string_of_va_chroma_format() gets a wrong string format description.
For example, the YUV420_10BPP get a string of 0x00000100 as output.
It's because VA_RT_FORMAT_xxx values are macro definitions. And
STRINGIFY(VA_RT_FORMAT_xxx) will expand to its real value
0x00000XXX.
To avoid the macro evaluation, it is changed to show only the color
format without VA_RT_FORMAT_ prefix.
When the downstream has any caps, then raw video feature will
be used. At this situation, the preferred format should be chose
from caps which contains "vide/x-raw" feature instead of from
the fist allowed caps.
Fixes#142
The current manner can not recognize the correct level and always
set the tier to main. Need to add frame rate check to recognize
levels such as 4.1, 6.2, etc. We also add a logic to check main
and high tier based on bitrate.
Fixes: #145
media-driver currently fails to set a correct value of max_qp when
min_qp is different to zero, in CBR and VBR mode, generating full
quality frames, thus unexpected huge output.
This patch sets max_qp to an arbitrary value to avoid this output
temporary.
Fixes: #144
Currently the minimal value for either min_qp and init_qp are 1,
but VA documentation specifiy that zero is also valid and means
to ignore the quantiser.
The default value is not changed though to avoid behaivor changes
to users.
x11_dep and libva_x11_dep are optional and meson ignores these
dependencies even if they are added into the dependency list.
This fixes the error below when libva-x11 is not avaiblabe:
cc -Itests/elements/tests@elements@@test-vaapicontext@exe
-Itests/elements -I../../gstreamer-vaapi/tests/elements -I.
-I../../gstreamer-vaapi/ -Igst-libs -I../../gstreamer-vaapi/gst-libs
-I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0
-I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/orc-0.4
-I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0
-I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include
-I/usr/include/gtk-3.0 -I/usr/include/gio-unix-2.0/
-I/usr/include/libdrm -I/usr/include/harfbuzz -I/usr/include/pango-1.0
-I/usr/include/fribidi -I/usr/include/atk-1.0 -I/usr/include/cairo
-I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2
-I/usr/include/libpng16 -I/usr/include/gdk-pixbuf-2.0
-fdiagnostics-color=always -pipe -D_FILE_OFFSET_BITS=64 -Wall
-Winvalid-pch -O2 -g -fvisibility=hidden -fno-strict-aliasing -pthread
-DHAVE_CONFIG_H -MD -MQ
'tests/elements/tests@elements@@test-vaapicontext@exe/test-vaapicontext.c.o'
-MF
'tests/elements/tests@elements@@test-vaapicontext@exe/test-vaapicontext.c.o.d'
-o
'tests/elements/tests@elements@@test-vaapicontext@exe/test-vaapicontext.c.o'
-c ../../gstreamer-vaapi/tests/elements/test-vaapicontext.c
../../gstreamer-vaapi/tests/elements/test-vaapicontext.c:29:10: fatal
error: va/va_x11.h: No such file or directory
#include <va/va_x11.h>
GValueArray is deprecated. Use GstValueArray instead.
gst_param_spec_array can be deserialized from command line using:
vaapih264enc view-ids="<(uint)40,(uint)100>" num-views=2
While the g_param_spec_value_array() can not, and always get
error: "gst_value_deserialize_g_value_array: unimplemented"
Also fixed an out-of-range bug.
The order in gst_vaapi_enc_picture_encode when encoding one
picture is not very correct. The misc parameters are set before
the picture parameters. Some of the misc parameters such as
ROI may change the current picture parameters. But the later
setting of picture parameter will re-init all picture related
parameters and clear the previous setting. The right order
should be picture parameter first and then misc parameters.
Signed-off-by: He Junyan <junyan.he@hotmail.com>
The vaapi internal encoder's property id are negative, thus they are
different from GObject's property ids.
gst_vaapi_encoder_set_property() should map to the internal encoder
property id, assigned in gst_vaapiencode_default_set_property().
When downstream has any caps, vaapi should not shovel vaapi featured
buffers, but rather plain raw video, assuming always the worst case
scenario (downstream cannot handle featured video memory but raw
system memory buffers).
This patch query the peer caps without any filter, to know if
donwstream just ask for any caps, if so jump to the color space
checking, otherwise do the caps intersection and continue with the
feature selection algorithm.
Fixes: #139
We prefer to use the same format between image and surface for gst
vaapi allocator. The old way may choose different formats between
image and surface. For example, the RGBA image may have a NV12 surface.
So we need to do format conversion when we put/get image to surface.
Some drivers such as iHD can not support such conversion and always
cause a data flow error. There may also have some performance cost
for format conversion when put/get images.
So we prefer to use the same format for image and surface in the
allocator. If the surface can not support that format, we then
fallback to find a best one as the surface format.
Co-authored-by: Víctor Jáquez <vjaquez@igalia.com>
This code is just confused. It's asking for at least as many bits of
(z-axis) depth as the root window has bits of (color) depth. For rgb565
or rgb888 this is harmless, but at 10 bits per channel this demands a
30-bit or deeper Z buffer. While some hardware could in principle do a
32-bit Z buffer, Mesa does not expose such fbconfigs (at least on Intel
and AMD).
We're not actually using the Z buffer, so just stop asking for one.
[wl_shell] is officially [deprecated], so provide support for the
XDG-shell protocol should be provided by all desktop-like compositors.
(In case they don't, we can of course fall back to wl_shell).
Note that the XML file is directly provided by the `wayland-protocols`
dependency and generates the protocol marshalling code.
[wl_shell]: https://people.freedesktop.org/~whot/wayland-doxygen/wayland/Client/group__iface__wl__shell.html
[deprecated]: 698dde1958
native-id property is problematic since the variable that stores it is
gsize, which is platform specific, and in some is bigger than unsigned
long, and there are not way to handle gsize properties.
Also, GST_VAAPI_ID_INVALID is defined in gsize terms, and we would
like to keep using it for this scope.
This patch removes the native-id property and set it manually in
gst_vaapi_window_new_internal().
gst_vaapi_encoder_put_frame() and gst_vaapi_encoder_flush() duplicates
the same code segment where the coded buffer is created, the picture
encoded on it and pushed to the async queue.
The function gst_vaapi_encoder_encode_and_queue() refactor this.
In order to flush the pending pictures, a new internal encoder vmethod
is used: get_pending_reordered()
This method follows an iterator pattern which will return the next
picture to encode and push.
The base encoder will call this function in a loop when flush() is called.
For now, only H.264 and H.265 encoders implement this flushing mechanism.
Fix the deinterlace black frame when playing with glimagesink:
gst-launch-1.0 filesrc location=test.264 ! h264parse ! vaapih264dec \
! vaapipostproc deinterlace-mode=1 deinterlace-method=1 ! glimagesink
