Move the pixel-aspect-ratio calculations higher up in caps
determination, so the results are available for a call to
gst_video_multiview_guess_half_aspect() when stereoscopic video
is detected.
Wait until at least one keyframe has been parsed before
deciding to switch to passthrough mode, in case the
stream contains SEI messages that supplement the output
caps - for example by providing stereoscopic information
Like SPS/PPS they do contain information which will be needed to
decode the following data (as per definition of the flag)
Also ensures that the series of SPS/PPS/SEI NALU before a keyframe
can be considered as one contiguous header
Don't use the apis in codec-utils to extract the profile and level
syntax elements since it is wrong if there are emulation prevention
bytes existing in the byte-stream data.
https://bugzilla.gnome.org/show_bug.cgi?id=747613
The detection for missing format/alignment is done way before this
codepath is reached (at which point we have already decided of a
format and alignment).
CID #1232800
This prevents it from going into passthrough after receiving 2
byte-stream caps (different ones) as it would keep the have_pps and
have_sps set to true and would just go into passthrough without
updating its caps.
This patch makes it reset its stream information to restart properly
when new caps are received.
https://bugzilla.gnome.org/show_bug.cgi?id=745409
This patch calls gst_h264_parser_parse_subset_sps() when a
SPS subset NAL type is found.
All the bits required for parsing the SPS subset in NALs were
already there, just we need to call them when the this NAL type
is found.
With this parsing, the number of views (minus 1) attribute is
filled, which was a requirement for negotiating the stereo-high
profile.
https://bugzilla.gnome.org/show_bug.cgi?id=743174
Initial support for MVC NAL units. It is only needed to propagate the
complete set of NAL units downstream at this time.
https://bugzilla.gnome.org/show_bug.cgi?id=696135
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Some video bitstreams report a too restrictive set of profiles. If a video
decoder was to strictly follow the indicated profile, it wouldn't support that
stream, whereas it could in theory and in practice. So we should relax the
profile restriction for allowing the decoder to get connected with parser.
https://bugzilla.gnome.org/show_bug.cgi?id=739992
Some video bitstreams report a too restrictive set of profiles. If a video
decoder was to strictly follow the indicated profile, it wouldn't support that
stream, whereas it could in theory and in practice. So we should relax the
profile restriction for allowing the decoder to get connected with parser.
https://bugzilla.gnome.org/show_bug.cgi?id=739992
This parses the frame_packing_arragement() payload in SEI message.
This information can be used by decoders to appropriately rearrange the
samples which belong to Stereoscopic and Multiview High profiles.
https://bugzilla.gnome.org/show_bug.cgi?id=685215
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Or not negotiated in the case we would be actually not negotiated
Currently we are getting assertions from
gst_pb_utils_add_codec_description_to_tag_list because of NULL
caps.
https://bugzilla.gnome.org/show_bug.cgi?id=737186
Do more elaborate validation of the input caps: what fields
are required and/or not allowed. Don't assume AVC3 format
input without codec_data field is byte-stream format. Fix
up some now-unreachable code (CID 1232800).
It should try to use bytestream in these cases that the format
is set to _FORMAT_NONE as it seems that is what the 'else' clause
for bytestream can handle (by defaulting to _FORMAT_BYTESTREAM).
Always use a GstAdapter when collecting access units (alignment="au")
in either byte-stream or avcC format. This is required to properly
preserve config headers like SPS and PPS when invalid or broken NAL
units are subsequently parsed.
More precisely, this fixes scenario like:
<SPS> <PPS> <invalid-NAL> <slice>
where we used to reset the output frame buffer when an invalid or
broken NAL is parsed, i.e. SPS and PPS NAL units were lost, thus
preventing the next slice unit to be decoded, should this also
represent any valid data.
https://bugzilla.gnome.org/show_bug.cgi?id=732203
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Carefully track cases when skipping broken or invalid NAL units is
necessary. In particular, always allow NAL units to be processed
and let that gst_h264_parse_process_nal() function decide on whether
the current NAL needs to be dropped or not.
This fixes parsing of streams with SEI NAL buffering_period() message
inserted between SPS and PPS, or SPS-Ext NAL following a traditional
SPS NAL unit, among other cases too.
Practical examples from the H.264 AVC conformance suite include
alphaconformanceG, CVSE2_Sony_B, CVSE3_Sony_H, CVSEFDFT3_Sony_E
when parsing in stream-format=byte-stream,alignment=au mode.
https://bugzilla.gnome.org/show_bug.cgi?id=732203
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Improve parser state tracking by introducing new flags reflecting
it: "got-sps", "got-pps" and "got-slice". This is an addition for
robustness purposes.
Older have_sps and have_pps variables are kept because they have
a different meaning. i.e. they are used for deciding on when to
submit updated caps or not, and rather mean "have new SPS/PPS to
be submitted?"
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Use gst_h264_parser_identify_nalu_unchecked() to identify the next
NAL unit. We don't want to parse the full NAL unit, but only the
header bytes and possibly the first RBSP byte for identifying the
first_mb_in_slice syntax element.
Also fix check for failure when returning from that function. The
only success condition for that is GST_H264_PARSER_OK, so use it.
https://bugzilla.gnome.org/show_bug.cgi?id=732154
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
The gst_h264_parse_pps() function dynamically allocates the slice
group ids map array, so that needs to be cleared before parsing a
new PPS NAL unit again, or when it is no longer needed.
Likewise, a clean copy to the internal NAL parser state needs to be
performed so that to avoid a double-free corruption.
https://bugzilla.gnome.org/show_bug.cgi?id=707282
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
The recovery point SEI message helps a decoder in determining if the
decoding process would produce acceptable pictures for display after
the decoder initiates random access or after the encoder indicates
a broken link in the coded video sequence.
This is not used in the h264parse element, but it could help debugging.
https://bugzilla.gnome.org/show_bug.cgi?id=723380
It is not perfect but it allows us to be sure that the mandatory 'framerate'
field is present in the caps.
As soon as some information is found in the stream, that will be
updated.
https://bugzilla.gnome.org/show_bug.cgi?id=723243
An SEI RBSP could contains more than one SEI message as specified in
7.4.2.3.1.
This commit change the parser API: the gst_h264_parser_parse_sei()
function now create and fill a GArray containing GstH264SEIMessage.
https://bugzilla.gnome.org/show_bug.cgi?id=721715
Conversion to byte-stream/nal crashes without that because the
baseparse frame of all NALUs is finished for the first NALU, then
used again for parsing the second NALU. Just that now the buffer
of the frame is already gone. Instead we create temporary frames
for every NALU.
the initial par_n = par_d = 0; was always overwritten since the switch/case
handles all values
And remove the 0 case (it's the same handling as default)
When outputting in AVC3 stream format, the codec_data should not
contain any SPS or PPS, because they are embedded inside the stream.
In case of avc->bytestream h264parse will push the SPS and PPS from
codec_data downstream at the start of the stream, at intervals
controlled by "config-interval" and when there is a codec_data change.
In the case of avc3->bytstream h264parse detects that there is
already SPS/PPS in the stream and sets h264parse->push_codec to FALSE.
Therefore avc3->bytstream was already supported, except for the stream
type.
In the case of bystream->avc h264parse will generate codec_data caps
from the parsed SPS/PPS in the stream. However it does not remove these
SPS/PPS from the stream. bytestream->avc3 is the same as bytestream->avc
except that the codec_data must not have any SPS/PPS in it.
|--------------+-------------+-------------------|
|stream-format | SPS in-band | SPS in codec_data |
|--------------+-------------+-------------------|
| avc | maybe | always |
|--------------+-------------+-------------------|
| avc3 | always | never |
|--------------+-------------+-------------------|
Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new
structure for fragmented MP4 called "avc3". The principal difference
between AVC1 and AVC3 is the location of the codec initialisation
data (e.g. SPS, PPS). In AVC1 this data is placed in the initial MOOV box
(moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data goes in the
first sample of every fragment.
https://bugzilla.gnome.org/show_bug.cgi?id=702004
