This new signal allows data-channel consumers to configure signal handlers on a
newly created data-channel, before any data or state change has been notified.
The webrtcin unit-tests were refactored to make use of this new signal.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2427>
In preparation for the new element `GstGtkWaylandSink`, move reusable
parts out of `GstWaylandSink` into the already exisiting but very
barebone library.
Notable changes include:
- the `GstWaylandVideo` interface was dropped
- support for `wl-shell` was dropped
- lots of renaming in order to match established naming patterns
- lots of code modernisations, reducing boilerplate
- members were made private wherever possible
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2479>
1) check for right macro name when checking for NICE_VERSION_CHECK
2) if libnice version is 0.1.18.1 this should not satisfy
a NICE_VERSION_CHECK(0,1,19).
Fixes build with libnice 0.1.18.1 subproject checkout.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2499>
WHen bundling, if multiple medias are used with the same media payload, then
each of the fec/rtx/red additions would add a distinct payload. This could
very easily overflow the available payload space.
Instead, track the relationship between the media payload value and
the relevant fec/rtx/red payload values and reuse them whenever
necessary, even when bundling.
e.g.
...
a=group:BUNDLE video0 video1
m=video 9 UDP/SAVPF 96 97
a=mid:video0
a=rtpmap:96 VP8/90000
a=rtpmap:97 rtx/90000
a=fmtp:97 apt=96
...
m=video 9 UDP/SAVPF 96 97
a=mid:video1
a=rtpmap:96 VP8/90000
a=rtpmap:97 rtx/90000
a=fmtp:97 apt=96
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2474>
Since both g_value_set_object() and g_weak_ref_get() takes a reference
there will be two new references to the GstWebRTCICE object when there
should be only one. g_value_take_object() has the same functionality as
g_value_set_object() but does not take a reference.
Without this change, the GstWebRTCICE object will be leaked.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2333>
GLib guarantees libintl is always present, using proxy-libintl as
last resort. There is no need to mock gettex API any more.
This fix static build on Windows because G_INTL_STATIC_COMPILATION must
be defined before including libintl.h, and glib does it for us as part
as including glib.h.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>
- Limit the max bit rate and target bitrate to 100,000 kbps
- Remove frame_rate from API. Inside library frame_rate is always in Q16 format
- Fix the seg fault with 2 PASS and max bit rate
- Remove frame_rate from CI and gstreamer
They are part of gst_dep already and we have to make sure to always have
gst_dep. The order in dependencies matters, because it is also the order
in which Meson will set -I args. We want gstreamer's config.h to take
precedence over glib's private config.h when it's a subproject.
While at it, remove useless fallback args for gmodule/gio dependencies,
only gstreamer core needs it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2031>
g_signal_disconnect*() doesn't stop any existing callbacks from running
which means that if the notify::state callback is in progress in one
thread and the data channel object is finalize()ed in another thread,
then there could be a use-after-free trying lock the data channel
object.
We can't reasonably use a GWeakRef as we don't have a 'parent' object to
free the GWeakRef after the data channel is finalized. This is also
complicated by the fact that the application can hold a reference to the
data channel object that would live beyond the lifetime of webrtcbin
itself.
We solve this by implementing a ghetto weak-ref solution internally with
a list of outstanding data channels.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>
Input (sink pads) is the already-ssrc-muxed stream with the relevant rtp
sdes header extensions already applied:
- mid
- stream-id
- repaired-stream-id
Output (src pads) have the pads separated into individual ssrc's as
that's what rtpbin gives us.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>
Each rtpbin exposed recv_src pad is now exposed as webrtcbin src_%u pad
now with no meaining applied to the value of %u. Previously this used
to mean the mline in the SDP. If this is is still required, then the
transceiver can be retrieved from the pad and the "mlineindex" property
from the transciever. The "mid" is also retrievable from the
transceiver.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>
Specify modules to look for OpenEXR when CMake is used, as we may have
CMake config files instead of pkg-config files that result from building
OpenEXR, which may be built with CMake which is typically the case on Visual
Studio builds.
In this case, Meson does seem to find the 'OpenEXR' package with CMake
after trying pkg-config, but does not consider it enough without the
'modules:' argument.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2014>
This reverts commit 3cad3455377d5a22faa138d9df840257059776c8.
That commit was breaking the association between an audio and
a video track in the standard case.
In practice, to support carrying separate MediaStream, we are
going a way to map what MediaStreamTrack belong to what MediaStream,
but that will require some thinking about the API.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2023>
From https://datatracker.ietf.org/doc/html/draft-ietf-mmusic-msid-16:
> Multiple media descriptions with the same value for msid-id and
> msid-appdata are not permitted.
Our previous implementation of simply using the CNAME as the msid
identifier and the name of the transceiver as the msid appdata was
misguided and incorrect, and created issues when bundling multiple
video streams together: the ontrack event was emitted with the same
streams for the two bundled medias, at least in Firefox.
Instead, use the transceiver name as the identifier, and expose
a msid-appdata property on transceivers to allow for further
customization by the application. When the property is not set,
msid-appdata can be left empty as it is specified as optional.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2003>
WebKit is not going to render anything until a URI is set, leading to a
WPE posting a `WPE View did not render a buffer` error message. To avoid
requiring the user to know it if they only want to use
`wpesrc::load-bytes` we can just use `about:blank` as default and
everything will work as users would expect.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1492>
Dispatches a list of active touch events to the wpe view on each
received TOUCH_FRAME event. Touch inputs currently only move the cursor,
since wpe doesn't seem to support clicking/scrolling or zooming with
touch input.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>
We bind transceivers' fec_percentage property to the FEC encoder
percentage property, and with the binding bidirectional a deadlock
was introduced by the latest changes from !1762:
We take hold of the transceiver's object lock, then add the binding
and set the property to its initial value on the encoder, which causes
set_property to deadlock in the transceiver when the binding kicks in.
Changing the binding type to DEFAULT (source to target) is enough
to address the deadlock and still serves the original intent.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1967>
We need to always add the RTX/RED/ULPFEC elements as rtpbin will only
call us once to request aux/fec senders/receivers.
We also need to regenerate the media section of the SDP instead of
blindly copying from the previous offer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1762>
Remove the symbolic link `gst-uninstalled` which points to `gst-env`.
The `uninstalled` is the old name and the project should stick to a
single name for the procedure.
Remove the term from all the files, exceptions are variables from
dependencies like `uninstalled_variables` from pkgconfig and
`meson-uninstalled`.
Adjust mentions of the script in the documentation and README.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1743>
If present, add '-lsocket' and '-lnsl' to network_deps.
ext/curl/meson.build: add network_deps to dependencies
gst/festival/meson.build: same
sys/shm/meson.build: same
Fixes linking issues on Illumos distros.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1525>
If the `area_surface` got unmapped when changing to the `READY` or
`NULL` state, we currently don't remap it when playback resumes and
`wp_viewporter` is supported. Without `wp_viewporter` we do remap
it, but rather unintentionally and also when not wanted.
On Weston this has not been a big problem as it so far wrongly maps
subsurfaces of unmapped surfaces anyway - i.e. only the black
background was missing on resume. On other compositors and future
Weston this prevents the `video_surface` to get remapped.
Shuffle things around to ensure `area_surface` is mapped in the
right situations and do some minor cleanup.
See also https://gitlab.freedesktop.org/wayland/weston/-/issues/426
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1483>
The later, doing damage in surface coordinates instead of buffer
coordinates, has been deprecated. The reason for that is that it
is more prone to bugs, both on the client and the compositor side,
especially when paired with buffer scale, `wp_viewporter` or
buffer transforms.
Unfortunately, on Weston this risks running into
https://gitlab.freedesktop.org/wayland/weston/-/issues/446
(which causes trouble for several other projects as well). However,
that bug only affects cases where we run in sync mode, i.e. only
during resizes. In practise I haven't been able to observe the
issue.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1446>
Each time we call `wl_surface_damage()` we want to do full surface
damage. Like Mesa, just use `G_MAXINT32` to ensure we always do
full damage, reducing the need to track the right dimensions.
`window->video_rectangle` is now unused, but we keep it around for
now as we may need it again in the future.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1446>
From the spec:
> This request is used to describe the regions where the pending
> buffer is different from the current surface contents
We currently also call `wl_surface_damage()` on surfaces without
new or still compositor-hold buffers, e.g. when resizing the window.
In that case we call it on `area_surface_wrapper`, even though it
gets resized via `wp_viewport_set_destination()`, in which case
the compositor is in charge of repainting the area on screen.
Doing so is currently not forbidden by the spec, however it might
be in the future, see
https://gitlab.freedesktop.org/wayland/wayland/-/issues/267
Thus lets stay close to the spec and only call `wl_surface_damage()`
when we just attached a buffer.
Right now this prevents runtime assertions in Mutter.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1446>
`gst_wl_window_set_opaque` does not get called on window resizes,
potentially leaving opaque regions too small.
According to the spec opaque regions can be bigger than the surface
size - parts that fall outside of the surface will get ignored.
Thus we can can simply use `G_MAXINT32` and be sure that the whole
surfaces will always be covered.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1446>
The previous code was mistakenly trying to compute a cc_type out
of the first byte in the byte triplet, whereas it is to be interpreted
as:
> Bit b7 of the LINE value is the field number (0 for field 2; 1 for field 1).
> Bits b6 and b5 are 0. Bits b4-b0 form a 5-bit unsigned integer which
> represents the offset
The same mistake was made when creating padding packets.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1496>
Also does the renaming for the API and the config file option along
with changing the option to a EbBool
Signed-off-by: Christopher Degawa <christopher.degawa@intel.com>
Old "application/*" are now as per RFC8081 deprecated in favor of
new "font/*" mime types. Some new encoders are already using the
updated mime types. We need to also add them to the support list
in order for assrender to correctly identify them as fonts.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1481>
If there is no jitterbuffer stats we should not attempt to store them in the
global stats structure.
Also add a g_return_if_fail in _gst_structure_take_structure() about this
because it is a programmer error to pass an invalid pointer address there.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1479>
* Add fec / red encoders as direct children of webrtcbin, instead
of providing them to rtpbin through the request-fec-encoder signal.
That is because they need to be placed before the rtpfunnel, which
is placed upstream of rtpbin.
* Update configuration of red decoders to set a list of RED payloads
on them, instead of setting the pt property.
That is because there may be one RED pt per media in the same session.
* Connect to request-fec-decoder-full instead of request-fec-decoder,
in order to instantiate FEC decoders according to the payload type
of the stream.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1429>
When an extmap is defined twice for the same ID, firefox complains and
errors out (chrome is smart enough to accept strict duplicates).
To work around this, we deduplicate extmap attributes, and also error
out when a different extmap is defined for the same ID.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1383>
Make sure the EGLImage we're rendering to the GL memory stays alive long enough,
until the the GL memory has been destroyed.
This change fixes tearing and black flashes artefacts that were happening
because the EGLImage was sometimes destroyed before the sink actually rendered
the associated texture.
Fixes#889
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1354>
The average_period should always represent the time between two
events. The specification defines the event time as the time
between audio samples, video frame sync, video line sync, etc.
In case of one timestamp per PDU the timestamp_interval identifies
the amount of events between the timestamp of one PDU and the
timestamp of the next PDU.
As described in IEEE 1722-2016 chapter
"10.4.12 timestamp_interval field" timestamp_interval shall be
nonzero.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1076>
Upstream caps might for example be
application/x-rtp,media=audio,encoding-name={OPUS, X-GST-OPUS-DRAFT-SPITTKA-00, multiopus}
and while that is not fixed caps it is enough to match it with a media.
Only caps structures that have the correct structure name and that have
the media and encoding-name field are preserved, but if both are present
then these caps are used as "codec preferences".
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1291>
.. if a current direction has already been set
When `webrtcbin` has created an offer based on codec_preferences,
it might not have received caps on its sinkpads by the time a
remote description is set, in which case we want to connect the
input stream upon actual reception of the caps instead.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1233>
Detected while reading the code, cccombiner must set
self->current_video_buffer to NULL *after* emitting selected-samples
in order for the application to get a useful return when peeking
the next video sample.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1252>
When schedule is true (as is the case by default), we insert padding
when no caption data is present in the schedule queue, and previously
weren't checking whether the caption pad had gone EOS, leading to
infinite scheduling of padding after EOS on the caption pad.
Rectify that by adding a "drain" parameter to dequeue_caption()
In addition, update the captions_and_eos test to push valid cc_data
in: without this cccombiner was attaching padding buffers it had
generated itself, and with that patch would now stop attaching
said padding to the second buffer. By pushing valid, non-padding
cc_data we ensure a caption buffer is indeed attached to the first
and second video buffers.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1252>
Previously gst_structure_has_name was used to get a string to compare with supported mimetypes.
This is incorrect as above function returns a user defined structure name which is
not the structure mimetype value.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1206>
... in favour of dep.get_variable('foo', ..) which in some
cases allows for further cleanups in future since we can
extract variables from pkg-config dependencies as well as
internal dependencies using this mechanism.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1183>
When ass hinting value is set to anything other than NONE,
subtitles cannot use smooth scaling, thus all animations will jitter.
The libass author warns about possibility of breaking some scripts when it is enabled,
so lets do what is recommended and disable it to get the smooth scaling working.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1201>
The code in the aes elements assumes OpenSSL >= 1.1.0:
- implicit library initialization;
- version retrieved with OpenSSL_version(OPENSSL_VERSION);
and it fails to build with older versions.
Specify the required OpenSSL version explicitly in meson.build so that
the elements are excluded on older systems (e.g. Ubuntu 16.04) and the
rest of GStreamer can still build.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1067>
tests/check/meson.build uses the openjpeg_dep variable
unconditionally, and the subdir_done() is useless anyway, since the
plugin is only built if openjpeg_dep.found() is true. Fixes:
..\tests\check\meson.build:23:0: ERROR: Unknown variable "openjpeg_dep".
In particular, this fixes the build on UWP since we disable openjpeg
explicitly in Cerbero when building for UWP.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1069>
warning C4003: not enough arguments for function-like macro invocation 'warning'
G_STMT_END macro is extended to the below form with MSVC
__pragma(warning(push)) \
__pragma(warning(disable:4127)) \
while(0) \
__pragma(warning(pop))
So MSVC preprocessor will extend it further to
__pragma(VBI_CAT_LEVEL_LOG(push)) ...
Should rename warning() debug macro function therefore.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1018>
The following parameters are supported:
- `color_range`
- `color_primaries`
- `transfer_characteristics`
- `matrix_coefficients`
Added writing of color description into a bit stream
Updated the encoder config structure (API) to support color description parameters
Updated the encoding app to support color description in config files
Added unit tests for color description settings
Added default color description values into the gst plugin
Updated documentation
replace OpenVisualCloud with AOMediaCodec, video.tar.gz file is still
under OpenVisualCloud, so keep the other links.
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
* Cleanup users guide, configuration file and remove extra run-time signals that are not anymore applicable.
* Restrict intra bc for the case where scm is set to 1 only
Co-authored-by: Omran <omran.abdelkafi@intel.com>
* updating CLI support for RDOQ
* updating CLI support for Spatial SSE
* updating CLI support for Palette
* updating CLI support for ALTREF
* updating CLI for CDEF
* updated user guide, sample cfg, --help, and macro use
* Removed all added macros RDOQ_CLI, SSSE_CLI, PALETTE_CLI, ALTREF_CLI, and CDEF_CLI. Renaming and new changes are now made under existing active macros
* removed unnecessary #else and #endif causing build failure
* removed boolean conversion for static_config.cdef_level in non default case
* update CDEF documentation to reflect naming changes
* update altref and palette documentation to reflect naming changes
Add the option of unpinning threads from being executed on cores 0-x when -lp x is defined.
Tuning the multi-threaded buffer tuning for better efficiency with low core count when running in a VOD environment.
* EbSvtAv1Dec.h: remove prototype for non-existent functions
Those functions have apparently never existed in the tree:
- eb_peek_sequence_header()
- eb_svt_decode_obu()
- eb_svt_decode_tu()
- eb_dec_flush()
- eb_get_stream_info()
* EbSvtAv1Dec.h: consistently use the svt_av1_dec_ namespace for public functions
* EbSvtAv1Enc.h: consistently use the svt_av1_enc_ namespace for public functions
* Make Unix conditionals the fallback
Provides a clear path what needs to be ported if the system is neither
Windows nor POSIX-like. If the difference from Linux is minor like on
macOS or BSDs then new conditionals can be added on case-by-case basis.
* gstreamer-plugin: sync Meson version check with CMake
* gstreamer-plugin: don't assume CMake can find libs by default
