Earlier, the plugin was ignoring those settings and blindly setting
buffer-time to 2 seconds and latency-time to 200ms, which forced all
pipelines to have a minimum latency of 200ms + sink latency.
The values of segsize and segtotal were also not derived correctly.
Now we obey these values, and you can get close to the previous
behaviour by setting buffer-time and latency-time manually. Note that
they are set in microseconds.
As a consequence, when we haven't received enough data from the
device, we now sleep for a time proportional to the data remaining.
However, Directsound is a deprecated API so it maintains its own
software ringbuffer which updates at arbitrary intervals. Hence we
might have to wait a full segsize to get the last 10% of data. To
avoid tight loops, we clamp our sleep floor at 10ms.
In my testing, this keeps the wakeups not-too-high (proportional to
the latency-time set on the source). Further improvements should be
made by fixing the WASAPI audio source plugin instead of this.
Directsound is deprecated and as the comments explain, it is
impossible to get low latency, decent quality, or good performance
from it.
Based on a patch by Sebastian Dröge <sebastian@centricular.com>
https://bugzilla.gnome.org/show_bug.cgi?id=781249
The allowed live seek ranges returned by subclasses are "inclusive", that is
to say that the "range_stop" value they return is the highest acceptable position
one can seek to (i.e. "now").
Allow seeking to exactly that value
This reverts commit 845832263b.
The commit broke cross-mingw CI:
https://ci.gstreamer.net/job/GStreamer-master/8659/console
It seems that cross-mingw on Autotools and native-mingw on Meson
disagree about the size of HRESULT. Revert for now till I can
investigate the Meson side of things some more.
MinGW does not provide comsupp.lib, so there's no implementation of
_com_util::ConvertBSTRToString. Use a fallback implementation that
uses wcstombs() instead.
On MinGW we also truncate the name to 100 chars which should be fine.
The QTKit framework had been deprecated for long in favour of AVFundation
framework and we already have avfvideosrc that provides the same
functionality.
https://bugzilla.gnome.org/show_bug.cgi?id=782078
MediaCodec gives us a presentation timestamp of 0 if it does not know
anything, but GStreamer gives us GST_CLOCK_TIME_NONE. Don't mix up these
two.
https://bugzilla.gnome.org/show_bug.cgi?id=780190
A common subtitling use case is live-generated subtitles, in which each
new word is contained in its own span, and the spans are displayed
sequentially, with the effect that lines of displayed subtitles are
built up word-by-word.
This can, however, cause problems when the number of words in a block is
greater than the number of allowed GstMemorys in a GstBuffer.
Since in this use case each span will have the same styling as adjacent
spans, we can join adjacent spans (and other inline elements, such as
breaks) into a single element containing the concatenated text of each,
thus avoiding the limit of GstMemorys in a GstBuffer and also reducing
the amount of styling/layout metadata that is attached to each buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=781725
The parser stores the text from each inline element of a scene in its
own GstMemory, which is inserted in the GstBuffer containing the scene
data. However, GstBuffers can contain only a limited number of
GstMemorys. Therefore, don't add more than the maximum number of
GstMemorys to each buffer, and warn if this is attempted.
https://bugzilla.gnome.org/show_bug.cgi?id=781725
When parsing <br> elements, store an actual newline in the text field of
the created TtmlElement. They then don't need to be treated as a
separate case from anon-span elements when being processed.
https://bugzilla.gnome.org/show_bug.cgi?id=781725
Encapsulates in a function the code that warns of an illegally
positioned element, rather than repeating the same code multiple times.
Also frees a string allocated by ttml_get_element_type_string, which was
previously being leaked.
https://bugzilla.gnome.org/show_bug.cgi?id=781725
../subprojects/gst-plugins-bad/ext/smoothstreaming/gstmssdemux.c: In function ‘gst_mss_demux_requires_periodical_playlist_update’:
../subprojects/gst-plugins-bad/ext/smoothstreaming/gstmssdemux.c:729:16: error: unused variable ‘mssdemux’ [-Werror=unused-variable]
GstMssDemux *mssdemux = GST_MSS_DEMUX_CAST (demux);
^~~~~~~~
cc1: all warnings being treated as errors
Rationale is to allow the manifest update task to continue running while
seeks are occurring. Otherwise, if the user reliably performs a seek
before the manifest is updated, then as the manifest task is reset on
seeks (and thus the time to wait between manifest updates), the manifest
would never be updated.
This fix makes the manifest update task free-running and continously
update even during seeks.
Without this, for streams where the content is stored indefinitely and
can be seeked on, the duration would never increase when in paused or,
until we reached near the end of the currently advertised stream (where
the internal fragment parser would see descriptions of new fragments).
The TTML spec has an issue in which tab (U+0009) characters that are
first in a sequence of whitespace characters are not suppressed at the
start and end of line areas. This issue was reported in [1] and the
editor of the TTML specs confirmed that this was not the intention
behind the spec.
The editor has created an issue to fix this in both the TTML1 and TTML2
specs [2], giving a proposal of what the spec should say. This patch
updates ttmlparse to implement the intended behaviour as proposed, in
which tabs in the input are converted to spaces before processing.
[1] https://github.com/w3c/imsc/issues/224
[2] https://github.com/w3c/ttml1/issues/235https://bugzilla.gnome.org/show_bug.cgi?id=781539
If multiple styles/regions with the same ID are present in the input
(which is not allowed in TTML), use the last and give a warning.
Fixes CID #1405134.
This is basically a frame counter provided by the driver and it's
advancing at the speed of the HDMI/SDI input. Having this available on
each buffer allows to know what constant-framerate-based timestamp each
frame is corresponding to and can be used e.g. to write out files
accordingly without having the local pipeline clock timestamps used.
https://bugzilla.gnome.org/show_bug.cgi?id=779213
Clang's static analyser found potential code paths in which variables
were being used in comparisons when uninitialised. Fix by properly
handling out-of-range value returned by gst_ttml_get_element_index.
The previous code was handling both as separate steps and then tried to
combine the results, but this resulted in all kinds of bugs which showed
themselves as failures during seeking and offset tracking getting wrong.
This also showed itself with gst-validate on the sample stream.
The rewritten code now parses everything in one go and tracks the
current offset only once, and as a side effect simplifies the code a
lot.
Also added is detection of SIDX that point to other SIDX instead of
actual media segments, e.g. with this stream:
http://dash.akamaized.net/dash264/TestCases/1a/sony/SNE_DASH_SD_CASE1A_REVISED.mpd
Support for this will have to be added at some point but that should
also be easier with the rewritten code.
https://bugzilla.gnome.org/show_bug.cgi?id=781233
Spec 5.3.9.2 is saying about the existence of duration and SegmentTimeline
only for Representation level. Other level such as Period or AdaptationSet
might not have the attributes.
https://bugzilla.gnome.org/show_bug.cgi?id=780570
Some actions (Qos, reconfigure, ...) might take place before we finish pushing out flush_start.
One problem would be that:
1) The QOS handling in adaptivedemux takes the MANIFEST LOCK
That QOS event comes from basesink with its PREROLL_LOCK taken
2) FLUSH_START is sent from adaptivedemux with the MANIFEST_LOCK taken and the basesink flushing handler needs to take the PREROLL_LOCK
=> deadlock
https://bugzilla.gnome.org/show_bug.cgi?id=781320
