In baseparse we set the fixed caps flag on all src pads, therefore the
source pad caps query in get_allowed_caps will return the current caps.
Current caps won't necessarily intersect with the new caps (e.g. sample
rate change). Replace get_allowed_caps with peer_query_caps.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/816>
This should result in no worse accuracy than the base parse element, and may
result in better accuracy. In particular, the number of bytes processed at any
given point, as accumulated by baseparse, can be only accurate to
(1 / # of frames) bytes per second, and if we try to seek immediately after
pausing the pipeline to a large offset, this small inaccuracy can propagate to
something noticeable.
The use case that prompted this patch is a 45-minute MPEG-1 layer 3 file, which
has a constant bit rate but no seek tables. Trying to seek the pipeline
immediately after pauisng it, without the ACCURATE flag, to a location 41
minutes in, yields a location that is, even with <https://gitlab.freedesktop.org/gstreamer/gstreamer/merge_requests/374>,
still audibly incorrect. This patch yields a much closer position, no longer
audibly incorrect, and likely within a frame of the most correct position.
Each FLAC metadata block starts with a flag denoting whether it is the
last metadata block. The existing flacparse code moves any existing
VORBISCOMMENT block to immediately follow the STREAMINFO block without
changing any block's last-metadata-block flag. If no VORBISCOMMENT block
exists, it created one with the last-metadata-block flag set to true.
This results in gstflacdec sometimes giving bad headers to libflac when
trying to play perfectly valid FLAC files depending on the file's
metadata ordering. Depending on the contents of the other metadata
blocks, current versions of libflac may or may not return
FLAC__STREAM_DECODER_ERROR_STATUS_BAD_HEADER when given this broken
metadata. This is most noticeable with files that have a large cover art
image attached where VORBISCOMMENT is the very last metadata block with
no PADDING afterwards.
This patch changes that behavior so that:
1. For FLAC files that already have a VORBISCOMMENT block, the metadata
order is preserved.
2. For FLAC files that do not have a VORBISCOMMENT block, the generated
dummy VORBISCOMMENT is placed immediately after STREAMINFO and
inherits the last-metadata-block flag from STREAMINFO.
https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/issues/484
The pre_push_frame default clipping behaviour was introduced in 2010
with commit 30be03004e and modified with commit 4163969a24 in 2011,
when most parsers didn't implement a pre_push_frame yet. Not having it
meant that clipping was done by default. Those that did implement a
pre_push_frame (flacparse and mpegaudioparse) at the time, had the flag
adjusted as part of the 2011 refactor work.
All other parsers got a pre_push_frame vfunc implementation only in
2013, but seem to have forgot to keep the clipping behaviour, as
was done automatically when a pre_push_frame implementation doesn't
exist for the parser. aacparse lost it with commit 91d4abcea in
July 2013; the others in Dec 2013 as part of AUDIO_CODEC tag posting
in commits 6f89b430e, d2ab5199b, 29f2cae12, 753d3c23a and 292780574.
Accept wavpack correction streams (.wvc) on sink pad, so
that wavpackparse can also be used to packetise correction
streams.
Fix parsing of subblock ID tags - the higher bits are
flags and are not part of the ID. This resulted in
correction blocks not being recognised properly and
the output not having the right (correction) caps.
After a CAPS event, in theory a new stream can start and it might start
with the FLAC headers again. We can't detect FLAC headers in the middle
of the stream, so we drain the parser to be able to detect either FLAC
headers after the CAPS event or the continuation of the previous stream.
This fixes for example
gst-launch-1.0 audiotestsrc num-buffers=200 ! flacenc ! c. \
audiotestsrc num-buffers=200 freq=880 ! flacenc ! c. \
concat name=c ! rtpgstpay ! udpsink host=127.0.0.1 port=5000
gst-launch-1.0 udpsrc multicast-group=127.0.0.1 port=5000 \
caps=application/x-rtp,media=application,clock-rate=90000,encoding-name=X-GST ! \
rtpgstdepay ! flacparse ! flacdec ! audioconvert ! pulsesin
Raw AAC streams might have very small frames, e.g. 6 byte frames
when encoding silence. These frames are then smaller than aacparse's
default min_frame_size of 10 bytes (ADTS_MAX_SIZE).
When passthrough is disabled or aacparse has to output ADTS, GstBaseParse
will concatenate these short frames to the following frame before
handling them to aacparse, which processes each input buffer as a single
frame, producing bad output.
To avoid this problem, set the min_frame_size to 1 when receiving a raw
stream.
https://bugzilla.gnome.org/show_bug.cgi?id=792644
Otherwise baseparse will incrementally send us bigger buffers until the
full header size is reached, which is not only pointless but also means
that baseparse will reallocate and copy into a bigger buffer for every
input buffers. In pull mode that's done in 64kb increments, in push mode
usually in much smaller increments, causing a lot of overhead for
example when parsing high-quality coverart.
Fix chain function not handling not-linked from baseparse.
When an input data is separated into 2 buffers, the second buffer
would not be pushed into the adapter if baseparse returns not-linked
for first buffer.
This caused glitches when switching streams and selecting
a stream that was previously unselected.
https://bugzilla.gnome.org/show_bug.cgi?id=786268
AudioSpecifigConfig is used in a variety of AAC streams but was
being parsed differently. Instead, make everyone use the same parsing.
* Remove unused 'bits' field (it was always set to 0 if present)
* Add proper GAConfig parsing (to know the number of samples per frame
if present).
Fixes wrong rate/channels configuration in streams coming from qtdemux
https://bugzilla.gnome.org/show_bug.cgi?id=780966
According to ISO/IEC:14496-2:2009 , in the case of HE-AACv2 (audioObjecType
29) parametric stereo is used (a single mono track is used and then
transformations are applied to it to provide a stereo output).
We therefore report two channels in the case where there is one reported
in the audioChannelConfiguration.
Fixes the various issues where a demuxer would report two channels, but
then the parser would say there's only one channel, and then the decoder
would output two channels.
This breaks gst-validate on the build server (though not locally),
and a unit test, and I can't run unit tests right now for some
unrelated reason.
This reverts commit 0747b56f8e.
gstmpegaudioparse.c: In function ‘gst_mpeg_audio_parse_reset’:
gstmpegaudioparse.c:209:3: error: ‘memset’ used with length equal to number of elements without multiplication by element size [-Werror=memset-elt-size]
memset (mp3parse->xing_seek_table_inverse, 0, 256);
^~~~~~
gstmpegaudioparse.c: In function ‘gst_mpeg_audio_parse_handle_first_frame’:
gstmpegaudioparse.c:951:7: error: ‘memset’ used with length equal to number of elements without multiplication by element size [-Werror=memset-elt-size]
memset (mp3parse->xing_seek_table_inverse, 0, 256);
^~~~~~
aacparse resizes input buffer while converting ADTS stream to RAW,
During buffer resize buffer write permission is not checked.
This throws gst_buffer_is_writable assertion and leads to AV sync issue some times.
It is corrected by making buffer writeable using gst_buffer_make_writable
https://bugzilla.gnome.org/show_bug.cgi?id=774129
https://github.com/mesonbuild/meson
With contributions from:
Tim-Philipp Müller <tim@centricular.com>
Jussi Pakkanen <jpakkane@gmail.com> (original port)
Highlights of the features provided are:
* Faster builds on Linux (~40-50% faster)
* The ability to build with MSVC on Windows
* Generate Visual Studio project files
* Generate XCode project files
* Much faster builds on Windows (on-par with Linux)
* Seriously fast configure and building on embedded
... and many more. For more details see:
http://blog.nirbheek.in/2016/05/gstreamer-and-meson-new-hope.htmlhttp://blog.nirbheek.in/2016/07/building-and-developing-gstreamer-using.html
Building with Meson should work on both Linux and Windows, but may
need a few more tweaks on other operating systems.
This reverts commit 4065fcb80a.
flacparse should not push tags by itself, the base class is going to do that
while properly merging in upstream tags. It just didn't because of a bug in
the base class, which was hidden by this commit.
https://bugzilla.gnome.org/show_bug.cgi?id=763553
