With GST_SEEK_FLAG_SNAP_AFTER present, the previous version would
adjust seek time based on the keyframe farthest away from desired_time.
This was incorrect, because we always want the *earliest* suitable keyframe
to seek to, not the last one.
With this fix, in case of the SNAP_AFTER, we now look for the closest keyframe
that can be found after desired_time. Behaviour for SNAP_BEFORE should remain
unchanged.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4183>
The flowcombiner and active_streams shouldn't be cleared in the
mse-bytestream variant, only in the mss-fragmented one. Otherwise the
soft reset leaves qtdemux in a state where it still believes that it has
streams, but they've been cleared. In that case, a null pointer
dereference happens and the app crashes.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4199>
The abort() method of SourceBuffer in Media Source Extensions is
expected to flush the demuxer and discard the current fragment,
if any. The configuration of tracks, if any, should be preserved.
qtdemux has different behavior for flush events depending on the
context.
This patch activates the intended behaviour only for streams of the
VARIANT_MSE_BYTESTREAM type, conformant to the ISO BMFF Bytestream
specification[1]. This flush behaviour is the same as the one
already in use for adaptivedemux sources.
[1] https://www.w3.org/TR/mse-byte-stream-format-isobmff/https://bugzilla.gnome.org/show_bug.cgi?id=795424
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4101>
A data offset with an offset smaller than the moof length is wrong
in smooth streaming streams.
The samples will not be located and eventually playback will
error out. So compensate assuming data is in mdat following moof.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3840>
The av1C box is optional so dropping parsing does not break anything
fundamentally, and there seems to be no historical record how version 0
even looks like while the comments and the parsing disagreed with each
other.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3882>
When using qtdemux in a pipeline that should only work as a pure demuxer (not
for actual playback), qtdemux shouldn't emit new GstSegments to correct
the start time (jump to the future) to ensure that the user experiences no
playback delay. By doing so, it's generating the wrong segments when an append
of data from the past happens. When that happens, downstream elements such as
parsers (eg: aacparse) may clip those buffers laying before the GstSegment and
create problems on the GStreamer client app (eg: WebKit).
Getting buffers clipped out because of the wrong GstSegments started becoming
a problen when this commit was introduced:
ab6e49e9cc audioparsers: add back segment clipping to parsers that have lost it
This clipping makes test DASH shaka 35 from MVT tests[1] to fail in
WebKitGTK/WPE (at least) and can potentially cause a number of other problems
in the WebKit Media Source Extensions (MSE) code.
Note that this new behaviour of not emitting new GstSegments only makes sense
when qtdemux is being used as a pure demuxer and not as part of a regular
pipeline. This is why the variant field has been added. When equal to
VARIANT_MSE_BYTESTREAM, it will make qtdemux behave differently in push mode,
taking decisions that meet the expectations for an MSE-like processing mode.
This kind of tweaks have been done in the past for MSS streams, for instance.
That code has been refactored to use VARIANT_MSS_FRAGMENTED now, instead of
its own dedicated boolean flag.
Co-authored by: Alicia Boya García <ntrrgc@gmail.com>
...who suggested to use "variant: mse-bytestream" in the caps to identify that
mode, as proposed in her unmerged patch:
https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/issues/467
[1] https://github.com/rdkcentral/mvt
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3867>
In theory, `dispose()` functions should be idempotent and should be
prepared not to crash or cause a double-free if an unref done from
inside caused a recursive call to `dispose()` of the same object.
https://developer.gnome.org/gobject/stable/howto-gobject-destruction.html
This patch modifies the `dispose()` method to honor these constraints.
Since the double `dispose()` call won't actually occur in qtdemux (there
is no cycle detection mechanism that could invoke it to work that way),
this is more of a code cleanup than a user-facing problem fix.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3822>
AVC-Intra is a range of H.264-compliant intra-only codecs from
Panasonic. The codes and descriptions have been taken from VLC.
The (encumbered) sample I have here produces byte-stream H.264,
including SPS and PPS and no `avcC` box.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3739>
This reverts the decision from
https://bugzilla.gnome.org/show_bug.cgi?id=754230
where it was decided that we rather play safe and only use the `tfdt` if
it is "significantly different" to the sum of sample durations.
As the specification says
If the time expressed in the track fragment decode time (‘tfdt’) box
exceeds the sum of the durations of the samples in the preceding
movie and movie fragments, then the duration of the last sample
preceding this track fragment is extended such that the sum now
equals the time given in this box.
we have to use the `tfdt` in general to allow for it to signal gaps in
the stream.
A muxer producing fragments might not yet know the full duration of the
last sample of a previous fragment if the next fragment starts with a
gap, and knowing the actual start of the next fragment would potentially
require to violate latency requirements.
Additionally, the existence of `tfdt` allows to avoid accumulating
rounding errors from summing up the durations.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3586>
If we keep the old events they can be end up being passed to the app, that could
discard the protection information because it has been seen before.
Drive by improvement: use g_queue_clear_full instead of foreach+clear for
protection events.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3547>
In a few cases throughout qtdemux, the results of QT_UINT32 were being
stored in a signed integer, which could cause subtle bugs in the case of
an integer overflow, even allowing the the result to equal a negative
number!
This patch prevents this by simply storing the results of this function
call properly in an unsigned integer type. Additionally, we fix up the
length checking with stsd parsing to prevent cases of child atoms
exceeding their parent atom sizes.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3344>
This is a regression that was introduced in
cca2f555d1 (yes, 9 years ago).
The only place where a demuxer streaming thread should be stopped is when the
sinkpad is deactivated from pull mode (i.e. PAUSED->READY).
Attempting to stop the task in this function would cause this to happen when a
FLUSH_STOP or STREAM_START event is received... which can cause deadlocks.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3109>
Various variables were of smaller types than needed and there were no
checks for any overflows when doing additions on the sizes. This is all
checked now.
In addition the size of the decompressed data is limited to 200MB now as
any larger sizes are likely pathological and we can avoid out of memory
situations in many cases like this.
Also fix a bug where the available output size on the next iteration in
the zlib decompression code was provided too large and could
potentially lead to out of bound writes.
Thanks to Adam Doupe for analyzing and reporting the issue.
CVE: tbd
https://gstreamer.freedesktop.org/security/sa-2022-0003.html
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1225
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2610>
The timestamp in the tfdt refers to the first trun box and if there are
multiple trun boxes then the distance between the first timestamps will
grow.
At some point this distance reaches a threshold and triggers the
resetting of the first sample's timestamp of this trun box to be reset
to the tfdt.
This threshold is implemented for files where there is a jump in the
timeline between fragments and where this can be detected via a jump
between the end timestamp of the previous fragment and the tfdt of the
next. This behaviour is preserved.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2409>
GLib guarantees libintl is always present, using proxy-libintl as
last resort. There is no need to mock gettex API any more.
This fix static build on Windows because G_INTL_STATIC_COMPILATION must
be defined before including libintl.h, and glib does it for us as part
as including glib.h.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>
Each stream may have its own segment timeline
(i.g., different segment.start or segment.base)
depending on edit-list and composition-to-decode atom.
Make sure whether time position of a stream has been actually
far behind than that of current target stream.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1352>
Negative composition time offsets are only allowed with version 1 of the
box, however we parse it as a signed value also for version 0 boxes as
unfortunately there are such files out there and it's unlikely to have
(valid) huge composition offsets.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1294>
WebVTT in ISO MP4 is specified in ISO 14496-30,
and needed for DASH support. It's stored in an
mp4 specific format. To handle it compatibly,
the wvtt boxes are converted back into WebVTT text
and pushed as application/x-subtitle-vtt
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1182>
Swap the `need_process` boolean check on qtdemux streams
for a direct function pointer to the splitting function,
so we can stop adding extra cases to the single growing
`gst_qtdemux_process_buffer()` function.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1182>
