Original commit message from CVS:
* ext/wavpack/gstwavpackparse.c:
(gst_wavpack_parse_handle_seek_event):
Remove old workaround that was needed when seeking after the last
sample. With the fixed error handling this works now as expected
without pushing the last sample although it wasn't requested.
Original commit message from CVS:
* ext/wavpack/gstwavpackparse.c:
(gst_wavpack_parse_handle_seek_event):
Handle segment seeks in the seek event handler, correctly work with
stop position == -1 and instead of stopping the task on seek just
pause it.
Original commit message from CVS:
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_pull_buffer),
(gst_wavpack_parse_create_src_pad),
(gst_wavpack_parse_resync_loop), (gst_wavpack_parse_loop),
(gst_wavpack_parse_chain):
Correctly handle errors, especially in the loop function. Before it
was easy to get the task paused but no error being posted on the bus.
Original commit message from CVS:
* ext/libpng/gstpngdec.c: (gst_pngdec_task):
If we get a fatal flow return in the loop function, first post the
error message and only then send the EOS event downstream, otherwise
applications might get an eos message before the error message and
think everything was ok (related to #429319).
Original commit message from CVS:
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_reset),
(gst_wavpack_dec_init), (gst_wavpack_dec_sink_set_caps),
(gst_wavpack_dec_clip_outgoing_buffer),
(gst_wavpack_dec_post_tags), (gst_wavpack_dec_chain):
* ext/wavpack/gstwavpackdec.h:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_reset),
(gst_wavpack_enc_sink_set_caps), (gst_wavpack_enc_set_wp_config),
(gst_wavpack_enc_chain):
* ext/wavpack/gstwavpackenc.h:
* ext/wavpack/gstwavpackparse.c:
Don't play audioconvert. As wavpack wants/outputs all samples with
width==32 and depth=[1,32] accept this and let audioconvert convert
to accepted formats instead of doing it in the element for n*8 depths.
This also adds support for non-n*8 depths and prevents some useless
memory allocations. Fixes#421598
Also add a workaround for bug #421542 in wavpackenc for now...
* tests/check/elements/wavpackdec.c: (GST_START_TEST):
* tests/check/elements/wavpackenc.c: (GST_START_TEST):
* tests/check/elements/wavpackparse.c: (GST_START_TEST):
Consider the change above in the unit tests and test if the correct
caps are accepted and set. Also check for GST_BUFFER_OFFSET_END in
the wavpackparse unit test.
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_init),
(gst_wavpack_dec_sink_set_caps):
Set caps on the src pad as soon as possible.
* ext/wavpack/gstwavpackdec.h:
* ext/wavpack/gstwavpackcommon.h:
* ext/wavpack/gstwavpackenc.h:
* ext/wavpack/gstwavpackparse.h:
Fix indention. gst-indent is now called by cicl.
Original commit message from CVS:
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_plugin_init):
Revert last commit, preventing infinite plugging loops with ranks
is no clean solution and in general there's no reason why one wants
to parse framed wavpack data again.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_push_block):
Send the new segment event in time format instead of bytes. This
allows "wavpackenc ! wavpackdec ! someaudiosink" pipelines.
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_plugin_init):
Accept framed and non-framed input, wavpackparse doesn't care. To
prevent "wavpackparse ! wavpackparse ! ..." pipelines lower the
rank of wavpackparse by one. This allows "wavpackenc ! wavpackparse !
..." pipelines.
Original commit message from CVS:
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_chain):
Revert to use gst_pad_alloc_buffer() here. We can and should use it.
Thanks to Jan and Mike for noticing my mistake.
Original commit message from CVS:
Patch by: Christophe Dehais <christophe dot dehais at gmail dot com>
* ext/gconf/gconf.c: (gst_gconf_render_bin_with_default):
Accept complex pipeline descriptions as an audio profile instead of just
a single element. Fixes#420658.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_class_init),
(gst_wavpack_enc_init), (gst_wavpack_enc_chain),
(gst_wavpack_enc_rewrite_first_block):
* ext/wavpack/gstwavpackenc.h:
Put the write helpers into the GstWavpackEnc struct directly and not
as a pointer to save two small, but useless mallocs. This also makes
it possible to drop the finalize method.
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_push_buffer):
For consistency reasons also set GST_BUFFER_OFFSET_END on the outgoing
buffers the same way wavpackenc does it.
Original commit message from CVS:
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_chain):
Don't use gst_pad_alloc_buffer() as we might clip the buffer later and
BaseTransform-based elements will likely break because of wrong
unit-size. Also plug a possible memleak that happens when decoding
fails for some reason.
Original commit message from CVS:
* ext/dv/gstdvdec.c: (gst_dvdec_init), (gst_dvdec_sink_setcaps),
(gst_dvdec_src_negotiate), (gst_dvdec_chain),
(gst_dvdec_change_state):
* ext/dv/gstdvdec.h:
Infer pixel-aspect-ratio from the video frame format if it isn't
provided by the container, as happens when playing DV from AVI
or Quicktime containers.
Patch by: Wim Taymans <wim@fluendo.com>
Fixes#380944
Original commit message from CVS:
* ext/raw1394/gstdv1394src.c: (gst_dv1394src_start):
Free handles that we allocated when exiting via the error paths.
Original commit message from CVS:
* ext/wavpack/gstwavpack.c: (plugin_init):
* ext/wavpack/gstwavpackcommon.c:
Use a general wavpack debug category for common code.
* ext/wavpack/gstwavpackstreamreader.c:
(gst_wavpack_stream_reader_set_pos_abs),
(gst_wavpack_stream_reader_set_pos_rel),
(gst_wavpack_stream_reader_write_bytes):
Use the general wavpack debug category here too and add debug
output to the functions that should not be called at all by
the wavpack library.
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_plugin_init):
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_plugin_init):
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_plugin_init):
Change debugging category names to conform to the conventions.
Original commit message from CVS:
* ext/gconf/gstswitchsink.c: (gst_switch_sink_dispose),
(gst_switch_commit_new_kid):
Fix up the dispose logic so it doesn't leak, and fix setting of
the child state so that we don't set a child to our current state
just as we are changing it to something else.
Original commit message from CVS:
* ext/gconf/gstswitchsink.c: (gst_switch_sink_dispose),
(gst_switch_commit_new_kid):
Fix up the reference counting of the child elements.
Original commit message from CVS:
* ext/gconf/gstswitchsink.c: (gst_switch_sink_reset),
(gst_switch_commit_new_kid), (gst_switch_sink_set_child):
Install fakesink in NULL by fixing some broken logic. This obviates
the need to manually set _IS_SINK.
Add some comments and remove a little cruft while I'm at it.
Original commit message from CVS:
* ext/gconf/gstswitchsink.c: (gst_switch_sink_reset):
Mark us as a sink when we have no fakesink in NULL. Fixes#414887.
Original commit message from CVS:
* ext/cdio/gstcdiocddasrc.c: (gst_cdio_cdda_src_open),
(gst_cdio_cdda_src_finalize):
Make sure we always destroy our libcdio handle.
Original commit message from CVS:
* ext/dv/gstdvdec.c: (gst_dvdec_init):
Use gst_pad_new_from_static_template instead of
static_pad_template_get+pad_new.
Original commit message from CVS:
Patch by: Loïc Minier <lool+gnome at via ecp fr>
* ext/libcaca/Makefile.am:
* gst/debug/Makefile.am:
Don't mix tabs and spaces (#414168).
Original commit message from CVS:
* ext/cdio/gstcdiocddasrc.c: (gst_cdio_cdda_src_probe_devices),
(gst_cdio_cdda_src_read_sector), (gst_cdio_cdda_src_open),
(gst_cdio_cdda_src_finalize):
Small code cleanups.
Don't use pad_alloc as the base class cannot deal with the error codes.
Original commit message from CVS:
* ext/hal/gsthalaudiosink.c: (do_toggle_element):
* ext/hal/gsthalaudiosrc.c: (do_toggle_element):
Having NULL as UDI previously selected the default sink/src. Change
this back but mention it in the debug output.
* ext/hal/hal.c: (gst_hal_get_alsa_element),
(gst_hal_get_oss_element), (gst_hal_get_string),
(gst_hal_render_bin_from_udi), (gst_hal_get_audio_sink),
(gst_hal_get_audio_src):
* ext/hal/hal.h:
Refactor a bit, check all error conditions, greatly improve debugging
and fix some possible memory leaks. Also implement OSS support
and allow specifying an UDI that points to a real device. For this the
child device which supports ALSA (preferred) or OSS is used.
As a side effect this makes it impossible now to get a alsasink in
halaudiosrc and a alsasrc in halaudiosink.
Original commit message from CVS:
* ext/hal/gsthalaudiosink.c: (do_toggle_element):
* ext/hal/gsthalaudiosrc.c: (do_toggle_element):
Check if the device UDI is set before trying to query HAL
about it and give a useful error message if it wasn't set.
* ext/hal/hal.c: (gst_hal_get_string):
Don't query HAL for NULL UDIs. Passing NULL as UDI to HAL
gives an assertion failure in D-Bus when running with
DBUS_FATAL_WARNINGS=1.
Original commit message from CVS:
* ext/shout2/gstshout2.c: (gst_shout2send_class_init),
(gst_shout2send_init), (gst_shout2send_start),
(gst_shout2send_set_property), (gst_shout2send_get_property):
* ext/shout2/gstshout2.h:
Add a property for username.
Original commit message from CVS:
* ext/gconf/gstgconfaudiosink.c: (gst_gconf_audio_sink_reset),
(do_change_child):
Don't reset the profile when going switching states, as it makes
the element non-reusable.
Original commit message from CVS:
* ext/gconf/Makefile.am:
* ext/gconf/gconf.c: (gst_gconf_get_string),
(gst_gconf_get_key_for_sink_profile), (gst_gconf_set_string),
(gst_gconf_render_bin_with_default):
* ext/gconf/gconf.h:
* ext/gconf/gstgconfaudiosink.c: (gst_gconf_audio_sink_base_init),
(gst_gconf_audio_sink_reset), (gst_gconf_audio_sink_init),
(gst_gconf_audio_sink_dispose), (do_change_child),
(gst_gconf_switch_profile), (gst_gconf_audio_sink_set_property),
(cb_change_child), (gst_gconf_audio_sink_change_state):
* ext/gconf/gstgconfaudiosink.h:
* ext/gconf/gstswitchsink.c: (gst_switch_sink_base_init),
(gst_switch_sink_class_init), (gst_switch_sink_reset),
(gst_switch_sink_init), (gst_switch_sink_dispose),
(gst_switch_commit_new_kid), (gst_switch_sink_set_child),
(gst_switch_sink_set_property), (gst_switch_sink_handle_event),
(gst_switch_sink_get_property), (gst_switch_sink_change_state):
* ext/gconf/gstswitchsink.h:
* gst/autodetect/gstautoaudiosink.c:
(gst_auto_audio_sink_class_init), (gst_auto_audio_sink_dispose),
(gst_auto_audio_sink_clear_kid), (gst_auto_audio_sink_reset),
(gst_auto_audio_sink_detect):
* gst/autodetect/gstautovideosink.c:
(gst_auto_video_sink_class_init), (gst_auto_video_sink_dispose),
(gst_auto_video_sink_clear_kid), (gst_auto_video_sink_reset),
(gst_auto_video_sink_detect):
Re-factor the gconfaudiosink into a "GstSwitchSink" base class
and a child that implements the GConf key monitoring. The end goal of
this is an audio sink that can be changed on the fly, but at the
moment it still only changes on the next READY transition.
Original commit message from CVS:
* ext/hal/hal.c: (gst_hal_get_string):
* ext/hal/hal.h:
Some small cleanups; deal with errors when parsing the HAL ALSA
capabilities a bit better.
Original commit message from CVS:
* ext/gconf/gconf.c: (gst_gconf_get_key_for_sink_profile),
(gst_gconf_render_bin_from_key),
(gst_gconf_get_default_audio_sink):
* ext/gconf/gconf.h:
* ext/gconf/gstgconfaudiosink.c: (get_gconf_key_for_profile),
(do_toggle_element), (gst_gconf_audio_sink_set_property),
(gst_gconf_audio_sink_get_property):
In gconfaudiosink, get the right key as the old key in do_toggle
(ie. one dependent on the profile selected). Log some more stuff so
we can see what's actually going on.
Original commit message from CVS:
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_src_query),
(gst_wavpack_parse_handle_seek_event),
(gst_wavpack_parse_create_src_pad):
Fix a off by one that leads to the duration reported as one
sample less than it is
Original commit message from CVS:
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_src_query):
Fix the SEEKING query. We can seek if we are in pull mode, not the
other way around. Also set the correct format in the seeking query and
handle the case where the headers are not read yet and we can't say
anything about our seeking capabilities.
Original commit message from CVS:
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_base_init):
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_base_init):
Fix spelling in 2 places: It's called Wavpack, not WavePack.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo@circular-chaos.org>
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_mode_get_type),
(gst_wavpack_enc_correction_mode_get_type),
(gst_wavpack_enc_joint_stereo_mode_get_type):
Minor clean-up: use enum values instead of hardcoded constants (#395536).
Original commit message from CVS:
Patch by: Vincent Torri <vtorri at univ-evry fr>
* ext/jpeg/gstjpegdec.c:
* ext/jpeg/gstjpegenc.c:
* ext/jpeg/smokecodec.c:
These libjpeg callbacks should return a 'boolean' (unsigned char
apparently) and not a 'gboolean' (which maps to gint). Fixes
warnings when compiling with MingW (#393427).
* gst/rtsp/rtspconnection.c: (rtsp_connection_read):
Use ioctlsocket on win32.
* gst/udp/gstudpsrc.c: (gst_udpsrc_create):
Some printf format fixes for win32.
Original commit message from CVS:
* ext/esd/esdsink.c: (gst_esdsink_delay):
Don't return bogus values when esd_get_delay() fails for some
reason (#392189).
Original commit message from CVS:
* ext/ladspa/gstsignalprocessor.c: (gst_signal_processor_setcaps),
(gst_signal_processor_event):
Reset flow_state back to _OK after a flush stop so that we exit our
error state after the flush. Fixes#374213
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.h:
Use local copy of md5.h, as it disappeared in recent wavpack
installs.
Patch by: Sebastian Dröge <slomo at ubuntu dot com>
Fixes: #387076
Original commit message from CVS:
* ext/gconf/gstgconfaudiosrc.c: (gst_gconf_audio_src_init),
(gst_gconf_audio_src_dispose), (do_toggle_element):
* ext/gconf/gstgconfaudiosrc.h:
Remove gconf notify hook when the gconfaudiosrc element is
destroyed, otherwise the callback may be called on an
already-destroyed instance and bad things happen. Should fix
#378184.
Also ignore gconf key changes when the source is already running.
Original commit message from CVS:
* ext/taglib/gstid3v2mux.cc:
Don't attempt to write a NULL frame into the ID3 tag set when the
createFrame method returned NULL.
Fixes: #381857
Patch by: Jonathan Matthew <jonathan at 0kaolin wh9 net >
Original commit message from CVS:
* ext/libcaca/gstcacasink.c: (gst_cacasink_class_init):
Fix width and height properties.
* ext/libcaca/gstcacasink.h:
Fix compilation on newer libcaca that require us to include a new
header. Fixes#379918.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo@circular-chaos.org>
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_reset),
(gst_wavpack_dec_init), (gst_wavpack_dec_change_state):
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_base_init),
(gst_wavpack_enc_class_init), (gst_wavpack_enc_reset),
(gst_wavpack_enc_init), (gst_wavpack_enc_set_wp_config),
(gst_wavpack_enc_change_state):
* ext/wavpack/gstwavpackparse.c:
Some small clean-ups: use enums instead of hard-coded numbers,
const-ify element details, re-factor some code into _reset()
functions (#352605).
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo at circular-chaos.org>
* configure.ac:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_mode_get_type),
(gst_wavpack_enc_correction_mode_get_type),
(gst_wavpack_enc_joint_stereo_mode_get_type),
(gst_wavpack_enc_init), (gst_wavpack_enc_set_wp_config):
Fix enum nicks; only emit no-more-pads once; add support for very
fast encoding mode in upcoming 4.40.0 release (#369539).
Original commit message from CVS:
* ext/cdio/gstcdio.c: (gst_cdio_get_cdtext):
* ext/cdio/gstcdio.h:
* ext/cdio/gstcdiocddasrc.c: (gst_cdio_cdda_src_open):
Move CD-TEXT utility function into common file so it can also be
used by a future cdioparanoiasrc.
Original commit message from CVS:
* gst/id3demux/id3v2frames.c: (parse_picture_frame):
We require a -base more recent than 0.10.9, so it's safe to use
GST_TYPE_TAG_IMAGE_TYPE unconditionally now.
* ext/dv/gstdvdec.c: (gst_dvdec_sink_event):
* ext/jpeg/gstjpegdec.c: (gst_jpeg_dec_sink_event):
Use _newsegment_full() now that we depend on a recent enough core.
* gst/wavparse/gstwavparse.c:
Remove cruft that we don't need any longer now that we depend on
a recent enough -base.
Original commit message from CVS:
* ext/speex/gstspeexdec.c: (speex_dec_convert),
(speex_dec_sink_event), (speex_dec_chain_parse_header):
Some small cleanups, use _scale.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_set_wp_config):
* ext/wavpack/gstwavpackparse.c:
(gst_wavpack_parse_create_src_pad):
* gst/nuvdemux/gstnuvdemux.c: (gst_nuv_demux_create_pads):
* tests/check/elements/wavpackparse.c: (wavpackparse_found_pad):
Activate pads before adding them to running element.
Original commit message from CVS:
* ext/speex/gstspeexenc.c: (gst_speexenc_finalize),
(gst_speexenc_set_last_msg), (gst_speexenc_setup),
(gst_speexenc_set_header_on_caps):
Fix some mem leaks.
Original commit message from CVS:
* ext/jpeg/gstjpegdec.c:
Set minimum height to 8 (from 16), our code should handle
that fine. Some of the buttons on the apple trailer site
are apparently only 15 pixels high (see #357470).
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* ext/annodex/gstcmmldec.c: (gst_cmml_dec_chain):
Seeking back in a file containing a CMML stream errors out if the seek
goes back up to the CMML headers. This is because after the seek the xml
processing instruction <?xml ...?> is submitted to the xml parser again,
which results in an error. The attached patch fixes the problem.
Fixes#353908.
* ext/annodex/gstcmmlenc.h:
Fix authors name.
Original commit message from CVS:
2006-08-28 Andy Wingo <wingo@pobox.com>
* ext/raw1394/gstdv1394src.c (gst_dv1394src_from_raw1394handle):
New helper function to lessen the ifdefs.
(GST_INFO_OBJECT):
(gst_dv1394src_iso_receive): Use it.
(gst_dv1394src_create): Also use the control sockets in iec61883
mode.
(gst_dv1394src_start, gst_dv1394src_stop): Always use a separate
handle for AVC operations; fixes#348233.
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* ext/annodex/gstannodex.c: (gst_annodex_granule_to_time):
Do some extra sanity checks.
Fixes#350340.
* ext/annodex/gstcmmlenc.c: (gst_cmml_enc_change_state),
(gst_cmml_enc_parse_tag_head), (gst_cmml_enc_parse_tag_clip),
(gst_cmml_enc_push_clip), (gst_cmml_enc_push):
Check if clip->start_time is valid before adding the clip to the
track list.
Reset enc->preamble going from PAUSED to READY.
Don't use GST_FLOW_UNEXPECTED for wrong usage of the element, it is
only used for EOS.
Only post an error message if we were the one that created the fatal
GstFlowReturn value.
* ext/annodex/gstcmmlutils.c: (gst_cmml_clock_time_from_npt),
(gst_cmml_clock_time_to_granule), (gst_cmml_track_list_has_clip):
Parse the seconds field of the npt-sec time format using %llu rather than
%d and check that the value scaled by GST_SECOND doesn't overflow.
Use guint64(s) to represent the keyindex and keyoffset fields of a granulepos.
Lookup a clip's track with clip->track rather than clip->id which
makes no sense.
Identify a clip by its track and start time and not its xml id.
do some more input checking and make sure we don't do undefined shifts.
* tests/check/elements/cmmldec.c: (setup_cmmldec),
(teardown_cmmldec), (check_output_buffer_is_equal), (push_data),
(cmml_tag_message_pop), (check_headers), (push_clip_full),
(push_clip), (push_empty_clip), (check_output_clip),
(GST_START_TEST), (cmmldec_suite):
* tests/check/elements/cmmlenc.c: (setup_cmmlenc),
(teardown_cmmlenc), (check_output_buffer_is_equal), (push_data),
(check_headers), (push_clip), (check_clip_times), (check_clip),
(check_empty_clip), (GST_START_TEST), (cmmlenc_suite):
Added some more checks.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo at circular-chaos.org>
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_post_tags),
(gst_wavpack_dec_chain):
Post audio codec and average bitrate tags on bus (#344472).
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_base_init),
(gst_wavpack_parse_src_query):
Forward queries in other formats (BYTE format in particular)
upstream; add Sebastian to authors.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_push_block):
Fix mem leak, send newsegment event on correction pad
as well (#352476).
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_base_init):
Restore original author (on Sebastian's request).
* tests/check/Makefile.am:
* tests/check/gst-plugins-bad.supp:
Add (so far empty) suppression file for -bad. Remove
wavpackenc test from VALGRIND_TO_FIX now that the leak
is fixed.
Original commit message from CVS:
* ext/flac/gstflacdec.c: (gst_flac_dec_scan_got_frame),
(gst_flac_dec_write), (gst_flac_dec_loop),
(gst_flac_dec_sink_event), (gst_flac_dec_chain),
(gst_flac_dec_src_query):
* ext/flac/gstflacdec.h:
Make flac-in-ogg work (#352100).
Original commit message from CVS:
* ext/speex/gstspeexdec.c: (speex_dec_chain_parse_comments):
Make metadata extraction actually work.
* ext/speex/gstspeexenc.c: (gst_speexenc_base_init),
(gst_speexenc_init), (gst_speexenc_create_metadata_buffer),
(gst_speexenc_chain):
Fix metadata writing: replace old code which wrote completely
broken tags with libgsttag-based code. Plus miscellaneous
code cleanups (use static pad templates etc.) and a bunch
of leak fixes.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_init),
(gst_wavpack_enc_finalize), (gst_wavpack_enc_sink_set_caps),
(gst_wavpack_enc_set_wp_config), (gst_wavpack_enc_format_samples),
(gst_wavpack_enc_push_block), (gst_wavpack_enc_chain),
(gst_wavpack_enc_rewrite_first_block),
(gst_wavpack_enc_sink_event), (gst_wavpack_enc_change_state),
(gst_wavpack_enc_set_property), (gst_wavpack_enc_get_property):
* ext/wavpack/gstwavpackenc.h:
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_reset),
(gst_wavpack_parse_src_query), (gst_wavpack_parse_src_event),
(gst_wavpack_parse_init), (gst_wavpack_parse_get_upstream_length),
(gst_wavpack_parse_loop):
More clean-ups: use shorter variable names to make code easier to
read; prefix structures we define with 'Gst' to make it clearer
where they come from.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_init),
(gst_wavpack_enc_set_wp_config), (gst_wavpack_enc_push_block),
(gst_wavpack_enc_chain), (gst_wavpack_enc_rewrite_first_block),
(gst_wavpack_enc_sink_event):
Fix caps set on buffers and template caps (output is framed)
and make them match (#351663); use GST_WARNING_OBJECT instead of
GST_ELEMENT_WARNING; simplify push_block(); do some small
clean-ups here and there; fix memleak (#351663).
Original commit message from CVS:
* ext/gdk_pixbuf/pixbufscale.c: (gst_pixbufscale_get_unit_size):
* gst/videobox/gstvideobox.c: (gst_video_box_get_unit_size):
use g_assert in _get_unit_size
Original commit message from CVS:
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/inspect/plugin-audiofxgood.xml:
cleanup -unused.txt to make it useful, add previously missing docs
* ext/Makefile.am:
* ext/esd/esdmon.c:
* ext/esd/esdsink.c:
* ext/esd/gstesd.c: (plugin_init):
reflow to get rid of two external symbols
* gst/audiofxgood/audiofx.c: (plugin_init):
re-add
Original commit message from CVS:
Based on patch by: Sebastian Dröge <slomo at circular-chaos.org>
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_sink_event),
(gst_wavpack_parse_get_upstream_length),
(gst_wavpack_parse_find_marker), (gst_wavpack_parse_resync_loop),
(gst_wavpack_parse_loop), (gst_wavpack_parse_resync_adapter):
Fix resyncing in push mode not stopping re-syncing at embedded
zeroes; skip garbage between frames in pull mode as well if
necessary; use gst_pad_query_peer_duration(); push EOS and
NEWSEGMENT event in right direction (#351659).
Original commit message from CVS:
* ext/dv/gstdvdemux.c: (gst_dvdemux_handle_pull_seek),
(gst_dvdemux_loop), (gst_dvdemux_change_state):
* ext/dv/gstdvdemux.h:
When handling seek requests, don't send the newsegment event from the
calling thread. Instead save it so it can be sent from the streaming
thread.
Original commit message from CVS:
* ext/ladspa/gstladspa.c: (gst_ladspa_base_init):
Convert ' ' into '_'. Try to keep as many characters in the padtemplate
names as possible.
Original commit message from CVS:
* ext/ladspa/gstsignalprocessor.c: (gst_signal_processor_flush),
(gst_signal_processor_do_pushes):
A push() gives away our refcount so we should not use the buffer on the
pen anymore.
Original commit message from CVS:
* configure.ac:
Require CVS of GStreamer core and -base (for
GST_TAG_EXTENDED_COMMENT and gst_tag_parse_extended_comment()).
* ext/taglib/gstid3v2mux.cc:
Write extended comment tags properly (#348762).
* gst/id3demux/id3v2frames.c: (id3demux_id3v2_parse_frame),
(parse_comment_frame):
Extract COMM frames into extended comments, which makes it
easier to properly retain the description bit of the tag
and maintain this information when re-tagging (#348762).
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo at circular-chaos.org>
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_class_init):
* ext/wavpack/gstwavpackparse.c:
(gst_wavpack_parse_resync_adapter), (gst_wavpack_parse_chain):
In push mode, re-sync to next wavpack header if sync is lost
(#351557). Also use hyphens instead of underscores in
GObject property names.
Original commit message from CVS:
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_class_init),
(gst_wavpack_parse_reset), (gst_wavpack_parse_get_src_query_types),
(gst_wavpack_parse_src_query),
(gst_wavpack_parse_handle_seek_event),
(gst_wavpack_parse_sink_event), (gst_wavpack_parse_init),
(gst_wavpack_parse_create_src_pad),
(gst_wavpack_parse_push_buffer), (gst_wavpack_parse_loop),
(gst_wavpack_parse_chain), (gst_wavpack_parse_sink_activate),
(gst_wavpack_parse_sink_activate_pull):
* ext/wavpack/gstwavpackparse.h:
Patch by: Sebastian Dröge <slomo at circular-chaos.org>
Make wavpackparse also work in push-mode (not seekable yet though);
some small clean-ups along the way; add support for SEEKING query
and query types function. (#351495).
Original commit message from CVS:
* ext/jpeg/gstsmokedec.c: (gst_smokedec_chain):
* ext/jpeg/gstsmokeenc.c: (gst_smokeenc_setcaps),
(gst_smokeenc_resync), (gst_smokeenc_chain):
Refuse sink caps in the encoder if width or height is not a
multiple of 16, the encoder does not support that yet; along the
same lines, check the return value of the encoder setup function;
also remove some debug log clutter.
Original commit message from CVS:
2006-08-04 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.h: Add infrastructure for storing
whether a processor can work in place or not, and for keeping
track of its state. Change the FlowReturn instance variable from
"state" to "flow_state", all callers changed.
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_setup)
(gst_signal_processor_start, gst_signal_processor_stop)
(gst_signal_processor_cleanup): New functions to manage the
processor's state.
(gst_signal_processor_setcaps): start() as well as setup() here.
(gst_signal_processor_prepare): Respect CAN_PROCESS_IN_PLACE.
(gst_signal_processor_change_state): Stop and cleanup the
processor as we go to NULL.
* ext/ladspa/gstladspa.c (gst_ladspa_base_init): Reuse buffers if
INPLACE_BROKEN is not set.
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_prepare):
Do the alloc_buffer in bytes, not frames.
Original commit message from CVS:
2006-08-04 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_setcaps)
(gst_signal_processor_prepare)
(gst_signal_processor_update_inputs)
(gst_signal_processor_process, gst_signal_processor_pen_buffer)
(gst_signal_processor_flush)
(gst_signal_processor_sink_activate_push)
(gst_signal_processor_src_activate_pull)
(gst_signal_processor_change_state): Remove the last of the code
that assumes that we process whole buffers at a time. Fix some
debugging. Seems to work now in some cases.
Original commit message from CVS:
2006-08-01 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_process):
Fix nframes-choosing.
(gst_signal_processor_init): Init pending_in and pending_out.
Original commit message from CVS:
2006-08-01 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_init): No
more default sample rate, although we never check that the sample
rate actually gets set. Something for the future.
(gst_signal_processor_setcaps): Some refcount fixes, flow fixes.
(gst_signal_processor_event): Refcount fixen.
(gst_signal_processor_process): Pull the number of frames to
process from the sizes of the buffers in the input pens.
(gst_signal_processor_pen_buffer): Remove an incorrect FIXME :)
(gst_signal_processor_do_pulls): Add an nframes argument, and use
it instead of buffer_frames.
(gst_signal_processor_getrange): Refcount fixen, pass nframes on
to do_pulls.
(gst_signal_processor_chain)
(gst_signal_processor_sink_activate_push)
(gst_signal_processor_src_activate_pull): Refcount fixen.
* ext/ladspa/gstsignalprocessor.h: No more buffer_frames, yay.
Original commit message from CVS:
* ext/ladspa/gstsignalprocessor.c: (gst_signal_processor_setcaps),
(gst_signal_processor_process):
don't query buffer-frames from caps, add lots of debug-log,
try fix for assert (#349189)
Original commit message from CVS:
2006-07-29 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* ext/jpeg/gstsmokeenc.c: (gst_smokeenc_getcaps),
(gst_smokeenc_setcaps), (gst_smokeenc_chain):
Set caps on buffer correctly. Fixes bug #349155.
Original commit message from CVS:
* ext/taglib/gstid3v2mux.cc:
Fix writing of comment frames (should be COMM not TCOM),
is still sub-optimal though, since we don't retain or
extract the comment descriptions properly (#334375,
also see #334375).
Original commit message from CVS:
* ext/taglib/gstid3v2mux.cc:
Handle multiple tags of the same type properly. Re-inject
unparsed ID3v2 frames that we get as binary blobs from
id3demux into the tag again so we don't lose information
when retagging (#334375).
Original commit message from CVS:
* ext/esd/esdsink.c: (gst_esdsink_open),
(gst_esdsink_factory_init):
Prevent libesd from auto-spawning a sound daemon if it
is not already running. Now that we don't do evil stuff
like that any longer we can give esdsink a rank so that
autoaudiosink will try it as well if all other audio
sinks fail (#343051).
Original commit message from CVS:
* ext/esd/README:
Remove, it contains nothing useful anyway.
* ext/esd/esdsink.c: (gst_esdsink_init), (gst_esdsink_prepare),
(gst_esdsink_delay):
Some small clean-ups; use GST_BOILERPLATE etc.
Original commit message from CVS:
Patch by: Alex Lancaster <alexl at users sourceforge net>
* ext/taglib/gstid3v2mux.cc:
Write GST_TAG_ENCODER and GST_TAG_ENCODER_VERSION as
ID3v2 TSSE frames (#347898).
Original commit message from CVS:
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_chain):
Fix caps after previous change to byte order endianness.
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_reset),
(gst_wavpack_parse_sink_event), (gst_wavpack_parse_init),
(gst_wavpack_parse_loop):
* ext/wavpack/gstwavpackparse.h:
Queue incoming events if there's no source pad yet and
send them downstream later when the pad is there.
Original commit message from CVS:
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_init),
(gst_wavpack_dec_format_samples),
(gst_wavpack_dec_clip_outgoing_buffer), (gst_wavpack_dec_chain),
(gst_wavpack_dec_change_state):
* ext/wavpack/gstwavpackdec.h:
Output audio in native byte order (which is also how we get
samples from wavpack); output samples with 21-24 bit depth
with 32 bit width (makes things easier for us).
Original commit message from CVS:
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_base_init),
(gst_wavpack_dec_class_init), (gst_wavpack_dec_init),
(gst_wavpack_dec_finalize), (gst_wavpack_dec_format_samples),
(gst_wavpack_dec_clip_outgoing_buffer), (gst_wavpack_dec_chain),
(gst_wavpack_dec_sink_event), (gst_wavpack_dec_change_state):
* ext/wavpack/gstwavpackdec.h:
More clean-ups: remove most of the disfunctional correction
pad stuff for now, if it ever gets implemented a lot of stuff
will have to be rewritten anyway; redo chain function, move
errors to end, error out instead of g_assert()ing. Also rename
overly long variable 'wavpackdec' to just 'dec'; miscellaneous
other small stuff.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo at circular-chaos.org>
* configure.ac:
Check for wavpack version and define WAVPACK_OLD_API if
necessary.
* ext/wavpack/Makefile.am:
* ext/wavpack/gstwavpackcommon.c: (gst_wavpack_read_header),
(gst_wavpack_read_metadata):
* ext/wavpack/gstwavpackcommon.h:
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_base_init),
(gst_wavpack_dec_class_init), (gst_wavpack_dec_init),
(gst_wavpack_dec_finalize), (gst_wavpack_dec_format_samples),
(gst_wavpack_dec_clip_outgoing_buffer), (gst_wavpack_dec_chain),
(gst_wavpack_dec_sink_event), (gst_wavpack_dec_change_state),
(gst_wavpack_dec_request_new_pad), (gst_wavpack_dec_plugin_init):
* ext/wavpack/gstwavpackdec.h:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_class_init),
(gst_wavpack_enc_init), (gst_wavpack_enc_finalize),
(gst_wavpack_enc_set_wp_config):
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_base_init),
(gst_wavpack_parse_finalize), (gst_wavpack_parse_class_init),
(gst_wavpack_parse_index_get_entry_from_sample),
(gst_wavpack_parse_scan_to_find_sample),
(gst_wavpack_parse_handle_seek_event),
(gst_wavpack_parse_create_src_pad):
* ext/wavpack/gstwavpackstreamreader.c:
* ext/wavpack/gstwavpackstreamreader.h:
Port to new/official wavpack API, don't use API that was exported
in wavpack header files and in the lib but meant to be private, at
least not for recent wavpack versions; misc. 'cleanups' (#347443).
Original commit message from CVS:
* ext/libpng/gstpngdec.c: (gst_pngdec_init), (buffer_clip),
(gst_pngdec_caps_create_and_set), (gst_pngdec_task),
(gst_pngdec_chain), (gst_pngdec_sink_event),
(gst_pngdec_libpng_init), (gst_pngdec_change_state),
(gst_pngdec_sink_activate_push):
* ext/libpng/gstpngdec.h:
Use statically allocated segment instead of leaking.
Various cleanups.
Fix flush and seek handling.
Original commit message from CVS:
* ext/taglib/gstid3v2mux.cc:
Make UTF-8 the default encoding when writing string
tags (before, our UTF-8 strings would automatically
be converted to ISO-8859-1 by taglib and written as
ISO-8859-1 fields if that was possible).
* tests/check/elements/id3v2mux.c: (utf8_string_in_buf),
(test_taglib_id3mux_check_tag_buffer), (identity_cb),
(test_taglib_id3mux_with_tags):
Add test case that makes sure our UTF-8 strings have
actually been written into the tag as UTF-8.
Original commit message from CVS:
* ext/libpng/gstpngdec.c: (gst_pngdec_init), (user_info_callback),
(buffer_clip), (user_end_callback), (gst_pngdec_chain),
(gst_pngdec_sink_event), (gst_pngdec_change_state):
* ext/libpng/gstpngdec.h:
Implement buffer clipping/dropping using GstSegment.
This provides accurate seeking.
Original commit message from CVS:
* ext/jpeg/gstjpegdec.c: (gst_jpeg_dec_chain):
After a failed buffer alloc, we need to abort the jpeg decoding (it
started when parsing headers to figure out how many bytes we need
to request downstream).
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo at circular-chaos org>
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_base_init),
(gst_wavpack_enc_class_init), (gst_wavpack_enc_set_wp_config),
(gst_wavpack_enc_chain), (gst_wavpack_enc_sink_event),
(gst_wavpack_enc_set_property), (gst_wavpack_enc_get_property):
* ext/wavpack/gstwavpackenc.h:
Use bitrate property solely for bitrates and add new
bits-per-sample property for the other stuff. Set duration
to 'unknown' in initial header and resend header with proper
duration on EOS; update Sebastian's e-mail address.
Original commit message from CVS:
* configure.ac:
Check for X before using X_CFLAGS in the check for opengl (#343866).
* ext/musepack/Makefile.am:
* ext/wavpack/Makefile.am:
* gst/speed/Makefile.am:
Add missing GST_LIBS, fixes build on cygwin (#343866).
Original commit message from CVS:
2006-05-31 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* ext/raw1394/gstdv1394src.c: (gst_dv1394src_bus_reset):
Fix bus reset when using libiec61883
Original commit message from CVS:
2006-05-31 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* configure.ac:
Detect libiec61883 and set necessary CFLAGS and LIBS for dv1394.
* ext/raw1394/Makefile.am:
Add CFLAGS.
* ext/raw1394/gstdv1394src.c: (gst_dv1394src_iec61883_receive),
New method, to receive using libiec61883.
(gst_dv1394src_iso_receive),
#ifdef'd out if libiec61883 is present.
(gst_dv1394src_bus_reset),
Get userdata correctly if using libiec61883.
(gst_dv1394src_create),
When using libiec61883, only poll one fd and no need to read.
(gst_dv1394src_discover_avc_node),
Replace g_warnings.
(gst_dv1394src_start),
Create new handle when we know which dv port. More reliable
than setting port on an existing handle. Initialise libiec61883.
(gst_dv1394src_stop):
If using libiec61883, then cleanup its handle properly.
* ext/raw1394/gstdv1394src.h:
Add libiec61883 handle.
Original commit message from CVS:
* ext/jpeg/gstjpegdec.c: (gst_jpeg_dec_finalize),
(gst_jpeg_dec_init), (gst_jpeg_dec_chain),
(gst_jpeg_dec_sink_event), (gst_jpeg_dec_change_state):
* ext/jpeg/gstjpegdec.h:
Clip outgoing buffers according to currently configured segment.
Original commit message from CVS:
* ext/taglib/gstid3v2mux.cc:
Handle writing of track-count or album-volume-count without
track-number or albume-volume-number (in this case the number
will just be set to 0).
* tests/check/elements/id3v2mux.c: (test_taglib_id3mux_check_tags):
It would be nice if we actually checked the values received for
track/album-volume number/count in _check_tags(), rather than
setting them again ...
Original commit message from CVS:
* ext/jpeg/gstjpegdec.c: (gst_jpeg_dec_init),
(gst_jpeg_dec_sink_event):
Abort decompression when receiving FLUSH_STOP. This should avoid
issues when interrupting decoding with flushes.
Original commit message from CVS:
* ext/dv/gstdvdemux.c: (gst_dvdemux_loop):
Implement EOS correctly by either posting
SEGMENT_DONE or pushing an EOS message depending
on the seek type. Fixes#342592
Original commit message from CVS:
* ext/flac/Makefile.am:
* ext/flac/flac_compat.h:
* ext/flac/gstflac.c:
* ext/flac/gstflacdec.c: (gst_flac_dec_init):
* ext/flac/gstflacenc.c:
Remove backwards compatibility cruft for dealing with FLAC API
changes in the 1.0.x series - we require 1.1.1 or newer these days.
Original commit message from CVS:
* ext/jpeg/gstjpegdec.c: (hresamplecpy1),
(gst_jpeg_dec_decode_indirect), (gst_jpeg_dec_chain):
Fix crashes when the horizontal subsampling is 1.
Fixes#342097.
Original commit message from CVS:
Patch by: James "Doc" Livingston <doclivingston gmail com>
* ext/taglib/gsttaglibmux.c: (gst_tag_lib_mux_render_tag):
Merge event tags and tag setter tags correctly (#339918). Also,
don't leak taglist in case of an error.
Original commit message from CVS:
* ext/jpeg/gstjpegdec.c: (gst_jpeg_dec_chain):
Fix crash when outputting debugging information for certain
pictures (always good to use the right struct member for
the number of records in an array).
Original commit message from CVS:
* ext/libpng/gstpngenc.c: (gst_pngenc_chain):
In snapshot mode, we always return GST_FLOW_UNEXPECTED whatever the
return value of gst_pad_push_event().
Original commit message from CVS:
* ext/taglib/gstid3v2mux.cc:
Add support for writing images (APIC frames) into ID3v2
tags (picture type always set to 'other' for now though).
Original commit message from CVS:
* ext/esd/esdsink.c: (gst_esdsink_finalize), (gst_esdsink_getcaps),
(gst_esdsink_open), (gst_esdsink_close):
* ext/esd/esdsink.h:
Move the esd_get_server_info() into gst_esdsink_open() and fail
with a decent error message on errors.
Original commit message from CVS:
* ext/flac/gstflacdec.c: (gst_flac_dec_loop):
* ext/flac/gstflacdec.h:
Handle segment seeks that include the end of the file as stop point
properly: when the decoder hits EOS we want to send a SEGMENT_DONE
message instead of an EOS event in case we're in segment seek
mode (fixes#340699).
Original commit message from CVS:
* ext/cairo/gsttimeoverlay.c: (gst_cairo_time_overlay_transform):
Fix timeoverlay for non-multiple-of-4 widths. This fourcc crap
SUCKS.
Original commit message from CVS:
* ext/taglib/Makefile.am:
* ext/taglib/gstid3v2mux.cc:
* ext/taglib/gstid3v2mux.h:
* ext/taglib/gsttaglib.cc:
* ext/taglib/gsttaglib.h:
Split the actual ID3v2 tag rendering code into
its own subclass.
Original commit message from CVS:
* ext/esd/esdsink.c: (gst_esdsink_prepare), (gst_esdsink_delay):
Always write ESD_BUF_SIZE bytes and use ESD_MAX_WRITE_SIZE as
the size of the ringbuffer. This should fix hangs with older
esd sound servers.
Original commit message from CVS:
* ext/jpeg/gstjpegdec.c: (gst_jpeg_dec_chain):
Source pad has fixed caps. If we don't set this, bad
things happen when the window is resized.
Original commit message from CVS:
2006-04-21 Andy Wingo <wingo@pobox.com>
* ext/dv/gstdv.c (plugin_init): libdv is a marginal decoder, at
best, on big endian systems. Drop its rank in that case. OTOH on
x86 it's quite fine. See changes from today in gst-ffmpeg as well.
Original commit message from CVS:
* ext/flac/gstflacdec.c: (gst_flac_dec_loop),
(gst_flac_dec_handle_seek_event):
Add support for segment seeks (fixes#338290). Also demote
some recurring debug message from DEBUG to LOG level.
Original commit message from CVS:
* ext/gdk_pixbuf/gstgdkpixbuf.c:
Leave JPEG decoding to our jpegdec plugin. gdkpixbufdec cannot
handle MJPEG streams and might be autoplugged for those if the
user doesn't have jpegdec installed (resulting in a cryptic error
message about huffman tables). Better to disable JPEG decoding here
and let the user figure out that she needs to install jpegdec.
Original commit message from CVS:
* ext/gdk_pixbuf/gstgdkpixbuf.c: (gst_gdk_pixbuf_sink_setcaps),
(gst_gdk_pixbuf_class_init), (gst_gdk_pixbuf_init),
(gst_gdk_pixbuf_flush), (gst_gdk_pixbuf_chain):
* ext/gdk_pixbuf/gstgdkpixbuf.h:
Make work with packetised/framed input (e.g. png-in-quicktime). Use
GST_ELEMENT_ERROR when we return GST_FLOW_ERROR. Add some
GST_DEBUG_FUNCPTR here and there. Use GST_LOG for recurring
debug messages. Fix boilerplate macros.
Original commit message from CVS:
* ext/gdk_pixbuf/gstgdkpixbuf.c: (gst_gdk_pixbuf_get_capslist),
(gst_gdk_pixbuf_set_property), (gst_gdk_pixbuf_get_property):
No need to special-case for Gdk-2.0 any longer, we require
Gdk 2.2 or newer; minor clean-ups.
Original commit message from CVS:
* ext/shout2/gstshout2.c: (gst_shout2send_base_init),
(gst_shout2send_class_init), (gst_shout2send_init),
(set_shout_metadata), (gst_shout2send_set_metadata),
(gst_shout2send_event), (gst_shout2send_start),
(gst_shout2send_connect), (gst_shout2send_stop),
(gst_shout2send_render), (gst_shout2send_set_property),
(gst_shout2send_get_property), (gst_shout2send_setcaps),
(plugin_init):
* ext/shout2/gstshout2.h:
* po/POTFILES.in:
Rewrite a bit: use GstBaseSink::start and stop instead of a state
change function; use GST_ELEMENT_ERROR for error reporting, not
g_error() or GST_ERROR(); don't unref caps in setcaps function,
will cause crashes or assertion failures; remove (unused) "sync"
property, basesink already has such a property; misc. other
minor fixes and cleanups.
Original commit message from CVS:
* ext/esd/esdsink.c: (gst_esdsink_open), (gst_esdsink_prepare):
* ext/esd/gstesd.c: (plugin_init):
* po/POTFILES.in:
Add translatable error message for when we cannot
connect to the sound server, as "Cannot open resource
for writing" isn't really an acceptable message to show
to the user in this case.
Original commit message from CVS:
Patch by: Philippe Valembois
* ext/shout2/gstshout2.c: (gst_shout2send_init),
(gst_shout2send_set_metadata), (gst_shout2send_event),
(gst_shout2send_render), (gst_shout2send_change_state):
* ext/shout2/gstshout2.h:
Handle tags being received before the connection to
the server is established properly (see #338636).
Original commit message from CVS:
* ext/shout2/gstshout2.c: (gst_shout2send_render):
Don't crash in case the connection to the server fails:
don't set pointer to NULL by assigning FALSE; error out
properly by using GST_ELEMENT_ERROR and returning
GST_FLOW_ERROR (fixes#338636). Lastly, free connection
before resetting the pointer.
Original commit message from CVS:
* ext/gdk_pixbuf/gstgdkpixbuf.c: (gst_gdk_pixbuf_sink_setcaps),
(gst_gdk_pixbuf_get_capslist), (gst_gdk_pixbuf_sink_getcaps),
(gst_gdk_pixbuf_class_init), (gst_gdk_pixbuf_init),
(gst_gdk_pixbuf_flush), (gst_gdk_pixbuf_sink_event),
(gst_gdk_pixbuf_chain):
Some cleanups.
Added RGBA as a possible output format.
Correctly free the supported mimetypes.
deprecate silent arg, it's not used.
Return result from _alloc_buffer to peer.
Original commit message from CVS:
* ext/libpng/gstpngdec.c: (gst_pngdec_init),
(user_endrow_callback), (user_end_callback),
(gst_pngdec_caps_create_and_set), (gst_pngdec_chain),
(gst_pngdec_sink_setcaps), (gst_pngdec_sink_event),
(gst_pngdec_libpng_clear), (gst_pngdec_change_state):
* ext/libpng/gstpngdec.h:
Handle more than one frame if the content is framed,
like with png-in-quicktime (#331917).
Original commit message from CVS:
* ext/annodex/gstcmmlenc.c: (gst_cmml_enc_set_header_on_caps):
Use copies of header buffers for caps to avoid circular refcounting
problems (as in theoradec, vorbisdec).
* tests/check/elements/cmmldec.c: (GST_START_TEST):
Fix a typo in test that meant it was testing the wrong thing.
* tests/check/elements/cmmlenc.c: (check_headers):
Fix refcount checks now that we use buffer-copies for caps.
Original commit message from CVS:
* ext/annodex/gstcmmlutils.c: (gst_cmml_track_list_del_clip):
Use g_list_delete_link () instead of g_list_remove_link () so that
we free the link as well as the contained data.
Original commit message from CVS:
* ext/flac/gstflacdec.c: (gst_flac_dec_handle_seek_event):
Don't try to seek beyond the end of the file (would
occasionally display error dialogs in totem when seeking
to the end) (#335869). Will still throw an error though
if the file is truncated and the total_samples value in
the stream header is wrong.
Original commit message from CVS:
* ext/flac/gstflacdec.c: (gst_flac_calculate_crc8),
(gst_flac_dec_scan_got_frame), (gst_flac_dec_scan_for_last_block),
(gst_flac_dec_metadata_callback):
* ext/flac/gstflacdec.h:
If the stream header doesn't contain the total number of samples,
search for the last flac frame at the end of the file and calculate
the total duration from that frame's offset (fixes#337609).
Original commit message from CVS:
* ext\jpeg\smokecodec.c:
use of GST_DEBUG instead of DEBUG(a...) for WIN32
* ext\speex\gstspeexenc.c: (gst_speexenc_set_header_on_caps):
move first instruction after all variables declarations
* gst\alpha\gstalpha.c:
* gst\effectv\gstshagadelic.c:
* gst\smpte\paint.c:
* gst\videofilter\gstvideobalance.c:
define M_PI if it's not defined (it's not defined on WIN32)
* gst\cutter\gstcutter.c: (gst_cutter_chain):
* gst\id3demux\id3v2frames.c: (parse_relative_volume_adjustment_two):
* gst\level\gstlevel.c: (gst_level_set_property), (gst_level_transform_ip):
* gst\matroska\matroska-demux.c: (gst_matroska_demux_parse_info),
(gst_matroska_demux_video_caps):
* gst\matroska\matroska-mux.c: (gst_matroska_mux_start), (gst_matroska_mux_finish):
* gst\wavparse\gstwavparse.c: (gst_wavparse_stream_data):
use gst_guint64_to_gdouble for conversions
* gst\goom\filters.c: (setPixelRGB_):
fix a debug which was using undefined variable
* gst\level\gstlevel.c: (gst_level_set_caps), (gst_level_transform_ip):
* gst\matroska\ebml-read.c: (gst_ebml_read_sint):
replace LL suffix with L suffix (LL isn't supported by MSVC6.0)
* win32/vs6:
add vs6 projects files for most of plugins-good
Original commit message from CVS:
From a patch by: Michael Dominic K. <mdk at mdk dot org dot pl>
* ext/dv/gstdvdemux.c: (gst_dvdemux_class_init),
(gst_dvdemux_reset), (gst_dvdemux_src_convert),
(gst_dvdemux_send_event), (gst_dvdemux_flush), (gst_dvdemux_loop),
(gst_dvdemux_sink_activate_pull), (gst_dvdemux_change_state):
* ext/dv/gstdvdemux.h:
Seek in READY patch. Only works for pull based mode.
Fixes#323880
Original commit message from CVS:
* ext/gdk_pixbuf/gstgdkpixbuf.c: (gst_gdk_pixbuf_flush),
(gst_gdk_pixbuf_event):
Fix two crashers: don't unref the same caps twice, and
set pixbuf loader to NULL after freeing it.
Original commit message from CVS:
* ext/speex/gstspeexenc.c: (gst_speexenc_class_init),
(gst_speexenc_finalize), (gst_speexenc_sink_setcaps),
(gst_speexenc_chain):
* ext/speex/gstspeexenc.h:
Don't leak adapter.
A push *always* takes ownership of the buffer, even on
errors.
Small cleanups.
Original commit message from CVS:
* ext/taglib/gsttaglib.cc:
* ext/taglib/gsttaglib.h:
Fix newsegment event handling a bit. We need to
cache the first newsegment event, because we can't
adjust offsets yet when we get it, as we don't
know the size of the tag yet for sure at that point.
Also do some minor cleaning up here and there and add
some debug statements.
Original commit message from CVS:
* ext/taglib/gsttaglib.cc:
We do not want to proxy the caps on the sink pad; our
source pad should have application/x-id3 caps; also,
don't use already-freed strings in debug messages;
finally, adjust buffer offsets on buffers sent out.
Original commit message from CVS:
* ext/flac/gstflacdec.c: (gst_flac_dec_handle_seek_event):
* ext/flac/gstflacdec.h:
* ext/flac/gstflacenc.h:
Spifify a bit.
Fix deadly lock order error in seeking code, STREAM_LOCK
cannot be taken within LOCK and the streaming variables are
protected with the STREAM_LOCK anyway.
Original commit message from CVS:
* ext/jpeg/gstjpegenc.c: (gst_jpegenc_init), (gst_jpegenc_chain):
Don't crash when encoding images where the number of rows isn't
a multiple of 2*DCTSIZE. Add some GST_DEBUG_FUNCPTR.
Original commit message from CVS:
* ext/speex/gstspeexdec.c: (speex_dec_change_state):
* gst/interleave/deinterleave.c: (deinterleave_change_state):
* gst/interleave/interleave.c: (interleave_change_state):
* gst/wavenc/gstwavenc.c: (gst_wavenc_change_state):
More state change function fixes.
Original commit message from CVS:
* ext/esd/esdsink.c: (gst_esdsink_class_init), (gst_esdsink_init),
(gst_esdsink_finalize), (gst_esdsink_getcaps), (gst_esdsink_open),
(gst_esdsink_close), (gst_esdsink_prepare), (gst_esdsink_write),
(gst_esdsink_set_property), (gst_esdsink_get_property):
Some cleanups.
Reset fd to -1 when we close them.
Original commit message from CVS:
Change bus reset handler so it reports useful information such as
whether the device being used connected or disconnected
Original commit message from CVS:
* ext/jpeg/gstjpegdec.c: (gst_jpeg_dec_class_init),
(gst_jpeg_dec_chain), (gst_jpeg_dec_change_state):
* ext/jpeg/gstjpegdec.h:
Fix durations on outgoing buffers after seeking
in MJPEG files (#334083); some minor clean-ups.
Original commit message from CVS:
* ext/taglib/gsttaglib.cc:
Add gtk-doc blurb (unused for the time being); match registered
plugin name to the filename of the plugin (taglibmux => taglib)
Original commit message from CVS:
* ext/taglib/Makefile.am:
* ext/taglib/gsttaglib.cc:
* ext/taglib/gsttaglib.h:
Add support for writing MusicBrainz IDs.
Original commit message from CVS:
2006-03-11 Christophe Fergeau <teuf@gnome.org>
Patch by: Alex Lancaster
* ext/taglib/gsttaglib.cc: fix writing of TPOS tags (album number),
and add support for TCOP (copyright)
Original commit message from CVS:
* ext/dv/gstdvdemux.c: (gst_dvdemux_handle_sink_event),
(gst_dvdemux_convert_segment), (gst_dvdemux_demux_frame):
Handle events in push mode better, can now do non-flushing
seeks in push mode as well.
Original commit message from CVS:
2006-03-06 Julien MOUTTE <julien@moutte.net>
* ext/libpng/gstpngdec.c: (gst_pngdec_caps_create_and_set):
Implement paletted and grayscale png files handling.
(#150363).
Original commit message from CVS:
* ext/speex/gstspeexenc.c: (gst_speexenc_set_header_on_caps),
(gst_speexenc_chain):
fix a tag list assert
follow gst-plugins-base/ext/ogg/README; set OFFSET
and OFFSET_END. Muxes correctly with gst-plugins-base
> 0.9.3
Original commit message from CVS:
* ext/annodex/gstcmmldec.c: (gst_cmml_dec_sink_event),
(gst_cmml_dec_new_buffer), (gst_cmml_dec_parse_preamble),
(gst_cmml_dec_parse_head), (gst_cmml_dec_push_clip):
* ext/annodex/gstcmmlparser.c: (gst_cmml_parser_parse_chunk):
Add a little extra debug. Make the decoder not return NOT_LINKED,
as we want to continue decoding all CMML and emitting tags.
Original commit message from CVS:
2006-02-25 Julien MOUTTE <julien@moutte.net>
* ext/annodex/gstcmmlenc.c: (gst_cmml_enc_push_clip): Fix another
memleak.
Original commit message from CVS:
2006-02-25 Alessandro Decina <alessandro@nnva.org>
* ext/annodex/Makefile.am:
* ext/annodex/gstannodex.c:
* ext/annodex/gstcmmldec.c:
* ext/annodex/gstcmmlenc.c:
* ext/annodex/gstcmmlparser.c:
* ext/annodex/gstcmmlparser.h:
* ext/annodex/gstcmmlutils.c:
* tests/check/elements/cmmldec.c:
* tests/check/elements/cmmlenc.c:
Fix a memleak in gst_cmml_track_list_add_clip.
Handle overflows in clip's start and end times.
Add the "encoded" parameter to cmmldec and cmmlenc caps.
Do not parse junk at the end of a CMML preamble buffer.
Register a libxml error handler to not print stuff on stderr.
Check for bad clip start and end times in the testsuites.
Original commit message from CVS:
2006-02-24 Julien MOUTTE <julien@moutte.net>
* ext/Makefile.am: Disable annodex for now until we figure out
how to make it build.
* ext/gdk_pixbuf/Makefile.am: Note for Thomas :
Add a rule to your checklist : "please try to at least build
what you are going to commit into -good, or if you are too lazy
to do that, please check that the buildbots are not crying because
of your commit."
Original commit message from CVS:
Gdkpixbuf ported from 0.8 to 0.10 by Renato Filho <renato.filho@indt.org.br>. gst_loader and gdkpixbufanimation still need port.
Original commit message from CVS:
* ext/cdio/Makefile.am:
Add GST_BASE_CFLAGS and GST_BASE_LIBS (seems to be
required for Cygwin, see #317048)
* gst/rtp/gstasteriskh263.c:
Cygwin has includes for both the unix network socket API
and the windows API, but only one can be included, so fix
includes to only use one or the other, prefering the unxi
one (#317048).
Original commit message from CVS:
* ext/ladspa/gstsignalprocessor.c: (gst_signal_processor_event),
(gst_signal_processor_process):
Fix compilation of LADPSA. It doesn't seem to work, and isn't
enabled for the build, but it helps me win the feature-count
competitions ooh yeah.
Original commit message from CVS:
* ext/jpeg/gstjpegdec.c: (gst_jpeg_dec_decode_direct),
(gst_jpeg_dec_chain):
Fix invalid memory access for some odd-sized images
(see image contained in quicktime stream in #327083);
use g_malloc() instead of g_alloca().
Original commit message from CVS:
2006-02-07 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* ext/shout2/gstshout2.c: (gst_shout2send_render),
(gst_shout2send_setcaps), (gst_shout2send_change_state):
Make shout2 work for non ogg streams
Original commit message from CVS:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/inspect/plugin-cdio.xml:
Add cdio plugin to docs.
* ext/cdio/gstcdiocddasrc.c:
Add gtk-doc blurb.
* ext/cdio/gstcdio.c:
The plugin is called 'cdio' not 'cddio'.
Original commit message from CVS:
* ext/gconf/gconf.c: (gst_gconf_get_default_audio_sink),
(gst_gconf_get_default_video_sink),
(gst_gconf_get_default_audio_src),
(gst_gconf_get_default_video_src):
* ext/gconf/gconf.h:
* ext/gconf/gstgconfaudiosink.c: (gst_gconf_audio_sink_reset),
(gst_gconf_audio_sink_init), (gst_gconf_audio_sink_dispose),
(do_toggle_element):
* ext/gconf/gstgconfaudiosink.h:
* ext/gconf/gstgconfaudiosrc.c: (gst_gconf_audio_src_reset),
(gst_gconf_audio_src_init), (gst_gconf_audio_src_dispose),
(do_toggle_element):
* ext/gconf/gstgconfaudiosrc.h:
* ext/gconf/gstgconfvideosink.c: (gst_gconf_video_sink_reset),
(gst_gconf_video_sink_init), (gst_gconf_video_sink_dispose),
(do_toggle_element):
* ext/gconf/gstgconfvideosink.h:
* ext/gconf/gstgconfvideosrc.c: (gst_gconf_video_src_reset),
(gst_gconf_video_src_init), (gst_gconf_video_src_dispose),
(do_toggle_element):
* ext/gconf/gstgconfvideosrc.h:
Ignore changing the GConf key to "". Ignore GConf key updates
that don't actually change the string.
For now, ignore the GConf key when the state is > READY, as
it breaks streaming. Sometime it will be nice to bring the
new sink online even mid-stream, by sending NEWSEGMENT info
and possibly prerolling.
(Fixes#326736)
Original commit message from CVS:
* configure.ac:
* ext/gconf/gconf.c: (gst_gconf_render_bin_from_key):
Use new functions from core to render a bin from a
string. Fixes build. Up requirements to core CVS.
Original commit message from CVS:
2006-01-27 Jan Gerber <j@bootlab.org>
Reviewed by: Andy Wingo <wingo@pobox.com>
* ext/dv/gstdvdec.c (gst_dvdec_change_state):
* ext/dv/gstdvdemux.c (gst_dvdemux_change_state):
Call dv_set_error_log (dv_decoder_t *, NULL); after dv_decoder_new
to not have warings flooding stderr. this is the suggested way
also used in dvgrab and kino. (#328336)
Original commit message from CVS:
* configure.ac:
* ext/Makefile.am:
* ext/cdio/Makefile.am:
* ext/cdio/gstcdio.c:
* ext/cdio/gstcdio.h:
* ext/cdio/gstcdiocddasrc.c:
* ext/cdio/gstcdiocddasrc.h:
Port libcdio cdda source, formerly known as cddasrc, now known as
cdiocddasrc (fixes#323327). Should also read CD-TEXT if available,
but that's not tested (fixes#317658).
Original commit message from CVS:
* ext/esd/Makefile.am:
Add $(ESD_CFLAGS), otherwise build will fail for folks
with libesd in a non-standard prefix (#327009).
