Identity was ignoring seek and flush events even when using
a single segment. In the end it means that we couldn't compute
buffers running-time and stream time after seeks.
This commits adds support for flushing seeks only as I have no idea
what to do for non flushing ones.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/450>
In reverse playback, buffers are played back from buffer.stop
(buffer.pts + buffer.duration) to buffer.pts running times which
mean that we need to use the buffer end running time as a buffer
timestsamp, not the buffer pts when using a single segment in reverse
playback.
This is now being tested in
`validate.test.identity.reverse_single_segment`
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/450>
downloadbuffer source pad pushes the first buffer before pushing
Stream Start and Segment event, when working in Push mode.
Fix:Pushing Stream Start and Segment after coming out of
wait for data, and before pushing the buffer to next element.
Fixes#534
The returned "stats" structure contains, for now, one array called
"queues" with one GstStructure per internal queue, containing said
queue's current level of bytes, buffers, and time.
It is not explicitly specified anywhere in the docs that 0% buffering is
at low-watermark and 100% buffering is at high-watermark. It was
specified only in the sources.
current_buf_mem_idx stands for the index of memory of the corresponding
buffer which is scheduled to be written in the next iteration.
If all memory objects were scheduled to be written in the current
iteration, reset the index to zero so that starting from the first
memory object of the next buffer.
Previously the default and full modes were the same. Now the default
mode is like before: it accumulates all buffers in a buffer list until
the threshold is reached and then writes them all out, potentially in
multiple writes.
The new full mode works by always copying memory to a single memory area
and writing everything out with a single write once the threshold is
reached.
If buffer lists with too many buffers would be written before, a stack
overflow would happen because of memory linear with the number of
GstMemory would be allocated on the stack. This could happen for example
when filesink is configured with a very big buffer size.
Instead now move the buffer and buffer list writing into the helper
functions and at most write IOV_MAX memories at once. Anything bigger
than that wouldn't be passed to writev() anyway and written differently
in the previous code, so this also potentially speeds up writing for
these cases.
For example the following pipeline would crash with a stackoverflow:
gst-launch-1.0 audiotestsrc ! filesink buffer-size=1073741824 location=/dev/null
The clocksync element is a generic element that can be
placed in a pipeline to synchronise passing buffers to the
clock at that point. This is similar to 'identity sync=true',
but because it isn't GstBaseTransform-based, it can process
GstBufferLists without breaking them into separate GstBuffers
According to [1] EINTR is a possible errno for fsync() and it happens in
reality on linux (video writing via splitmuxsink with robust muxing enabled
on a cifs mounted network share), so handle it as all other EINTR
(do/while(errno == EINTR)).
Fixes:
GError.message: Error while writing to file "vidoe_001.mp4". GError.domain: 2372 GError.code: 10 from: FileSink debug: gstfilesink.c(849): gst_file_sink_render (): /GstPipeline:Pipeline/GstSplitMuxSink:SplitMuxSink/GstBin:QueueBin/GstFileSink:FileSink: Interrupted system call
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
`g_object_notify()` actually takes a global lock to look up the
`GParamSpec` that corresponds to the given property name. It's not a
huge performance hit, but it's easily avoidable by using the
`_by_pspec()` variant.
This reverts a96002bb28, which is not
necessary anymore. If we release the pad after removing it then none of
the deactivation code will actually be called because the pad has no
parent anymore, and we require a parent on the pad for deactivation to
happen.
This can then, among other things, cause a streaming thread to be still
stuck in a pad probe because the pad was never flushed, and waiting
there forever because now the pad will actually never be flushed anymore.
If a pad is currently being released we don't want to forward the
FLUSHING flow return but instead consider it as NOT_LINKED. FLUSHING
would also cause upstream to be FLUSHING.
This part was missed in a3c4a3201a and
resulted in a different (and wrong) workaround in
a96002bb28.
Otherwise we're not guaranteed to read the very latest value that
another thread might've written in there when the pad was released, and
could instead work with an old value.
By passing NULL to `g_signal_new` instead of a marshaller, GLib will
actually internally optimize the signal (if the marshaller is available
in GLib itself) by also setting the valist marshaller. This makes the
signal emission a bit more performant than the regular marshalling,
which still needs to box into `GValue` and call libffi in case of a
generic marshaller.
Note that for custom marshallers, one would use
`g_signal_set_va_marshaller()` with the valist marshaller instead.
In gst_download_buffer_wait_for_data(), when a seek is made with
perform_seek_to_offset() the `qlock` is released temporarily. Therefore,
the flushing condition can be set during this period and should be
checked.
This was not being checked before, causing occasional deadlocks when
GST_DOWNLOAD_BUFFER_WAIT_ADD_CHECK() was called.
GST_DOWNLOAD_BUFFER_WAIT_ADD_CHECK() assumes that the caller has already
checked that we're not flushing before, since this is done when
acquiring the lock; so if we release it temporarily somewhere, we need
to check for flush again.
Without that check, the function would keep waiting for the condition
variable to be notified before checking for flushing condition again,
and that may very well never happen. This was reproduced when during pad
deactivation when running WebKit in gdb.
sync=TRUE implementation changes the latency query of a non-live
upstream into live, though it wrongly set the upstream max latency to 0.
As non-live sources won't loose data if we wait longer, this should have
been reported as have no max latency limite (-1).
In the hotdoc inspector for example, pads are instantiated with
g_object_new, other code paths to get/set properties already make
that check.
And update doc cache
There was a race where we could still get the pad event function
called when its private member were already unset, leading to
a segfault in the event handler:
```
0 gst_multi_queue_src_event (pad=<optimized out>, parent=<optimized out>, event=0x7f3ff0007600) at ../subprojects/gstreamer/plugins/elements/gstmultiqueue.c:2534
2534 ret = gst_pad_push_event (sq->sinkpad, event);
[Current thread is 1 (Thread 0x7f406c0258c0 (LWP 21925))]
(gdb) bt
0 0x00007f4062ec1399 in gst_multi_queue_src_event (pad=<optimized out>, parent=<optimized out>, event=0x7f3ff0007600 [GstEvent]) at ../subprojects/gstreamer/plugins/elements/gstmultiqueue.c:2534
1 0x00007f406b40f46d in gst_validate_pad_monitor_src_event_check (handler=0x7f4062ec1360 <gst_multi_queue_src_event>, event=0x7f3ff0007600 [GstEvent], parent=0x7f3fcc01f090 [GstMultiQueue|multiqueue167], pad_monitor=0x7f3fe809e7c0 [GstValidatePadMonitor|validatepadmonitor2213]) at ../subprojects/gst-devtools/validate/gst/validate/gst-validate-pad-monitor.c:2101
2 0x00007f406b40f46d in gst_validate_pad_monitor_src_event_func (pad=<optimized out>, parent=0x7f3fcc01f090 [GstMultiQueue|multiqueue167], event=0x7f3ff0007600 [GstEvent]) at ../subprojects/gst-devtools/validate/gst/validate/gst-validate-pad-monitor.c:2374
3 0x00007f406b904387 in gst_pad_send_event_unchecked (pad=pad@entry=0x7f3fdc027650 [GstPad|src_0], event=event@entry=0x7f3ff0007600 [GstEvent], type=<optimized out>, type@entry=GST_PAD_PROBE_TYPE_EVENT_UPSTREAM) at ../subprojects/gstreamer/gst/gstpad.c:5772
4 0x00007f406b90481b in gst_pad_push_event_unchecked (pad=pad@entry=0x7f4058182fc0 [GstPad|sink], event=event@entry=0x7f3ff0007600 [GstEvent], type=type@entry=GST_PAD_PROBE_TYPE_EVENT_UPSTREAM) at ../subprojects/gstreamer/gst/gstpad.c:5417
5 0x00007f406b90f016 in gst_pad_push_event (pad=0x7f4058182fc0 [GstPad|sink], event=event@entry=0x7f3ff0007600 [GstEvent]) at ../subprojects/gstreamer/gst/gstpad.c:5554
6 0x00007f406a1c99ba in gst_video_decoder_src_event_default (decoder=0x7f3fe81c6060 [GstTheoraDec|theoradec46], event=<optimized out>) at ../subprojects/gst-plugins-base/gst-libs/gst/video/gstvideodecoder.c:1532
7 0x00007f406b40f46d in gst_validate_pad_monitor_src_event_check (handler=0x7f406a1ca270 <gst_video_decoder_src_event>, event=0x7f3ff0007600 [GstEvent], parent=0x7f3fe81c6060 [GstTheoraDec|theoradec46], pad_monitor=0x7f4028163aa0 [GstValidatePadMonitor|validatepadmonitor2216]) at ../subprojects/gst-devtools/validate/gst/validate/gst-validate-pad-monitor.c:2101
8 0x00007f406b40f46d in gst_validate_pad_monitor_src_event_func (pad=<optimized out>, parent=0x7f3fe81c6060 [GstTheoraDec|theoradec46], event=0x7f3ff0007600 [GstEvent]) at ../subprojects/gst-devtools/validate/gst/validate/gst-validate-pad-monitor.c:2374
```
This make the GstSingleQueue a MiniObject, mainly so it is properly
refcounted.
This also make use of the GstMultiQueuePad class for srcpads which
is totally valid as srcpads and sinkpads share the same SingleQueue
object.
The `query` argument of gst_pad_query is "transfer none".
Query objects are "borrowed" by the pad query handlers and those
should never unref them.
This was leading to double freed queries in a very racy way with nested
GESTimelines.
Otherwise when seeking backwards we would keep the last_stop at the last
position we saw until playback passed the seek position again, and if
switching to the next pad happens in the meantime we would set the wrong
offset in the outgoing segment.
This URI is valid:
data:,;base64
(It encodes the literal string ";base64")
But would lead to a crash because the code assumed the semicolon would
be placed before the colon.
Quoting RFC 2396:
For resiliency, programs interpreting URI should treat upper case
letters as equivalent to lower case in scheme names (e.g., allow
"HTTP" as well as "http").
This seems to happen when another client is accessing the file at the
same time, and retrying after a short amount of time solves it.
Sometimes partial data is written at that point already but we have no
idea how much it is, or if what was written is correct (it sometimes
isn't) so we always first seek back to the current position and repeat
the whole failed write.
It happens at least on Linux and macOS on SMB/CIFS and NFS file systems.
Between write attempts that failed with EACCES we wait 10ms, and after
enough consecutive tries that failed with EACCES we simply time out.
In theory a valid EACCES for files to which we simply have no access
should've happened already during the call to open(), except for NFS
(see open(2)).
This can be enabled with the new max-transient-error-timeout property, and
a new o-sync boolean property was added to open the file in O_SYNC mode
as without that it's not guaranteed that we get EACCES for the actual
writev() call that failed but might only get it at a later time.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/issues/305
