Original commit message from CVS:
2008-02-29 Julien Moutte <julien@fluendo.com>
* ext/alsa/gstalsa.c: (gst_alsa_open_iec958_pcm),
(gst_alsa_probe_supported_formats): Probe for IEC958 pcm to
detect
if we can do SPDIF output.
* ext/alsa/gstalsa.h:
* ext/alsa/gstalsasink.c: (set_hwparams), (alsasink_parse_spec),
(gst_alsasink_prepare), (gst_alsasink_close),
(gst_alsasink_write):
* ext/alsa/gstalsasink.h: Initial support for SPDIF.
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_parse_caps):
* gst-libs/gst/audio/gstringbuffer.h: Add non linear buffer
types
to support AC3, EC3 and IEC958 buffers.
Original commit message from CVS:
* ext/alsa/gstalsa.c:
* ext/alsa/gstalsadeviceprobe.c:
* ext/alsa/gstalsamixer.c:
* ext/alsa/gstalsasink.c:
* ext/alsa/gstalsasrc.c:
Change alsa alloca's to malloc to fix warnings on gcc-4.2.
Original commit message from CVS:
* ext/alsa/Makefile.am:
There is no GST_PLUGINS_BASE_LIBS defined.
* ext/alsa/gstalsa.c:
* ext/alsa/gstalsasink.c: (gst_alsasink_delay):
* ext/alsa/gstalsasrc.c: (gst_alsasrc_delay):
Add support for ALSA 24-bit formats.
snd_pcm_delay can return an error code, especially
during XRUNS. In that case, the best we can do is assume
delay = 0.
* gst/audioconvert/Makefile.am:
Add flags from -base before any more-remote dependencies.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_find_device_name):
Try to get devic-name from device string first, and from handle only
as fallback (seems to yield better results and is more robust
against buggy probing code on the application side).
Original commit message from CVS:
Based on patch by: Julien Puydt <julien.puydt at laposte net>
* ext/alsa/gstalsa.c: (gst_alsa_find_device_name_no_handle),
(gst_alsa_find_device_name):
* ext/alsa/gstalsa.h:
* ext/alsa/gstalsasink.c: (gst_alsasink_get_property):
* ext/alsa/gstalsasrc.c: (gst_alsasrc_get_property):
Improve device-name detection a bit, especially in the case where
the device is not actually open (#405020, #405024). Move common code
into gstalsa.c instead of duplicating it.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_detect_rates),
(gst_alsa_detect_channels), (gst_alsa_probe_supported_formats):
Small code cleanup.
* ext/alsa/gstalsamixer.c: (gst_alsa_mixer_open),
(gst_alsa_mixer_new):
Remove hack that always set the device to hw:0*.
Properly find the card name for whatever device was configured.
Do some better debugging.
Fixes#350784.
* ext/alsa/gstalsamixerelement.c:
(gst_alsa_mixer_element_set_property),
(gst_alsa_mixer_element_change_state):
Cleanups.
Handle setting of a NULL device name better.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (caps_add_channel_configuration),
(gst_alsa_detect_channels):
* ext/alsa/gstalsasink.c:
Add support for cards that (only) do more than 8 channels,
like the Delta 44 (#345188).
* gst-libs/gst/audio/multichannel.c:
(gst_audio_check_channel_positions):
* gst-libs/gst/audio/multichannel.h:
API: add GST_AUDIO_CHANNEL_POSITION_NONE, which stands for an
unspecified channel position and cannot be combined with any
of the other audio channel positions; adjust position layout
checks accordingly (#345188).
Original commit message from CVS:
* ext/alsa/gstalsa.c: (caps_add_channel_configuration):
Fix typo, so that alsasink also advertises 8 channels
if that's supported (tags: can, worms, open, alsa, ph34r).
Original commit message from CVS:
* ext/alsa/Makefile.am:
* ext/alsa/gstalsa.c: (gst_alsa_detect_rates),
(gst_alsa_detect_formats), (get_channel_free_structure),
(caps_add_channel_configuration), (gst_alsa_detect_channels),
(gst_alsa_probe_supported_formats):
* ext/alsa/gstalsa.h:
* ext/alsa/gstalsasink.c: (gst_alsasink_getcaps):
Refactor and improve caps probing code: probe signedness
when we probe the supported formats/widths; set endianness
to the one we actually probed for (ie. cpu endianness).
* ext/alsa/gstalsasrc.c: (gst_alsasrc_init), (gst_alsasrc_getcaps),
(gst_alsasrc_close):
* ext/alsa/gstalsasrc.h:
Implement caps probing for alsasrc.
Original commit message from CVS:
2005-08-19 Andy Wingo <wingo@pobox.com>
* ext/alsa/gstalsamixertrack.h:
* ext/alsa/gstalsamixertrack.c:
* ext/alsa/gstalsamixeroptions.h:
* ext/alsa/gstalsamixeroptions.c:
* ext/alsa/gstalsamixer.h:
* ext/alsa/gstalsamixer.c: Port to 0.9.
* ext/alsa/Makefile.am: Build mixer, mixeroptions, mixertracks.
Remove gstalsa.c and alsaclock. No more cruft here.
Original commit message from CVS:
* common/gtk-doc-plugins.mak:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-base-plugins-docs.sgml:
* docs/plugins/gst-plugins-base-plugins-sections.txt:
renamed to actual element names, so much nicer to look at
* docs/plugins/tmpl/gstmultifdsink.sgml:
remove
* docs/plugins/tmpl/multifdsink.sgml:
* docs/plugins/tmpl/tcpserversink.sgml:
add
* ext/alsa/gstalsa.c:
* ext/cdparanoia/gstcdparanoia.c: (cdparanoia_get_property):
* ext/ogg/gstoggmux.c:
* gst/audioconvert/gstaudioconvert.c: (gst_audio_convert_chain):
* gst/playback/gstdecodebin.c:
* gst/tcp/gstmultifdsink.c: (gst_multifdsink_class_init):
* gst/tcp/gsttcpserversink.c:
various fixes and documentation additions
Original commit message from CVS:
* TODO:
delete this file, it is by far outdated
* ext/alsa/gstalsa.1: remove
* ext/alsa/gstalsa.c: (add_rates), (add_channels), (gst_alsa_caps),
(gst_alsa_check_sample_rates), (gst_alsa_rates_probe),
(gst_alsa_get_caps):
Add HW probing for supported sample rates. Fixes#161704
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_class_init), (gst_alsa_get_caps):
* ext/alsa/gstalsa.h:
Add HW probing for period_count/size and buffer_size MIX/MAX
Adjust default/user defined value if out of bounds
Should fix bug #162024
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_change_state):
Reset variables on READY.
* gst/matroska/matroska-mux.c: (gst_matroska_mux_request_new_pad),
(gst_matroska_mux_loop):
Require data before writing header.
Original commit message from CVS:
* configure.ac:
Fix indentation, fix v4l2 plugin detection.
* ext/Makefile.am:
Fix libmms location (Maciej, use diff -u!).
* ext/alsa/gstalsa.c: (gst_alsa_init):
Initialize caps cache to NULL.
* gst/playback/gstplaybin.c: (gst_play_bin_change_state):
Only change state on audiosink if it exists.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_get_caps), (gst_alsa_close_audio):
* ext/alsa/gstalsa.h:
refactor big chunks of the core caps negotiation code to make it
a lot faster, because people claim it's really slow
(actually, just cache the getcaps when the device is opened)
Original commit message from CVS:
2004-11-28 Martin Soto <martinsoto@users.sourceforge.net>
* ext/alsa/gstalsasink.c (gst_alsa_sink_loop):
* ext/alsa/gstalsa.h:
* ext/alsa/gstalsa.c (gst_alsa_set_clock):
Make alsasink actually honor gst_element_set_clock and use that
clock instead of ist internal one.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_get_caps):
Don't omit the last (which incase of dmix is the only :) )
channel count. Don't set channels if <= 2.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_pcm_wait):
add debugging
* ext/alsa/gstalsasink.c: (gst_alsa_sink_loop):
do a wait when we enter the loop func with no data available to
write instead of getting into an 100% CPU loop by just returning and
being called again by the scheduler
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_change_state):
Only set hardware parameters *after* negotiation. Before
negotiation, it will set ANY and that seems to cause crashes
(see e.g. #151288, #153227).
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_get_caps_internal):
buffer-frames property was missing
* ext/arts/gst_arts.c:
rate missing from sinkcaps
* ext/audiofile/gstafparse.c:
* ext/audiofile/gstafsink.c:
* ext/audiofile/gstafsrc.c:
* ext/swfdec/gstswfdec.c:
int audio doesn't know buffer-frames
* ext/cdparanoia/gstcdparanoia.c:
int audio doesn't know chunksize either
* ext/nas/nassink.c:
it's endianness, not endianess
* gst-libs/gst/audio/audio.h:
make float standard pad template caps really describe float
* gst/law/mulaw.c: (linear_factory):
signed only, please
* gst/mpegstream/gstdvddemux.c:
widths of 20 are not valid
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_open_audio),
(gst_alsa_sw_params_dump), (gst_alsa_hw_params_dump),
(gst_alsa_close_audio):
disable some of the debugging code for now. Writing debugging to a
buffer is broken in current alsalib releases.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_xrun_recovery):
only restart audio when we indeed have an xrun to fix repeated
xruns. Fix suggested by Giuliano Pochini.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_xrun_recovery):
use our own functions for restarting the alsa device.
* ext/alsa/gstalsasink.c: (gst_alsa_sink_check_event):
I should apply patches myself - use MIN for the third argument, not
the second, this fixes seeking
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_start), (gst_alsa_xrun_recovery):
* ext/alsa/gstalsa.h:
* ext/alsa/gstalsasrc.c: (gst_alsa_src_init),
(gst_alsa_src_update_avail), (gst_alsa_src_loop):
Use alsa trigger_tstamp to get the timestamp of the first
sample in the buffer for more precise sync. Some cleanups.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_change_state), (gst_alsa_start),
(gst_alsa_xrun_recovery):
* ext/alsa/gstalsa.h:
* ext/alsa/gstalsasink.c: (gst_alsa_sink_check_event),
(gst_alsa_sink_loop), (gst_alsa_sink_get_time):
* ext/alsa/gstalsasrc.c: (gst_alsa_src_init),
(gst_alsa_src_get_time), (gst_alsa_src_update_avail),
(gst_alsa_src_loop):
Add clock to alsasrc. Take new capture timestamp when
restarting after an overrun. Split up some functions between
alsasrc ans alsasink.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_get_time), (gst_alsa_clock_update),
(gst_alsa_change_state), (gst_alsa_update_avail),
(gst_alsa_xrun_recovery):
* ext/alsa/gstalsa.h:
* ext/alsa/gstalsasrc.c: (gst_alsa_src_loop):
Cleanups, take queued samples into account when reporting
the time.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_init), (gst_alsa_dispose),
(gst_alsa_get_time), (gst_alsa_xrun_recovery):
* ext/alsa/gstalsa.h:
* ext/alsa/gstalsaclock.c: (gst_alsa_clock_get_type):
* ext/alsa/gstalsasrc.c: (gst_alsa_src_init), (gst_alsa_src_loop),
(gst_alsa_src_change_state):
* ext/alsa/gstalsasrc.h:
Make the xrun code timestamp and offset the buffers correctly.
moved the clock to the base class, use alsa methods to get time.
Do correct timestamping on outgoing buffers.
Original commit message from CVS:
2004-06-14 Benjamin Otte <otte@gnome.org>
* ext/alsa/gstalsa.c: Use snd_pcm_hw_params_set_rate _near instead of
snd_pcm_hw_params_set_rate since the latter fails for no good
reason on some setups.<
Original commit message from CVS:
* ext/alsa/gstalsa.c: (add_channels):
handle min <= max correctly
* ext/alsa/gstalsa.c: (gst_alsa_fixate_to_mimetype),
(gst_alsa_fixate_field_nearest_int), (gst_alsa_fixate):
add fixation functions so we fixate correctly. No preferring of alaw
anymore because it's the first structure.
* ext/alsa/gstalsa.h:
* ext/alsa/gstalsa.c: (gst_alsa_sw_params_dump),
(gst_alsa_hw_params_dump):
add functions to ease debugging in alsalib
* ext/alsa/gstalsa.c: (gst_alsa_probe_hw_params),
(gst_alsa_set_hw_params), (gst_alsa_set_sw_params),
(gst_alsa_start_audio):
only specify hw params if we really setup a format (fixes#134007 -
or at least works around it)
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_samples_to_timestamp):
cast to GstClockTime to get higher granularity
* ext/alsa/gstalsasink.c: (gst_alsa_sink_check_event):
use gst_element_set_time_delay to get the exact time
* ext/mad/gstmad.c: (gst_mad_chain):
use the negotiated rate instead of the current frame's rate which
might be wrong because of bit errors. This avoids emitting totally
bogus timestamps and screwing sync.
(fixes#143454)
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_probe_hw_params),
(gst_alsa_set_hw_params), (gst_alsa_set_sw_params),
(gst_alsa_start_audio):
- don't call set_periods_integer anymore, it breaks the
configuration randomly
- call snd_pcm_hw_params_set_access directly instead of using masks
- don't fail if the sw_params can't be set, just use the default
params and hope it works. Alsalib has weird issues when you touch
sw_params and does no proper error reporting about what failed.
* ext/alsa/gstalsa.c: (gst_alsa_open_audio),
(gst_alsa_close_audio):
make our alsa debugging go via gst debugging and not conditionally
defined
* ext/alsa/gstalsa.h:
add ALSA_DEBUG_FLUSH macro
* ext/alsa/gstalsaplugin.c: (gst_alsa_error_wrapper),
(plugin_init):
wrap alsa errors to be printed via the gst debugging system and not
spammed to stderr
Original commit message from CVS:
* ext/alsa/gstalsa.c: (device_list),
(gst_alsa_class_probe_devices):
* ext/alsa/gstalsamixer.c: (gst_alsa_mixer_open):
Fix alsa oddness in mixer after the combination of using mixer
in source/sink elements and using hw:x,y instead of just hw:x.
