Commit graph

383 commits

Author SHA1 Message Date
Nicolas Dufresne
c213b6ea17 nalutils: Improve slightly the error trace
Until now, bound check would simply trace the values and the range. This
enhances the trace by also tracing the name of the variable that was to be set
or read. This is not magically perfect in all cases, but greatly speed the
debugging work. Here's an example before and after this change:

Before: gst_h264_parser_parse_slice_hdr: value not in allowed range. value: 819183, range -87-77
After:  gst_h264_parser_parse_slice_hdr: value for 'slice->slice_qp_delta' not in allowed range. value: 819183, range -87-77
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1356>
2020-06-20 19:47:49 +00:00
Stéphane Cerveau
06f3a0ed2c codecparsers: fix typo in GstH265RegisteredUserData doc
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1303>
2020-05-27 22:43:39 +00:00
Nicolas Dufresne
540c287a73 codecparsers: h264: Only set relevant default weight values
This is minor optimization to avoid setting values we don't need. It also
makes debugging easier since only relevant values a non-zero now.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1238>
2020-05-19 16:57:09 +00:00
Nicolas Dufresne
d062677b3f codecparsers: h264: Fix default ref list size
The default in PPS was not applied properly. The default does not apply for
I-Slice and l1 default only applies for B-Slice.  This fixes the slice values
for num_ref_idx_l0_active_minus1 and num_ref_idx_l1_active_minus1.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1238>
2020-05-19 16:57:09 +00:00
Nicolas Dufresne
90ca8850de h265parse: Ensure parsing ends on start-code + full header
The parser is used all over the place assuming that after calling
gst_h265_parser_identify_nalu(), the start-code found is can also be
identified. In H264 this works, because scan_for_start_code rely on
gst_byte_reader_masked_scan_uint32() that ensures that 1 byte passed the 3
bytes start code is found. But for HEVC, we need two bytes to identify the
following NAL.

This patch will return NO_NAL_END, even if a start code is found in the case
there was not enough bytes. This solution was chosen to maintain backward
compatibility, and reduce complexicity.

Fixes #1287

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1251>
2020-05-07 13:59:33 -04:00
Nicolas Dufresne
80524fb3da h264parser: Removed impossible error case
Same as done for H264, this error was trying to catch the case where we had
a start code without any bytes afterward. This will never happen since the
start code scanner only returns a match if there is one byte after start
code (pattern 0x00000100 / mask 0xffffff00). In H264, once byte is sufficient
to identify the NALU.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1251>
2020-05-07 12:08:36 -04:00
Nicolas Dufresne
dc4c470d75 h264parse: Properly handle 4 bytes start code
This will stop stripping four bytes start code. This was fixed and broken
again as it was causing the a timestamp shift. We now call
gst_base_parse_set_ts_at_offset() with the offset of the first NAL to ensure
that fixing a moderatly broken input stream won't affect the timestamps. We
also fixes the unit test, removing a comment about the stripping behaviour not
being correct.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1251>
2020-05-07 12:08:36 -04:00
Nicolas Dufresne
9029631f75 h265parser: Fix NAL size check for identification
Unlike H264, H265 requires 2 bytes after the start code to allow NAL
identification. This would otherwise report a broken NAL and skip
important data.

Fixes #1287

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1251>
2020-05-07 12:08:36 -04:00
Nicolas Dufresne
4332dc195d h265parser: Removed impossible error case
This error was trying to catch the case where we had a start code without any
bytes afterward. This will never happen since the start code scanner only returns
a match if there is one byte adter start code (pattern 0x00000100 / mask
0xffffff00).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1251>
2020-05-07 12:08:36 -04:00
He Junyan
3be186fe85 libs: parser: h265: Add SCC extension support.
Add support for screen content coding extensions profiles.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1146>
2020-05-05 17:07:41 +00:00
Georg Ottinger
13d55627f0 libs: parser: Adds AV1 parser.
This is the first version of AV1 parser implementation in GStreamer.

A test file is also provied with several test cases. It contains a
test sequence taken from the aom testdata set, with one key and one
inter-frame. The same test sequence has been reencoded to annexb.

testdata is taken from aom testdata (and reencoded for annexb) as well
as handcrafted testcases. Once reference testdata is available, the
testing could be imporved aswell.

Co-author: He Junyan <junyan.he@hotmail.com>
Co-author: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/785>
2020-05-01 19:55:41 +00:00
He Junyan
bd2fb6cbb9 libs: h265parser: Add High throughput scc extensions profiles' IDC.
It is compitable with scc and we use scc's function to identify it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1121>
2020-04-28 13:54:11 +00:00
He Junyan
35bf824b6d libs: h265parser: select extension profile by profile idc.
the old manner does not consider the profile idc. The profile idc should
play an more important role in recognizing the profile than the other
information. And there is no need to mix profiles of different extensions
together to find the closest profile when the bits stream is not standard,
different extensions support different features and should not be mixed.

The correct way should be recognize the extension category by profile idc
firstly, and then find the closest profile.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1121>
2020-04-28 13:54:11 +00:00
He Junyan
f4ddccb08e libs: h265parser: rename the FormatRangeExtensionProfile
FormatRangeExtensionProfile declares the common bits used for not
only format range extensions profiles, but also for several different
h265 extension profiles, such as high throughput, screen content
coding extensions, etc. And So the old name is not proper.
We also rename the get_h265_extension_profile function.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1121>
2020-04-28 13:54:11 +00:00
He Junyan
e99b962c0f libs: h265parser: Fix a bug for getting extension profile.
We should use the traget ExtensionProfile's IDC to check the
profile_compatibility_flag, rather than the profile_idc in the
stream. The old profile_compatibility_flag check always return
true. This causes that profiles with same constraint flags but
different profile_idc can't be recognized correctly. For example,
the screen-extended-main-444 profile is always be recognized as
the high-throughput-444 profile.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1121>
2020-04-28 13:54:11 +00:00
Mathieu Duponchelle
d3be83a26c gsth265parser.h: escape link-like syntax in doc 2020-04-28 00:29:52 +02:00
Seungha Yang
eeb3dd6605 h265parser: Fix some coverity issues
- Remove useless comparison
- Fix invalid memory access

CID: 1461477, 1461476, 1461475, 1461474, 1461279
2020-04-13 12:28:14 +00:00
Seungha Yang
a2f68762b0 h265parser: Add APIs to allow update VPS/SPS/PPS
gst_h265_parser_parse_{vps,sps,pps} APIs were used to parse VPS/SPS/PPS and
also in order to update parser's internal state at once. Meanwhile
gst_h265_parse_{vps,sps,pps} APIs are to parse VPS/SPS/PPS without state update.
This commit introduces new APIs so that only accepted VPS/SPS/PPS by user
can be updated to be used by parser.
2020-04-09 19:33:56 +00:00
Seungha Yang
a61549cbde h264parser: Add APIs to allow update SPS/PPS
gst_h264_parser_parse_{sps,pps} APIs were used to parse SPS/PPS and
also in order to update parser's internal state at once. Meanwhile
gst_h264_parse_{sps,pps} APIs are to parse SPS/PPS without state update.
This commit introduces new APIs so that only accepted SPS/PPS by user
can be updated to be used by parser.
2020-04-09 19:33:56 +00:00
Seungha Yang
1a09251699 h264parser: Parse all SEI payload type even if it's not handled by parser
... so that user can handle it from outside of parser API
2020-04-08 15:39:12 +00:00
Seungha Yang
db1ea18276 h264parser: Add support for creating picture timing SEI
This new method can make it possible to inject timecode meta into
h264 bitstream
2020-04-08 15:39:12 +00:00
Seungha Yang
28ce6c2a40 h264parser: Make GstH264PicTiming self-containing all the syntax information
... and store all parsed values.

We are storing pic_struct_present_flag although it's not part of
this SEI message but GstH264PicTiming includes it to clarify
following syntax values.
In addition to that, by adding CpbDpbDelaysPresentFlag, we don't need to
refer to VUI anymore.
2020-04-08 15:39:12 +00:00
Seungha Yang
c272dd3462 h264parser: Fix some misleading debug messages 2020-04-08 15:39:12 +00:00
Seungha Yang
5a675080c5 h264parser: Fix mismatched argument of declaration and definition 2020-04-08 15:39:12 +00:00
Seungha Yang
ce09ceb106 h265parser: Add a helper method to create SEI nal unit
Add an API to create raw SEI nal unit. This would be useful in case
an user want to create SEI nal data and inject the SEI nal data
into bitstream.
2020-04-02 09:20:11 +00:00
Seungha Yang
a1e8109aa8 h264parser: Add a helper method to create and inject raw SEI data
Add an API to create raw SEI nal unit. This would be useful in case
an user want to create SEI nal data and inject the SEI nal data
into bitstream.
2020-03-30 07:59:10 +00:00
Seungha Yang
f94157c949 nalutils: Introduce NAL writer helper methods
Add helper methods for writing h264 and h265 NAL
2020-03-30 07:59:10 +00:00
Seungha Yang
5f6884a1c0 h264parser: Expose SEI clear function to public
gsth265parser does it already. Although corresponding API of h265parser is
gst_h265_sei_free, _clear suffix is more consistent naming for h264parser
since there are gst_h264_{sps,pps}_clear().
2020-03-30 07:59:10 +00:00
Seungha Yang
e65d06dc6a h265parser: Fix registered user data SEI leak
... and add fix for the SEI data in gst_h265_sei_copy()
2020-03-23 15:21:42 +00:00
Seungha Yang
ef14a032c1 h265parser: Do not allocate too large size of memory for registered user data SEI
Don't be confused by the unit of payload size (i.e., bits and bytes)
Also this need a documentation with Since mark
2020-03-23 15:21:42 +00:00
Seungha Yang
9e429fad3e h264parser: Do not allocate too large size of memory for registered user data SEI
Don't be confused by the unit of payload size (i.e., bits and bytes)
Also this need a documentation with Since mark
2020-03-23 14:11:11 +00:00
Victor Manuel Jaquez Leal
efcabce98e libs: codecparser: add missing unstable api warning
mpeg4 and vp8 parsers didn't show that compilation warning as the
others parsers.
2020-03-16 18:07:54 +01:00
Seungha Yang
353013fcaa h265parser: Store NumDeltaPocs of reference for hardware accelerators
That's the value of NumDeltaPocs[RefRpsIdx] and we might be able to derive
the value from given sps and slice header.
Because well known hardware implementations refer to the value, however,
storing the value makes things easier.

Following is the list of hardware implementations
* DXVA2: ucNumDeltaPocsOfRefRpsIdx
* NVDEC/VDPAU: NumDeltaPocsOfRefRpsIdx
2020-03-07 12:20:03 +09:00
Seungha Yang
959320264a h265parser: Add helper macro for nal type classification
Add some macros to remove code duplication and to make it more readable
2020-03-05 23:22:34 +09:00
Nicolas Dufresne
2b9ffa8f54 h264parser: Add some fixmes
Some of the syntax element do not use the spec name, which makes them harder
to find in the spec.
2020-03-05 03:06:16 +00:00
Yeongjin Jeong
454147d269 vp9parser: Add new API for parsing superframe info
Some elements are using their own implementations for superframe parsing.
To reduce redundant code, we need to add API to the parser.
2020-03-02 01:31:38 +09:00
Jan Schmidt
69ef74d96a h265parser: Skip unused bits in an SEI.
Alternative approach to 18b54f8d34
that skips all bits in a broken SEI correctly.
2020-02-25 09:33:47 +00:00
Stéphane Cerveau
98f8bb4e7e Revert "h265parser: Skip unused SEI bits differently"
This reverts commit 18b54f8d34.
2020-02-25 09:33:47 +00:00
Dylan Yip
0c798c8771 h265parse: Fix offset by one error in pic timing SEI
Offset by one error causes a free/malloc error when parsing pic timing
SEI messages.
2020-02-25 09:33:47 +00:00
Stéphane Cerveau
b481edd745 h264parser: add MDCV and CLL SEI message parsing
Allow to parse SEI message for:
- mastering display colour volume
- Light level infomation

Set to caps if necessary.

Fix #958
2020-01-07 08:55:28 +00:00
Yeongjin Jeong
3f2240498b h265parser: Add simple GstH265Profile/string public utilites
It makes more simplifies the conversion between GstH265Profile and string.
2019-12-20 15:43:55 +00:00
Fuwei Tang
c810b73472 vc1parser : fix a miswrite 2019-11-11 02:12:34 +00:00
Aaron Boxer
6d3429af34 documentation: fixed a heap o' typos 2019-11-05 09:11:25 -05:00
Tim-Philipp Müller
f218ec2794 Remove autotools build system 2019-10-14 13:54:27 +01:00
Philipp Zabel
0cc7d6f093 codecparsers: h264: record pic_order_cnt elements size
Some hardware decoders, for example Hantro G1, have to be told the
size of the pic_order_cnt related syntax elements pic_order_cnt_lsb,
delta_pic_order_cnt_bottom, delta_pic_order_cnt[0], and
delta_pic_order_cnt[1] in bits.
2019-10-12 06:21:20 +02:00
Philipp Zabel
d0d65fa875 codecparsers: h264: record dec_ref_pic_marking() size
Some hardware decoders, for example Hantro G1, have to be told the size
of the dec_ref_pic_marking() syntax element in bits. Record the size so
it can be passed on to the hardware.
2019-10-12 06:21:20 +02:00
Seungha Yang
6f2ab31d10 h265parser: Calculate short term RPS size in slice header
The calculated size of short_term_ref_pic_set is not a part of
HEVC syntax but the value is used by some stateless decoders
(e.g., vaapi, dxva, vdpau and nvdec) for the purpose of skipping
parsing the syntax by the accelerator.
2019-10-12 02:44:35 +00:00
Seungha Yang
29d4db0f8f h265parser: Add H265 slice segment header documentation
Adding brief description for each value.
2019-10-12 02:44:35 +00:00
Seungha Yang
968a3508e1 h264parser: Expose parsed GstH264PPS::pic_scaling_matrix_present_flag 2019-10-11 19:43:22 +00:00
Seungha Yang
093caa8431 h264parser: Expose all parsed flags of slice header
Add num_ref_idx_active_override_flag and sp_for_switch_flag to
member of GstH264SliceHdr. No reason to hiding them and
some decoder implementations (e.g., DXVA) rely on externally parsed header
data which can be provided by h264parser.
2019-10-11 19:43:22 +00:00