" without a compatible WWW-Authenticate header.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3414>
The only case where we definitely need to write a new trun is when the
data_offset value does not match the end of the list of entries.
Needing multiple trun atoms is required when interleaving multiple
streams together.
All other cases can be covered by adding more entries to the existing
trun atom.
Fixes playback of fragemented mp4 in ffplay and chrome.
Using e.g. mp4mux fragment-duration=1000 fragment-mode=dash-or-mss
and
mp4mux fragment-duration=1000 fragment-mode=first-moov-then-finalise
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3426>
In order to figure out if the "raw" audio contained within the wav
container is actually DTS, wavparse calls the typefinder helper
except that means it runs all typefinders.
Since it only cares about checking for DTS, we should only run the
audio/x-dts typefinder (if present). Commit 858e516 did not really
fix things.
Use the new type helper with the caps to fix this.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3417>
Set udpsrc seqnums on all events sent to the udpsrc's, and before
forwarding events out of rtspsrc set the latest seek seqnum on them if
any.
Also produce a consistent seqnum in rtspsrc from the very beginning.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3409>
This is small regression from commit f7abd81a.
When calling `gst_element_query()` no pad is associated with that query, but the
current code always forwards the query to the associated pad, which is NULL in
previous case. This patch checks for the pad before forwarding the query.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3404>
In a few cases throughout qtdemux, the results of QT_UINT32 were being
stored in a signed integer, which could cause subtle bugs in the case of
an integer overflow, even allowing the the result to equal a negative
number!
This patch prevents this by simply storing the results of this function
call properly in an unsigned integer type. Additionally, we fix up the
length checking with stsd parsing to prevent cases of child atoms
exceeding their parent atom sizes.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3344>
In order to figure out if the "raw" audio contained within the wav
container is actually DTS, right now we call the typefinder helper
which runs all typefinders.
Speed up this type finding process by specifying the extension.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3294>
We've seen occasional crashes in the `wavparse` module associated with
referencing a buffer in `gst_wavparse_chain` that's already been freed. The
reference is stolen when the buffer is transferred to the adapter with
`gst_adapter_push` and, IIUC, assuming the source doesn't hold a reference to
the buffer, the buffer could be freed during interaction with the adapter in
`gst_wavparse_stream_headers`.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3179>
in certain ways.
In the case that a test is provided for, the size of the `fmt ` chunk is
changed from 16 bytes to 18 bytes (bytes 17 - 20 below):
```
$ hexdump -C corruptheadertestsrc.wav
00000000 52 49 46 46 e4 fd 00 00 57 41 56 45 66 6d 74 20 |RIFF....WAVEfmt |
00000010 12 00 00 00 01 00 01 00 80 3e 00 00 00 7d 00 00 |.........>...}..|
00000020 02 00 10 00 64 61 74 61 |....data|
00000028
```
(Note that the original file is much larger. This was the smallest sub-file
I could find that would generate the crash.)
Note that, while the same issue doesn't cause a crash in pull mode, there's a
different issue in that the file is processed successfully as if it was a .wav
file with zero samples.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3173>
This is a regression that was introduced in
cca2f555d1 (yes, 9 years ago).
The only place where a demuxer streaming thread should be stopped is when the
sinkpad is deactivated from pull mode (i.e. PAUSED->READY).
Attempting to stop the task in this function would cause this to happen when a
FLUSH_STOP or STREAM_START event is received... which can cause deadlocks.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3109>
If the SETUP request returns an IPv6 server address in the Transport
field, we would generate an incorrect URI, and multiudpsink would fail
to initialize:
```
rtspsrc gstrtspsrc.c:9780:dump_key_value:<source> key: 'Transport', value: 'RTP/AVP;unicast;source=fe80::dc27:25ff:fe5e:bd13:8080;client_port=62696-62697;server_port=4000-4001'
...
rtspsrc gstrtspsrc.c:4595:gst_rtspsrc_stream_configure_udp_sinks:<source> configure RTP UDP sink for fe80::dc27:25ff:fe5e:bd13:8080:4000
...
multiudpsink gstmultiudpsink.c:1229:gst_multiudpsink_configure_client:<udpsink0> error: Invalid address family (got 23)
```
We can't look at stream->is_ipv6 because we can't rely on the server
returning the right value there. In the issue reported about this,
server reported itself as `KuP RTSP Server/0.1`, and the SDP was:
```
c=IN IP4
m=video 54608 RTP/AVP 96
a=rtpmap:96 H264/90000
```
So we need to parse the string value and figure out the family
ourselves.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1058
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1819>
Timers for RTX packets are dealt with later in update_rtx_timers(), and
timers for non-RTX packets would potentially also be unscheduled a
second time from there so avoid that.
Also don't shadow the timer variable from the outer scope but instead
make use of it directly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2973>
When stopping the element, make sure the pad task
is stopped before destroying the part readers.
Closes a race where the pad task might access
a freed pointer.
Also add a guard against this sort of thing
by holding a ref to the reader in the pad loop.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2901>
That is, get rid of unnecessary and wrong special-casing.
This could always use gst_rtsp_url_get_request_uri_with_control() but as
we only have the control base URI as string it is easier to just call
gst_uri_join_strings().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2868>
Otherwise we won't send the protection packets for the last few
packets when a stream ends.
Also send EOS on the FEC src row pad immediately, and on the FEC src
column pad after draining is complete. This makes it so that the FEC
src pads on rtpbin behave the same way as the RTCP src pads on rtpbin
when EOS is received on the send_rtp_sink pad.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2863>
With the 2.72 release, glib-networking developers have decided that
TLS certificate validation cannot be implemented correctly by them, so
they've deprecated it.
In a nutshell: a cert can have several validation errors, but there
are no guarantees that the TLS backend will return all those errors,
and things are made even more complicated by the fact that the list of
errors might refer to certs that are added for backwards-compat and
won't actually be used by the TLS library.
Our best option is to ignore the deprecation and pass the warning onto
users so they can make an appropriate security decision regarding
this.
We can't deprecate the tls-validation-flags property because it is
very useful when connecting to RTSP cameras that will never get
updates to fix certificate errors.
Relevant upstream merge requests / issues:
https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2214https://gitlab.gnome.org/GNOME/glib-networking/-/issues/179https://gitlab.gnome.org/GNOME/glib-networking/-/merge_requests/193
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2494>
The caps negotiation should respect the selected method to the test pipeline below works properly.
gst-launch-1.0 videotestsrc ! video/x-raw,width=320,height=600 ! videoflip method=clockwise ! video/x-raw,width=600,height=320 ! fakesink
Signed-off-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2803>
Various variables were of smaller types than needed and there were no
checks for any overflows when doing additions on the sizes. This is all
checked now.
In addition the size of the decompressed data is limited to 200MB now as
any larger sizes are likely pathological and we can avoid out of memory
situations in many cases like this.
Also fix a bug where the available output size on the next iteration in
the zlib decompression code was provided too large and could
potentially lead to out of bound writes.
Thanks to Adam Doupe for analyzing and reporting the issue.
CVE: tbd
https://gstreamer.freedesktop.org/security/sa-2022-0003.html
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1225
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2610>
Various variables were of smaller types than needed and there were no
checks for any overflows when doing additions on the sizes. This is all
checked now.
In addition the size of the decompressed data is limited to 120MB now as
any larger sizes are likely pathological and we can avoid out of memory
situations in many cases like this.
Also fix a bug where the available output size on the next iteration in
the zlib/bz2 decompression code was provided too large and could
potentially lead to out of bound writes.
Thanks to Adam Doupe for analyzing and reporting the issue.
CVE: CVE-2022-1922, CVE-2022-1923, CVE-2022-1924, CVE-2022-1925
https://gstreamer.freedesktop.org/security/sa-2022-0002.html
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1225
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2610>
If our downstream caps didn't intersect, we attempted to convert between
raw and ADTS stream formats, if possible. If the caps still did not
intersect, we then used the modified `src_caps` but left the
`output_header_type` unmodified.
This caused a mismatch between caps and actual stream format.
Avoid this by first copying the `src_caps` to `convcaps` for the
additional intersection tests, replacing `src_caps` if we succeed.
While we're here, clean up the code a bit and remove the `codec_data`
field from outgoing ADTS caps.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2550>
https://bugzilla.gnome.org/show_bug.cgi?id=741398 changed
rtpptdemux in 2014 to not post a GST_ELEMENT_ERROR on the
bus when dropping an invalid (non-RTP) packet, but still
returned GST_FLOW_ERROR upstream - so the pipeline still
stops, but now without a useful bus error.
Return GST_FLOW_OK instead, so the pipeline keeps
running. Some old telephony equipment can send invalid
packets before the real RTP traffic starts.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2520>
When processing the first event after probing the
file and being activated, requeue sticky events
as there's no requirement that demuxers send tag
and other events again after a seek - that's
why they're sticky.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2432>
- Consistently unref the chained buffer at the end of the chain
function, if we're not handing it off to `gst_pad_push`. This avoids a
few buffer leaks in the error paths in `_chain` and `_push_history`.
- When mapping the video frame fails, return a flow error instead of
crashing.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2428>
If we just break the loop, we might run into the `gop != NULL` assert
that follows it. Rather, exit immediately with flushing flow.
Also use this flushing mechanism when we release a pad. This avoids
having an extra flag.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1030>
The timestamp in the tfdt refers to the first trun box and if there are
multiple trun boxes then the distance between the first timestamps will
grow.
At some point this distance reaches a threshold and triggers the
resetting of the first sample's timestamp of this trun box to be reset
to the tfdt.
This threshold is implemented for files where there is a jump in the
timeline between fragments and where this can be detected via a jump
between the end timestamp of the previous fragment and the tfdt of the
next. This behaviour is preserved.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2409>
mp4mux can't negotiate caps with upstream/downstream and always outputs
specific caps based on the input streams. This will always happen before
it produces the first buffers.
By having the default aggregator negotiation enabled the same caps
would be pushed twice in the beginning, and again every time a
reconfigure event is received.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2372>
flvmux can't negotiate caps with upstream/downstream and always outputs
specific caps based on the input streams. This will always happen before
it produces the first buffers.
By having the default aggregator negotiation enabled the same caps
would be pushed twice in the beginning, and again every time a
reconfigure event is received.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2372>
Mixing C loops with switch statements is a bad idea as break has a
different meaning in both. Breaking inside the switch statements wrongly
caused further loop iterations.
Instead use goto to get out of the loop and continue to do another loop
iteration, and never ever use break except for the end of a case.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2336>
In push mode (streaming), if the received chunk buffer size from _chain is bigger
than output buffer size, the flags of the divided-buffers are propagated to the
DISCONT flag from first received chunk buffer. This unexpected buffers contained DISCONT
flags are abnormally transformed when changing the sampling rate by audioresample element.
So unset unnecessary DISCONT flag before pad_push().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2305>
Previously, we only added it when actually performing synchronization
based on the NTP time.
The information can be useful downstream in other situations too, and
we can compute a NTP time as soon as we get a sender report with the
relevant information.
Co-authored-by: Mathieu Duponchelle <mathieu@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2252>
When the sink is configured to create sockets with an explicit bind
address, then the created socket gets set to the udp_socket field
irregardless of whether the bind address indicated that the socket
family should be IPv4 or IPv6. When binding to an IPv6 address, this
results in the following error:
gstmultiudpsink.c:1285:gst_multiudpsink_configure_client:<rtcpsink>
error: Invalid address family (got 10)
This patch adds a check of the address family being bound to and sets
the created socket to used_socket or used_socket_v6, accordingly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1551>
The RTCP SR packet might be without SDES in case of a reduced-size RTCP
packet. For syncing purposes the CNAME is needed but it might be known
already from an earlier RTCP packet or out of band, via the SDP for
example.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
GLib guarantees libintl is always present, using proxy-libintl as
last resort. There is no need to mock gettex API any more.
This fix static build on Windows because G_INTL_STATIC_COMPILATION must
be defined before including libintl.h, and glib does it for us as part
as including glib.h.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>
They are part of gst_dep already and we have to make sure to always have
gst_dep. The order in dependencies matters, because it is also the order
in which Meson will set -I args. We want gstreamer's config.h to take
precedence over glib's private config.h when it's a subproject.
While at it, remove useless fallback args for gmodule/gio dependencies,
only gstreamer core needs it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2031>
