Sebastian Dröge
093a27fea3
omxaudioenc: Minor code refactoring
2011-11-08 08:31:58 +01:00
Sebastian Dröge
ae6616ad0d
omxvideoenc: Minor code refactoring
2011-11-08 08:31:43 +01:00
Sebastian Dröge
d4eb77fa2b
omxvideodec: Make sure to always release buffers back to OMX
2011-11-08 08:31:32 +01:00
Sebastian Dröge
1d071c05dc
omx: Also properly release buffers when in error state
2011-11-08 08:24:49 +01:00
Jonas Larsson
0682012181
omx: Properly release buffers during flushing
...
We can't pass them back to OMX_FillThisBuffer() or OMX_EmptyThisBuffer()
but instead of doing nothing we have to put them back into our queue.
Otherwise the buffer is leaked and we will have too few buffers in
the future.
2011-11-08 08:24:49 +01:00
Sebastian Dröge
9151617d39
omxvideodec: Free pending frames after draining component
2011-11-07 14:00:47 +01:00
Sebastian Dröge
0b301021de
omxvideoenc: Free pending frames after draining the component
2011-11-07 14:00:35 +01:00
Sebastian Dröge
636cdd31bf
omxvideoenc: Make handling and usage of the base video codec frames threadsafe
2011-11-07 11:07:01 +01:00
Sebastian Dröge
9a6cea5af3
omxvideoenc: Fix deadlock between srcpad stream lock and ::reset()
2011-11-07 11:05:29 +01:00
Sebastian Dröge
95b06504f9
omxvideoenc: Make handling and usage of the base video codec frames threadsafe
2011-11-07 11:04:27 +01:00
Sebastian Dröge
a80ca97ec3
omxvideoenc: Free all pending frames after draining the component
2011-11-07 10:58:44 +01:00
Sebastian Dröge
be1f75d2f4
omxvideodec: Always free all pending frames when caps changes require reconfiguration
2011-11-07 10:58:24 +01:00
Sebastian Dröge
0c0aa78373
omxaudioenc: Only drain the component a single time and only after processing started
2011-11-04 09:44:04 +01:00
Sebastian Dröge
d5371b9208
omxvideodec: Only drain the component a single time and only after processing started
2011-11-04 09:44:04 +01:00
Sebastian Dröge
3a17d11109
omxvideoenc: Only drain the component a single time and only after processing started
2011-11-04 09:44:04 +01:00
Sebastian Dröge
fa6881c1cc
omx: Reset buffer flags to 0 after it was consumed by the component or the element
...
Some implementations don't reset the flags and the standard is not
really clear on the expected behaviour. Let's just always reset the
flags as they're not valid at this point anymore.
2011-11-04 09:04:16 +01:00
Sebastian Dröge
ef67a43702
omxvideoenc: Better handling of encoder parameters
...
Only set them if necessary and allow to use the component
defaults.
2011-11-02 13:50:14 +01:00
Sebastian Dröge
08fabd6a07
omxvideoenc: Make unsupported bitrate/quantizer settings less fatal
2011-11-02 13:22:50 +01:00
Sebastian Dröge
ec9dde48e5
omxvideodec: If no stride was set for the OMX output port assume GStreamer stride
...
This is not really correct but there's nothing else we could do.
2011-11-02 10:39:50 +01:00
Sebastian Dröge
7ebef2941b
omxvideoenc: If no stride was set for the OMX input port assume GStreamer stride
...
This is not really correct but there's nothing else we could do.
2011-11-02 10:39:10 +01:00
Sebastian Dröge
1ef38751c7
omxaudioenc: Implement draining of the component and use it
...
This makes sure that all buffers are encoded and pushed downstream
before flushing the ports and losing some buffers.
2011-11-01 16:46:09 +01:00
Sebastian Dröge
8eaf25c10e
omxvideoenc: Implement draining of the component and use it
...
This makes sure that all buffers are encoded and pushed downstream
before flushing the ports and losing some buffers.
2011-11-01 16:41:46 +01:00
Sebastian Dröge
e4b7ffcc1b
omxvideodec: Implement draining of the component and use it
...
This makes sure that all buffers are decoded and pushed downstream
before flushing the ports and losing some buffers.
2011-11-01 16:23:22 +01:00
Sebastian Dröge
2f2c17a1b5
omxvideodec: Fix deadlock if ::reset is called before finding the corresponding frame of a decoded buffer
2011-11-01 16:23:22 +01:00
Sebastian Dröge
f93a45fb66
omxaudioenc: Forward downstream flow returns to upstream
2011-11-01 15:10:12 +01:00
Sebastian Dröge
21faf556ff
omxvideoenc: Forward downstream flow returns to upstream
2011-11-01 15:10:01 +01:00
Sebastian Dröge
3b4260e54f
omxvideodec: Forward downstream flow returns to upstream
2011-11-01 13:58:38 +01:00
Sebastian Dröge
f631097284
omx: Add minimal README file
2011-10-25 14:24:59 +02:00
Sebastian Dröge
10a5680692
omxvideodec: Fix deadlock caused by calling reset while the loop function does something with the base video codec stream lock
2011-10-20 15:21:07 +02:00
Sebastian Dröge
6689faa661
omxvideoenc: Fix deadlock caused by calling reset while the loop function does something with the base video codec stream lock
2011-10-20 15:20:47 +02:00
Sebastian Dröge
cf6f14d03c
omxvideodec: Move locking at the correct place
2011-10-20 14:30:38 +02:00
Sebastian Dröge
72fa93956b
omx: Remove QCOM hack to reset nOffset in EmptyBufferDone
...
This is now done in a generic way that does not require any
hacks because it will work without any side effects on any
OMX implementation.
2011-10-14 10:27:47 +02:00
Sebastian Dröge
2750a8869b
omx: Reset nOffset to 0 in EmptyBufferDone if nFilledLen is 0
...
Some OMX implementations don't reset nOffset when the complete
buffer is emptied but instead only reset nFilledLen. We reset
nOffset to 0 if nFilledLen == 0, which is safe to do because
the offset *must* be 0 if the buffer is not filled at all.
Seen in QCOM's OMX implementation.
2011-10-14 10:26:21 +02:00
Sebastian Dröge
ac8085dce9
omxvideoenc: If one parameter/configuration is not supported don't skip the next
2011-10-10 10:38:29 +02:00
Sebastian Dröge
37967b4316
omxh264dec: Require stream-format=byte-stream
...
Other stream-formats are unlikely to be supported by OMX components.
2011-10-03 09:13:29 +02:00
Sebastian Dröge
bb1dd8aaba
omxvideodec: Add API for subclasses to prepare/convert frames
2011-09-29 10:44:20 +02:00
Sebastian Dröge
febb83ec54
omxaudioenc: Switch to Idle first and wait before switching to Loaded and deallocating buffers
...
Allocating buffers before the Idle state is reached can lead to crashes.
2011-09-28 10:35:38 +02:00
Sebastian Dröge
e364088596
omxvideoenc: Switch to Idle first and wait before switching to Loaded and deallocating buffers
...
Allocating buffers before the Idle state is reached can lead to crashes.
2011-09-28 10:35:37 +02:00
Sebastian Dröge
ab9ce7db7d
omxvideodec: Switch to Idle first and wait before switching to Loaded and deallocating buffers
...
Allocating buffers before the Idle state is reached can lead to crashes.
2011-09-28 10:35:37 +02:00
Sebastian Dröge
792cdb7d1f
omxvideodec: New hack for QCOM to recreate the component instead of reconfiguring it on caps changes
2011-09-28 10:35:31 +02:00
Sebastian Dröge
a7f77e22a4
omx: Change a g_assert() into a GST_WARNING_OBJECT()
2011-09-27 12:28:22 +02:00
Sebastian Dröge
837fc4ca66
omx: Add hack for Qualcomm's OMX implementation to manually reset nOffset in EmptyBufferDone
2011-09-26 13:05:23 +02:00
Sebastian Dröge
7dbf68a232
omxaudioenc: Add a check to prevent a zero-sized OMX buffer
2011-09-23 17:04:15 +02:00
Sebastian Dröge
d5452a53b0
omxvideoenc: Add some more checks for correct OMX buffer sizes
2011-09-23 17:04:14 +02:00
Sebastian Dröge
5659bd3b4f
omxvideodec: Add some more checks for OMX buffer sizes
2011-09-23 16:40:30 +02:00
Sebastian Dröge
f0fe1148b7
omx: Wait until the Executing state is reached before calling OMX_FillThisBuffer()
...
This correctly works around the QCOM race condition that happens when calling
FTB after setting the new state and before reaching it.
2011-09-14 10:16:41 +02:00
Sebastian Dröge
3ba45aa0af
omxvideodec: Negotiate video format with downstream and what the component claims to support
2011-09-02 14:43:43 +02:00
Vincent Penquerc'h
fa2dff1ad6
basevideoencoder: fix element leak
...
and this concludes an hour of yelling at the bloody test failing,
only to track down the problem not being in the test.
https://bugzilla.gnome.org/show_bug.cgi?id=657368
2011-08-26 10:27:16 +02:00
Sebastian Dröge
9eb39ceef2
omxvideoenc: Release basevideocodec stream lock while waiting for a buffer
...
This prevents deadlocks if no empty input buffers are available and
releasing input buffers requires the loop function to handle some
output buffers first.
2011-08-19 09:23:58 +02:00
Sebastian Dröge
e583c48222
omxvideodec: Release basevideocodec stream lock while waiting for a buffer
...
This prevents deadlocks if no empty input buffers are available and
releasing input buffers requires the loop function to handle some
output buffers first.
2011-08-19 09:23:54 +02:00