Commit graph

54 commits

Author SHA1 Message Date
Peter Körner
58dadd1ad0 decklink: implement duplex-mode property 2019-03-04 09:34:44 +00:00
Edward Hervey
44390d9d1d decklinkvideosrc: Add support for extracting Closed Caption
If the "output-cc" property is set to TRUE and there is CC present
in the VBI Ancillary Data, they will be extracted and set on the
outgoing buffer as GstVideoCaptionMeta.

Only CDP packets are supported.

https://bugzilla.gnome.org/show_bug.cgi?id=773863
2018-04-23 16:16:06 +02:00
Sebastian Dröge
86888d9918 decklinkaudiosink: Re-implement around GstBaseSink instead of GstAudioBaseSink
The Decklink and GstAudioBaseSink APIs don't fit very well together,
which causes various problems due to inaccuracies in the clock
calculations and the actual ringbuffer and GStreamer's copy getting of
sync.

Problems are audio drop-outs and A/V sync getting wrong after
pausing/seeking.

https://bugzilla.gnome.org/show_bug.cgi?id=790114
2017-12-14 10:37:20 +02:00
Sebastian Dröge
02e4d92cbf decklinkvideosink: Wait until scheduled playback is actually stopped before continuing
Otherwise we might "start" again, just to get finally stopped and then
getting errors all over the place.

https://bugzilla.gnome.org/show_bug.cgi?id=790114
2017-12-06 19:38:55 +02:00
Sebastian Dröge
a563cbbc1c decklink: Add read-only property to read the device serial number
https://bugzilla.gnome.org/show_bug.cgi?id=788510
2017-10-18 12:33:28 +02:00
Sebastian Dröge
350c56dab4 decklinkaudio/videosrc: Put hardware reference timestamp in a reference timestamp meta
This can be useful to know on multi-channel cards which frames from
different channels were captured at the same time.
2017-09-28 13:55:18 +03:00
Dave Johnstone
0cd1bf13e8 decklinkvideosink: Add support for Decklink hardware keying
Add two properties (keyer-mode and keyer-level) to control the built-in hardware keyer of Decklink cards.

https://bugzilla.gnome.org/show_bug.cgi?id=773660
2017-08-15 11:09:37 +03:00
Nirbheek Chauhan
a163dff91d decklink: Fix building with MSYS2's MinGW
Reported and tested by Philippe Renon.

https://bugzilla.gnome.org/show_bug.cgi?id=784943
2017-07-20 19:18:28 +05:30
Nirbheek Chauhan
3fd4249a1d decklink: Fix CI failure due to missing WINAPI definition
WINAPI is for the windows calling convention to use, and should expand
to nothing on Linux.

https://build.gnome.org/continuous/buildmaster/builds/2017/07/18/76/build/log-gst-plugins-bad.txt
2017-07-19 04:14:13 +05:30
Sebastian Dröge
4df6be45f0 decklinkaudiosrc: Consistently pass stream_time and stream_duration to audio/video src
It's the same value now, pass it consistently.
2017-05-12 11:36:27 +02:00
Nirbheek Chauhan
8865b440d9 decklink: Fix linking on MinGW
MinGW does not provide comsupp.lib, so there's no implementation of
_com_util::ConvertBSTRToString. Use a fallback implementation that
uses wcstombs() instead.

On MinGW we also truncate the name to 100 chars which should be fine.
2017-05-05 17:49:22 +05:30
Nirbheek Chauhan
3d4c428e41 decklink: Fix building on Windows
BSTR is already a pointer to a string
2017-05-05 17:49:22 +05:30
Sebastian Dröge
4cdd234add decklink: Fix indentation 2017-01-31 14:56:34 +02:00
Sebastian Dröge
97be9446f5 decklink: Include stdint.h for int32_t, etc as needed by the Decklink headers 2017-01-31 14:56:34 +02:00
Vivia Nikolaidou
f23277e55d decklinkaudiosrc: Option to use max channels supported by device
Query the device for the maximum number of channels supported and have
an option to use that. Default is still 2.

https://bugzilla.gnome.org/show_bug.cgi?id=777458
2017-01-26 16:18:57 +02:00
Vivia Nikolaidou
3cb43f35b8 decklinkvideosrc: Do not append a zero timecode if none is found on the source
If the source doesn't give us timecode information, do not append a zero
timecode to the frames.

https://bugzilla.gnome.org/show_bug.cgi?id=776900
2017-01-09 18:37:50 +02:00
Sebastian Dröge
e8e531ee12 decklinkaudiosrc: Add support for 8/16 channels via property
These are unpositioned channel layouts.
2017-01-03 17:30:07 +02:00
Sebastian Dröge
fdf1a57953 decklink: Correctly set top-field-first/bottom-field-first
First of all, all the HD and UHD modes should be top-field-first, as
also returned by the Decklink mode iterator API.

Then we should include the caps field "field-order" in the caps of the
source (not the sink due to negotiation problems with optional fields).

And finally we should set the TFF flag on interlaced buffers that are
top-field-first.
2016-11-28 17:19:26 +02:00
Sebastian Dröge
cf224a9990 decklinksrc: Set GAP flag on buffers that are captured without signal
https://bugzilla.gnome.org/show_bug.cgi?id=774850
2016-11-28 14:27:51 +02:00
Sebastian Dröge
881a08671e decklinksrc: Stop using the "hardware" timestamps and directly use the pipeline clock
The hardware timestamps have no relation to when frames were produced,
only when frames arrived somewhere in the hardware. Especially there is
no guarantee that audio and video will have the same hardware timestamps
although they belong together, and even more important: the rate with
which the hardware timestamps increase is completely unrelated to the
rate with which the frames are captured!

As such we can as well use the pipeline clock directly and stop doing
complicated calculations. Also as a side effect this allows now running
without any pipeline clock, by directly making use of the stream times
as reported by the driver.

https://bugzilla.gnome.org/show_bug.cgi?id=774850
2016-11-28 14:27:51 +02:00
Sebastian Dröge
6fdd4d8288 decklinkaudiosink: Add support for 8 and 16 channels 2016-08-26 15:49:40 +03:00
Vivia Nikolaidou
8faa36e105 decklinkvideosrc: Add support for GstVideoTimeCode
The timecode will be fetched from the decklink source and attached to the
video buffer.

https://bugzilla.gnome.org/show_bug.cgi?id=766419
2016-08-04 19:08:27 +03:00
Vivia Nikolaidou
832764d2fd decklink: Add initial 10bit support for YUV modes
https://bugzilla.gnome.org/show_bug.cgi?id=742878
2016-05-03 15:57:23 +03:00
Sebastian Dröge
0004920c83 decklinkaudiosrc: Don't crash when receiving video frames but no audio
And mark these events as disconts to reset time tracking in the audio source.

https://bugzilla.gnome.org/show_bug.cgi?id=747633
2016-04-05 14:47:00 +03:00
Julien Moutte
3ea431c5b5 decklinkvideosrc: implement RGB capture support
Combine mode and format to generate caps and support the flags from VideoChanged callback to support RGB capture.

https://bugzilla.gnome.org/show_bug.cgi?id=760594
2016-01-22 16:11:08 +01:00
Vivia Nikolaidou
fafc8e564c decklinkvideosink: Made "auto" mode work according to caps
When the mode of decklinkvideosink is set to "auto", the sink claims to
support the full set of caps that it can support for all modes. Then, every
time new caps are set, the sink will automatically find the correct mode for
these caps and set it.

Caveat: We have no way to know whether a specific mode will actually work for
your hardware. Therefore, if you try sending 4K video to a 1080 screen, it
will silently fail, we have no way to know that in advance. Manually setting
that mode at least gave the user a way to double-check what they are doing.

https://bugzilla.gnome.org/show_bug.cgi?id=759600
2015-12-18 16:08:02 +01:00
Sebastian Dröge
9764e22a5c decklink: Add a clock epoch that is used as offset whenever restarting the clock
Otherwise we're going to return times starting at 0 again after shutting down
an element for a specific input/output and then using it again later.

https://bugzilla.gnome.org/show_bug.cgi?id=755426
2015-09-24 09:32:36 +02:00
Heinrich Fink
6007829e77 decklink: Rename mode 2048p to 1556p
https://bugzilla.gnome.org/show_bug.cgi?id=749218
2015-05-11 13:20:11 +03:00
Heinrich Fink
e6d82dec32 decklink: Rename mode 3184p to 2160p
https://bugzilla.gnome.org/show_bug.cgi?id=749218
2015-05-11 13:14:15 +03:00
Sebastian Dröge
f0e85023c2 decklink{audio,video}src: Implement clock slaving if the pipeline clock is not the decklink clock 2015-02-09 17:17:37 +01:00
Sebastian Dröge
22b0a4dad5 decklink{audio,video}src: Take the capture times from the pipeline clock
Not from the decklink clock. Both will return exactly the same time once the
decklink clock got slaved to the pipeline clock and received the first
observation, but until then it will return bogus values. But as both return
exactly the same values, we can as well use the pipeline clock directly.
2015-02-08 21:56:04 +01:00
Sebastian Dröge
4eb5cd9156 decklink{audio,video}sink: Only start scheduled playback once both sources are ready and we are in PLAYING
Otherwise we might start the scheduled playback before the audio or video streams are
actually enabled, and then error out later because they are enabled to late.

We enable the streams when getting the caps, which might be *after* we were
set to PLAYING state.
2015-01-28 16:13:16 +01:00
Sebastian Dröge
e2ff5587fe decklink{audio,video}src: Only start the streams once both sources are ready and we are in PLAYING
Otherwise we might start the streams before the audio or video streams are
actually enabled, and then error out later because they are enabled to late.

We enable the streams when getting the caps, which might be *after* we were
set to PLAYING state.
2015-01-28 16:13:16 +01:00
Sebastian Dröge
00176a1ddf decklink: Make sure our clock never returns NONE, always advances and does not jump when going from PAUSED to PLAYING
It basically behaves the same as the audio clocks.
2015-01-28 16:13:16 +01:00
Sebastian Dröge
ab9ee34aba decklink: Use BT2020 colorspace for UltraHD resolutions 2015-01-13 19:56:45 +01:00
Florian Langlois
9480d91ad4 decklinkvideosrc: Add automatic mode detection
https://bugzilla.gnome.org/show_bug.cgi?id=739284
2015-01-08 18:16:12 +01:00
Sebastian Dröge
34de6ad73b decklink: Add XLR and RCA audio connection enums 2015-01-08 12:23:53 +01:00
Sebastian Dröge
a35d5ae9b9 decklinkvideosrc: Add auto value for the connection property
This will use the default/auto connection for video capturing, and can
be set via the Decklink configuration tools.
2015-01-08 12:23:09 +01:00
Florian Langlois
81c1ef190d decklink: Add property for configuring the input connection of the video sources 2015-01-08 12:12:50 +01:00
Sebastian Dröge
196d9c4829 decklink: Add support for 4K / UHD modes 2014-12-29 17:58:37 +01:00
Sebastian Dröge
aac0027ed2 decklink: Implement latency query in sources and remember selected mode 2014-12-19 14:40:40 +01:00
Sebastian Dröge
6d931a0c0e decklink: Add initial version of audio and video sources 2014-12-19 14:40:39 +01:00
Sebastian Dröge
57d46fe9e1 decklink: Initial version of the audio/video sink rewrite 2014-12-19 14:40:39 +01:00
Sebastian Dröge
11485e32ab decklink: Add support for 2k modes 2014-11-24 14:11:04 +01:00
Tim-Philipp Müller
9e1b75fda3 Fix FSF address
https://bugzilla.gnome.org/show_bug.cgi?id=687520
2012-11-04 00:09:59 +00:00
David Schleef
65a1f79bcb decklink: change device instance lifecycle
The decklink driver eventually crashes after repeated creation/deletion
of device, input, output, and configuration objects.  Change to create
these at the outset and keep them around forever.
2012-09-23 21:27:36 +01:00
David Schleef
aca69cbf63 decklinksink: Add device property
Also add property probe for device property, similar to decklinksrc.
2012-03-17 15:07:49 -07:00
David Schleef
8f8d7bf781 decklink: Add 10-bit support 2012-02-18 17:04:44 -08:00
David Schleef
1c73e77e32 decklink: fix compilation on Linux 2011-08-21 19:06:54 -07:00
Joshua M. Doe
cfd68a8e7a decklink: add support for Windows
Builds with MSVC, not tested in MinGW or anything else. Added
COM handling code, borrowed from dshowvideosink. Moved Linux
specific files to ./linux and added Windows specific files to
./win (generated from IDL files in VS9). Added macros to handle
BSTR and defined bool as BOOL.  Fixes #655362.

Signed-off-by: David Schleef <ds@schleef.org>
2011-08-21 19:06:05 -07:00