mirrors/gstreamer
mirrors/gstreamer
1
1
Fork 0
mirror of https://gitlab.freedesktop.org/gstreamer/gstreamer.git synced 2024-11-30 21:51:09 +00:00
Code Issues 1 Projects Releases Wiki Activity
13786 commits 44 branches 1509 tags 464 MiB
Commit graph

7422 commits

Author SHA1 Message Date
Wim Taymans
d4892859d4 jitterbuffer: fix race in flush-start/flush-stop 
When flush-stop arrives before we process the result of the _push() in the
loop function, we might pause even though we are not flushing anymore. Fix this
race by waiting for the srcpad loop function to completely pause after doing the
flush-start.
 2013-10-04 12:35:18 +02:00
Mathieu Duponchelle
ef548c2b28 videomixer: Update videoconvert copy 
https://bugzilla.gnome.org/show_bug.cgi?id=709390
 2013-10-04 10:57:36 +02:00
Mathieu Duponchelle
3d780c5c6d videomixer: Check if the pad needs reconfiguration in collected 
https://bugzilla.gnome.org/show_bug.cgi?id=709384
 2013-10-04 10:53:26 +02:00
Sebastian Dröge
21947f9d13 qtdemux: Add support for the mp2v fourcc for MPEG-2 video 
https://bugzilla.gnome.org/show_bug.cgi?id=709270
 2013-10-03 11:59:25 +02:00
Ognyan Tonchev
30f62a2eec matroskademux: Fix memory leak 
https://bugzilla.gnome.org/show_bug.cgi?id=709266
 2013-10-02 16:17:33 +02:00
Sreerenj Balachandran
e779b6587b qtdemux: Add HEVC support 
https://bugzilla.gnome.org/show_bug.cgi?id=709093
 2013-10-02 11:54:24 +02:00
Ognyan Tonchev
93d5e182d2 rtpgstpay: Fix memory leak 
We were leaking the GList nodes of the pending buffers.

https://bugzilla.gnome.org/show_bug.cgi?id=709079
 2013-10-02 11:07:16 +02:00
Wim Taymans
00056965e8 rtpjitterbuffer: fix race when updating the next_seqnum 
If we were not waiting for the missing seqnum when we insert the lost packet
event in the jitterbuffer, we end up not updating the next_seqnum and wait
forever for the lost packets to arrive. Instead, keep track of the amount of
packets contained by the jitterbuffer item and update the next expected
seqnum only after pushing the buffer/event. This makes sure we correctly handle
GAPS in the sequence numbers.
 2013-09-30 12:31:00 +02:00
Wim Taymans
fde438791e rtpjitterbuffer: small debug improvement 2013-09-30 12:30:23 +02:00
Wim Taymans
6e7d547be4 rtpjitterbuffer: reset skew does not reset clock-rate 
Don't reset the clock-rate when we reset the skew correction algorithm.
Reset the skew correction algorithm when we change the clock-rate.
 2013-09-30 11:53:08 +02:00
Wim Taymans
03d520eb69 rtpjitterbuffer: pause timer when PAUSED 
Also pause the timer when we go to the PAUSED state. It is possible that we
don't have a clock or base-time in PAUSED to perform the timeouts.
 2013-09-30 11:16:32 +02:00
Wim Taymans
4a31aec513 rtpjitterbuffer: improve debug 2013-09-30 11:15:25 +02:00
Hans Månsson
041946423a mp4mux: Do not require framerate in peer video caps 
Remove the framerate restriction on the caps.

Reference: https://bugzilla.gnome.org/show_bug.cgi?id=708864
 2013-09-28 13:02:11 +02:00
Wim Taymans
8c5ce0dbdc rtspsrc: also go into the loop function after connect 
When we have opened the stream, go into the loop function so that we can
receive messages from the server.
 2013-09-27 15:08:31 +02:00
Matej Knopp
40c0586c17 matroskademux: move the check for subtitle buffer being null terminated before validating UTF-8 
https://bugzilla.gnome.org/show_bug.cgi?id=707933
 2013-09-27 14:38:19 +02:00
Wim Taymans
d4b4b4e924 rtpjitterbuffer: don't calculate skew without rtptime 
Skip trying to calculate the skew when we don't have an rtptime.
It causes problems when lost packet events are placed in the jitterbuffer.
 2013-09-26 16:21:33 +02:00
Wim Taymans
6095e2e859 rtspsrc: disable checks when linking pads 
We know the pad links will work (and we don't check the return value
anyway).
 2013-09-25 17:42:02 +02:00
Wim Taymans
2efd58fc84 rtpbin: avoid some pad link checks 
Link pads without checks, we know it will work.
 2013-09-25 17:38:31 +02:00
Sebastian Dröge
4a91a93d4e qtmux: Don't error out if downstream is not seekable for non-fragmented variants 
Doing so would be a regression over 1.0 and breaks the unit test.
However the result will be most likely unusable, so let's post
a warning message on the bus.
 2013-09-25 13:25:34 +02:00
Wim Taymans
97f4674655 rtpjitterbuffer: calculate some stats 2013-09-25 10:50:05 +02:00
Wim Taymans
b1d29483bb rtpjitterbuffer: move send_lost_event function 
Move the send_lost_event function to the do_lost_event handling, there is no
need to have a separate function.
 2013-09-25 10:50:05 +02:00
Thiago Santos
dc02d91c14 qtdemux: add code to parse creation time earlier than 1970 
Use g_date_time seconds manipulation to allow to cover the quicktime
spec for creation_time. It uses seconds since 1904.

Both paths could be done using the generic approach of seconds since
1904 with GDateTime handling, but the first path using seconds from
1970 should be more commonly found and avoids a few objects creation and
ref/unref, so keep it there for performance.

Additionally, the code for handling seconds since 1970 changed from >
to >= because having 0 seconds since 1970 is also a valid case for that
path to handle.

https://bugzilla.gnome.org/show_bug.cgi?id=707975
 2013-09-24 15:16:54 -07:00
Matej Knopp
a1a493dae4 matroskademux: update stream->pos when sending buffers so that gap events are not sent unnecessarily 
https://bugzilla.gnome.org/show_bug.cgi?id=708505
 2013-09-24 15:12:44 -07:00
Wim Taymans
adf5d96044 rtpmanager: update docs 2013-09-23 16:34:15 +02:00
Wim Taymans
e5019de80d docs: update docs with 1.0 element names 2013-09-23 15:36:47 +02:00
Wim Taymans
8ce674da87 rtpjitterbuffer: always store lost event in jitterbuffer 
Always prepare a lost event in the jitterbuffer, it is to wake up and make the
pushing thread continue. We drop the event when we are not supposed to push lost
events downstream.
 2013-09-23 14:45:27 +02:00
Wim Taymans
9f3345fcc2 rtpjitterbuffer: schedule lost event differently 
Schedule the lost event by placing it inside the jitterbuffer with the seqnum
that was lost so that the pushing thread can interleave and push it properly.
 2013-09-23 14:45:27 +02:00
Wim Taymans
ae389aeb0c rtpjitterbuffer: remove list debug 2013-09-23 14:45:26 +02:00
Wim Taymans
28641e3145 rtpjitterbuffer: add type to the item 
So that the upper layer can know what data is contained in the item.
 2013-09-23 14:45:26 +02:00
Wim Taymans
479c7642fd rtpjitterbuffer: fix flush 
Pass function to flush to properly free the queue items.
 2013-09-23 14:45:25 +02:00
Wim Taymans
0cc887eb98 rtpjitterbuffer: append seqnum -1 packets 2013-09-23 14:45:25 +02:00
Wim Taymans
39a2ba669d rtpjitterbuffer: use structure to hold packet information 
Make the jitterbuffer operate on a structure containing all the packet
information. This avoids mapping the buffer multiple times just to get the RTP
information. It will also make it possible to store other miniobjects such as
events later.
 2013-09-23 14:45:25 +02:00
Wim Taymans
1760817005 rtpjitterbuffer: update expected timer when possible 
When we receive a packet and we have some missing packets, we can update their
estimated arrival times based on the timestamp difference.
 2013-09-23 14:45:25 +02:00
Wim Taymans
fdc1ed1680 rtpjitterbuffer: fix order of timeout events 
Improve the order of the timeout events, if there are timers with the same
timeout, we want to trigger the lowest seqnum first. For this we need to loop
over the complete array of timers to find the best one before triggering the
timeout.
 2013-09-23 14:45:25 +02:00
Wim Taymans
0b1a7edfea rtpjitterbuffer: send lost event before signaling next buffer 
First send the lost event, then update the next_seqnum counter and then
send the signal to the pushing thread that it can retry to push a buffer. This
avoids pushing out buffers before the lost event is pushed.
 2013-09-23 14:45:25 +02:00
Wim Taymans
5051f51f0a jitterbuffer: configure clock-rate on jitterbuffer 
Add a get and setter to configure the clock-rate in the jitterbuffer instead of
passing it as an argument to the insert method.
 2013-09-23 14:45:24 +02:00
Wim Taymans
3c421e7e48 rtpjitterbuffer: add option to reset retransmission timers 2013-09-23 14:45:24 +02:00
Wim Taymans
6f4deab298 rtpjitterbuffer: stop the timer thread 
The timeout code could release the lock so we need to check if we are allowed to
wait for the clock some more.
 2013-09-23 14:45:24 +02:00
Wim Taymans
cba4e6a707 rtpjitterbuffer: unlock only once 2013-09-23 14:45:24 +02:00
Wim Taymans
5dc207948c rtpjitterbuffer: improve flush and shutdown 
There is no need to unschedule the timer in flush-start, flush-stop will remove
the timers and unschedule.
Unschedule the current timer before attempting to join the timer thread.
 2013-09-23 14:45:23 +02:00
Wim Taymans
a512cc2d3c rtpjitterbuffer: set correct expected time 
When we already have a timer for a packet, skip it but don't forget to adjust
the dts to the expected dts of the next packet.
 2013-09-23 14:45:23 +02:00
Wim Taymans
517ea0f4d9 jitterbuffer: improve debug 2013-09-23 14:45:23 +02:00
Wim Taymans
c395bf62dd alpha: use POFFSET instead of OFFSET 
Use the more correct POFFSET macro to get the offset of a component in its
plane. The offset macro gives the offset of the component relative to the start
of the frame.
 2013-09-23 14:45:23 +02:00
Sebastian Dröge
94ad6724ba goom: Fix MMX assembly compilation with clang 
clang does not want or need a clobber list for emms:
error: clobbers must be last on the x87 stack

Patch taken from the FreeBSD ports, provided by
Dan McGregor <dan.mcgregor@usask.ca>
 2013-09-21 18:48:19 +02:00
Sebastian Dröge
d8841b4832 matroska-demux: Make sure that subtitle buffers are \0-terminated 
https://bugzilla.gnome.org/show_bug.cgi?id=707933
 2013-09-20 10:22:40 +02:00
Andoni Morales Alastruey
cfefdaebb6 qtmux: handle issues correctly when downstream is not seekable 
The streamable property only make sense for fragmented formats.
For regular MP4, when downstream is not seekable we can't rewrite
the headers, so qtmux can only work with fast-start=TRUE, where
the headers are written finishing the file.
For fragmented MP4, when streamable is not seekable and the streamable
property is FALSE, we must enforce streamable=TRUE warning the user
about this change

https://bugzilla.gnome.org/show_bug.cgi?id=707242
 2013-09-20 10:09:48 +02:00
Andoni Morales Alastruey
9ae5082204 qtmux: make "streamable" TRUE as default 
The most common use case for fragmented MP4 (Dash and Smooth Streaming)
is producing streamable content (even for VOD). streamable=FALSE would only
be used to generate fragmented MP4 with and index of MOOF's that could
be reproduced without a playlist/manifest
https://bugzilla.gnome.org/show_bug.cgi?id=707242
 2013-09-20 10:09:48 +02:00
Andoni Morales Alastruey
5732684e18 qtmux: deprecate the streamable property for non-fragmented MP4 
The streamable property only makes sense for fragmented MP4.
https://bugzilla.gnome.org/show_bug.cgi?id=707242
 2013-09-20 10:09:48 +02:00
Wim Taymans
926e2fa93b alpha: don't assume planar formats have just 1 block 
Don't assume planar formats have just one memory block with the data but use the
macros to access the right memory block where a component can be found.
 2013-09-19 16:50:44 +02:00
Wim Taymans
fd6c57cf10 rtpjitterbuffer: keep delay as a separate variable in timer 
Keep a separate delay in the timer so that we still know the original timestamp
of the packet that this timer refers to. We can then place the correct
running-time in the Retransmission event.
 2013-09-19 14:32:48 +02:00
Wim Taymans
d34184dd03 rtpjitterbuffer: fix writability of properties 2013-09-19 14:32:48 +02:00
Wim Taymans
6bb2626498 rtpjitterbuffer: reevaluate the current timer after timeout 
When we trigger the timeout logic of a timer, reevaluate it because it is
possible that it still has the lowest timeout.
 2013-09-18 16:33:40 +02:00
Wim Taymans
8d021b6ede rtpjitterbuffer: don't update time when unscheduled 
Don't try to estimate the current time when we got unscheduled.
 2013-09-18 16:31:26 +02:00
Wim Taymans
65606a25bf rtpjitterbuffer: init packet spacing on first buffer 
Already init the packet spacing variables on the first buffer so that we can
calculate the spacing on the second buffer already.
 2013-09-18 16:29:37 +02:00
Wim Taymans
f2efdf28f5 rtpjitterbuffer: push the lost event from the timer thread 
Instead of pushing the lost event from the chain function, schedule a timeout
that will push the lost event from the timer thread. This avoid blocking the
upstream thread while we push and sync the event.
 2013-09-18 14:57:09 +02:00
Wim Taymans
5d5fc03e04 rtpjitterbuffer: round gap duration to multiple of duration 
Make sure the gap duration in the lost event is a multiple of the packet
duration.
Enable another test.
 2013-09-18 14:12:47 +02:00
Wim Taymans
6e4a051d40 rtpjitterbuffer: keep track of duration 
Keep track of the estimated duration of missing packets and use it in the lost
event.
Enable another unit test
 2013-09-18 12:29:38 +02:00
Wim Taymans
ac3bb3acf6 rtpjitterbuffer: handle large gaps with one lost event 
When we have a large number of missing packets, generate one lost event for all
the packets that have no chance of being pushed out in time.
Fix and activate unit test for large gaps.
 2013-09-18 11:59:28 +02:00
Wim Taymans
26402e1c21 rtpjitterbuffer: refactor lost event sending 
Also make sure we only increment the expected seqnum and last
output timestamp.
 2013-09-18 11:57:06 +02:00
Wim Taymans
f49981a597 jitterbuffer: refactor timeout triggers 2013-09-17 23:29:56 +02:00
Wim Taymans
047021c443 jitterbuffer: simplify the timeout code 
Keep track of the current time in the timeout loop.
Loop over all timers and trigger all the expired ones, we can do this in the
same loop that selects the new best timer.
 2013-09-17 23:29:56 +02:00
Wim Taymans
fa1ef3328b jitterbuffer: rearrange timer update code 
Also update the timers when retransmission is disabled. We need to
do this because when we added LOST timers when we detected missing packets and
we need to remove those timers when the packet finally arrives.
 2013-09-17 23:29:56 +02:00
Tim-Philipp Müller
7a76595b22 videomixer: link to libm for maths stuff 
Fixes undefined references to rint and pow on ubuntu
build bot.
 2013-09-17 22:02:04 +01:00
Wim Taymans
232fdd8b56 jitterbuffer: release lock on shutdown 2013-09-17 15:19:42 +02:00
Matej Knopp
b2982bb749 qtmux: remove MAX_TOLERATED_LATENESS 
https://bugzilla.gnome.org/show_bug.cgi?id=707411
 2013-09-16 11:11:12 -03:00
Wim Taymans
4de919a17a jitterbuffer: use separate thread for timeouts 
Use a separate thread for scheduling the timeouts instead of using the
downstream streaming thread that might block at any time.
 2013-09-16 15:55:55 +02:00
Matej Knopp
b363832c2c qtmux: set first_ts to DTS for streams that have DTS 
https://bugzilla.gnome.org/show_bug.cgi?id=707340
 2013-09-16 12:14:00 +02:00
Matej Knopp
39f7e52266 qtmux: make sure duration is a valid number for last buffer 
https://bugzilla.gnome.org/show_bug.cgi?id=707340
 2013-09-16 12:14:00 +02:00
Matej Knopp
4e3c13c87c qtmux: use segment.start or last buffer end time in case of missing DTS 
https://bugzilla.gnome.org/show_bug.cgi?id=707340
 2013-09-16 12:14:00 +02:00
Matej Knopp
85728c04c4 Revert qtmux: Use buffer PTS if DTS is not set" 
This reverts commit f72c3cf71fde622067f41f31a53978ba4c94469d.

https://bugzilla.gnome.org/show_bug.cgi?id=707340
 2013-09-16 12:13:54 +02:00
Sebastian Dröge
d646a34681 videomixer: Update orc generated files 
https://bugzilla.gnome.org/show_bug.cgi?id=708131
 2013-09-16 11:03:06 +02:00
Olivier Crête
b9ceafe5af rtpsession: Demux RTCP buffers from the RTP stream 
If there are RTCP buffers in the RTP stream, process them as
RTCP. This way, we want receive streams following RFC 5761

https://bugzilla.gnome.org/show_bug.cgi?id=687657
 2013-09-13 16:25:49 +02:00
Jan Schmidt
299d3f5c42 rtp: Remove bogus extra caps from L24 template. 
The extra caps entry in the template was making it sometimes
get plugged for any dynamically allocated payload type.
 2013-09-13 23:27:49 +10:00
Wim Taymans
28e5f90988 rtpbin: use PacketInfo for the sender 
Avoid mapping the packet multiple times when sending RTP.
 2013-09-13 14:34:28 +02:00
Wim Taymans
a02c9473d8 rtpbin: store more in the PacketInfo 
Store all info in the PacketInfo so that we can avoid mapping the packet
multiple times.
 2013-09-13 14:34:28 +02:00
Wim Taymans
e5c789abd6 session: store more in the PacketInfo structure 2013-09-13 14:34:28 +02:00
Wim Taymans
47662f9ca4 rtpbin: RTPArrivalStats -> RTPPacketInfo 
Rename a structure because we are also going to use this for the sender
bits.
 2013-09-13 14:34:28 +02:00
Wim Taymans
c795b72988 source: small cleanups 2013-09-13 14:34:27 +02:00
Thiago Santos
566b0dce40 qtdemux: only update stop position if seek requests it 
Check for GST_SEEK_TYPE_NONE for stop poistion and only update
the stop time if it is requested. Otherwise just maintain whatever
was stored at the segment

https://bugzilla.gnome.org/show_bug.cgi?id=707530
 2013-09-13 09:21:12 -03:00
Rico Tzschichholz
8ed1ff6821 rtp: Add missing headers tp fix make dist 
In addition to a956a6ceb2
 2013-09-13 14:06:13 +02:00
Sebastian Dröge
b95ddd55cd flacparse: Make sure we have enough data to read image tags 
Thanks to iputinei for reporting this on IRC.
 2013-09-12 15:39:51 +02:00
Wim Taymans
9f9ba21404 jitterbuffer: handle segments with non-0 start 
We keep the DTS and PTS in running-time inside the jitterbuffer. Make sure to
transform it back to a buffer timestamp before pushing out the buffer.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=707931
 2013-09-12 15:04:30 +02:00
Seán de Búrca
9d3dbd6581 matroskademux: Fix off-by-one in validation of UTF-8 
https://bugzilla.gnome.org/show_bug.cgi?id=707933
 2013-09-12 09:19:15 +02:00
Thibault Saunier
9f4a8ccdf4 videomixer: Do not check if caps are empty when they are NULL 
In the case the caps are actually NULL, we should just concider it the
same way as empty caps in that case.
 2013-09-11 14:33:31 -03:00
Seán de Búrca
268058eb37 videomixer: fix build if orc is not installed 
https://bugzilla.gnome.org/show_bug.cgi?id=707886
 2013-09-11 00:17:44 +01:00
Thiago Santos
193ce9110e matroskademux: Preserve seqnum when pushing seek upstream 
After converting a seek from time to bytes, use the same seqnum
on the event that goes upstream
 2013-09-10 17:57:49 -03:00
Thiago Santos
be0eeae491 qtdemux: track streams that are EOS on push mode to finish earlier 
When the segment has a defined stop position, qtdemux should check
when streams reach this position and mark those as EOS. When all
streams are EOS it will return GST_FLOW_EOS to upstream to allow
the pipeline to finish instead of continuously consume buffers
from upstream that are not useful for the segment.

https://bugzilla.gnome.org/show_bug.cgi?id=707530
 2013-09-10 16:43:17 -03:00
Thiago Santos
33cf8b679d qtdemux: preserve stop of segment when doing seeks in push mode 
When handling seeks in push mode, qtdemux converts the seek to bytes
and pushes upstream. It needs to keep track of the seek and the
subsequent segment to be able to map them back to the requested
seek time and properly preserve the segment stop of the seek.

This is done by using the start offset in bytes of the seek,
that should be the same of the segment from upstream. And this
is also backwards compatible with what qtdemux already was using.

https://bugzilla.gnome.org/show_bug.cgi?id=707530
 2013-09-10 16:42:36 -03:00
Mathieu Duponchelle
8db40a8c7f videomixer: Add colorspace conversion 
https://bugzilla.gnome.org/show_bug.cgi?id=704950
 2013-09-10 10:37:23 +02:00
Mathieu Duponchelle
707e39fe7a videomixer: Don't send reconfigure event when formats or PAR are different 
It is racy with multiple pads.

https://bugzilla.gnome.org/show_bug.cgi?id=704950
 2013-09-10 10:36:48 +02:00
Mathieu Duponchelle
8db3648544 videomixer: Bundle private copies of videoconvert code 
Ideally, this would be part of libgstvideo.
Prefixes videoconvert symbols with videomixer_.

https://bugzilla.gnome.org/show_bug.cgi?id=704950
 2013-09-10 10:36:30 +02:00
Wim Taymans
9f9bcbc405 rtspsrc: only wait if we flushed 
Only wait for the STREAM_LOCK when we flushed something when sending
a command for PAUSED or PLAYING.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=707611
 2013-09-09 15:13:46 +02:00
Wim Taymans
7b2e002879 rtspsrc: return when a flush was issued 
Make gst_rtspsrc_loop_send_cmd() return TRUE when the current
action has been flushed
 2013-09-09 15:13:46 +02:00
David Holroyd
a956a6ceb2 rtp: add L24 pay and depayloader 
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=707734
 2013-09-09 15:13:46 +02:00
Matej Knopp
a5ceab82dd matroskademux: fix leaking buffer and caps 
https://bugzilla.gnome.org/show_bug.cgi?id=707688
 2013-09-07 15:50:36 +01:00
Tim-Philipp Müller
60e72b0254 udpsrc: fix build on win32 
gstudpsrc.c:855:15: error: #if with no expression
 2013-09-05 19:46:37 +01:00
Wim Taymans
5d2ff288b3 avidemux: handle unseekable streams 
Handle streams that we can't seek in and ignore them in the
seek logic.
 2013-09-04 15:53:05 +02:00
Wim Taymans
6f0e8a8b87 avidemux: only check video compression for video streams 
Or else we might deref a stream with a NULL strf.vids and segfault
 2013-09-04 15:53:05 +02:00
Alex Ashley
a965185dee qtdemux: Add support for the avc3 sample entry format of the AVC file format 
Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new
structure for fragmented MP4 called "avc3". The principal difference
between AVC1 and AVC3 is the location of the codec initialisation
data (e.g. SPS, PPS). In AVC1 this data is placed in the initial
MOOV box (moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data
goes in the first sample of every fragment (i.e. the first sample in
each mdat box).  The principal reason for avc3 is to make it easier
for client implementations, because it removes the requirement to
insert the SPS+PPS in to the decoder pipeline every time there is a
representation change.

This commit adds support for the "avc3" atom, which is almost identical
to the "avc1" atom, except it does not contain any SPS or PPS data.

https://bugzilla.gnome.org/show_bug.cgi?id=702004
 2013-09-04 13:33:22 +02:00
Mathieu Duponchelle
b68f419b6f videomixer: Don't set EOS to FALSE when the collectpad *is* EOS 
https://bugzilla.gnome.org/show_bug.cgi?id=707238
 2013-09-04 11:09:04 +02:00
Matej Knopp
349afc633a flacparse: cleanup on error after state change 
https://bugzilla.gnome.org/show_bug.cgi?id=707229
 2013-09-03 18:06:18 +02:00
Sebastian Dröge
7f59436979 udpsrc: Bind to multicast addresses on non-Windows systems 
On Windows it's not possible to bind to a multicast address
but the OS will make sure to filter out all packets that
arrive not for the multicast address the socket joined.

On Linux and others it is necessary to bind to a multicast
address to let the OS filter out all packets that are received
on the same port but for different addresses than the multicast
address

And deprecate the multicast-group property and replace it with the
address property.

https://bugzilla.gnome.org/show_bug.cgi?id=707042
 2013-09-03 11:23:24 +02:00
Matej Knopp
73751dbbe7 flacparse: Free GstBaseParseFrame if pushing a header failed 2013-09-03 10:10:49 +02:00
Sebastian Dröge
edf6d28765 udpsrc: Refactor address resolval into its own function 2013-09-03 10:10:49 +02:00
Tim-Philipp Müller
966f848edb replaygain: fix taglist leak in rganalysis 
And add some FIXMEs.
 2013-09-02 23:00:29 +01:00
Sebastian Dröge
1971c43279 flacparse: Properly propagate downstream flow returns upstream 
https://bugzilla.gnome.org/show_bug.cgi?id=707229
 2013-09-02 11:56:33 +02:00
Tim-Philipp Müller
1dfc1f2686 Don't use setlocale in plugins() 
Only apps should call setlocale(), not libraries.
 2013-09-01 21:18:38 +01:00
Wim Taymans
d851b8a8b4 rtpmpvpay: Fix RTP buffer allocation in rtpmpvpay 
RTP buffer allocation should not be done with padding for the specific MPEG2
header as the padding is done at the end of the buffer and the last byte is
the size of the padding.

https://bugzilla.gnome.org/show_bug.cgi?id=706970
 2013-08-29 13:15:15 +02:00
Bernhard Miller
f7528d274b autovideosink: add sync property 
https://bugzilla.gnome.org/show_bug.cgi?id=706955
 2013-08-29 12:23:24 +02:00
Bernhard Miller
2fa68fce07 autoaudiosink: introduce sync property 
https://bugzilla.gnome.org/show_bug.cgi?id=706955
 2013-08-29 12:23:23 +02:00
Thiago Santos
9549289a18 qtdemux: push buffers after segment stop until reaching a keyframe 
This should make decoders able to precisely push buffers until the stop
time in case they need the next keyframe to do it.

Also, according to gst_segment_clip, it should only push a buffer that
the starting ts is strictly smaller than the segment stop, so we change
the min < comparison for <=
 2013-08-28 12:58:56 -03:00
Sebastian Dröge
76293efd72 Release 1.1.4 2013-08-28 12:52:25 +02:00
Wim Taymans
2a8566ddec matroska-mux: remove framerate restriction 
Remove the framerate restriction on the caps.
 2013-08-27 15:25:16 +02:00
Wim Taymans
f1106cde66 session: only update next check time when reconsidering 
Don't update the next RTCP check time in all cases but only when we
reconsidered. This avoids delaying sending a full RTCP packet when we
are doing early feedback.
 2013-08-27 09:55:52 +02:00
Wim Taymans
47065db0b6 session: add more debug 2013-08-27 09:55:52 +02:00
Wim Taymans
454d75951e jitterbuffer: fix types of the retransmission event 2013-08-27 09:55:52 +02:00
Wim Taymans
dd4af0d11c jitterbuffer: only timeout EXPECTED timers on gap 
Only timeout the EXPECTED timers when we detect a large seqnum gap.
 2013-08-27 09:44:18 +02:00
Wim Taymans
4b7bcc2ec1 rtsession: fix locking 
We need to take the session lock when getting and manipulating the
source.
 2013-08-26 11:50:27 +02:00
Wim Taymans
3f46527f75 rtpsession: add some more debug 2013-08-26 11:50:13 +02:00
Mathieu Duponchelle
5d21f8f2e3 videomixer: don't send flush_stop twice. 
If we get flush start and a seek we need to only send flush_stop once.

More info at #706441
 2013-08-23 20:17:11 -04:00
Tim-Philipp Müller
9b0bcc01a0 multipartdemux: propagate discont 2013-08-23 15:57:46 +01:00
Tim-Philipp Müller
c3af414cbf multipartdemux: remove dynamic sourcpads when going from PAUSED to READY 2013-08-23 15:57:46 +01:00
Tim-Philipp Müller
7d78a68c8d multipartdemux: timestamp output buffers based on first input buffer that provided bytes not last 
https://bugzilla.gnome.org/show_bug.cgi?id=637754
 2013-08-23 15:57:46 +01:00
Wim Taymans
54e7e7547a rtxqueue: add property to configure queue size 2013-08-23 15:47:25 +02:00
Wim Taymans
84833bed11 rtpbin: proxy jitterbuffer do-retransmission property 2013-08-23 12:10:19 +02:00
Michael Olbrich
23d4044e2c avimux: unmap the correct buffer 
The audio buffer was mapped so unmap it and not the video buffer

https://bugzilla.gnome.org/show_bug.cgi?id=706642
 2013-08-23 11:32:52 +02:00
Wim Taymans
89b9019e3e rtx: various improvements 
Use locking
Don't push from the event handler, collected packets in a queue and push from
the chain function.
Clear queues on shutdown.
 2013-08-21 17:02:27 +02:00
Wim Taymans
ee15bc9284 session: generate events correctly 
Do correct shifting of the bitmask for lost packets.
 2013-08-21 17:02:27 +02:00
Wim Taymans
67523d3ecb rtp: register rtx element better 2013-08-21 17:02:26 +02:00
Wim Taymans
f626e29897 jpegdepay: add some more debug 2013-08-21 12:56:35 +02:00
Wim Taymans
77ed44a88a rtpgstdepay: only push events when they changed 
Keep track of the STREAM_START and TAG events and only push them
when they changed.
 2013-08-21 12:10:00 +02:00
Wim Taymans
b144809b7c rtpgstpay: taglists should not be merged in 1.0 2013-08-21 10:52:59 +02:00
Wim Taymans
69b0dcd7df rtpgstdepay: flush on FLUSH_STOP event 2013-08-21 10:28:50 +02:00
Wim Taymans
5ff9093843 rtpgstpay: reset on state change 
Do full reset on state change to READY
 2013-08-21 10:03:52 +02:00
Wim Taymans
ae9239aac7 rtpgstpay: reset on FLUSH_STOP 
Clear the adapter and pending buffer list on FLUSH_STOP.
 2013-08-21 09:55:20 +02:00
Wim Taymans
2e8955df39 rtpgstpay: don't use clock for config interval 
We can't use the clock to time our config-interval because we are not
live (or there might not be a clock or the clock might not be running).
Instead just simply take the timestamp diff.
 2013-08-21 09:39:30 +02:00
Wim Taymans
182f96ff79 rtpgstay: don't use // comments 2013-08-21 09:33:04 +02:00
Youness Alaoui
e22f7e91c4 rtspsrc: Fix response argument in handle-request signal 2013-08-21 09:06:02 +02:00
Youness Alaoui
6636efd31a rtspsrc: Add sdes property and proxy it to rtpbin 2013-08-21 09:06:02 +02:00
Youness Alaoui
62a6f58697 Send a stream-start whenever we send tags 
This is to make sure tags are cleared on the client if the
stream-start was previously lost, otherwise, the client may end
up with a merged taglist of multiple songs
 2013-08-21 09:06:01 +02:00
Youness Alaoui
05bcfee5a3 rtpgstpay: Add a config-interval property to resend the caps/tags at a regular interval 
This is useful in case the packet containing the inlined caps was lost
or if new client joins an already running RTP stream and they missed
the previous tag events.
This also makes the payloader keep a list of merged tags so the retransmitted
tag event contains all previously received. A STREAM_START event will
flush the list of tags.
 2013-08-21 09:06:01 +02:00
Youness Alaoui
1f4ca28868 rtpgstpay: Refactor the setcaps and use new method to send arbitrary caps at any time 2013-08-21 09:06:01 +02:00
Youness Alaoui
9257409613 rtpgstpay: Do not flush events for stream-start and avoid conflict between event and pending inline caps 2013-08-21 09:06:01 +02:00
Youness Alaoui
2d53289b6b rtpgstpay: Add a create_from_adapter API and use a list of GstBufferList 
This is necessary to fix event/caps sending. If we send a STREAM_START
packet, it will cause an error because the stream didn't receive its
caps and new-segment events, so we must wait for the first buffer before
sending the stream-start event buffer. However, the caps will be sent
at the same time and so the 'inline caps' will be set for the event.
We need to be able to payload individual packets (data, caps or events)
and only send them when we call flush.
 2013-08-21 09:06:01 +02:00
Youness Alaoui
0070ba76f2 rtpgstpay: Add etype=4 for payloading GST_EVENT_STREAM_START 2013-08-21 09:06:01 +02:00
Youness Alaoui
6155b27971 rtpgstpay: Fix typo, GST_EVENT_CUSTOM_BOTH has etype of 3 2013-08-21 09:06:01 +02:00
Wim Taymans
587dc055e9 jitterbuffer: handle EOS 
When the queue is empty, and we received EOS, pause and push an EOS
event downstream.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=706387
 2013-08-20 14:36:59 +02:00
Wim Taymans
533f26fc99 jitterbuffer: update docs 2013-08-20 10:26:15 +02:00
Wim Taymans
c7f9ef8012 jitterbuffer: update all timers 
Keep looping over all registered timers so that we can mark them lost instead of
stopping as soon as we find the timer for the current seqnum.
 2013-08-20 10:25:17 +02:00
Wim Taymans
5debda9ca1 jitterbuffer: remove unused variables 2013-08-20 08:55:50 +02:00
Wim Taymans
a88db5fa2c jitterbuffer: reorganize timer handling 
Restructure handling of incomming packet and the gap with the expected seqnum
and register all timers from the _chain function.
Convert a timer to a LOST packet timer when the max amount of retransmission
requests has been reached.
 2013-08-19 22:04:51 +02:00
Wim Taymans
d9d6eac4bb jitterbuffer: refactor packet spacing calculation 2013-08-19 22:04:50 +02:00
Wim Taymans
c4dc159656 jitterbuffer: keep track of last seqnum and dts 2013-08-19 22:04:50 +02:00
Wim Taymans
652ce95ca6 jitterbuffer: small cleanups 2013-08-19 22:04:50 +02:00
Wim Taymans
b4a35bbe82 jitterbuffer: reset retransmission timers in add/reschedule 
Reset the retransmission timers when adding and rescheduling a timer.
 2013-08-19 22:04:50 +02:00
Wim Taymans
cf8a0652f3 jitterbuffer: rename variables for packet spacing 2013-08-19 22:04:50 +02:00
Wim Taymans
ec82e4ab7c jitterbuffer: remove lost timer when we get the packet 
When we receive a packet, also remove the LOST timer for it.
 2013-08-19 22:04:50 +02:00
Wim Taymans
2f03b43b21 jitterbuffer: expected seqnum must increase 
Only update the expected seqnum when it is bigger than the previous expected
seqnum.
 2013-08-19 22:04:50 +02:00
Wim Taymans
c5bf376bb5 jitterbuffer: add more debug 2013-08-19 22:04:50 +02:00
Wim Taymans
ff825a2919 rtxqueue: add retransmission queue element 2013-08-19 22:04:50 +02:00
Wim Taymans
5fe18ee432 session: add some docs 2013-08-19 22:04:49 +02:00
Wim Taymans
482dacfb54 session: handle NACK feedback and generate events 
Handle and parse the feedback NACK packets and generate a Retransmission
event for each NACKed packet
 2013-08-19 22:04:49 +02:00
Thibault Saunier
e47ffb203b videomixer: Do not send flush_stop ourself after a flush_start 
When we receive a flush_start, we should wait for the next flush_stop
and foward it, not create a flush_stop ourself.
 2013-08-17 11:40:27 +02:00
Wim Taymans
db90f6e68d h264depay: init debug category early 
Init the debug variable when we register the element because it is also used by
the payloader element when it calls the add_sps_pps method.
 2013-08-16 17:12:19 +02:00
Chris Bass
3e9dea3f8c qtdemux: check denominator isn't zero before scaling duration. 
When gst_qtdemux_configure_stream sets fps_d, check that n_samples is
non-zero before using it as a denominator to scale the stream duration.

https://bugzilla.gnome.org/show_bug.cgi?id=706076
 2013-08-16 10:14:30 +02:00
Wim Taymans
f11c2c9b3b jitterbuffer: forward flush before stopping dataflow 
First forward the flush event and then stop our loop function.
 2013-08-14 16:19:32 +02:00
Olivier Crête
4c6e636720 rtph264pay: Use the SPS/PPS handling function from the depayloader 
Remove duplicated copies

https://bugzilla.gnome.org/show_bug.cgi?id=705553
 2013-08-13 10:38:23 -04:00
Olivier Crête
742b90747d rtph264depay: Make the SPS/PPS deduplication function generic 
Make it not touch any internals of the depayloader

https://bugzilla.gnome.org/show_bug.cgi?id=705553
 2013-08-13 10:38:23 -04:00
Chris Bass
b40bf67526 aacparse: allow conversion from raw AAC to ADTS 
This patch will prepend ADTS headers to raw AAC audio frames, allowing
upstream elements to link to decoders that only support AAC in ADTS format.

Note that no error correction bits are added to ADTS frames in this code.

https://bugzilla.gnome.org/show_bug.cgi?id=615740
 2013-08-13 15:58:23 +02:00
Sebastian Dröge
282afae244 rtspsrc: Only free GCheckSum after its last usage 
https://bugzilla.gnome.org/show_bug.cgi?id=705760
 2013-08-13 12:44:11 +02:00
Matej Knopp
2269ac8f28 qtdemux: elst should offset samples instead of buffers 
The current approach where buffers are offset is not ideal, as during seek
and loop current time is compared to sample times.

https://bugzilla.gnome.org/show_bug.cgi?id=700264
 2013-08-12 13:48:04 +02:00
Thibault Saunier
6c349d6ec3 videomixer: Send EOS if buf_end >= segment.stop 
That means the whole segment is already played, and we are sure we
are EOS at that point.

Also handle segment seeks, and do not send EOS in that case.
 2013-08-11 19:05:18 +02:00
Matej Knopp
96afba915a avidemux: send proper stream_start event 
https://bugzilla.gnome.org//show_bug.cgi?id=705449
 2013-08-08 11:57:32 +02:00
Sebastian Dröge
9863e08839 matroskademux: Don't print warnings during flushing and stop as soon as possible 
https://bugzilla.gnome.org//show_bug.cgi?id=705442
 2013-08-08 11:53:15 +02:00
Tim-Philipp Müller
957c8e3e61 rtpvp8depay: mark key frames and delta frames properly 
https://bugzilla.gnome.org/show_bug.cgi?id=705550
 2013-08-07 11:14:38 +01:00
Wim Taymans
48174164eb session: add NACK feedback in RTCP 2013-08-06 15:50:19 +02:00
Wim Taymans
4379ed1dee source: add methods to register NACK 
Add a method to register a missing packet for an ssrc along with
methods to get the missing packets and clear them.
 2013-08-06 15:50:19 +02:00
Wim Taymans
50638b8106 session: handle Retransmission event and schedule NACK 
Handle the retransmission event from downstream and use it to schedule a NACK
request.
 2013-08-06 15:50:19 +02:00
Wim Taymans
0bddbd682d session: pass data to remove func 
Pass the data to the remove function because we are going to deref it when there
is pli or fir.
 2013-08-06 15:50:19 +02:00
Thibault Saunier
38946bd9f4 qtdemux: Fix compilation 2013-08-06 15:31:38 +02:00
Thibault Saunier
593a31f2b4 qtdemux: Raw buffer DTS should always be CLOCK_TIME_NONE 2013-08-06 15:17:44 +02:00
Thibault Saunier
c5fa4666b7 videomixer: Make sure to send EOS if the buffer end time equals the segment end time 
Otherwize EOS never gets sent in that particular case.
 2013-08-06 12:21:33 +02:00
Sjoerd Simons
d14d4c436c goom: Ensure src caps are writable 
In some cases the src caps determined by goom weren't writable, causing
a bunch of assertion failures and failed caps. Fixed by always
explicitely making the caps writable

https://bugzilla.gnome.org/show_bug.cgi?id=705475
 2013-08-05 15:33:39 +02:00
Wim Taymans
3c82de59f9 session: use common send_rtcp method 
Reuse the send_rtcp method that already asks for the current time when
requesting a keyframe.
 2013-08-05 15:02:59 +02:00
Wim Taymans
3c14c6021c session: Don't use ClockTimeDiff for unsigned delays 2013-08-05 15:02:59 +02:00
Edward Hervey
4f4f6432cc qtmux: Use buffer PTS if DTS is not set 
Avoids ending up with completely bogus scaled duration/pts when new
buffers have invalid DTS.
 2013-08-04 17:15:38 +02:00
Tim-Philipp Müller
7272dec5fe rtpdec: use generic marshaller 2013-08-04 11:20:41 +01:00
Tim-Philipp Müller
fe098e3aff udp: remove unused marshal and enumtypes files 2013-08-04 11:03:07 +01:00
Tim-Philipp Müller
7469cd3a4c rtpmanager: use generic marshaller 2013-08-04 11:03:07 +01:00
Wim Taymans
7584f91f31 jitterbuffer: send event in right direction 2013-08-04 00:24:36 +02:00
Wim Taymans
9613e481ad session: add FIR and PLI like other RTCP packets 
Add the FIR and PLI packets like the other RTCP packet instead of from the
on-sending-rtcp default signal handler.
 2013-08-03 00:33:24 +02:00
Wim Taymans
743e1b1191 jitterbuffer: fix property ranges 2013-08-02 17:22:55 +02:00
Wim Taymans
cd0164f4cc jitterbuffer: push retransmission events 2013-08-02 16:43:59 +02:00
Wim Taymans
9a13267e85 jitterbuffer: add support for retransmission retry 
When we didn't receive a packet after requesting retransmission, retry
asking for retransmission for a certain period.
 2013-08-02 14:54:56 +02:00
Wim Taymans
e9ad5126db jitterbuffer: add properties 
Add properties to control retransmission parameters
 2013-08-02 14:47:56 +02:00
Wim Taymans
a8c7ff7489 jitterbuffer: use corrected timeout when rescheduling 
When we recalculate the timeout, use the corrected timeout value depending on
the timer type.
 2013-08-02 12:44:58 +02:00
Wim Taymans
9c7e3e3455 jitterbuffer: update timers after queueing 
Else we might update the timer needlessly for duplicates.
 2013-08-02 12:43:00 +02:00
Wim Taymans
ebd6b8f8ab jitterbuffer: move method up 2013-08-02 12:42:08 +02:00
Wim Taymans
f6b6797874 jitterbuffer: small cleanup 2013-08-02 06:28:32 +02:00
Wim Taymans
0e41414926 jitterbuffer: unschedule old expected packets 
When we receive a new packet, unschedule old outstanding packets when their
seqnum is too far away.
 2013-08-01 23:36:07 +02:00
Wim Taymans
70695466ed jitterbuffer: refactor timer update 2013-08-01 23:32:00 +02:00
Wim Taymans
4ab3f5d3da jitterbuffer: update timers when removing 
Update the timers when we remove a timer.
Handle canceled timers, make them unschedule the current timer and
trigger the timeout code.
 2013-08-01 23:24:29 +02:00
Wim Taymans
b983cf675b jitterbuffer: fix typo 2013-08-01 23:22:02 +02:00
Wim Taymans
f3c658cbe6 jitterbuffer: improve timeout management 
If we change the seqnum of an existing timer and we were waiting for
that timer, unschedule it. If we change the timeout of an existing timer and we
were waiting on it, only unschedule when the new time is smaller.
 2013-08-01 15:40:52 +02:00
Wim Taymans
77e5d320ab jitterbuffer: install timer for expected arrival 
Install a timer that is triggered when the expected arrival time of a packet
expired.
 2013-08-01 15:11:13 +02:00
Wim Taymans
f08d98404e jitterbuffer: improve unschedule of timers 
Conflicts:
	gst/rtpmanager/gstrtpjitterbuffer.c
 2013-08-01 14:57:11 +02:00
Wim Taymans
9d3b824e2a jitterbuffer: move code around 2013-08-01 12:21:53 +02:00
Wim Taymans
fe32e80c92 jitterbuffer: estimate inter packet spacing 
When we see two packets with consecutive seqnums and a different RTP time, use
the DTS difference as the inter packet spacing estimate.
 2013-08-01 12:07:11 +02:00
Wim Taymans
255b7106f5 jitterbuffer: keep track of current timeout 2013-08-01 12:01:15 +02:00
Wim Taymans
7e43dba19b jitterbuffer: cleanup timer handling 2013-08-01 11:49:10 +02:00
Wim Taymans
9d88ac9cbb jitterbuffer: reset is only possible with a GAP 2013-08-01 11:40:41 +02:00
Wim Taymans
f864131227 jitterbuffer: operate on DTS 
Make the jitterbuffer schedule the timeouts based on the DTS instead
of the PTS. This makes it all smoother with reordered frames and gives
the decoder time to reorder the frames in time.
 2013-08-01 11:36:56 +02:00
Wim Taymans
80c5934290 jitterbuffer: rename timout variable 2013-08-01 11:14:12 +02:00
Wim Taymans
aa951433ee jitterbuffer: small cleanup 2013-07-31 17:08:58 +02:00
Wim Taymans
69c78f72d5 jitterbuffer: block output in paused or buffering 2013-07-31 16:59:58 +02:00
Wim Taymans
4fbbc53a49 jitterbuffer: store pts in timer 
Only store the pts in the timer so that we can both do timeouts with timings on
the input and output of the jitterbuffer.
 2013-07-31 16:59:09 +02:00
Wim Taymans
77846d35c6 rtpjitterbuffer: refactor jitterbuffer 
Refactor the jitterbuffer code. Make separate function for peeking a buffer,
pushing the next buffer, waiting for timeouts and handling the timeouts.

The main loop now tries to push as many buffers as it can until it runs out of
buffers or when it detects a seqnum discont. Then it will wait for some event to
happen before attempting to push more buffers.

Make methods to register timeouts in an array. These timeouts are registered
when we detect a missing packet, sync for the first packet or when we find an
estimation for the end-of-stream.

This greatly simplifies and clarifies the code and also makes it possible to
register more complicated timeout schemes later.
 2013-07-30 23:24:23 +02:00
Wim Taymans
ea931d4f57 rtpjitterbuffer: use NULL to ignore percent 
If we pass NULL to pop and push we ignore the percent result.
 2013-07-30 23:24:23 +02:00
Wim Taymans
b3e8a85a54 jitterbuffer: refactor 
Move eos estimation into separate function
 2013-07-30 23:24:22 +02:00
Tim-Philipp Müller
a5532b4510 flvdemux: don't leak stream_id string 
https://bugzilla.gnome.org/show_bug.cgi?id=705142
 2013-07-30 14:28:19 +01:00
Sebastian Dröge
2e35b36aab gst: Don't swap start/stop for negative rates in the SEGMENT query 2013-07-29 12:12:41 +02:00
Matej Knopp
47ed79fb1c qtdemux: Check for data size when parsing h264 codec data from strf atom 2013-07-29 11:53:07 +02:00
Sebastian Dröge
722ef42196 matroskademux: Implement SEGMENT query 2013-07-29 10:53:54 +02:00
Sebastian Dröge
d135373beb flvdemux: Implement SEGMENT query 2013-07-29 10:53:47 +02:00
Sebastian Dröge
4e78974c87 avidemux: Implement SEGMENT query 2013-07-29 10:50:59 +02:00
Matej Knopp
2dcdfe07f7 qtdemux: Support H264 fourcc 
https://bugzilla.gnome.org/show_bug.cgi?id=704996
 2013-07-29 09:11:39 +02:00
Sebastian Dröge
1fbb6d30a6 avidemux: Fix duration reporting in push mode 
https://bugzilla.gnome.org/show_bug.cgi?id=700933
 2013-07-28 17:38:56 +02:00
Sebastian Dröge
89a3dc2ecd avidemux: Don't forget unmapping and unreffing buffer 2013-07-28 17:32:59 +02:00
Matej Knopp
1947587784 avidemux: unmap buffer 
https://bugzilla.gnome.org/show_bug.cgi?id=704951
 2013-07-28 17:32:59 +02:00
Wim Taymans
02359f9219 session: don't make buffer writable prematurely 
There is no reason to make the SR buffer writable at this point. This is better
delayed until needed.
 2013-07-26 22:31:41 +02:00
Wim Taymans
0261199fc4 session: ignore RTCP for inactive sources 2013-07-26 22:31:23 +02:00
Wim Taymans
a4b4ca53c0 session: small cleanup 2013-07-26 22:25:17 +02:00
Wim Taymans
e0abd2e9b5 session: handle partial RTCP report blocks 
When we have more SSRCs to report than what fit in an RTCP packet, use a
generation counter to make sure all of them end up in a packet eventually.
 2013-07-26 17:29:10 +02:00
Wim Taymans
6cce6fb04c session: create SSRC before doing session cleanup 
Make the internal source before we do session cleanup
 2013-07-26 17:29:10 +02:00
Wim Taymans
5b0298c63e session: reorganize the report block code 2013-07-26 17:29:10 +02:00
Matej Knopp
7335b81c47 matroskademux: fix memory leak in check_subtitle_buffer 
https://bugzilla.gnome.org/show_bug.cgi?id=704921
 2013-07-26 17:11:31 +02:00
Wim Taymans
3c44cd7c83 session: refactor active and sender checks 2013-07-26 14:21:40 +02:00
Wim Taymans
e952f7ba43 session: remove internal sources on timeout 
When an internal source times out and becomes a receiver, remove it.
 2013-07-26 12:18:01 +02:00
Wim Taymans
e9e2fe3950 session: create an internal source for RTCP 
When we need to do RTCP and we don't have an internal source yet,
make one.
 2013-07-26 12:18:01 +02:00
Wim Taymans
bd0709c15c session: remove old code to change SSRC 
Remove code used to change the SSRC after a collision. We now send
a RECONFIGURE event upstream to make the upstream element change the SSRC.
 2013-07-26 12:18:01 +02:00
Wim Taymans
88f5a5f355 source: don't update packet SSRC 
Remove the code to update the SSRC in packets, it can never be called now that
we always use a source with matching packet SSRC.
 2013-07-26 12:18:01 +02:00
Wim Taymans
abc90da1dc session: delay allocation of internal source 
Allocate the internal source when we receive a caps with the SSRC or when we see
a buffer with the SSRC.
 2013-07-26 12:18:01 +02:00
Wim Taymans
e0a1ce1291 session: generate reconfigure on collision 
When we detect a collision, change the SSRC that we suggest upstream
and trigger RECONFIGURE. This should make upstream select a new SSRC.
 2013-07-26 12:18:01 +02:00
Wim Taymans
495d43c089 session: produce RTCP for all internal sources 
Loop over all the internal sources and produce RTCP. We also need
to queue the RTCP packets and send them when we are finished.
 2013-07-26 12:18:00 +02:00
Wim Taymans
9505fd4150 session: deprecate internal source and ssrc properties 
Deprecate the internal source and internal ssrc properties. There might
be more than one internal source.
 2013-07-26 12:17:59 +02:00
Wim Taymans
3d6ee1fb5e session: internal sources don't use probation 2013-07-26 12:17:59 +02:00
Wim Taymans
0e53e9109e session: give caps to session 
Let the session parse the caps and update its SSRC when needed.
 2013-07-26 12:17:59 +02:00
Wim Taymans
c06482a2cb session: make method to suggest available SSRC 
Make a method to suggest the best available SSRC. This is the SSRC of the last
created internal source and is used to instruct upstream to produce this
SSRC.
 2013-07-26 12:17:59 +02:00
Wim Taymans
33ce50e8b1 session: keep SDES and set on new internal sources 
Keep track of the SDES ourselves and set it on all newly created
internal sources.
 2013-07-26 12:17:59 +02:00
Wim Taymans
5652f02b76 session: make method to make internal sources 
Add a method to obtain an internal source and use it to create
our internal source
 2013-07-26 12:17:59 +02:00