souphttpsrc maintains two variables for the position:
* 'request_position' is where we want to be
* 'read_position' is where we are
During Normal operations both are updated in sync when data arrives. A seek
changes 'request_position' but not 'read_position'.
When the two positions get out of sync, then a new request is send and the
'Range' header is adjusted to the current 'request_position'.
Without this patch, if reading fails, then the source is destroyed. This
triggers a new request, but the range remains unchanged. As a result, the
old range is used and old data will be read.
Changing the 'read_position' to -1 makes it explicitly different from
'request_position' and as a result the 'Range' header is updated correctly.
https://bugzilla.gnome.org/show_bug.cgi?id=773509
GstAudioRingBuffer doesn't needs us to have at least 2 segments. We make
sure that if our buffer parameters are such that the maxlength is not at
least 2x fragsize, we still request the ringbuffer to keep that much
space so it continues to work.
https://bugzilla.gnome.org/show_bug.cgi?id=770446
If jackd changes the buffer size or sample rate, jackaudiosink hangs
and can't be stopped. This also happens if jack is configured as slave
and a gstreamer pipeline is started on the slave machine while the jack
master isn't running yet. If the the jack master is started it changes
the buffer size / sample rate and jackaudiosink can't be stopped.
This fix calls jack_shutdown_cb when jack_sample_rate_cb or
jack_buffer_size_cb is called.
https://bugzilla.gnome.org/show_bug.cgi?id=771272
https://github.com/mesonbuild/meson
With contributions from:
Tim-Philipp Müller <tim@centricular.com>
Jussi Pakkanen <jpakkane@gmail.com> (original port)
Highlights of the features provided are:
* Faster builds on Linux (~40-50% faster)
* The ability to build with MSVC on Windows
* Generate Visual Studio project files
* Generate XCode project files
* Much faster builds on Windows (on-par with Linux)
* Seriously fast configure and building on embedded
... and many more. For more details see:
http://blog.nirbheek.in/2016/05/gstreamer-and-meson-new-hope.htmlhttp://blog.nirbheek.in/2016/07/building-and-developing-gstreamer-using.html
Building with Meson should work on both Linux and Windows, but may
need a few more tweaks on other operating systems.
At the end of a range request, we don't want to return GST_FLOW_EOS otherwise
the last bytes we just read will be dropped by basesrc.
Instead just return GST_FLOW_OK (which was set just before) and let basesrc
handle the fact we are at the end of the segment.
If we're at the end of a range request, read again to let libsoup
finalize the request. This allows to reuse the connection again later,
otherwise we would have to cancel the message and close the connection.
We have to get rid of the message on EOS when the complete stream is read to
remember that we successfully finished handling this specific message.
Otherwise we will cancel it later and close the connection instead of reusing
it at a later time.
It might also make sense to reuse connections if a non-200 response is
received. As long as there was no connection error, the HTTP connection should
be re-usable.
There's no real reason to avoid sending QOS/NAVIGATION events upstrea.
Some elements might want to have that information.
Also remove downstream-only CAPS event handling and minimize code
Update the blocksize depending on how much is obtained from a read
of the input stream. This avoids doing too many reads in small chunks
when larger amounts of data are available and also prevents using
a very large memory area to read a small chunk of data.
https://bugzilla.gnome.org/show_bug.cgi?id=767833
The heuristic to choose between packetise or not was changed to use the
segment format. The problem is that this change is reading the segment
during the caps event handling. The segment event will only be sent
after. That prevented the decoder to go in packetize mode, and avoid
useless parsing.
https://bugzilla.gnome.org/show_bug.cgi?id=736252
The heuristic to choose between packetise or not was change to use the
segment format. The problem is that this change is reading the segment
during the caps event handling. The segment event will only be sent
after. That prevented the decoder to go in packetize mode, and avoid
useless parsing.
https://bugzilla.gnome.org/show_bug.cgi?id=736252
Previously the segment.time was wrong, and the position was not updated
correctly, resulting in seeks in PUSH mode with upstream providing a BYTES
segment to not work at all.
https://bugzilla.gnome.org/show_bug.cgi?id=767157
This fixes seeking in DV streams where upstream operates in PUSH mode with a
TIME segment (e.g. avidemux). Without this, we would generate wrong durations
and timestamps after a seek.
https://bugzilla.gnome.org/show_bug.cgi?id=767157
When early returning in gst_soup_http_src_read_buffer() because the
element is FLUSHING, we need to unmap and unref the buffer which was just created.
https://bugzilla.gnome.org/show_bug.cgi?id=766718
Directly setting audio/x-raw caps leads to problems when the delivered
data blocks do not align properly at sample boundaries (for example, a
data block with 391 bytes). So, instead, set audio/x-unaligned-raw to
let a parser be autoplugged.
https://bugzilla.gnome.org/show_bug.cgi?id=689460
Non-blocking read will return the amount of data available without
blocking to wait for the full requested size.
The downside is that now it souphttpsrc needs to have a waiting
mechanism in case there is no data available yet to avoid busy
looping arond the inputstream.
The previous ones resulted in odd display aspect ratios and were different
from the ones used by e.g. ffmpeg. The new ones now result in display aspect
ratios of 4:3 and 16:9.
https://bugzilla.gnome.org/show_bug.cgi?id=765946
When a frame's duration is too low, calling gst_util_uint64_scale()
to scale its value can result into it being truncated to zero, which
will cause the vpx encoder to return an VPX_CODEC_INVALID_PARAM error
when trying to encode.
To prevent this from happening, we simply ignore the duration when
encoding if it becomes zero after scaling, logging a warning message.
https://bugzilla.gnome.org/show_bug.cgi?id=765391
This reverts commit 0dd46accf6.
With some audiosinks, starting the ringbuffer on the first commit
causes audio glitches at startup by starting to output segments
from the ringbuffer before it has been filled / fully prerolled. This
doesn't usually happen with pulsesink because we map the pulseaudio
ringbuffer directly, but we should keep things consistent with
other sinks with regards to startup latency, plus it gives more
headway to avoid glitching, should the initial 2nd segment take
more than 10ms to generate.
https://bugzilla.gnome.org/show_bug.cgi?id=657076
Remove calls to gst_pad_has_current_caps() which then go on to call
gst_pad_get_current_caps() as the caps can go to NULL in between. Instead just
use gst_pad_get_current_caps() and check for NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=759539
We already pass the entire frame to the decoder. If the decoder ask for
more data, don't pass the same data again as this leads to infinit loop.
Instead, simply fail the fill function to signal the problem with that
frame. It will then be skipped properly.
https://bugzilla.gnome.org/show_bug.cgi?id=761670
All code paths for handle_frame() must somehow take ownership of the frame, be
it by actually unreffing, forwarding the frame elsewhere or storing it for
later.
http://bugzilla.gnome.org/show_bug.cgi?id=760666
With the VPX decoders it's not simple to use downstream buffer pool,
because we don't know the image size and alignment when buffers get
allocated. We can though use GstAllocator (for downstream, or the system
allocator) to avoid a copy before pushing if downstream supports
GstVideoMeta. This would still cause a copy for sink that requires
specialized memory and does not have a GstAllocator for that, though
it will greatly improve performance for sink like glimagesink and
cluttersink. To avoid allocating for every buffer, we also use a
internal buffer pool.
https://bugzilla.gnome.org/show_bug.cgi?id=745372
This adds an automatic mode to the threads property of vpxdec in order to
use as many threads as there is CPU on the platform. This brings back
GStreamer VPX decoding performance closer to what is achieved by other
players, including Chromium.
https://bugzilla.gnome.org/show_bug.cgi?id=758195
When jpeg_finish_decompress is called, output state reference is being created.
But if there is any failures in finishing decompress, it jumps to setjmp,
and at that point state was not referenced. Resulting in leak of output state.
Hence adding another setjmp after output state is referenced.
Similarly adding another setjmp to unmap the frame in case error happens before
finish_decompress
https://bugzilla.gnome.org/show_bug.cgi?id=753087
The problem is that the filesrc and souphttpsrc are behaving
differently regarding the calculation of the segment boundaries. The
filesrc is using a non-inclusive boundaries, while the souphttpsrc
uses inclusive. Currently the hlsdemux calculates the boundaries as
inclusive, so for this reason there is no problem with the souphttpsrc,
but there is an issue in the filesrc.
The GstSegment is non-inclusive, so the proposed solution is to use
non-inclusive boundaries in the hlsdemux in order to be consistent.
Make the change in the hlsdemux, will break the souphttpsrc, which
will expect inclusive boundaries, but the hlsdemux will offer
non-inclusive. This change makes sure that the non-inclusive
boundaries are converted to inclusive.
https://bugzilla.gnome.org/show_bug.cgi?id=748316
These allow a failed request to be retried after the given number of seconds
instead of failing the pipeline. Take account of the Retry-After header if
present. Add retries parameter that controls the number of times an HTTP
request will be retried before failing.
https://bugzilla.gnome.org/show_bug.cgi?id=756318
If soup message is not created then the same should not be passed
on, which is resulting in segfault. Hence throwing a warning message
and returning
https://bugzilla.gnome.org/show_bug.cgi?id=755326
We don't necessarily have full control over the input tags, so
it's possible that the ISRC tag contains a longer string than
expected, in which case we'd write over the end of the static-size
13 byte buffer that is FLAC__StreamMetadata_CueSheet_Track::isrc.
Make sure to only copy the ISRC if it's not too long, and make
sure the buffer we write to is always NUL-terminated by using
g_strlcpy().
CID 1324931.
When passing the taglist to gst_audio_decoder_merge_tags, the reference is increased
by audiodecoder and the caller should free the taglist being passed.
https://bugzilla.gnome.org/show_bug.cgi?id=753903
Should just compare with what can be immediatelly accepted by
the element. flacenc can't renegotiate so if it has a caps already
it should only accept if it is that caps otherwise just use the
template caps
Removes the need for custom caps query handling and makes it more
correct from the beginning on the template. It is a bit uglier
to read because there is 1 entry per channel but makes code easier
to maintain.
Some files may provide different caps insight of one stream. Since
vp9enc support caps reinit, we should support cache reinit too.
If more then file cache file will be created, the naming will be:
cache cache.1 cache.2 ...
Based on patch by: Oleksij Rempel <linux@rempel-privat.de>
https://bugzilla.gnome.org/show_bug.cgi?id=747728
Some files may provide different caps insight of one stream. Since vp8enc
support caps reinit, we should support cache reinit too.
If more then file cache file will be created, the naming will be:
cache
cache.1
cache.2
...
https://bugzilla.gnome.org/show_bug.cgi?id=747728
To allow souphttpsrc to be use HTTP methods other than GET
(e.g. HEAD), add a "method" property that is a string. If this
property is not set, GET is used.
https://bugzilla.gnome.org/show_bug.cgi?id=752413
1) If the system http_proxy environment variable is not set
or set to an empty string, we must not set proxy to avoid
http connection error.
2) In case of proxy property setting, if user want to clear
the proxy setting, they should be able to set it to NULL or
an empty string again, so this is fixed too.
3) Check if the proxy string was parsed correctly.
https://bugzilla.gnome.org/show_bug.cgi?id=752866
for files which have corrupted header, libflac is not able to
process the metadata properly. We just try to ignore the error
and continue with the processing, since metadata parsing is not
making much of a difference to libflac
https://bugzilla.gnome.org/show_bug.cgi?id=751334
