h264 log messages were logged in default category because a regression
in code. This patch renable the usage of vaapi logging category.
This regression was introduced in commit 7c365bdd.
This patch chains up failure to executing the modification process. The
end result is that we now fail decoding the slice if this process fails.
This avoid sending a corrupted state to the accelerator. In some special
cases, this could lead to unrecoverable errors.
https://bugzilla.gnome.org/show_bug.cgi?id=796832
gst_adapter_masked_scan_uint32_peek() asserts if size is 0. Don't
try and scan in that case. This fixes assertion that would some times
happen when the stream is corrupted.
https://bugzilla.gnome.org/show_bug.cgi?id=796832
This change is due a problem encoding JPEGs with Intel's
media-driver: green/black image when playback jpeg
This patch sets component identifier and quantization table
destination selector in frame header to support packing headers
by Intel's media-driver that does not accept packed header
in AP level.
https://bugzilla.gnome.org/show_bug.cgi?id=796705
The decoder was trying to detect earlier that a field was lost base
on guessing the parity order. This breaks in streams were the parity
order changes.
This patch reverts the field order prediction code added by commit
8dd93e9c8.
https://bugzilla.gnome.org/show_bug.cgi?id=796169
This ensure that we always have sentinels set in the reference
pictures arrays. The code wasn't unsafe, this simply improve the
tracing, so instead of printing 32 lines of zeros, va tracer
prints proper empty lists.
https://bugzilla.gnome.org/show_bug.cgi?id=796169
Gobjectification for GstVaapiDisplay was almost done by the commit 185da3d1.
But still something breaking GObject code convention remains, which is
calling gst_vaapi_display_new() in each decendants.
This patch replaces it with gst_vaapi_display_config(), defined in private
header.
https://bugzilla.gnome.org/show_bug.cgi?id=796470
The function name was gst_vaapi_display_create_unlocked(), nonetheless
it wasn't called unlocked. In order to keep the semantics this patch
renames the gst_vaapi_display_create_unlocked() as
gst_vaapi_display_create(), removing the previous function
gst_vaapi_display_create().
https://bugzilla.gnome.org/show_bug.cgi?id=796470
This is, practically, a revert of commit dcf135e2.
The parent logic is useful for the EGL display, which is a decorator
of the real windowing subsystem (X11 or Wayland). Thus it is avoided
calling vaInitialize() and vaTerminate() twice.
https://bugzilla.gnome.org/show_bug.cgi?id=795391
gst_vaapi_display_egl_new_with_native_display() has been broken since
it wasn't used.
Currently it's needed to call this API to create a display providing
the EGL display, so it could avoid duplicated calls to the native
display (eg. eglTerminate).
Signed-off-by: Victor Jaquez <vjaquez@igalia.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795391
This change is due a problem decoding JPEGs with Intel's media-driver:
no image was generated.
This patch relases the VA buffers after vaEndPicture() is called,
and not before (after vaRenderPicture()).
https://bugzilla.gnome.org/show_bug.cgi?id=796505
The specification says,
"log2_max_pic_order_cnt_lsb_minus4 shall be in the range of 0 to 12, inclusive."
This patch changes the upper limit from 6 to 12.
https://bugzilla.gnome.org/show_bug.cgi?id=796179
This removes hard-coded checks on the parent subsystem of potential DRM
devices. These checks were set to exlude devices that do not originate
from the PCI bus, which is only a valid approach on x86 devices.
Other devices may have a DRM device originating from the platform
subsystem, so the checks that were previously restricted to PCI are
extended to cover platform devices as well.
https://bugzilla.gnome.org/show_bug.cgi?id=794840
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Otherwise the following poll may not return for an arbitrary amount of
time. This can happen if another wayland event queue has flushed and read
our events.
https://bugzilla.gnome.org/show_bug.cgi?id=795224
pic_width_in_luma_samples/pic_height_in_luma_samples can be 16-bit rounded
instead of 32-bit.
In addition, codedbuf_size must be calculated according to this change.
https://bugzilla.gnome.org/show_bug.cgi?id=753229
Even if it is the h264parse fault or bad video file, vaapih264dec
should set a proper value for VAPictureParameterBufferH264.num_ref_frames
as the driver might use it.
Also see "info.ref_frames = dpb_size;" in
gstvaapidecoder_h264.c::ensure_context
https://bugzilla.gnome.org/show_bug.cgi?id=793836
Check input buffers for ROI metas and pass them to VA. Also added a
new "default-roi-delta-qp" property in order to tell the encoder what
delta QP should be applied to ROI by default.
Enabled it for H264 and H265 encoders.
https://bugzilla.gnome.org/show_bug.cgi?id=768248
According to Debian package auto-building, uintptr_t is not an
unsigned long in i386 arch, raising an "incompatible pointer type"
error.
This patch adds a casting for compiler's satisfaction in i386.
Increased max values of periodic key frame for h26x codecs.
This allow more fine tunning of encoder that in certian scenario
want higher periodic key frame.
For example: it doesn't want a key frame each 10 seconds but
each 120 seconds.
https://bugzilla.gnome.org/show_bug.cgi?id=786320
eglGetDisplay() is currently broken in Mesa for Wayland. Also using
eglGetDisplay() is rather fragile, and it is recommended to use
eglGetPlatformDisplay() when possible.
In order to do that, this patch uses the helper in GstGL. If
gstreamer-vaapi is not compiled with GstGL support, eglGetDisplay()
will be used.
https://bugzilla.gnome.org/show_bug.cgi?id=790493
Frames are encoded as different layers. Frame in a particular
layer will use pictures in lower or same layer as references.
Which means decoder can drop the frames in upper layer but still
decode lower layer frames.
B-frames, except the one in top most layer, are reference frames.
All the base layer frames are I or P.
eg: with 3 temporal layers
T3: B1 B3 B5 B7
T2: B2 B6
T1: I0 P4 P8
T1, T2, T3: Temporal Layers
P1...Pn: P-Frames:
B1...Bn: B-frames:
T1: I0->P4 , P4->P8 etc..
T2: I0--> B2 <-- P4
T3: I0--> B1 <-- B2, B2 --> B3 <-- P4
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=788918
Frames are encoded as different layers. A frame in a particular
layer will use pictures in lower or same layer as references.
Which means decoder can drop the frames in upper layer but still
decode lower layer frames.
eg: with 3 temporal layers
T3: P1 P3 P5 P7
T2: P2 P6
T1: P0 P4 P8
T1, T2, T3: Temporal Layers
P1...pn: P-Frames:
P0->P1 , P0->P2, P2->P3, P0->P4......repeat
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=788918
The frame_num generation was not correctly implemented.
According to h264 spec, frame_num should get incremented
for each frame if previous frame is a referece frame.
For eg: IPBPB sequece should have the frame numbers 0,1,2,2,3
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=788918
Adds new property "prediction-type" to select different reference
picture selection modes like hierarchical-p, hierarchical-b etc.
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=788918
Adds some basic building blocks to ease the implementation
of hierarchical prediction modes.
-- add an utility method to find temporal level of each frame
-- define max_ref_frame count based on temporal level count
-- add temporal_level_div[] for finding temporal level each frame
to be encoded.
-- find ip_period based on temporal level count
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=788918
Adds new property "temporal-levels" to select the number of
temporal levels to be included in the encoded stream.
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=788918
We can have p-frame as non-ref and also b-frame as ref
which are not supported yet. Reference flag
is the first machinery needed for more advanced
reference picture selection modes.
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=788918
Adds a new function that changes the internal EGL display to the
current one (eglGetCurrentDisplay()) and sets the current context
too (eglGetCurrentContext()).
This new function is called by gst_vaapi_texture_egl_create() updating
the GstVaapiDisplayEGL with the current EGL display.
https://bugzilla.gnome.org/show_bug.cgi?id=773453
