Tim-Philipp Müller
a81a158f17
invtelecine: fix print format in debug message
2010-04-08 01:42:23 +01:00
Arun Raghavan
90753ceb5e
baseparse: Don't emit bitrate tags too early
...
We wait to parse a minimum number of frames (10, arbitrarily) before
emiting bitrate tags so that our early estimates are not wildly
inaccurate for streams that start with a silence. If the stream ends
before that, we just emit the tags anyway.
While it _would_ be nicer to be specify the threshold to start pushing
the tags in terms of duration, this would introduce more complexity than
this merits.
https://bugzilla.gnome.org/show_bug.cgi?id=614991
2010-04-07 11:51:46 +02:00
Sebastian Dröge
1306160b79
mpegtsdemux: Add support for BlueRay style DTS
...
Fixes bug #614259 .
2010-04-05 10:33:26 +02:00
Sebastian Dröge
074d20cf99
mpegtsdemux: Add support for the two DTS HD stream types
...
Fixes bug #614259 .
2010-04-04 20:23:00 +02:00
Sebastian Pölsterl
d7ab75abb8
mpegtspacketizer: Additionally use the CRC to check if tables are duplicates
...
The current code just uses table id, subtable extension and version number to
check if the section has been seen before. However, this comparison is not
sufficient, causing actually new tables being dismissed.
Fixes bug #614479 .
2010-04-02 19:52:25 +02:00
Sebastian Dröge
c55b24b43d
h264parse: Correctly clean up internal state for reuse
...
Fixes bug #614591 .
2010-04-02 19:48:56 +02:00
Sebastian Dröge
129042b65c
mpegtsparse: Make sure that the buffer metadata is writable before setting caps
...
Fixes bug #614349 .
2010-04-02 19:19:23 +02:00
Tim-Philipp Müller
840e1c5209
build: build plugins and examples in parallel where possible, if make -jN is used
2010-03-30 01:17:15 +01:00
Tim-Philipp Müller
4162f0d58e
qtmux: use GStreamer package name and origin in the plugin info
2010-03-30 00:46:51 +01:00
Mark Nauwelaerts
7d2e248155
h264parse: fix writing NALU prefix for byte-stream output format
...
Specifically, input may already be in byte-stream format, so sync
bytes should not be misinterpreted as NALU size.
2010-03-29 14:49:06 +02:00
Sebastian Dröge
09223cc719
flacparse: Optionally check the overall frame checksums too before accepting a frame as valid
...
This is optional because it's a quite expensive operation and it's very
unlikely that a non-frame is detected as frame after the header CRC check
and checking all bits for valid values. The overall frame checksums are
mainly useful to detect inconsistencies in the encoded payload.
2010-03-26 18:58:35 +01:00
Sebastian Dröge
9fa738d36b
flacparse: Check the CRC-8 of the headers before accepting a frame as valid
...
This makes false-positives during seeking much less likely and detection of
them much faster.
2010-03-26 18:42:28 +01:00
Sebastian Dröge
6663e7c1ca
baseparse: Set the last stop to the buffer starttime if the duration is invalid
...
...instead of not setting it at all.
2010-03-26 18:20:24 +01:00
Joshua M. Doe
af00e59528
baseparse: Send NEWSEGMENT event with correct start and position
...
Instead of taking the last stop (which could be buffer endtime instead
of starttime) always take the buffer starttime.
Fixes bug #614016 .
2010-03-26 18:19:00 +01:00
Arun Raghavan
cc6c4ef00b
flacparse: Fix buffer refcount issue
...
When called from the GST_FLAC_PARSE_STATE_HEADERS case,
gst_flac_parse_hand_headers() does a gst_buffer_set_caps() on a buffer
with refcount > 1. This change handles this case by making the buffer
metadata_Writable.
https://bugzilla.gnome.org/show_bug.cgi?id=614037
2010-03-26 18:14:22 +01:00
Tim-Philipp Müller
eb34b2015b
mpegtsdemux: add missing space to debug message
2010-03-26 12:04:48 +00:00
Stefan Kost
16f532b71a
dtmfdetect: if we tell that we handle gap flags, then do so
2010-03-25 23:01:42 +02:00
Stefan Kost
88b223d36b
dtmfdetect: use glib types
2010-03-25 23:01:05 +02:00
Stefan Kost
de4a6adf80
dtmfdetect: fix classification
2010-03-25 23:01:05 +02:00
Stefan Kost
4f526f8aef
dtmfdetect: reformat message docs
...
Use a list like in other element docs as an untweaked docbook table look ugly.
2010-03-25 23:00:00 +02:00
Tim-Philipp Müller
d6f3ee4b90
audioparsers: remove unused GstBaseParseClassPrivate structure
2010-03-25 17:13:51 +00:00
Arun Raghavan
76f5d96e06
flacparse: Make bitrate estimation more accurate
...
This implements the get_frame_overhead() vfunc so that baseparse can
make more accurate bitrate estimates.
2010-03-25 16:57:55 +01:00
Arun Raghavan
599401a7f9
aacparse: Fix bitrate calculation
...
This patch adds the get_frame_overhead() vfunc so that baseparse can
accurately calculate the min/avg/max bitrates for aacparse.
Note: The bitrate was being incorrectly calculated for ADTS streams
(it's not in the header as the code suggests).
2010-03-25 16:57:48 +01:00
Arun Raghavan
88c1e42567
audioparsers: Add bitrate calculation to baseparse
...
This makes baseparse keep a running average of the stream bitrate, as
well as the minimum and maximum bitrates. Subclasses can override a
vfunc to make sure that per-frame overhead from the container is not
accounted for in the bitrate calculation.
We take care not to override the bitrate, minimum-bitrate, and
maximum-bitrate tags if they have been posted upstream. We also
rate-limit the emission of bitrate so that it is only triggered by a
change of >10 kbps.
2010-03-25 16:57:36 +01:00
Tim-Philipp Müller
0c97f9a9be
qtmux: init debug category before using it
2010-03-25 00:20:54 +00:00
Stefan Kost
4a87fee780
jpegformat: add blank line to fix generated xml
2010-03-24 16:25:43 +02:00
Tristan Matthews
552cd26b43
osx: more compiler warning fixes
...
Avoid new warnings.
Fixes #613758 .
2010-03-24 00:19:02 +00:00
Benjamin Otte
a9a7b8e372
Fixes for -Waggregate-return
...
The flag wasn't added due to libexif using aggregate return values.
2010-03-23 01:16:25 +01:00
Stefan Kost
5ebf6444cb
i18n: build fixes: #if -> #ifdef for ENABLE_NLS
2010-03-22 18:07:45 +02:00
Benjamin Otte
240f494aa7
Add -Wold-style-definition
...
and fix the warnings
2010-03-22 16:56:03 +01:00
Benjamin Otte
647cf64c01
Add -Wformat-nonliteral -Wformat-security flags
...
and fix the warnings
2010-03-22 16:22:22 +01:00
Arun Raghavan
8144fee47c
mpegvideoparse: Parse bitrate and emit as tag
...
This patch picks up the bitrate for the stream from the MPEG sequence
header and emits it as a tag on the source pad.
Fixes #599298 .
2010-03-22 12:44:54 +00:00
Benjamin Otte
33c2f5fb01
Add -Wwrite-strings
...
and fix its warnings
2010-03-22 13:16:33 +01:00
Benjamin Otte
010789159d
Add -Wundef
...
and fix the warnings
2010-03-22 12:30:01 +01:00
Benjamin Otte
b7655bbd2e
Add -Wredundant-decls flag
...
and fix warnings from it
2010-03-22 12:05:59 +01:00
Benjamin Otte
f96e4f1581
Add -Wmissing-declarations -Wmissing-prototypes to configure flags
...
And fix all warnings
2010-03-21 21:39:18 +01:00
Benjamin Otte
46f4c7a6c1
siren: Run gst-indent script
...
Includes running dos2unix on decoder.c
2010-03-21 21:37:37 +01:00
Benjamin Otte
27b3e53d5d
legacyresample: remove unused file
2010-03-21 18:59:30 +01:00
Wim Taymans
e30f38531c
sdpdemux: disable loop and auto multicast join
...
Disable loopback of packets.
Disable autojoin of multicast groups in the sink because the source already
does that on the shared socket.
2010-03-19 11:13:30 +01:00
Benjamin Otte
775c7584fd
gst_element_class_set_details => gst_element_class_set_details_simple
2010-03-18 22:46:41 +01:00
Benjamin Otte
5258d372be
virtualdub: Remove
...
THe plugin is so hopelessly outdated, it's just not worth keeping.
2010-03-18 22:46:41 +01:00
Tim-Philipp Müller
cadb0526d5
mpegtsdemux: fix minor memory leak in property getter
...
Don't leak the string returned by g_strjoinv(). While we're at it,
use GString to assemble the string to be returned.
2010-03-15 19:21:52 +00:00
Sebastian Dröge
5fe85915be
imagefreeze: Only start the task after a seek if a buffer was received already
2010-03-15 11:54:33 +01:00
Tim-Philipp Müller
e0175a40a2
asfmux: fix typo in property description
2010-03-13 18:55:22 +00:00
Raimo Järvi
46abe733c6
mpegvideoparse: Update caps when the sequence header changes
...
Fixes bug #612687 .
2010-03-13 06:03:32 +01:00
Mark Nauwelaerts
6631f50d59
camerabin: activate video bin before feeding data to it
...
Fixes #612615 .
2010-03-12 19:30:48 +01:00
Thiago Santos
ca30c1d915
qtmux: Use xmp on mp4mux and gppmux too
...
Do not restrict xmp to qtmux, but use it too
on mp4mux and gppmux
2010-03-12 11:50:48 -03:00
Edward Hervey
69a40a1591
jpegparse: Fix unitialized variable on macosx 10.5
2010-03-12 09:52:57 +01:00
Stefan Kost
3b78cc5eca
jpegformat: add xmp reading and writing support
...
Bump needed base version for new xmp helper library. Use xmp helpers in
jpegparse and jifmux.
2010-03-12 10:35:15 +02:00
Sebastian Dröge
7efecfc961
segmentclip: Add audio/video buffer segment clip elements
...
These elements clip the audio/video buffers to the configured segment
for the case when the upstream elements don't do this correctly.
2010-03-12 07:29:58 +00:00