This also copies the caps. Otherwise we could end up pusing
the first buffer without any caps, which causes downstream
to not get notified about the caps.
Fixes bug #664892.
Support for TAG_IMAGE and TAG_ATTACHMENT is commented out; this requires caps
on buffers which is gone from 0.11.
Segment handling in the demuxer is a bit complex; I added some FIXME comments
in places where I'm not yet sure if I ported correctly.
Since matroskademux will attempt to push unaligned buffers,
downstream might have trouble with those, especially if downstream
uses ORC, such as audioconvert.
Ensure we push buffers aligned to the basic type at least for
those raw buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=659798
matroskademux performs segment tricks to skip gaps in streams,
notably at start for non 0 based files. There may however be
cases when full presentation (including intermediate gaps) is
desired, so a property allows to configure as of which gap
to act (or not at all).
API: GstMatroskaDemux::max-gap-time
Fixes#659009.
In particular, do so even if failing to read while prerolling,
such as when reading from a partial file (eg, while it is being
downloaded).
This fixes a wedge in playbin2.
https://bugzilla.gnome.org/show_bug.cgi?id=651965
Current matroska demux calculates the pixel aspect ratio only if both
DisplayHeight and DisplayWidth are set, but it is legal to use only
one variable if the other is equal to PixelWidth or PixelHeight, at
least the mkclean utility is doing that. So this makse mkcleaned
files play correctly.
https://bugzilla.gnome.org/show_bug.cgi?id=654744
Some video frames, for example alt-ref frame in VP8, will be
never displayed. This is why it has duration=0.
This patch allow to use this duration.
Bug: 654175
Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net>
Move the following function to matroska-read-common.[ch] from
matroska-demux.c and matroska-parse.c:
- gst_matroska_{demux,parse}_parse_attachments
https://bugzilla.gnome.org/show_bug.cgi?id=650877
Move the following function to matroska-read-common.[ch] from
matroska-demux.c and matroska-parse.c:
- gst_matroska_{demux,parse}_parse_attached_file
https://bugzilla.gnome.org/show_bug.cgi?id=650877
Move the following function to matroska-read-common.[ch] from
matroska-demux.c and matroska-parse.c:
- gst_matroska_{demux,parse}_parse_metadata_id_tag
https://bugzilla.gnome.org/show_bug.cgi?id=650877
Move the following function to matroska-read-common.[ch] from
matroska-demux.c and matroska-parse.c:
- gst_matroska_{demux,parse}_parse_metadata_id_simple_tag
https://bugzilla.gnome.org/show_bug.cgi?id=650877
Move the following functions to matroska-read-common.[ch] from
matroska-demux.c and matroska-parse.c:
- gst_matroska_{demux,parse}_get_seek_track
- gst_matroska_{demux,parse}_reset_streams
https://bugzilla.gnome.org/show_bug.cgi?id=650877
Move the following functions to matroska-read-common.[ch] from
matroska-demux.c and matroska-parse.c:
- gst_matroska_index_seek_find
- gst_matroska{demux,parse}_do_index_seek
https://bugzilla.gnome.org/show_bug.cgi?id=650877
Move the following function to matroska-read-common.[ch] from
matroska-demux.c and matroska-parse.c:
- gst_matroska_{demux,parse}_tracknumber_unique
https://bugzilla.gnome.org/show_bug.cgi?id=650877
Move the following functions to matroska-read-common.[ch] from
matroska-demux.c and matroska-parse.c:
- gst_matroska_{demux,parse}_encoding_cmp
- gst_matroska_{demux,parse}_read_track_encodings
https://bugzilla.gnome.org/show_bug.cgi?id=650877
Move the following functions to matroska-read-common.[ch] from
matroska-demux.c and matroska-parse.c:
- gst_matroska_{demux,parse}_peek_id_length_pull
- gst_matroska_{demux,parse}_peek_id_length_push
https://bugzilla.gnome.org/show_bug.cgi?id=650877
Move the following functions to matroska-read-common.[ch] from
matroska-demux.c and matroska-parse.c:
- gst_matroska_{demux,parse}_encoding_order_unique
- gst_matroska_{demux,parse}_read_track_encoding
https://bugzilla.gnome.org/show_bug.cgi?id=650877
Move the following functions to matroska-read-common.[ch] from
matroska-demux.c and matroska-parse.c:
- gst_matroska_decode_content_encodings
- gst_matroska_decompress_data
https://bugzilla.gnome.org/show_bug.cgi?id=650877
Replace the following functions with their gst_matroska_read_common_*
counterparts:
- gst_matroska_{demux,parse}_parse_index
- gst_matroska_{demux,parse}_parse_skip
- gst_matroska_{demux,parse}_stream_from_num
Introduce GstMatroskaReadCommon to contain those members of
GstMatroskaDemux and GstMatroskaParse that were used by the above
functions.
https://bugzilla.gnome.org/show_bug.cgi?id=650877
Since the segment duration is given in terms of the
GST_MATROSKA_ID_TIMECODESCALE we should only convert it into
nanoseconds when we are sure that any scale specified in the file has
been read.
https://bugzilla.gnome.org/show_bug.cgi?id=650258
AUTHOR only existed in an old version of the spec and ARTIST is
the new replacement for this. We are still reading both to still
be compatible with old files.
Fixes bug #644875.
It was an arbitrary limit from the start, meant as a basic sanity check,
so may just as well increase it a little. Would be good to provide
progress reporting while completing the block in any case..
https://bugzilla.gnome.org/show_bug.cgi?id=637060
Using this in a demuxer will cause deadlocks if there's
a pad with a pending pad-block downstream, no matter if
there is a queue between the pad or not. Queues pass
bufferalloc downstream from the same thread and only
act as a thread boundary for events and buffers.
Extra info can't hurt. Field names aren't necessarily consistent with
what's used elsewhere though (e.g. avidemux), but then neither are the
caps.
https://bugzilla.gnome.org/show_bug.cgi?id=623178
That is, if parse error occurs in state requiring to move to next cluster,
and doing so to the expected next position of cluster fails, then scan for a
next cluster from present position and resume from there.
Fixes#620790.
If some bits out of place in block(group) parsing, forego and move to next.
Also skip large blocks in pull mode, but need to give up in push mode.
Fixes#626463.
Improves #620790.
That is, in files that have no index (Cue), perform seek by scanning for
nearest cluster with timecode before requested position. Scanning is done
as a combination of interpolation and sequential scan.
Fixes#617368.
This allows us to skip delta units earlier and is a bit clearer in my
opinion. It also makes only video buffers ever be delta units, not
just for SimpleBlock as before.
When the keyframe bit of SimpleBlock Flags wasn't set, the buffer was being
marked with GST_BUFFER_FLAG_DELTA_UNIT, causing all buffers to be skipped
after a seek. This may be a problem with the Sorenson Squish encoder, but
arguably the keyframe bit should only be applied to video.
Fixes bug #620358.
In demuxer and muxer use the gst_util_uint64 scaling functions rather than
standard integer division. Add warnings (to be changed to debug) for debugging
the timestamp and duration.
Before, vp8dec had no option but to decode all frames even if some/all
of them would be late. With this change, performance when keyframes are
frequent is helped a great deal. On my Thinkpad X60s, decoding a 20 s
1080p sunflower encode with keyframes every 10 frames went from taking
42 s with 5 frames shown to 21 s with 15 frames shown (still slow
enough to count by hand). When keyframes are more sparse, you will
still be able to catch up eventually, but the results won't be as
noticable.
The original plan was to let WebM v1 be the same as Matroska v2 (with
extra constraints), but for simplicity it was decided to handle the
versions equally, such that e.g. SimpleBlock is only allowed in WebM v2.
Failure to do this for corrupt input can cause a subbuffer bigger
than the actual buffer to be created, quickly leading to segfault.
Test case:
bug_s222005751_r0.001____memcpy.webm
The comment says this cannot happen, but it did and I don't know
why. This is not the correct fix, needs investigation. Test case:
bug_s555010094_r0.0005:0.008____IA__g_assertion_message_expr.webm
Because GstMatroskaTrackContext *stream is set up in the first
SimpleBlock or Block, a rogue CodecState otherwise causes a segfault on
derefencing the NULL pointer. Test case:
bug_s5506167_r0.001____gst_matroska_demux_parse_blockgroup_or_simpleblock.webm
Changing it to the newest timestamp that was ever pushed will
increase the segment start in 500ms jumps, which could be just
after the next sparse stream buffer. E.g.
Video at 1.0s, sparse stream at 0.5s would jump the
sparse stream to 1.0s. Now a new sparse stream buffer could
appear that has a timestamp of 0.9s and this would be
dropped for no good reason because of bad luck.
As a side effect, avoid sending newsegment updates with start times
that go back and forth, which leads to bogus downstream running_time.
Also fixes seeking in bug #606744.
.. by initializing streams starting at 0, as that is basically
where we 'seek to' at the start and assume streams to start elsewhere.
Also enables newsegment update events for subtitle streams.
Matroska uses three-letter ISO 639-2B codes, but GST_TAG_LANGUAGE is
supposed to contain two-letter ISO 639-1 codes, so use new language
code mapping functions in -base to convert between those two as
needed.
Fixes#505823.
