Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (message_handler):
* gst/spectrum/demo-osssrc.c: (message_handler):
Remove two obsolete and confusing comments.
Original commit message from CVS:
* tests/check/Makefile.am:
Gah! Also disable gconfvideosink from the tests, otherwise
it will instantiate autovideosink, and dfbvideosink and
leak on the buildbots.
Original commit message from CVS:
* tests/check/Makefile.am:
Disable autovideosink so the buildbots don't barf over memory
leaked in the directfb sink.
Original commit message from CVS:
* tests/check/Makefile.am:
Disable cacasink from the states check too - it also calls exit(1)
on us when it can't find a terminal to talk to.
Original commit message from CVS:
* tests/check/Makefile.am:
Disable aasink in the states test. I suspect this is the element that
is calling exit(1) when it can't proceed.
Original commit message from CVS:
* tests/check/Makefile.am:
Draw plugins in from the build tree sys/ dir, rather than picking
up the already installed versions.
Original commit message from CVS:
* gst/videocrop/gstvideocrop.c:
(gst_video_crop_get_image_details_from_caps),
(gst_video_crop_transform_packed_complex):
Fix cropping for packed 4:2:2 formats YUYV/YUY2 and UYVY.
* tests/icles/videocrop-test.c: (check_bus_for_errors),
(test_with_caps), (main):
Block streaming thread before changing filter caps while the
pipeline is running so that we don't get random not-negotiated
errors just because GStreamer can't handle that yet.
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* gst/audiofx/Makefile.am:
* gst/audiofx/audioamplify.c:
(gst_audio_amplify_clipping_method_get_type),
(gst_audio_amplify_base_init), (gst_audio_amplify_class_init),
(gst_audio_amplify_init), (gst_audio_amplify_set_process_function),
(gst_audio_amplify_set_property), (gst_audio_amplify_get_property),
(gst_audio_amplify_set_caps),
(gst_audio_amplify_transform_int_clip),
(gst_audio_amplify_transform_int_wrap_negative),
(gst_audio_amplify_transform_int_wrap_positive),
(gst_audio_amplify_transform_float_clip),
(gst_audio_amplify_transform_float_wrap_negative),
(gst_audio_amplify_transform_float_wrap_positive),
(gst_audio_amplify_transform_ip):
* gst/audiofx/audioamplify.h:
* gst/audiofx/audiofx.c: (plugin_init):
Add new element "audioamplify". This allows scaling of raw audio
samples, similar to the "volume" element, but provides different modes
for clipping and allows unlimited amplification. It's mainly targeted
for creative sound design and not as a replacement of the "volume"
element. Fixes#397162
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/inspect/plugin-audiofx.xml:
Add docs for audioamplify and integrate them into the build system
* tests/check/Makefile.am:
* tests/check/elements/audioamplify.c: (setup_amplify),
(cleanup_amplify), (GST_START_TEST), (amplify_suite), (main):
Add fairly extensive unit test suite for audioamplify
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* gst/audiofx/Makefile.am:
* gst/audiofx/audiofx.c: (plugin_init):
* gst/audiofx/audioinvert.c: (gst_audio_invert_base_init),
(gst_audio_invert_class_init), (gst_audio_invert_init),
(gst_audio_invert_set_property), (gst_audio_invert_get_property),
(gst_audio_invert_set_caps), (gst_audio_invert_transform_int),
(gst_audio_invert_transform_float),
(gst_audio_invert_transform_ip):
* gst/audiofx/audioinvert.h:
Add new audiofx element "audioinvert". This element swaps the upper
and lower half of samples and can be used for example for a
wide-stereo effect. Fixes#396057
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/gst-plugins-good-plugins.args:
* docs/plugins/inspect/plugin-audiofx.xml:
Add docs for the audioinvert element and add them to the build system.
* tests/check/Makefile.am:
* tests/check/elements/audioinvert.c: (setup_invert),
(cleanup_invert), (GST_START_TEST), (invert_suite), (main):
Add unit test suite for the audioinvert element.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet be>
* gst/avi/gstavimux.c: (gst_avi_mux_finalize),
(gst_avi_mux_pad_reset), (gst_avi_mux_reset), (gst_avi_mux_init),
(gst_avi_mux_vidsink_set_caps), (gst_avi_mux_audsink_set_caps),
(gst_avi_mux_request_new_pad), (gst_avi_mux_release_pad),
(gst_avi_mux_riff_get_avi_header),
(gst_avi_mux_riff_get_avix_header), (gst_avi_mux_riff_get_header),
(gst_avi_mux_write_avix_index), (gst_avi_mux_add_index),
(gst_avi_mux_bigfile), (gst_avi_mux_start_file),
(gst_avi_mux_stop_file), (gst_avi_mux_handle_event),
(gst_avi_mux_do_buffer), (gst_avi_mux_do_one_buffer),
(gst_avi_mux_change_state):
* gst/avi/gstavimux.h:
* tests/check/elements/avimux.c: (teardown_src_pad):
Add support for more than one audio stream; write better AVIX
header; refactor code a bit; don't announce vorbis caps on our audio
sink pads since we don't support it anyway. Closes#379298.
Original commit message from CVS:
* tests/icles/videocrop-test.c: (main):
Call g_thread_init() right at the beginning. Remove superfluous
gst_init() - we've already been inited via the GOption stuff.
Original commit message from CVS:
* tests/check/elements/videocrop.c: (GST_START_TEST),
(videocrop_test_cropping_init_context):
When we can't create an element needed for the test, print a message
detailing which element it actually is that's missing (#390673).
Original commit message from CVS:
* gst/matroska/matroska-mux.c: (gst_matroska_mux_class_init),
(gst_matroska_mux_request_new_pad):
Use GST_DEBUG_FUNCPTR; activate request pad before returning it.
* tests/check/elements/matroskamux.c: (setup_src_pad),
(setup_sink_pad), (GST_START_TEST):
Activate pads before using them.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_set_wp_config):
* ext/wavpack/gstwavpackparse.c:
(gst_wavpack_parse_create_src_pad):
* gst/nuvdemux/gstnuvdemux.c: (gst_nuv_demux_create_pads):
* tests/check/elements/wavpackparse.c: (wavpackparse_found_pad):
Activate pads before adding them to running element.
Original commit message from CVS:
* gst/apetag/gsttagdemux.c: (gst_tag_demux_add_srcpad):
* gst/icydemux/gsticydemux.c: (gst_icydemux_add_srcpad):
* gst/id3demux/gstid3demux.c: (gst_id3demux_add_srcpad):
Activate pad before adding it to the already-running element.
* tests/check/elements/icydemux.c: (icydemux_found_pad):
Activate newly-created pad too.
Original commit message from CVS:
* tests/icles/.cvsignore:
* tests/icles/Makefile.am:
* tests/icles/videocrop-test.c: (quit_mainloop), (tick_cb),
(test_with_caps), (video_crop_get_test_caps), (main):
Visual test for videocrop, shows that packed yuv doesn't work right
yet. --with-ffmpegcolorspace option doesn't work yet for unknown
reasons (another basetransform issue?)
Original commit message from CVS:
* tests/check/Makefile.am:
Disable autodetect test temporarily, so that the build bots
update -bad and the ranks of unreliable video sinks in there.
* tests/check/elements/autodetect.c: (GST_START_TEST):
Skip test if no usable videosink is found.
Original commit message from CVS:
* gst/autodetect/gstautoaudiosink.c:
(gst_auto_audio_sink_base_init):
* gst/autodetect/gstautovideosink.c:
(gst_auto_video_sink_base_init):
Make static pad templates static to appease valgrind's leak
detector.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/autodetect.c: (GST_START_TEST),
(autodetect_suite):
Add simple test for the ghostpad lockup on shutdown fixed in core
CVS (audio bit disabled because it would need dozens of alsa
suppressions and I'm too lazy to add those now).
Original commit message from CVS:
* gst/icydemux/gsticydemux.c: (gst_icydemux_reset),
(gst_icydemux_typefind_or_forward):
* gst/icydemux/gsticydemux.h:
When we merge/collect multiple incoming buffers for typefinding
purposes, keep an initial 0 offset on the first outgoing buffer
as well (otherwise id3demux won't work right). Fixes#345449.
Also Make buffer metadata writable before setting buffer caps.
* tests/check/elements/icydemux.c: (typefind_succeed),
(cleanup_icydemux), (push_data), (GST_START_TEST),
(icydemux_suite):
Small test case for the above.
Original commit message from CVS:
* gst/spectrum/demo-osssrc.c: (draw_spectrum), (main):
Use more defines
* gst/spectrum/gstspectrum.c: (gst_spectrum_init),
(gst_spectrum_dispose), (gst_spectrum_set_caps),
(gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
Apply some of the spectrum cleanup changes suggested in #348085.
Original commit message from CVS:
* configure.ac:
Bump requirements of -base (videocrop test case needs this).
* gst/videocrop/gstvideocrop.c:
Document sloppy handling of subsampled chroma planes if
left/top cropping is an odd number.
* tests/check/elements/videocrop.c: (handoff_cb),
(videocrop_test_cropping_init_context),
(videocrop_test_cropping_deinit_context),
(videocrop_test_cropping), (check_1x1_buffer), (GST_START_TEST),
(videocrop_suite), (main):
Add another unit test that crops the input to 1x1 (and checks
that that pixel has the expected values in a number of formats).
Original commit message from CVS:
* tests/check/elements/videocrop.c: (handoff_cb),
(buffer_probe_cb), (test_caps_transform), (test_passthrough),
(notgst_value_list_get_nth_int), (videocrop_suite):
More tests: check passthrough mode and caps transform in
both directions with fixed values, ranges and lists.
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* ext/annodex/gstannodex.c: (gst_annodex_granule_to_time):
Do some extra sanity checks.
Fixes#350340.
* ext/annodex/gstcmmlenc.c: (gst_cmml_enc_change_state),
(gst_cmml_enc_parse_tag_head), (gst_cmml_enc_parse_tag_clip),
(gst_cmml_enc_push_clip), (gst_cmml_enc_push):
Check if clip->start_time is valid before adding the clip to the
track list.
Reset enc->preamble going from PAUSED to READY.
Don't use GST_FLOW_UNEXPECTED for wrong usage of the element, it is
only used for EOS.
Only post an error message if we were the one that created the fatal
GstFlowReturn value.
* ext/annodex/gstcmmlutils.c: (gst_cmml_clock_time_from_npt),
(gst_cmml_clock_time_to_granule), (gst_cmml_track_list_has_clip):
Parse the seconds field of the npt-sec time format using %llu rather than
%d and check that the value scaled by GST_SECOND doesn't overflow.
Use guint64(s) to represent the keyindex and keyoffset fields of a granulepos.
Lookup a clip's track with clip->track rather than clip->id which
makes no sense.
Identify a clip by its track and start time and not its xml id.
do some more input checking and make sure we don't do undefined shifts.
* tests/check/elements/cmmldec.c: (setup_cmmldec),
(teardown_cmmldec), (check_output_buffer_is_equal), (push_data),
(cmml_tag_message_pop), (check_headers), (push_clip_full),
(push_clip), (push_empty_clip), (check_output_clip),
(GST_START_TEST), (cmmldec_suite):
* tests/check/elements/cmmlenc.c: (setup_cmmlenc),
(teardown_cmmlenc), (check_output_buffer_is_equal), (push_data),
(check_headers), (push_clip), (check_clip_times), (check_clip),
(check_empty_clip), (GST_START_TEST), (cmmlenc_suite):
Added some more checks.
Original commit message from CVS:
* gst/audiofxgood/audiopanorama.c: (gst_audio_panorama_class_init),
(gst_audio_panorama_set_property),
(gst_audio_panorama_get_property),
(gst_audio_panorama_transform_m2s_int),
(gst_audio_panorama_transform_s2s_int),
(gst_audio_panorama_transform_m2s_float),
(gst_audio_panorama_transform_s2s_float):
* gst/audiofxgood/audiopanorama.h:
* tests/check/elements/audiopanorama.c: (GST_START_TEST):
Make also the pan-property float (saves scaling and yields better
resolution)
