For more optimised RTP packet handling: means we don't
need to map the input buffer again but can just re-use
the mapping the base class has already done.
https://bugzilla.gnome.org/show_bug.cgi?id=750235
Remove the pt restrictions for all the depayloaders that have an
encoding-name. We can use this to autoplug decoders.
Remove the encoding-name for all the payloaders with a fixed payload
type.
We now either have an encoding-name or a pt in the sinkpad caps of
a depayloader.
See https://bugzilla.gnome.org/show_bug.cgi?id=639292
encoding name is required in the caps and is a better fit for autoplugging than
the pt value. Hardware manufacturers have a bad habit of skimming through RFCs
and in this case; use unassigned numbers for encoders instead of dynamic
numbers.
In essence, this patch will add support for a lot of Bosch hardware encoders
without breaking autoplugging.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=639292
So we stop dropping fragments as soon as there is a picture start (code).
In particular, this prevents dropping the first frame following
initial DISCONT.
Original commit message from CVS:
* gst/rtp/gstrtpL16depay.c: (gst_rtp_L16_depay_setcaps),
(gst_rtp_L16_depay_process):
Check if clock-rate and channels are valid.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpL16pay.c: (gst_rtp_L16_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpac3depay.c: (gst_rtp_ac3_depay_setcaps),
(gst_rtp_ac3_depay_process):
Don't ignore the return value of set_caps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtpamrdepay.c: (gst_rtp_amr_depay_setcaps),
(gst_rtp_amr_depay_process):
* gst/rtp/gstrtpamrdepay.h:
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set output caps on the buffers, the base class does that for
us.
The subclass will make sure we are negotiated.
* gst/rtp/gstrtpdvdepay.c: (gst_rtp_dv_depay_setcaps),
(gst_rtp_dv_depay_process), (gst_rtp_dv_depay_reset):
* gst/rtp/gstrtpdvdepay.h:
Clean up caps negotiation.
The subclass will make sure we are negotiated.
* gst/rtp/gstrtpg726depay.c: (gst_rtp_g726_depay_setcaps),
(gst_rtp_g726_depay_process):
Clean up caps negotiation.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpg729depay.c: (gst_rtp_g729_depay_init),
(gst_rtp_g729_depay_setcaps), (gst_rtp_g729_depay_process):
* gst/rtp/gstrtpg729depay.h:
The subclass will make sure we are negotiated.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpgsmdepay.c: (gst_rtp_gsm_depay_setcaps),
(gst_rtp_gsm_depay_process):
Clean up caps negotiation.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpgsmpay.c: (gst_rtp_gsm_pay_setcaps):
Clean up caps negotiation.
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtph263depay.c: (gst_rtp_h263_depay_setcaps),
(gst_rtp_h263_depay_process):
Clean up caps negotiation.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtph263pay.c: (gst_rtp_h263_pay_setcaps),
(gst_rtp_h263_pay_flush), (gst_rtp_h263_pay_handle_buffer):
* gst/rtp/gstrtph263pay.h:
Don't ignore the return value of set_outcaps.
Do some more timestamps.
* gst/rtp/gstrtph263pdepay.c: (gst_rtp_h263p_depay_setcaps),
(gst_rtp_h263p_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtph263ppay.c: (gst_rtp_h263p_pay_class_init),
(gst_rtp_h263p_pay_setcaps), (gst_rtp_h263p_pay_flush),
(gst_rtp_h263p_pay_handle_buffer):
* gst/rtp/gstrtph263ppay.h:
Don't ignore the return value of set_outcaps.
Do some more timestamps.
* gst/rtp/gstrtph264depay.c: (gst_rtp_h264_depay_setcaps),
(gst_rtp_h264_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
Fix possible caps leak.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtph264pay.c: (gst_rtp_h264_pay_setcaps):
Add some more debug info.
* gst/rtp/gstrtpilbcdepay.c: (gst_rtp_ilbc_depay_setcaps),
(gst_rtp_ilbc_depay_process):
Clean up caps negotiation.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpilbcpay.c: (gst_rtpilbcpay_sink_setcaps):
Clean up caps negotiation.
* gst/rtp/gstrtpmp1sdepay.c: (gst_rtp_mp1s_depay_setcaps),
(gst_rtp_mp1s_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set caps on buffers, subclass does that for us.
* gst/rtp/gstrtpmp2tdepay.c: (gst_rtp_mp2t_depay_setcaps),
(gst_rtp_mp2t_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set caps on buffers, subclass does that for us.
* gst/rtp/gstrtpmp4adepay.c: (gst_rtp_mp4a_depay_setcaps),
(gst_rtp_mp4a_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtpmp4apay.c: (gst_rtp_mp4a_pay_new_caps),
(gst_rtp_mp4a_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpmp4gdepay.c: (gst_rtp_mp4g_depay_setcaps),
(gst_rtp_mp4g_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set caps on buffers, subclass does that for us.
* gst/rtp/gstrtpmp4gpay.c: (gst_rtp_mp4g_pay_finalize),
(gst_rtp_mp4g_pay_new_caps), (gst_rtp_mp4g_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpmp4vdepay.c: (gst_rtp_mp4v_depay_setcaps),
(gst_rtp_mp4v_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set caps on buffers, subclass does that for us.
* gst/rtp/gstrtpmp4vpay.c: (gst_rtp_mp4v_pay_new_caps),
(gst_rtp_mp4v_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpmpadepay.c: (gst_rtp_mpa_depay_setcaps),
(gst_rtp_mpa_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpmpapay.c: (gst_rtp_mpa_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpmpvdepay.c: (gst_rtp_mpv_depay_setcaps),
(gst_rtp_mpv_depay_process):
Clean up caps negotiation.
Actually set output caps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtpmpvpay.c: (gst_rtp_mpv_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtppcmadepay.c: (gst_rtp_pcma_depay_setcaps),
(gst_rtp_pcma_depay_process):
Clean up caps negotiation.
Set output buffer duration because we can.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtppcmapay.c: (gst_rtp_pcma_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtppcmudepay.c: (gst_rtp_pcmu_depay_setcaps),
(gst_rtp_pcmu_depay_process):
Clean up caps negotiation.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtppcmupay.c: (gst_rtp_pcmu_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpspeexdepay.c: (gst_rtp_speex_depay_init),
(gst_rtp_speex_depay_setcaps), (gst_rtp_speex_depay_process):
Clean up caps negotiation.
Set output caps on the pad and header buffers.
Set duration on output buffers because we can.
* gst/rtp/gstrtpspeexpay.c: (gst_rtp_speex_pay_parse_ident):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpsv3vdepay.c: (gst_rtp_sv3v_depay_setcaps),
(gst_rtp_sv3v_depay_process):
Clean up caps negotiation.
No need to validate the buffer, the base class does that for us.
No need to set caps out output buffers, subclass does that.
* gst/rtp/gstrtptheoradepay.c: (gst_rtp_theora_depay_setcaps),
(gst_rtp_theora_depay_process):
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtptheorapay.c: (gst_rtp_theora_pay_class_init),
(gst_rtp_theora_pay_flush_packet), (encode_base64),
(gst_rtp_theora_pay_finish_headers), (gst_rtp_theora_pay_parse_id),
(gst_rtp_theora_pay_handle_buffer):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpvorbisdepay.c: (gst_rtp_vorbis_depay_setcaps),
(gst_rtp_vorbis_depay_process):
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtpvorbispay.c: (gst_rtp_vorbis_pay_finish_headers):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpvrawdepay.c: (gst_rtp_vraw_depay_setcaps):
Clean up caps negotiation, don't ignore setcaps return.
* gst/rtp/gstrtpvrawpay.c: (gst_rtp_vraw_pay_setcaps):
Don't ignore the return value of set_outcaps.
Original commit message from CVS:
* gst/rtp/gstrtph263depay.c: (gst_rtp_h263_depay_class_init),
(gst_rtp_h263_depay_process):
Code beautification.
Added debug statements.
Don't bit-shift everything, just do operations on last/first byte
instead.
Original commit message from CVS:
* gst/rtp/gstrtph263depay.c: (gst_rtp_h263_depay_init),
(gst_rtp_h263_depay_process):
* gst/rtp/gstrtph263depay.h:
Fix h263 depayloader so that ANY h263 decoder can handle the outgoing
stream.
Original commit message from CVS:
* gst/rtp/gstrtph263depay.c: (gst_rtp_h263_depay_process):
Read the I flag for Mode A h263 rtp stream and set the
GST_BUFFER_FLAG_DELTA_UNIT accordingly.
Fixes#499383
