Original commit message from CVS:
* gst/gstbin.c: (gst_bin_get_type), (gst_bin_element_set_state):
Prepare for release where we warn against possible app breakage in the
case of live pipelines along with an env var to enable/disable live
preroll mode (GST_COMPAT=[no-]live-preroll).
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/gstelement.c: (gst_element_sync_state_with_parent):
Look at the pending state too when syncing the element state to the
parent. Fixes#420133.
Original commit message from CVS:
Patch by: Evan Nemerson <evan at coeus dash group dot com>
* gst/gstelement.c: (gst_element_class_init):
Fix pad-added and pad-removed signal signatures so that the pad type is
stated as GST_TYPE_PAD instead of G_TYPE_OBJECT. Fixes#419851.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add new element field and method.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_change_state_func),
(gst_bin_continue_func), (bin_bus_handler),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
Make async state changes a bit smarter by using new ASYNC_START and
ASYNC_DONE messages. This reduces the number of times we run the state
recalculation thread.
Don't change state of element with a pending ASYNC_START message.
Deprecate STATE_DIRTY messages.
* gst/gstelement.c: (gst_element_init), (gst_element_send_event),
(gst_element_get_state_func), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_set_state_func),
(gst_element_change_state):
* gst/gstelement.h:
Keep the state that was last set by the app in a new element field.
Don't allow state changes when handling an element event.
Post ASYNC_START and ASYNC_DONE messages.
Change lost_state so that we go to PAUSED and wait for the parent to set
us to PLAYING again (so latency calculation can be performed)
Export gst_element_change_state() method so that subclasses can use it.
API: gst_element_change_state()
API: GST_STATE_TARGET
* gst/gstpipeline.c: (gst_pipeline_class_init),
(reset_stream_time), (gst_pipeline_change_state),
(gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time):
Using the new ASYNC_START message we can reset the base_time when
needed. This can then be used to implement base_time redistribution in
flushing seeks so that we can remove the explicit seek handling.
Perform latency query and configuration when going to PLAYING.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query), (gst_base_sink_change_state):
Post new ASYNC_START/ASYNC_DONE messages.
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix test because the bin will not set the async element to PLAYING right
away.
* tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST):
Make the message check a little stronger.
Handle ASYNC messages.
* tests/check/pipelines/cleanup.c: (GST_START_TEST):
* tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST):
Expect ASYNC_DONE messages.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstmessage.c: (gst_message_new_async_start),
(gst_message_new_async_done), (gst_message_parse_info),
(gst_message_parse_async_start):
* gst/gstmessage.h:
Add ASYNC_START and ASYNC_DONE messages to prepare for latency
support.
Original commit message from CVS:
* gst/gstchildproxy.c: (gst_child_proxy_get_property),
(gst_child_proxy_set_property):
Invert precondition check to be alike the ones in the mimiced gobject
api.
Original commit message from CVS:
* docs/design/draft-tagreading.txt:
* docs/random/ensonic/audiobaseclasses.txt:
Do some Architect work.
* gst/gstobject.c: (gst_object_set_name):
Add a WARNING.
* gst/gstpad.c:
Add docs that point from gst_pad_get_range to gst_pad_pull_range
Original commit message from CVS:
* gst/gstsystemclock.c: (gst_system_clock_init),
(gst_system_clock_start_async), (gst_system_clock_id_wait_async):
Defer starting the async system clock thread until the first async
wait is scheduled. Fixes#414986.
Original commit message from CVS:
* gst/gstbin.c:(gst_bin_add):
Use GST_STR_NULL to prevent NULL pointer to be passed to GST_CAT_DEBUG.
* win32/common/libgstbase.def:
* win32/common/libgstreamer.def:
Add new exported functions.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_dispose):
There's no need to warn if VOID_PENDING is not NONE here, as
long as the state is NULL it's ok, and that's checked immediately
above.
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_transform_object_string),
(_gst_value_initialize):
Implement GstObject -> string transform so we print object names
when serializing GValues containing GstObjects.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_message_full),
(gst_element_set_locked_state), (gst_element_get_state_func),
(gst_element_change_state):
Handle INFO messages from the GST_ELEMENT_INFO macro as well.
Documentation updates.
Small code cleanups.
* gst/gstmessage.c: (gst_message_new_info),
(gst_message_parse_info):
* gst/gstmessage.h:
API: gst_message_new_info()
API: gst_message_parse_info()
Add INFO message create and parse code.
Original commit message from CVS:
* gst/gstbin.c: (bin_query_min_max_init), (bin_query_latency_fold),
(bin_query_latency_done):
Also report the live parameter of a latency query.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstbus.c: (gst_bus_init), (gst_bus_dispose), (gst_bus_post),
(gst_bus_timed_pop), (gst_bus_pop):
* gst/gstbus.h:
API: gst_bus_timed_pop()
Implement gst_bus_timed_pop() to do a blocking timed wait for a
message to arrive on the bus.
* tests/check/gst/gstbus.c: (GST_START_TEST), (pop_thread),
(gst_bus_suite):
Two unit tests for new _timed_pop() function.
Original commit message from CVS:
* gst/gstpipeline.c: (gst_pipeline_change_state),
(gst_pipeline_provide_clock_func), (gst_pipeline_set_delay):
Don't ref a NULL clock in _provide_clock_func().
Don't allow an INVALID delay.
Don't try to calculate base_time with an invalid start_time.
Also distribute and notify a NULL clock when it was selected.
* tools/gst-launch.c: (event_loop):
Don't crash when a NULL clock was selected in the pipeline.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstelement.h:
Fix up documentation to link to the correct GstGError section.
Add GST_ELEMENT_INFO macro since someone else added a Info message.
Original commit message from CVS:
* docs/design/part-gstghostpad.txt:
* gst/gstghostpad.c: (gst_ghost_pad_dispose),
(gst_ghost_pad_new_full):
Make the ghostpad a parent of the internal pad again for better backward
compatibility. Don't write code that relies on this however.
* gst/gstpad.c: (gst_pad_activate_pull), (gst_pad_activate_push),
(gst_pad_link_check_hierarchy):
Require that parents should be GstElements in the hierarchy check.
Original commit message from CVS:
* docs/design/part-gstghostpad.txt:
* gst/gstghostpad.c: (gst_ghost_pad_class_init),
(gst_ghost_pad_internal_do_activate_push),
(gst_ghost_pad_internal_do_activate_pull),
(gst_ghost_pad_do_activate_push), (gst_ghost_pad_do_activate_pull),
(gst_ghost_pad_do_link), (gst_ghost_pad_dispose),
(gst_ghost_pad_new_full), (gst_ghost_pad_set_target):
Do not set the internal pad as a parent anymore so we can avoid
hierarchy linking errors when the ghostpad has no parent yet. This also
fixes failed activation because of unlinked internal pads, which in
turn fixes the impossible case where you have to activate a pad before
you can add it to a running element.
Also fix the docs.
* gst/gstpad.c: (pre_activate), (post_activate),
(gst_pad_set_active), (gst_pad_activate_pull),
(gst_pad_activate_push), (gst_pad_check_pull_range):
Add some more debug info.
Mark activation mode in pre_activate so that we don't try to activate in
endless loops. Fixes#385084.
Original commit message from CVS:
* gst/gstchildproxy.h:
* libs/gst/base/gstbasesink.h:
* libs/gst/base/gstbasesrc.h:
* libs/gst/base/gstbasetransform.h:
More docs coverage and some ChangeLog surgery (add missing names)
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_get_internal_links_default),
(gst_pad_dispatcher):
Improve debugging of default pad dispatcher and query functions.
Original commit message from CVS:
* docs/design/part-seeking.txt:
Some small update.
* gst/gstsegment.c: (gst_segment_set_seek):
Revert old bogus change that should make seeking work again.
Original commit message from CVS:
* docs/design/draft-klass.txt:
Add existing category analysis.
* gst/gstcaps.c:
Fix doc example, framerate is a fraction.
Original commit message from CVS:
* gst/gstbin.h:(gst_bin_get_by_interface),
(gst_bin_iterate_all_by_interface):
Replace interface parameter name by iface as interface is
a reserved keyword in Visual Studio for C++ projects so it removes
a build error for application developpers using VS.
* plugins/elements/gstfilesrc.c:(gst_file_src_uri_set_uri):
Fix a bug on Windows in uri format check. Now the prefix checked
is file:// and next we check if the path after file:// is absolute.
* win32/common/libgstbase.def:
* win32/common/libgstdataprotocol.def:
* win32/common/libgstgstreamer.def:
Add new exported functions.
Original commit message from CVS:
2007-02-09 Andy Wingo <wingo@pobox.com>
* gst/gstregistryxml.c (load_feature, load_plugin): Drop some
normal-case logs down to LOG, raise errors to WARNING.
(gst_registry_xml_read_cache): Don't log before calling a function
that logs.
* gst/gstregistry.c (gst_registry_finalize): Less debug on program
exit (registry finalize).
(gst_registry_add_plugin, gst_registry_add_feature): No need for a
DEBUG log when we emit signals that people don't even have the
chance to connect to.
(gst_registry_scan_path_level): Less logging in the normal case.
Original commit message from CVS:
* gst/gstelementfactory.h:
The klass string is not a hierarchy. Add reference to the design doc
for more information and common types.
Original commit message from CVS:
* docs/gst/gstreamer.types.in:
* gst/gstregistry.c: (gst_registry_class_init):
Document registry signals and make gtk-doc pick them up (#401381).
Original commit message from CVS:
* gst/gstcaps.c: (_gst_caps_free), (gst_static_caps_get):
Add some refcount debugging.
Make gst_static_caps_get threadsafe, which is needed when autoplugging
in multiple streaming threads.
Original commit message from CVS:
* gst/gstregistrybinary.c: (gst_registry_binary_read_cache):
In print statements, "%x" is for guint. Fixes build on macosx.
Original commit message from CVS:
* gst/gst.c: (gst_init_get_option_group):
Make warning about late g_thread_init() calls a bit more explicit,
so that it's more obvious to application developers what they need
to do if a user files a bug against their application.
Original commit message from CVS:
* gst/gsttaglist.h:
* gst/gsttagsetter.c:
Add more docs regarding tag merge-modes and when to send tags. Fix 'since'
statement for new tag.
Original commit message from CVS:
* gst/gsttaglist.c: (_gst_tag_initialize):
Change tag type from STRING to DOUBLE. Apply ChangeLog surgery for my
previous two entries.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gsttaglist.c: (_gst_tag_initialize):
* gst/gsttaglist.h:
add tag support for beat-per-minute
Original commit message from CVS:
2007-01-13 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_get_range, gst_pad_pull_range): Allow
getrange() to return buffers with other caps, while we fix
demuxers and typefind, or otherwise change part-negotiation.txt.
