Original commit message from CVS:
* configure.ac:
* sys/Makefile.am:
* sys/directdraw/Makefile.am:
* sys/directsound/Makefile.am:
* sys/waveform/Makefile.am:
Make sure to dist everything needed for win32 builds.
Original commit message from CVS:
* configure.ac:
Bump requirements to released versions (core and base 0.10.13).
* gst/icydemux/gsticydemux.c: (gst_icydemux_unicodify):
Use gst_tag_utf8_from_freeform_string() from libgsttag instead of
own implementation.
Original commit message from CVS:
Patch by: René Stadler <mail at renestadler dot de>
* configure.ac:
* gst/auparse/gstauparse.c: (gst_au_parse_reset),
(gst_au_parse_parse_header), (gst_au_parse_chain):
* gst/auparse/gstauparse.h:
Use audioconvert for converting from non-native endianness floats
in auparse instead of doing it ourself. Fixes#424527.
This needs the audioconvert from plugins-base CVS.
Original commit message from CVS:
* configure.ac:
* gst/auparse/gstauparse.c: (gst_au_parse_reset),
(gst_au_parse_parse_header), (gst_au_parse_chain):
* gst/auparse/gstauparse.h:
Revert last change as we don't want plugins-good to depend on
plugins-base CVS now.
Original commit message from CVS:
* configure.ac:
Require gst-plugins-base CVS for audioconvert with non-native
float support and width/depth fix in libgstriff.
Patch by: René Stadler <mail at renestadler dot de>
* gst/auparse/gstauparse.c: (gst_au_parse_reset),
(gst_au_parse_parse_header), (gst_au_parse_chain):
* gst/auparse/gstauparse.h:
Don't swap the floats ourself if they're not in native endianness.
Instead let audioconvert handle this. Fixes#339838.
Original commit message from CVS:
* gst/id3demux/gstid3demux.c: (gst_id3demux_add_srcpad),
(gst_id3demux_sink_activate):
Don't leak caps: make gst_id3demux_add_srcpad() not take ownership of the
caps passed to it (previouslly one code path assumes it takes ownership
while another one assumes it doesn't).
* configure.ac:
* tests/files/Makefile.am:
* tests/files/id3-407349-1.tag:
* tests/files/id3-407349-2.tag:
Add directory where data for unit tests can be stored.
* tests/Makefile.am:
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/id3demux.c: (pad_added_cb), (error_cb),
(read_tags_from_file), (run_check_for_file),
(check_date_1977_06_23), (GST_START_TEST), (id3demux_suite):
Add unit test for id3demux, and in particular for bug #407349. Only
testing pull-mode for now; push mode doesn't work yet because the test
files are smaller than ID3_TYPE_FIND_MIN_SIZE.
Original commit message from CVS:
* configure.ac:
Activate monoscope when building with --enable-experimental. Fix
--enable-external configure switch description.
* sys/sunaudio/gstsunaudiomixer.c: (gst_sunaudiomixer_base_init):
* sys/sunaudio/gstsunaudiosrc.c: (gst_sunaudiosrc_dispose):
Help gst-indent.
Original commit message from CVS:
=== release 0.10.5 ===
2006-12-21 Jan Schmidt <thaytan@mad.scientist.com>
* configure.ac:
releasing 0.10.5, "The Path of Thorns"
Original commit message from CVS:
* configure.ac:
Make sure libcaca can actually be used instead of just checking for
/usr/bin/caca-config, so we don't wrongly try to build cacasink when
cross-compiling (fixes#384587).
Original commit message from CVS:
* configure.ac:
libflac-1.1.3 changed API again, but we can't build against it yet,
so make sure our check doesn't use libflac-1.1.3 and add a comment
to this effect.
Original commit message from CVS:
* configure.ac:
* sys/Makefile.am:
add build stuff for v4l2, needs --enable-experimental until
the last bits are resolved
Original commit message from CVS:
* configure.ac:
Require CVS of GStreamer core and -base (for
GST_TAG_EXTENDED_COMMENT and gst_tag_parse_extended_comment()).
* ext/taglib/gstid3v2mux.cc:
Write extended comment tags properly (#348762).
* gst/id3demux/id3v2frames.c: (id3demux_id3v2_parse_frame),
(parse_comment_frame):
Extract COMM frames into extended comments, which makes it
easier to properly retain the description bit of the tag
and maintain this information when re-tagging (#348762).
Original commit message from CVS:
Patch by: Edward Hervey <edward@fluendo.com>
* configure.ac:
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek),
(gst_wavparse_stream_data):
Send the newsegment event in the streaming thread.
Fixes#347529
Original commit message from CVS:
2006-06-19 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* configure.ac:
If we have libraw1394 >= 1.2.1, then we need libiec61883.
Original commit message from CVS:
* gst/id3demux/id3v2frames.c: (id3demux_id3v2_parse_frame),
(scan_encoded_string), (parse_picture_frame):
Extract images from ID3v2 tags (APIC frames). Fixes#339704.
* configure.ac:
Require core >= 0.10.8 (for GST_TAG_IMAGE and
GST_TAG_PPEVIEW_IMAGE used in the patch above).
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis dot com>
* configure.ac:
We should use $SED and not $(SED) in configure.ac (#343678).
Original commit message from CVS:
2006-06-07 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* configure.ac:
We now require libraw1394 >= 1.1.0 and that version onwards all
have .pc files.
Original commit message from CVS:
2006-05-31 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* configure.ac:
Detect libiec61883 and set necessary CFLAGS and LIBS for dv1394.
* ext/raw1394/Makefile.am:
Add CFLAGS.
* ext/raw1394/gstdv1394src.c: (gst_dv1394src_iec61883_receive),
New method, to receive using libiec61883.
(gst_dv1394src_iso_receive),
#ifdef'd out if libiec61883 is present.
(gst_dv1394src_bus_reset),
Get userdata correctly if using libiec61883.
(gst_dv1394src_create),
When using libiec61883, only poll one fd and no need to read.
(gst_dv1394src_discover_avc_node),
Replace g_warnings.
(gst_dv1394src_start),
Create new handle when we know which dv port. More reliable
than setting port on an existing handle. Initialise libiec61883.
(gst_dv1394src_stop):
If using libiec61883, then cleanup its handle properly.
* ext/raw1394/gstdv1394src.h:
Add libiec61883 handle.
Original commit message from CVS:
* configure.ac:
figure out where plugins-base plugins are
* tests/check/Makefile.am:
use plugins-base plugins, so we have typefind functions
* tests/check/elements/id3v2mux.c: (test_taglib_id3mux_with_tags):
increase num-buffers, this makes sure the test errors out instead
of timing out when no typefind functions are present
