The g-i stuff for this helper lib was never usable from bindings
anyway and there are problems with the latest gobject-introspection,
so we might just as well remove the g-i integration entirely for
this lib.
And monitor no_more_pads.
With live sources such as rtsp, uridecodebin only creates its
child decodebins between PAUSED and PLAYING.
This means that the ASYNC_DONE it posts when getting NO_PREROLL
in its change_state method gets immediately propagated by the
GstBin parent class, as opposed to a situation where a
decodebin has been added to it already, and has posted ASYNC_START.
The proposed solution, instead of simply waiting for ASYNC_DONE,
and finishing prematurely in that case, waits for three conditions
to be true:
* the uridecodebin needs to have emitted no_more_pads
* its current state must be PAUSED if not live, PLAYING otherwise
* There must be no "pending subtitle pads", ie pads where we haven't
received tags yet.
All these conditions are checked in the message handler, as we
post custom messages on it when we get subtitle tags or no_more_pads.
https://bugzilla.gnome.org/show_bug.cgi?id=783257
When the input is TRICKMODE_KEY_UNITS, we expect to only receive keyframes
which we want to decode/push immediately. Therefore don't queue them.
If upstream didn't send just keyframes (which is the ideal situation), two
different things can happen:
1) Either the subclass checks the segment flags and properly configures
the decoder implementation to only decode/output keyframes,
2) Or the subclass really decodes and outputs everything, in which case
the reverse frames will end up arriving "late" downstream (and will
be dropped). If upstream did properly send GOP in reverse order, we
still end up just showing keyframes (but at the overhead of decoding
everything).
https://bugzilla.gnome.org/show_bug.cgi?id=777094
Always put multiview-caps onto the output caps, assuming
mono if we've got no other information. It's still easy for
downstream elements to override using a capssetter or event
probe if desired.
https://bugzilla.gnome.org/show_bug.cgi?id=776172
Child streams could have more accurate width/height or various other
information added. If they have the same name, they are likely to be the
same streams.
https://bugzilla.gnome.org/show_bug.cgi?id=782697
This is now needed as GstClock does not do that internally anymore,
because that broke bindings.
And mark the function correctly as (transfer full), which it already was
before.
https://bugzilla.gnome.org/show_bug.cgi?id=743062
Performing a gst_sdp_media_get_caps_from_media() would result in
changing fields in the GstSDPMedia violating the const tag in the
function declaration.
Before there would be a line with a=rtpmap:96 VP8/90000
after, that attribute would only contain a=rtpmap:96
Fix by performing modifications on duplicated strings instead of on
the internal values.
Also add a simple test for checking that the representation doesn't
change by a gst_sdp_media_get_caps_from_media()
The GSource for dealing with timeouts in
gst_video_convert_sample_async() might be attached to a non-default
context, so we should not be using g_source_remove() on the returned ID.
The correct thing to do is to keep a reference to the actual GSource and
then call g_source_destroy() on it.
https://bugzilla.gnome.org/show_bug.cgi?id=780297
Track how long it takes to generate the first buffer after a flush
as a simple measure of how efficient the decoder is at skipping /
rushing to get to the first decode.
When initializing a timecode from a GDateTime, and the remaining time
until the new second is less than half a frame (according to the given
frame rate), it would lead to the creation of an invalid timecode, e.g.
00:00:00:25 (at 25 fps) instead of 00:00:01:00. Fixed.
https://bugzilla.gnome.org/show_bug.cgi?id=779866
Use G_GUINT64_FORMAT for guint64 values.
Introduced by fcb63e77a9
Found by Alexander Larsson
gstvideodecoder.c: In function 'gst_video_decoder_have_frame':
gstvideodecoder.c:3312:51: error: format '%u' expects argument of type 'unsigned int', but argument 8 has type 'guint64 {aka long long unsigned int}' [-Werror=format=]
Don't guess a timestamp of the start of the segment when running
in reverse mode, as more likely it means we're discontinuous somewhere
in the middle of the segment, and we'll fix up timestamps once
the frames are decoded and reversed.
When a PTS is not set, we still want to store the rest of the
buffer information, or else we lose important things like the
duration or buffer flags when parsing.
This adds a property to select the maximum number of threads to use for
conversion and scaling. During processing, each plane is split into
an equal number of consecutive lines that are then processed by each
thread.
During tests, this gave up to 1.8x speedup with 2 threads and up to 3.2x
speedup with 4 threads when converting e.g. 1080p to 4k in v210.
https://bugzilla.gnome.org/show_bug.cgi?id=778974
In gst_video_time_code_is_valid, also check for invalid
ranges when using drop-frame TC. Refactor some code which
broke after the check was added.
https://bugzilla.gnome.org/show_bug.cgi?id=779010
It was taking the initial input y-offset from the output value, which
only works for y=0 (in which case both are the same). If y > 0, we would
always stay behind the requested input offset and never ever read
anything from the input.
The parser might do some conversion on a stream but the stream keeps
being the same, and we need to make sure GstDiscoverer detects it is the
case.
https://bugzilla.gnome.org/show_bug.cgi?id=778298
There was already a check for that, but it failed because
subformat_guid[0] is a guint32 and that is then casted implicitely to a
guint16 when recursing... just that we checked the uncasted value.
This caused an infinite recursion and thus stack overflow.
https://bugzilla.gnome.org/show_bug.cgi?id=777265
Sometimes there is a human-oriented timecode that represents an
interval between two other timecodes. It corresponds to the human
perception of "add X hours" or "add X seconds" to a specific timecode,
taking drop-frame oddities into account. This interval-representing
timecode is now a GstVideoTimeCodeInterval. Also added function to add it to
a GstVideoTimeCode.
https://bugzilla.gnome.org/show_bug.cgi?id=776447
It is often usefull to make sure that you get a full copy of a profile.
For example you want to let the user modify it in the user interface
but still keep an unchanged version for later use.
API:
gst_encoding_profile_copy
Initialize min and max _get_property() to gets rid of these
compiler warnings:
gstappsrc.c:741:7: error: 'max' may be used uninitialized in this function
g_value_set_int64 (value, max);
^
gstappsrc.c:733:7: error: 'min' may be used uninitialized in this function
g_value_set_int64 (value, min);
^
Which happens because gcc doesn't know that GST_IS_APP_SRC will never
fail here.
https://bugzilla.gnome.org/show_bug.cgi?id=752052
This way special characters such as '@' can be used in
usernames or passwords, e.g.
rtsp://view:%40dm%4An@<IP-ADDR>/media/camera1
will now parse username and password into:
User: view
Pass: @dm:n
https://bugzilla.gnome.org/show_bug.cgi?id=758389
When parsing NUL-terminated strings, do not include the terminating
NUL byte(s). Depending on the encoding used, either g_utf8_validate()
failed due to this, or worse the call to g_utf16_to_utf8() would
return 0 items read on an empty string, causing it to fail parsing
certain frames.
https://bugzilla.gnome.org/show_bug.cgi?id=770355
