Commit graph

266 commits

Author SHA1 Message Date
Wim Taymans
575e1de88b basesink: cleanups in position queries
Use existing boolean flag to pass position queries upstream. Also add upstream
queries for the last position queries.
2009-08-06 10:45:30 +02:00
Stian Selnes
6033efb920 basesink: Query upstream for the position if conversion in PAUSED failed
Fixes bug #590045.
2009-08-06 06:41:57 +02:00
Stefan Kost
4bfb312e13 logging: use perf category for dropped buffers 2009-07-06 19:52:44 +01:00
Wim Taymans
92b0f32d74 bufferlist: use faster gst_buffer_list_get()
Use the faster gst_buffer_list_get() to get the first buffer of a list.
2009-06-29 11:56:10 +02:00
Ognyan Tonchev
27fe127e76 basesink: take timestamp later
Make sure we don't accidentally cast a bufferlist of a buffer and try to take
the timestamp of it.

Refixes #585960
2009-06-29 11:46:00 +02:00
Tim-Philipp Müller
31ff42de21 basesink: don't do things with side effects within a g_assert()
Make the bufferlist stuff work properly when things are compiled
with -DG_DISABLE_ASSERT.
2009-06-25 11:25:46 +01:00
Branko Subasic
de5bcfc4cd basesink: add support for buffer list
Fixes #585960
2009-06-16 13:32:37 +02:00
Wim Taymans
25067558dc stepping: more stepping improvements
Update design doc with step-start docs.
Add eos field to step done message
when stepping in reverse, update the segment time field.
Flush out the current step when we are flushing.
2009-06-12 13:20:36 +02:00
Wim Taymans
23b772664b basesink: post step-start
when we clip, also stop the stepping.
Don't do QoS when stepping
Post step-start when queueing and activating the step.
2009-06-12 13:16:29 +02:00
Wim Taymans
6e633cbe33 basesink: update segment start/stop for clipping
When we start stepping, store the start/stop values of the segment before we
install new start/stop values for clipping in non-flushing steps.

for non-flushing steps, update the element start time. For flushing steps, it
does not change because running_time does not advance

Make sure we always perform the stop_stepping operations even when we drop
frames.
2009-06-09 12:06:35 +02:00
Wim Taymans
72e8d9909c basesink: do proper clipping in stepping
Update the stop position of the segment so that we clip correctly.
After clipping in non-flushing mode, rerender the remainder of the buffer.
2009-06-09 10:25:34 +02:00
Wim Taymans
89c42f8506 stepping: do flushing steps correctly
Note in the docs that a flushing step in PLAYING brings the pipeline to the lost
state and skips the data before prerolling again.

Implement the flushing step correctly by invalidating the current step
operation, which would activate the new step operation.
2009-06-08 17:41:56 +02:00
Jan Schmidt
f0f9ed875f basesink: Change awkward wording in a translateable message. 2009-06-08 16:16:27 +01:00
Wim Taymans
a4c6d04b4c basesink: add non-flushing steps
Add support for non-flushing steps and with different rates.
Clear step info when flushing
2009-06-08 16:27:36 +02:00
Wim Taymans
fa7db7d247 basesink: fix clipped start/stop after step
Use the segment helpers to get a more accurate clipped start/stop position after
a stepping operation ended.
2009-06-04 17:27:03 +02:00
Wim Taymans
957e40343d basesink: use more correct segment methods
Use the more correct new segment methods for updating the segment before and
after a step.
2009-06-04 12:53:23 +02:00
Wim Taymans
a907f8d145 basesink; handle EOS correctly.
Handle EOS and buffers without a timestamp gracefully.
Remove a warning that is not so much a warning now anymore.
2009-06-03 15:39:13 +02:00
Wim Taymans
c811d51471 basesink: forget previous times when stepping
When we start a flushing step operation, forget about the previous stream time
so that the position reporting works correctly.
2009-06-03 10:39:53 +02:00
Wim Taymans
71a5ebe638 basesink: fix regression in unit tests
Store the timestamp of the buffer after prerolling. While we are prerolled we
want to report the position of the segment start value.
2009-06-02 15:37:22 +02:00
Wim Taymans
484d188440 basesink: post a warning on excessive framedrops
When we go into emergency rendering, post a warning informing the user about
this fact.
2009-06-01 19:37:14 +02:00
Wim Taymans
5479772bec basesink: more stepping in reverse
Fix stepping and position reporting in reverse playback.
2009-06-01 13:37:29 +02:00
Wim Taymans
8c54c70d9c basesink: use start_time as the step start
Use the start_time of the element as the point from where the step operation
starts. This fixes stepping in all paused states.
2009-06-01 13:37:29 +02:00
Wim Taymans
642bb32196 basesink: catch step cases in _wait_preroll()
When a subclass is blocking in _wait_preroll() in the _render method, make sure
we can unlock the subclass and detect this return value from the render method.
2009-06-01 13:37:29 +02:00
Wim Taymans
1caab05238 basesink: more stepping in reverse fixes 2009-06-01 13:37:28 +02:00
Wim Taymans
4be27fa555 basesink: small cleanups 2009-06-01 13:37:28 +02:00
Wim Taymans
0c205b96b4 framestep: implement backwards framestep
Update framestep document, we want to pass the flush flag in the step-done
message.

Add flush flag to the gstmessage.

Update examples to use the new step-done message api.

Implement framestep with playback rates < 0.0 too.
2009-06-01 13:37:28 +02:00
Wim Taymans
1839782379 basesink: add framestepping in time 2009-06-01 13:37:28 +02:00
Wim Taymans
7a7e9629ce basesink: keep track of stepped time
Pass running_time around so that the stepping code can calculate the elapsed
time correctly.
2009-06-01 13:37:27 +02:00
Wim Taymans
f07b86f18b basesink: move stuff around, more stepping
Make start and stop_stepping methods and move their invocation in the right
places.

Perform the atual stepping operation where we have full context about the
timestamps.
2009-06-01 13:37:27 +02:00
Wim Taymans
546c959f26 basesink: first stab at frame stepping in PAUSED
Unlock the prerolled frame and recheck if we need to step.
Keep a simple counter for the frames we're about to skip while stepping and
preroll/post step_done when stepping finished.
2009-06-01 13:37:26 +02:00
Edward Hervey
9e4fa43657 basesink: Remove dead assignments.
sstart/sstop/rstart/rstop are all either:
* assigned values later on before being used in 'do_times:' (EOS and buffers)
* not used (non-EOS events)
2009-04-04 14:39:51 +02:00
Sebastian Dröge
d12034ab4b gst: Use g_once_init* or G_DEFINE_TYPE 2009-04-04 10:59:39 +02:00
Edward Hervey
6577af3635 basesink : Remove unused variable.
sync is never used anywhere in that code.
2009-04-03 12:57:24 +02:00
Tim-Philipp Müller
13f8041238 basesink: fix once-per-second 'emergency rendering' for case where all buffers but the very first are late
Due to a typo basesink didn't do any emergency rendering of late buffers
if the only buffer ever rendered was the first one with timestamp 0. This
means that in cases where the decoder is very very slow, we'd never see
any buffers but the very first one rendered. Fixes #576381.
2009-03-23 12:34:34 +00:00
Andy Wingo
e2ff005e63 basesink: propagate UPSTREAM events in pull mode too
* libs/gst/base/gstbasesink.c (gst_base_sink_send_event): Propagate
  upstream events in pull mode too.
2009-03-05 17:42:22 +01:00
Stefan Kost
df620c9cb6 basesink: move left over handling of the error case to the activate_failed label.
If was left as dead code.
2009-02-26 15:42:06 +02:00
Wim Taymans
805569c873 Don't forward LATENCY event when not ready
When we are not ready to handle a latency query (we are not yet prerolled) we
also don't try to forward the latency event because that might cause unexpected
errors when upstream is not yet linked.
2009-02-23 10:53:17 +01:00
Wim Taymans
d807bca61c GstBaseSink: use new variable to schedule preroll
Use a separate variable to keep track if we need to call the preroll method
instead of abusing the commited variable.
2009-02-03 15:27:34 +01:00
Wim Taymans
fe4233120c GstBaseSink: avoid calling preroll multiple times
Fix a regression introduced by fix for #567725 in commit
1c7ab4ed4f. We should only call the preroll
function once namely when we did not yet commit the state change.

Add a unit test to check that we call the preroll function when interrupting the
clock_wait (see #567725).

Add a unit test to check that we only call the preroll function once.
2009-02-03 12:52:49 +01:00
Wim Taymans
1c7ab4ed4f Update the last_buffer exactly with the buffer that caused the
preroll and also call the preroll method with that preroll buffer.
Fixes #567725.
2009-01-21 12:43:55 +01:00
Wim Taymans
10f9331125 libs/gst/base/gstbasesink.*: Fix documentation for the wait_clock method, rename basesink -> sink for consistency.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_wait_clock):
* libs/gst/base/gstbasesink.h:
Fix documentation for the wait_clock method, rename basesink -> sink
for consistency.
2009-01-09 15:43:17 +00:00
Wim Taymans
b2052bb385 libs/gst/base/gstbasesink.c: Release the object lock before calling the query convert pad functions to avoid deadlocks.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_get_position):
Release the object lock before calling the query convert pad functions
to avoid deadlocks.
2009-01-05 15:42:53 +00:00
Wim Taymans
1ec9399318 libs/gst/base/gstbasesink.c: Expose the render-delay as a property so things like appsink can use it to tweak the syn...
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_init), (gst_base_sink_set_property),
(gst_base_sink_get_property):
Expose the render-delay as a property so things like appsink can use it
to tweak the synchronisation.
2008-12-15 12:47:59 +00:00
Stefan Kost
95e825900f libs/gst/base/gstbasesink.c: Turn comment into gtk-doc comment.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
Turn comment into gtk-doc comment.
2008-11-24 20:02:55 +00:00
Wim Taymans
94752eaefd libs/gst/base/gstbasesink.c: Changing the render delay changes the latency and so we must post a latency message.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_render_delay):
Changing the render delay changes the latency and so we must post a
latency message.
2008-11-20 14:23:05 +00:00
Wim Taymans
0a71170006 Copy seqnums from events to messages so that they can all be related back to eachother.
Original commit message from CVS:
* gst/gstbin.c: (bin_handle_async_start),
(gst_bin_handle_message_func), (gst_bin_query):
* libs/gst/base/gstbasesink.c: (gst_base_sink_render_object),
(gst_base_sink_event), (gst_base_sink_change_state):
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_loop), (gst_base_src_change_state):
Copy seqnums from events to messages so that they can all be related
back to eachother.
2008-11-04 15:56:55 +00:00
Wim Taymans
ca9ccf1d02 libs/gst/base/gstbasesink.c: Implement more seeking in pull mode.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_default_do_seek),
(gst_base_sink_default_prepare_seek_segment),
(gst_base_sink_perform_seek), (gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_get_position),
(gst_base_sink_query):
Implement more seeking in pull mode.
Use pad convert functions to convert position to the requested format.
Fix position/duration reporting in pull mode.
Implement position and duration reporting in other formats than time.
* libs/gst/base/gstbasesink.h:
Add member to keep track of when the segment is playing.
2008-10-20 15:18:14 +00:00
Wim Taymans
4561f3bf47 libs/gst/base/gstbasesink.c: Query the total number of bytes when activating the pad in pull mode.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_pad_activate_pull),
(gst_base_sink_query):
Query the total number of bytes when activating the pad in pull mode.
Implement duration query in pull mode by using the installed pad convert
function to convert from bytes to the requested format.
2008-10-17 13:27:59 +00:00
Wim Taymans
fe07568997 Add method to commit the state in subclasses.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_do_preroll),
(gst_base_sink_flush_start), (gst_base_sink_flush_stop),
(gst_base_sink_event), (gst_base_sink_perform_seek),
(gst_base_sink_loop), (gst_base_sink_pad_activate_pull),
(gst_base_sink_send_event), (gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Add method to commit the state in subclasses.
Refactor the flush_start and flush_stop code because we need it for
flushing while seeking too.
Implement the beginnings of seeking in pull mode.
Use the segment last_stop field for the pulling offset.
Fix the pause method in pull mode.
Configure the segment to BYTES for pull mode.
API: GstBaseSink::gst_base_sink_do_preroll()
2008-10-16 14:09:18 +00:00
Wim Taymans
bc8e367885 gst/gstbin.c: The message src can be NULL, don't try to print the object names in that case.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_remove_func), (update_degree),
(gst_bin_handle_message_func):
The message src can be NULL, don't try to print the object names in that
case.
* libs/gst/base/gstbasesink.c: (gst_base_sink_pad_activate):
Add some more debug info.
* tests/check/pipelines/simple-launch-lines.c: (run_pipeline),
(GST_START_TEST):
Add some debug.
Fix the test, pull based sinks go ASYNC to PAUSED, just like other
scheduling modes.
2008-10-10 10:38:12 +00:00