Commit graph

31 commits

Author SHA1 Message Date
Edward Hervey
2f95cbd551 matroska-demux: Properly handle early time-based segments
Refusing an incoming segment in < GST_MATROSKA_READ_STATE_DATA should only be
done if the incoming segment is not in GST_FORMAT_TIME.

In GST_FORMAT_TIME, we are just storing the values and returning, so we can
invert the order of the checks.

Fixes proper segment propagation in matroska/webm DASH use-cases

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3914>
2023-06-22 06:56:33 +00:00
Mark Hymers
1ae8af4909 matroska: Add support for more pixel formats
- Add support for GRAY16_LE (using ffmpeg fourcc mapping)
- Update documentation

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4824>
2023-06-14 13:40:58 +00:00
Daniel Morin
00178cbd89 matroska: Add new pixels format support
- Add support for GRAY10_BE32
- Add support for RGBA64_LE and BGRA64_LE

Sponsored by Living Optics

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4824>
2023-06-14 13:40:57 +00:00
Tim-Philipp Müller
f3c126d07c matroska-demux: fix accumulated base offset in segment seeks
When doing a segment seek, the base offset in the new segment
would be increased by segment.position which is basically the
timestamp of the last packet. This does not include the duration
of the last packet though, so might be slightly shorter than the
actual duration of the clip or the requested segment.

Increase the base offset by the segment duration instead when
accumulating segments, which is more correct as it doesn't cut
off the last frame and makes the effective loop segment duration
consistent with the actual duration returned from a duration
query.

In case a segment stop was specified it's also possible that
some data was sent beyond the stop that's necessary for decoding
so the base offset increment should be based on that then and
not on the timestamp of the last buffer pushed out.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4604>
2023-06-13 18:19:48 +00:00
Sebastian Dröge
621ec7b6e8 matroskademux: Make gst_byte_reader_get_data() usage less confusing
This is effectively the same behaviour but retrieving 0 bytes of data is
confusing to read.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4210>
2023-03-18 16:34:19 +02:00
Tim-Philipp Müller
0fc568c6b1 gst-plugins-good: re-indent with GNU indent 2.2.12
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4182>
2023-03-17 03:18:54 +00:00
Arun Raghavan
82b892ba3e matroskamux: Set rate/channels in Opus template caps
For some reason these were missed, and if caps didn't have them, we would emit
an invalid Matroska file with a 0 value for Sampling Frequency or channels.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2354
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4151>
2023-03-14 11:09:08 -04:00
Shengqi Yu
83576690b6 matroskademux: Consider TrackUID==0 a warning and not handle it as error
some special files whose trackUID is 0 can be played on the other
player. But it cannot be played in GStreamer, because trackUID 0 will be
treated as an error in matroskademux.

So, it makes sense to only consider trackUID==0 a warning and not handle
it as error

https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1821

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4036>
2023-03-01 07:38:24 +00:00
Tim-Philipp Müller
e256472ca6 matroska: drop use of GSlice
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3695>
2023-01-24 15:25:06 +00:00
Sebastian Dröge
067b5d92b4 matroska: Add stream-format = (string) obu-stream to AV1 caps
Anything else is not allowed in Matroska/WebM.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3740>
2023-01-19 12:10:40 +02:00
Víctor Manuel Jáquez Leal
64cb38685b matroskademux: Handle element's duration query.
This is small regression from commit f7abd81a.

When calling `gst_element_query()` no pad is associated with that query, but the
current code always forwards the query to the associated pad, which is NULL in
previous case. This patch checks for the pad before forwarding the query.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3404>
2022-11-14 15:10:44 +00:00
Thibault Saunier
f7abd81a45 matroskademux: Let upstream handle seeking/duration query in time if possible
So proper response are given for dash streams

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3159>
2022-10-27 19:45:44 +00:00
Thibault Saunier
8c7579e129 matroskademux: Start support for upstream segments in TIME format
So we can use matroskademux for dash webm dash streams.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3159>
2022-10-27 19:45:44 +00:00
Thibault Saunier
6a4425e46a meson: Call pkgconfig.generate in the loop where we declare plugins dependencies
Removing some copy pasted code

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2970>
2022-09-01 21:17:35 +00:00
Sebastian Dröge
cf887f1b8e matroskademux: Avoid integer-overflow resulting in heap corruption in WavPack header handling code
blocksize + WAVPACK4_HEADER_SIZE might overflow gsize, which then
results in allocating a very small buffer. Into that buffer blocksize
data is memcpy'd later which then causes out of bound writes and can
potentially lead to anything from crashes to remote code execution.

Thanks to Adam Doupe for analyzing and reporting the issue.

CVE: CVE-2022-1920

https://gstreamer.freedesktop.org/security/sa-2022-0004.html

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1226

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2612>
2022-06-15 18:35:12 +00:00
Sebastian Dröge
ad6012159a matroskademux: Fix integer overflows in zlib/bz2/etc decompression code
Various variables were of smaller types than needed and there were no
checks for any overflows when doing additions on the sizes. This is all
checked now.

In addition the size of the decompressed data is limited to 120MB now as
any larger sizes are likely pathological and we can avoid out of memory
situations in many cases like this.

Also fix a bug where the available output size on the next iteration in
the zlib/bz2 decompression code was provided too large and could
potentially lead to out of bound writes.

Thanks to Adam Doupe for analyzing and reporting the issue.

CVE: CVE-2022-1922, CVE-2022-1923, CVE-2022-1924, CVE-2022-1925

https://gstreamer.freedesktop.org/security/sa-2022-0002.html

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1225

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2610>
2022-06-15 17:50:55 +00:00
Nicolas Dufresne
0f15580853 matroska: Fix AV1 alignment to TU
Matroska stores AV1 in temporal unit, so that all OBU sharing the same
timestamp are put together. This was previously just assumed, which isn't
safe now that we have more alignments.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1837>
2022-03-04 21:58:15 +00:00
Tristan Matthews
9d0d001d19 matroskamux: allow width+height caps changes for VP8/9
For VP8 and VP9, width+height changes are signalled inband.

Refs https://github.com/Kurento/bugtracker/issues/535 and
https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/1047/diffs?commit

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1657>
2022-03-04 14:17:20 -05:00
Tristan Matthews
c6ba57eb8e matroskamux: allow width + height changes for avc3|hev1
For avc3 and hev1, the intent was to allow more flexibility for caps changes
(see https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/1047/diffs?commit_id=9bd8d608d5bae27ec5ff09e733f76ca32b17420c)
however width and resolution were previously omitted.

avc3 and hev1 specifically support changing stream-parameters on the fly, whereas avc1/hvc1 disallow in-band SPS.

This commit allows for changes to width and height for these which is in line with matroskamux's behaviour prior to 1.14.0.

Practically speaking, one use case where this is commonly seen is when capturing a WebRTC stream, as the browser will adapt the resolution live.

Suggested-by: Mathieu Duponchelle "<mathieu@centricular.com>"
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1657>
2022-03-04 14:17:20 -05:00
Sebastian Dröge
9f798776e5 matroska-mux: Handle pixel-aspect-ratio caps field correctly when checking caps equality
Not having this field is equivalent with it being 1/1 so consider
it like that. The generic caps functions are not aware of these
semantics and would consider the caps different, causing a negotiation
failure when caps are changing from caps with to caps without or the
other way around.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1826>
2022-03-02 10:27:47 +00:00
Sebastian Dröge
1b851ae23f matroska-mux: Handle multiview-mode/flags caps fields correctly when checking caps equality
Not having these fields is equivalent with them being mono/0 so consider
them like that. The generic caps functions are not aware of these
semantics and would consider the caps different, causing a negotiation
failure when caps are changing from caps with to caps without or the
other way around.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1826>
2022-03-02 10:27:47 +00:00
Jan Schmidt
cebf769725 matroska-mux: If a stream has a TITLE tag, use it for the name.
If a title tag is pushed to a pad, store it as the Track name.
This means that players will use it as the human readable
description of the track, instead of something generic like 'Video'
or 'Subtitle'

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1798>
2022-03-01 13:17:40 +00:00
Jan Schmidt
7efdc9c7f5 matroskademux: Don't parse Tracks element twice
If the tracks element was parsed from the SeekEntry, don't
parse it a second time and recreate tracks, as this
loses any tags that were read using the seek table.

If a genuinely new Tracks element is found, do read that
as it is needed for MSE support.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1798>
2022-03-01 13:17:40 +00:00
Nirbheek Chauhan
4e22ef5bd2 matroska-demux: Emit a warning when no codec data found
It is bad if an mkv file does not have codec data for the ProRes
variant, so we should emit a warning. ffmpeg does the same thing.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1739>
2022-02-21 08:49:28 +00:00
Sebastian Wick
e61e069189 matroska: default prores fourcc apcn
If there is no codec private data for prores it should default to Apple
ProRes 422 Standard Definition (apcn). Can be tested with
strobe_scientist.mkv from
https://developers.google.com/media/vp9/hdr-encoding

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1734>
2022-02-18 08:38:31 +00:00
Rafał Dzięgiel
41385ab6f7 matroska: Ref index table when updating track info
Track index table array was being lost during track info update.
Ref it over to updated info, so it can be used for finding
nearest seek points.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1203>
2021-11-12 12:28:40 +00:00
Rafał Dzięgiel
478f94edc7 matroska: Use g_array_unref everywhere
Instead of using g_array_free which is not thread safe use g_array_unref instead

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1203>
2021-11-12 12:28:40 +00:00
Rafał Dzięgiel
b57a7c3de7 matroska: Set image/attachment structure mimetype
Set structure mimetype to fix data detection by mimetype in other plugins.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1205>
2021-10-21 21:42:00 +00:00
Rafał Dzięgiel
0ba65a00c9 matroska: Treat non-image structure as attachment
Otherwise each structure is named as GstTagImageInfo even if
it does not contain any images which is misleading.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1205>
2021-10-21 21:42:00 +00:00
Thibault Saunier
32a88fe16f matroskamux: Ignore some fields when renegotiating
Those values are never used in the muxer so we should not fail the
negotiation if those are changing.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1062>
2021-10-18 10:10:24 -03:00
Thibault Saunier
5ff769d731 Move files from gst-plugins-good into the "subprojects/gst-plugins-good/" subdir 2021-09-24 16:13:50 -03:00