Properly handle edts segments for push-based operation seeking.
We only support edts that a single segment that has media at the end,
being preceeded by any number of gap segments.
This also allows the qt segment rate to be respected after seeks
https://bugzilla.gnome.org/show_bug.cgi?id=765669
Via the MPEG-4 Part 3 spec we can support the other layers too.
Also correct the samples per frame calculation for MP3 if it's MPEG-2 or
MPEG-2.5.
https://bugzilla.gnome.org/show_bug.cgi?id=765725
timescale/1 is unreliable value for framerate. Due to downstream
element usually use framerate generated by qtdemux, let it be omitted
until the framerate can be reliably calculated.
https://bugzilla.gnome.org/show_bug.cgi?id=764733
When playing a stream that has been protected by DASH CENC, playback
will fail if a seek is performed. Qtdemux produces the error "stream
is protected using cenc, but no cenc protection system information
has been found" and playback stops.
The problem is that gst_qtdemux_reset() gets called as part of the
FLUSH during a seek. This function frees the protection_system_ids
array. When gst_qtdemux_configure_protected_caps() is called after the
seek has completed, the protection_system_ids array is empty and
qtdemux is unable to create the correct output caps for the protected
stream.
This commit changes it to only free the protection_system_ids on
hard resets.
https://bugzilla.gnome.org/show_bug.cgi?id=761787
qtdemux->streams is an array, it will never evaluate to true when comparing
to NULL. Instead we want to check the number of streams to make sure the
stream is available.
https://bugzilla.gnome.org/show_bug.cgi?id=753614
CID 1358389
The PIFF data is stored in a custom UUID box which is parsed and the
crypto_info of the element is updated accordingly. This allows
downstream decryptors to process and decrypt the protected content.
https://bugzilla.gnome.org/show_bug.cgi?id=753614
If we don't find the index of the sample correctly in src_convert function,
we have to unref about the qtdemux before returning value.
So, I have modify it about instead pass qtdemux as a parameter into
src_convert function.
https://bugzilla.gnome.org/show_bug.cgi?id=763973
Currently, get_duration function always return the TRUE even though
it can't be set duration correctly. So, we need to add the else condition
about the fail case. Also, we already set the GST_CLOCK_TIME_NONE
in this function. So I have modify it which is related code in some
function.
https://bugzilla.gnome.org/show_bug.cgi?id=763968
When upstream is running in bytes in push-mode, qtdemux will
convert seeks from time to bytes and send it upstream. Upstream
element will perform a byte seek and send a byte segment to qtdemux
that will convert it to time and push it downstream.
There is, however, the pending_segment variable that stores a new
segment event to be pushed before the next data. When handling seeks
as mentioned above this variable was being ignored and, if it contained
some segment event, it would override the one resulting from the seek.
This would restore a previous segment and would cause the seek segment
to be discarded downstream.
This patch fixes this issue by unrefing any pending segment as the
seek from upstream should contain the latest one that should be
used, as requested by the application.
https://bugzilla.gnome.org/show_bug.cgi?id=763165
In some cases the stream configuration can fail, for instance if the
stream is protected and no decryptor was found. For those situations
the demuxer shouldn't emit any data on the corresponding source pad of
the stream and bail out.
https://bugzilla.gnome.org/show_bug.cgi?id=762516
When the cenc metadata is stored outside of the moof box and the
stream is exposed it is possible that the cenc metadata hasn't been
processed yet while the first buffer is being pushed. When this
happens the buffer can't possibly be decrypted downstream so don't
push it.
https://bugzilla.gnome.org/show_bug.cgi?id=762516
Commit 7873bede31
(https://bugzilla.gnome.org/show_bug.cgi?id=760774) changed the
behaviour of qtdemux to call gst_qtdemux_configure_stream() for
every new moof.
When playing a protected stream, gst_qtdemux_configure_stream()
calls gst_qtdemux_configure_protected_caps(). The
gst_qtdemux_configure_protected_caps() function takes the original
media format, puts this in a field called "original-media-type"
and then changes the caps to "application/x-cenc".
The gst_qtdemux_configure_protected_caps() did not handle the case
of being called multiple times, causing it to incorrectly set the
caps. The second call was causing the caps to be set to:
application/x-cenc, original-media-type"application/x-cenc"
This commit makes gst_qtdemux_configure_protected_caps() check that
the caps have already been transformed, so that it only gets
changed once.
https://bugzilla.gnome.org/show_bug.cgi?id=761769
qtdemux calculates framerate using duration and the number of sample.
In case of fragmented mp4 format, however, the number of sample can
be figure out after parsing every moof box. Because qtdemux does not
parse every moof in QTDEMUX_STATE_HEADER state, it will cause incorrect
framerate calculation.
This patch will triger gst_qtdemux_configure_stream() for every new moof.
Then, framerate will be calculated by using duration and n_samples of the moof.
https://bugzilla.gnome.org/show_bug.cgi?id=760774
Based on document ISO_IEC_14496-12, edit list box can have
segment duration as zero. It does not imply that media_start equals to
media_stop. But, it just indicates a sample which should be presented
at the first. This patch derives segment duration using media_time
and duration of file. And set derived duration to segment-duration.
https://bugzilla.gnome.org/show_bug.cgi?id=760781
In case of push mode, qtdemux expose streams after got moov box.
We can not guarantee that a moov box has sample data such as sample duration
and the number of sample in stbl box for fragmented format case.
So, if a moov has no sample data, streams will not be exposed until get the first moof.
https://bugzilla.gnome.org/show_bug.cgi?id=760779
Prevents downstream from receiving flushes for a seek only in
upstream. Those seeks are only to start reading from the right
offset when skipping or returning to qt atoms.
https://bugzilla.gnome.org/show_bug.cgi?id=758928
Avoid writing a negative number as a large positive
integer in an edit list when the first_ts is smaller
than the first_dts - which can happen when the first
packet received has a PTS but no DTS.
https://bugzilla.gnome.org/show_bug.cgi?id=759615
When working in push-mode, we attempt to push out everything currently
buffered in the adapter.
This has two pitfalls:
* We could stop earlier (the moment we get a non-ok or non-not-linked)
* We return the last combined flow return, which might be completely
different from the previous combined flow return
When seeking back to restore the mdat position a flush is pushed
through and it resets downstream segment information. Make sure
that after the flush (that does a soft reset) a segment will
be pushed again
Fixes regressions spotted at
https://ci.gstreamer.net/job/GStreamer-master-validate/2100/
10 FourCCs generated with GST_MAKE_FOURCC() in gstqtmux.c and atoms.c
already exist in fourcc.h. Don't duplicate these and use them directly.
Plus moving 6 to fourcc.h, to centralize them all.
This fixes seeking if the first entries in the samples table are negative. The
binary search would always fail on this as the array would not be sorted if
interpreting the negative numbers as huge positive numbers. This caused us to
always output buffers from the beginning after a seek instead of close to the
seek position.
Also add a case to the comparison function for equality.
It would be unusual to have the header segment with an 'edts' atom
indicating gaps at the beginning when handling fragmented streams.
The header usually doesn't contain any timestamping information, this
should come from the playlist/manifest and the segments with media
in those scenarios.
https://bugzilla.gnome.org/show_bug.cgi?id=758171
In push-mode it is hard to support qt segments overall but it is
possible to support when the file isn't heavily edited but just contain
a segment to indicate a gap at the beginning. This also allows properly
timestamping data that has negative DTS in push-mode.
It is relevant to support those for 2 scenarios:
1) fragmented streaming
2) HTTP playback of 'regular' mp4
https://bugzilla.gnome.org/show_bug.cgi?id=753484
If the QtDemuxStream are re-used they may already have caps which used
to be leaked.
Reproduced using the
validate.dash.playback.seek_forward.dash_exMPD_BIP_TC1 validate
scenario.
https://bugzilla.gnome.org/show_bug.cgi?id=756561
Negotiation to audio/x-raw,format=S8 was not possible because S8 does
not have a bit order so we ended up doing `if (!entry.fourcc) goto refuse_caps;`
https://bugzilla.gnome.org/show_bug.cgi?id=756387
If seeking targets an empty segment skip it as there is no media
offset to get from it. Instead look for the next one.
This doesn't make seeking in push-mode work if you seek to an
empty segment but at least won't get you to wrong offsets.
https://bugzilla.gnome.org/show_bug.cgi?id=753484
eceb2ccc73 broke segment seeks by always
accumulating segments manually when activating a segment. This is only
needed when handling edit lists, not when activating a segment because of a
seek. Do the accumulation when switching edit list segments instead.
This fixes segment seeks again, while keeping edit lists playback working.
https://bugzilla.gnome.org/show_bug.cgi?id=755471
Commit 7d7e54ce68 added support for
DASH common encryption, however commit
bb336840c0 that went onto master
shortly before the CENC commit caused the calculation of the CENC
aux info offset to be incorrect.
The base_offset was being added if present, but if the base_offset
is relative to the start of the moof, the offset was being added twice.
The correct approach is to calculate the offset from the start of the
moof and use that offset when parsing the CENC aux info.
This commit adds support for ISOBMFF Common Encryption (cenc), as
defined in ISO/IEC 23001-7. It uses a GstProtection event to
pass the contents of PSSH boxes to downstream decryptor elements
and attached GstProtectionMeta to each sample.
https://bugzilla.gnome.org/show_bug.cgi?id=705991
When a new time segment is received upstream is going to restart
with a new atom. Make the neededbytes and todrop variables
reflect that to avoid waiting too much or dropping the
initial bytes that contain the header.
The adapter might have data remaining from the previous segment,
push it all before clearing the adapter and starting a new segment.
It can accumulate data if it had pushed and got not-linked, returning
immediately without processing all the data. Before starting a new
segment this data should be handled.
Avoids accumulating all samples from a fragmented stream that could
lead to a 'index-too-big' error once it goes over 50MB of data. It
could reach that before 2h of playback so it doesn't take that long.
As upstream elements are providing data in time format they should
be the ones that have more information about the full media index
and should be able to seek if possible.
upstream_newsegment isn't really clear on what it means, it is set
to TRUE when the upstream element sends a segment in TIME format, so
rename it to be more clear about it.
It is important to know this because it means that upstream has
a notion of time and qtdemux is likely being driven by an upstream
element that is reading from a higher level abstraction than a file,
such as a DASH, MSS or DLNA element.
In fragmented streaming, multiple moov/moof will be parsed and their
previously stored samples array might leak when new values are parsed.
The parse_trak and callees won't free the previously stored values
before parsing the new ones.
In step-by-step, this is what happens:
1) initial moov is parsed, traks as well, streams are created. The
trak doesn't contain samples because they are in the moof's trun
boxes. n_samples is set to 0 while parsing the trak and the samples
array is still NULL.
2) moofs are parsed, and their trun boxes will increase n_samples and
create/extend the samples array
3) At some point a new moov might be sent (bitrate switching, for example)
and parsing the trak will overwrite n_samples with the values from
this trak. If the n_samples is set to 0 qtdemux will assume that
the samples array is NULL and will leak it when a new one is
created for the subsequent moofs.
This patch makes qtdemux properly free previous sample data before
creating new ones and adds an assert to catch future occurrences of
this issue when the code changes.
Most files don't contain the values for transposing the coordinates
back to the positive quadrant so qtdemux was ignoring the rotation
tag. To be able to properly handle those files qtdemux will also ignore
the transposing values to only detect the rotation using the values
abde from the transformation matrix:
[a b c]
[d e f]
[g h i]
https://bugzilla.gnome.org/show_bug.cgi?id=738681
The media start has nothing to do with the shift we have applied
but with the value of the first PTS. This is defined as:
Dt(0) = 0
Ct(0) = Dt(0) + CTTS(0)
So the media start is always the first CTTS.
https://bugzilla.gnome.org/show_bug.cgi?id=751361
Allows playing edts editted files with proper synchronization of
streams. This patch fixes the regression introduced by
bf95f93c01 that was added to fix
segment seeks handling.
Having the accumulated_base separated from the main segment.base
allows handling both segment seeks and edts editted files.
https://bugzilla.gnome.org/show_bug.cgi?id=751361
Buffers need not to start at running-time 0 so the last_dts needs
to be the value of the first buffer's dts as it is used to compute
the duration of the buffers. If it was left at 0 the first buffer
would have a larger duration when it shouldn't
https://bugzilla.gnome.org/show_bug.cgi?id=751361
Move the multiview caps calculations to the configure_stream()
function, so the rest of the video info is available, and
use the gst_video_multiview_guess_half_aspect() function to
determine if the half-aspect flag should be set on frame-packed
video.
The cslg atom provide information about the DTS shift. This is
needed in recent version of ctts atom where the offset can be
negative. When cslg is missing, we parse the CTTS table as proposed
in the spec to calculate these values.
In this implementation, we only need to know the shift. As GStreamer
cannot transport negative timestamps, we shift the timestamps forward
using that value and adapt the segment to compensate. This patch also
removes bogus offset of ctts_soffset, this offset shall be included
in the edit list.
https://bugzilla.gnome.org/show_bug.cgi?id=751103
We shift DTS forward to avoid negative timestamps which cannot be
represented with version 0 of the CTTS table. To stick with that
version (backward compatibility), the spec recommend using an
edit list entry to move back the presentation time to where it
should be.
https://bugzilla.gnome.org/show_bug.cgi?id=751242
In presence of a CTTS, the segment start/stop must be offset so
the segment start/stop include the PTS. This is needed since the
PTS cannot be negative in this format. This fixes issues where the
running time of the first buffer isn't at the start.
https://bugzilla.gnome.org/show_bug.cgi?id=740575
Remove a custom specialized version of gst_buffer_new_wrapped by
using gst_buffer_new_wrapped_full inside a macro to simplify
parameters and give it a more meaningful name.
It is only used to create temporary buffers to have its data copied.
Adds AC-3 muxing support. It is defined for mp4 and 3gp formats.
One extra feature that was added was the ability to add extension
atoms after set_caps as the AC-3 extension atom needs some data
that has to be extracted from the stream itself and is not
present on caps.
The MPEG-A format provides an extension to the ISO base media
file format to store stereoscopic content encoded with different
codecs like H.264 and MPEG-4:2. The stereo video media information(svmi)
atom declares the presence and storage method for the video.
Stereo video information for MPEG-A can also be supplied through
the 'stvi' atom (ref: ISO/IEC_14496-12, ISO/IEC_23000-11), which
is not implemented in this patch.
Also missing is support for stereo video encoded as separate video tracks
for now.
Based on a patch by Sreerenj Balachandran <sreerenj.balachandran@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=611157
When performing seek, segment->start is being updated with desired_offset,
but in case of reverse playback segment->start should be 0 and
segment->stop should be updated with desired offset.
https://bugzilla.gnome.org/show_bug.cgi?id=750675
Only update the moov header into the caps if it's the finalised
moov at EOS time. Avoids posting a bogus moov at startup and
repeated updates in robust-recording mode
Implement a robust recording mode, where the output
file is always in a playable state, seeking and rewriting
the moov header at a configurable interval. Rewriting
moov is done using reserved space at the start of
the file, and a ping-pong strategy where the moov
is replaced atomically so it's never invalid.
Track when tags have actually changed, and don't write them into
the moov unless they've changed. Clear any existing tags when
re-writing them, so we can do progressive moov updating in robust
recording mode.
Write placeholder mdat as a free atom plus a 32-bit mdat
with '0' size, which means "rest of the file" in the spec.
Re-write it later to a full 64-bit extended size atom if needed.
Correctly update any edit lists each time the moov is recalculated,
updating existing table entries if they already exist instead of just
adding new ones.
qtdemux creates a samples array and gets the timestamps for buffers by
accumulating their durations. When doing reverse playback of fragments,
accumulating samples will lead to wrong timestamps as the timestamps
should go decreasing from fragment to fragment and the accumulation
will produce wrong results.
In this case, when receiving a discont for fragmented reverse playback,
the previous samples information should be flushed before new data
is processed.
The gst-launch script for example launch line to test qtdemux is
missing a queue before the decodebins, otherwise the gst-launch-1.0
command won't work.
https://bugzilla.gnome.org/show_bug.cgi?id=749054
When doing key uint seek, qtdemux calls gst_qtdemux_adjust_seek
to get proper offset. And then this offset is set to
segment.position and segment.time in gst_qtdemux_perform_seek but
segment.start is not updated.
After that, application sends segment query,
qtdemux sets start and stop to query using gst_segment_to_stream_time. Due
to the wrong value in segment.start, the stop position is smaller than
it should.
https://bugzilla.gnome.org/show_bug.cgi?id=746822
We always write the CTTS in qtmux. Ideally we only want to do that
for streams that need DTS, it should be present on the track information
rather than be decided based on each buffer
As qt uses durations, it doesn't matter, only the difference
between consecutive buffers is important. Also, collectpads
already replaces PTS/DTS with the running times for them.
Instead of checking various state variables around the muxer,
track the current muxing mode in a single 'mux_mode' enum.
Add some implementation notes about the different mux modes
gst_segment_do_seek() does that for us already, and doing it twice
will break non-flushing seeks in interesting ways. Leftover from 1.0
porting.
Also copy over segment offset and applied_rate, just in case.
When not in fast-start or fragmented mode, we need to be able
to rewrite the size of the mdat atom, or else the output just
won't be playable - the mdat placeholder with size == 0 will
cover the rest of the file, including any moov atom we write out.
https://bugzilla.gnome.org/show_bug.cgi?id=708808
Unlike many other seek flags, the KEY_UNIT seek
flag is not copied over into the GstSegment,
since it's only relevant for the seek itself,
so we need to pass it explicitly to the seek
handler here.
https://bugzilla.gnome.org/show_bug.cgi?id=745339
We need different symbol names, because these symbols are also present
in the fragmented plugin ... which will cause conflicts when doing
static linking
Using the sparse streams can make the push-based seeking return
too far in the stream. It also can lead to issues as the
sparse streams will be ignored when restarting playback and,
if the sparse stream is the one that has the earliest sample,
it will confuse qtdemux's offsets as one stream will have
an earlier offset than the demuxer's one which might lead to
early EOS.
https://bugzilla.gnome.org/show_bug.cgi?id=742661
Parse the 'sidx' atom and update the total duration according to the
parser result. The isoff parser code is imported from
gst-plugins-bad's dashdemux and a gst_isoff_sidx_parser_add_data()
function was factored out of the gst_isoff_sidx_parser_add_buffer()
function.
https://bugzilla.gnome.org/show_bug.cgi?id=743578
Keep global and stream tags separately and parse the udta node
that can be found under the trak atom. The udta will contain
stream specific tags and will be pushed as such
https://bugzilla.gnome.org/show_bug.cgi?id=692473
Tags received via events, when marked as stream tags, will
be stored on that stream's trak atom instead of being stored
in the main tags atom. This allows the resulting file to have
global and stream tags stored.
https://bugzilla.gnome.org/show_bug.cgi?id=692473
Refactor the functions that were bound to the 'moov' atom to
directly pass the desired 'udta' that should receive the tags.
This allows the tags to be written to 'udta' at the 'moov' or
the 'trak' level, creating tags that are for the container or
for a stream only.
https://bugzilla.gnome.org/show_bug.cgi?id=692473
For fragmented streams with extra data at the end of the mdat
qtdemux was not dropping those bytes and would try to use
that extra data as the beginning of a new atom, causing the
stream to fail.
https://bugzilla.gnome.org/show_bug.cgi?id=743407
