Original commit message from CVS:
Try a bit harder to get the correct Qt dir. At some point I'll split this
out into a real check for Qt, but for now I just want the KIO plugin to
actually build.
Original commit message from CVS:
* configure.ac:
* gst-libs/gst/gconf/Makefile.am:
* pkgconfig/Makefile.am:
move gstreamer-gconf pkgconfig files to pkgconfig/ dir. Make sure
they get rebuilt properly
* configure.ac:
when checking for vorbis, try pkgconfig first.
* gst/modplug/gstmodplug.cc:
add fixate function
Original commit message from CVS:
* configure.ac: the Hermes library controls hermescolorspace, not
colorspace.
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_base_init),
(gst_mpeg2dec_init): minor pet peeve: disable code with #ifdef,
not /* */
* ext/sdl/sdlvideosink.c: Change XID to unsigned long.
* ext/sdl/sdlvideosink.h: ditto.
* gst/colorspace/gstcolorspace.c: Fix old comments about Hermes
Original commit message from CVS:
2004-02-20 Andy Wingo <wingo@pobox.com>
* gst/intfloat/, gst/oneton: Removed, replaced by audioconvert and
interleave respectively.
* gst/interleave/deinterleave.c: New plugin: deinterleave
(replaces on oneton).
* gst/interleave/interleave.c: New plugin: interleave.
* gst/interleave/plugin.h: Support file.
* gst/interleave/plugin.c: Support file.
* configure.ac: Remove intfloat and oneton, add interleave.
* ext/sndfile/gstsf.c: Handle events better.
* gst/audioconvert/gstaudioconvert.c: Change to support int2float
and float2int operation. int2float has scheduling problems as
noted in in2float_chain.
Original commit message from CVS:
2004-02-20 Benjamin Otte <otte@gnome.org>
* ext/xine/Makefile.am:
* ext/xine/gstxine.h:
* ext/xine/xine.c:
* ext/xine/xineaudiodec.c:
* ext/xine/xinecaps.c:
add first version of xine plugin wrapper. Currently only wraps the
QDM2 win32 DLL, and even that only in proof-of-concept quality.
* configure.ac:
* ext/Makefile.am:
add xine plugin wrapper, disabled by default. Use --enable-xine to
build. Note that it'll segfault on gst-register if you don't remove
the goom and tvtime post plugins from xine.
* gst/qtdemux/qtdemux.c: (gst_qtdemux_handle_sink_event),
(qtdemux_parse), (qtdemux_parse_trak), (qtdemux_audio_caps):
add extradata parsing for QDM2.
change around debugging prints.
Original commit message from CVS:
Convert a few inner loops to use liboil. This is currently
optional, and is only enabled if liboil is present (duh!).
* configure.ac: Check for liboil-0.1
* gst/intfloat/Makefile.am:
* gst/intfloat/gstint2float.c: (conv_f32_s16), (scalarmult_f32),
(gst_int2float_chain_gint16):
* gst/videofilter/Makefile.am:
* gst/videofilter/gstvideobalance.c: (gst_videobalance_class_init),
(tablelookup_u8), (gst_videobalance_planar411):
* gst/videotestsrc/Makefile.am:
* gst/videotestsrc/gstvideotestsrc.c: (plugin_init):
* gst/videotestsrc/videotestsrc.c: (splat_u8), (paint_hline_YUY2),
(paint_hline_IYU2), (paint_hline_str4), (paint_hline_str3),
(paint_hline_RGB565), (paint_hline_xRGB1555):
Original commit message from CVS:
2004-02-03 Benjamin Otte <in7y118@public.uni-hamburg.de>
* common/m4/ax_create_stdint_h.m4:
* configure.ac:
add AX_CREATE_STDINT_H to get correct type definitions for a52dec in
_stdint.h.
* Makefile.am:
remove generated _stdint.h in DISTCLEANFILES
* ext/a52dec/gsta52dec.c:
include _stdint.h for a52dec. (should fix#133064)
Original commit message from CVS:
2004-01-30 Benjamin Otte <in7y118@public.uni-hamburg.de>
* configure.ac:
use AC_C_INLINE
* configure.ac:
* ext/Makefile.am:
* ext/theora/Makefile.am:
* ext/theora/theoradec.c:
add theora video decoder. Does just do simple decoding for now and
has been tested against Theora cvs only.
* ext/vorbis/vorbisdec.c: (vorbis_dec_event):
always reset packetno on DISCONT
Original commit message from CVS:
* configure.ac:
* gst/colorspace/Makefile.am:
* gst/colorspace/gstcolorspace.c:
* gst/colorspace/gstcolorspace.h:
* gst/colorspace/yuv2rgb.c:
* gst/colorspace/yuv2rgb.h:
Duplicate the ext/hermes colorspace plugin, and remove Hermes
code and GPL code. Fix for new caps negotiation. Rewrite
much of the format handling code, and some of the conversion
code. Basically, rewrote almost everything. This element
handles I420, YV12 to RGB conversions.
* ext/hermes/Makefile.am:
* ext/hermes/gsthermescolorspace.c:
Rename colorspace to hermescolorspace. Fix negotiation issues.
Remove non-Hermes related code. This element handles lots of
RGB to RGB conversions, but no YUV.
* ext/hermes/gstcolorspace.c:
* ext/hermes/gstcolorspace.h:
* ext/hermes/rgb2yuv.c:
* ext/hermes/yuv2rgb.c:
* ext/hermes/yuv2rgb.h:
* ext/hermes/yuv2rgb_mmx16.s:
* ext/hermes/yuv2yuv.c:
* ext/hermes/yuv2yuv.h:
Remove old code.
Original commit message from CVS:
2004-01-01 Ronald Bultje <rbultje@ronald.bitfreak.net>
* configure.ac:
Fix configure check for mpeg2enc. We need 1.6.1.93 instead of
1.6.1.92, since the pkg-config file of 1.6.1.92 is borked and
it therefore uses the wrong include paths. Too bad... Note
that 1.6.1.93 is not release yet. ;).
Also add a check for mplex, which is now using the lib'ified
mplex from mjpegtools, too.
* ext/ffmpeg/gstffmpegcodecmap.c:
Add codec_tag for 3ivx/xvid. For xvid, this should fix playback
issues. I don't think ffmpeg handles 3ivx correctly, so this
probably won't work. But it won't hurt either.
* ext/ffmpeg/gstffmpegdec.c: (gst_ffmpegdec_connect),
(gst_ffmpegdec_chain):
* ext/ffmpeg/gstffmpegenc.c: (gst_ffmpegenc_connect),
(gst_ffmpegenc_chain_audio):
Fix memleak in audio encoding. Close codec if open fails, this
calls the cleanup routines so we can re-use the context.
* ext/mpeg2enc/gstmpeg2enc.cc:
Fix pad template names/types, fix memory issue with getcaps().
* ext/mpeg2enc/gstmpeg2encoder.cc:
* ext/mpeg2enc/gstmpeg2encoder.hh:
Fix compile issue with new caps system (const thingy).
* ext/mpeg2enc/gstmpeg2encpicturereader.cc:
* ext/mpeg2enc/gstmpeg2encpicturereader.hh:
We read a first frame right on initing, so that we have a caps
when we init the output. This caps is cached in padprivate and
read as first frame.
* ext/mplex/Makefile.am:
* ext/mplex/gstmplex.cc:
* ext/mplex/gstmplex.h:
* ext/mplex/gstmplex.hh:
* ext/mplex/gstmplexibitstream.cc:
* ext/mplex/gstmplexibitstream.hh:
* ext/mplex/gstmplexjob.cc:
* ext/mplex/gstmplexjob.hh:
* ext/mplex/gstmplexoutputstream.cc:
* ext/mplex/gstmplexoutputstream.hh:
We wrap mjpegtools mplex. So I rewrote the plugin. The old plugin
had issues, didn't do capsnego, supported only a subset of the
mplex features and required a mplex fork in our local CVS. Plus
that it worked agaist a very old mplex version. Rewriting was
faster than updating it.
* gst-libs/ext/Makefile.am:
* gst-libs/ext/mplex/INSTRUCT:
* gst-libs/ext/mplex/Makefile.am:
* gst-libs/ext/mplex/README:
* gst-libs/ext/mplex/TODO:
* gst-libs/ext/mplex/ac3strm_in.cc:
* gst-libs/ext/mplex/audiostrm.hh:
* gst-libs/ext/mplex/audiostrm_out.cc:
* gst-libs/ext/mplex/aunit.hh:
* gst-libs/ext/mplex/bits.cc:
* gst-libs/ext/mplex/bits.hh:
* gst-libs/ext/mplex/buffer.cc:
* gst-libs/ext/mplex/buffer.hh:
* gst-libs/ext/mplex/fastintfns.h:
* gst-libs/ext/mplex/format_codes.h:
* gst-libs/ext/mplex/inputstrm.cc:
* gst-libs/ext/mplex/inputstrm.hh:
* gst-libs/ext/mplex/lpcmstrm_in.cc:
* gst-libs/ext/mplex/mjpeg_logging.cc:
* gst-libs/ext/mplex/mjpeg_logging.h:
* gst-libs/ext/mplex/mjpeg_types.h:
* gst-libs/ext/mplex/mpastrm_in.cc:
* gst-libs/ext/mplex/mpegconsts.cc:
* gst-libs/ext/mplex/mpegconsts.h:
* gst-libs/ext/mplex/mplexconsts.hh:
* gst-libs/ext/mplex/multplex.cc:
* gst-libs/ext/mplex/outputstream.hh:
* gst-libs/ext/mplex/padstrm.cc:
* gst-libs/ext/mplex/padstrm.hh:
* gst-libs/ext/mplex/stillsstream.cc:
* gst-libs/ext/mplex/stillsstream.hh:
* gst-libs/ext/mplex/systems.cc:
* gst-libs/ext/mplex/systems.hh:
* gst-libs/ext/mplex/vector.cc:
* gst-libs/ext/mplex/vector.hh:
* gst-libs/ext/mplex/videostrm.hh:
* gst-libs/ext/mplex/videostrm_in.cc:
* gst-libs/ext/mplex/videostrm_out.cc:
* gst-libs/ext/mplex/yuv4mpeg.cc:
* gst-libs/ext/mplex/yuv4mpeg.h:
* gst-libs/ext/mplex/yuv4mpeg_intern.h:
* gst-libs/ext/mplex/yuv4mpeg_ratio.cc:
We don't fork mjpegtools' mplex in our CVS anymore.
* gst/avi/gstavidemux.c: (gst_avi_demux_src_getcaps),
(gst_avi_demux_add_stream):
* gst/avi/gstavidemux.h:
Add getcaps() function for proper caps nego. This makes some
parts of AVI playback/reading work.
* sys/ximage/ximagesink.c: (gst_ximagesink_sinkconnect):
Resize window on new capsnego. This is probably wrong, but
I'm still committing it because with current capsnego, the
first successfull capsnego is auto-fixated, therefore rounded
down to the lowest values in the caps. this results in a 16x16
XWindow that is not reized when real capsnego finishes.
Dave, I see more cases of this, do you know a proper solution?
* tools/gst-launch-ext.in:
Fix MPEG-4 AAC (Apple iPod/iTunes) file commandline.
