It is a requirement from VA-API specification that the VA context got
from vaCreateContext(), for decoding purposes, binds the supplied set
of VA surfaces. This means that if the set of VA surfaces is to be
changed for the current decode session, then the VA context needs to
be recreated with the new set of VA surfaces.
Complement fix committed as e95a42e.
The H.264 AVC standard has to say: if the field is part of a reference
frame or a complementary reference field pair, and the other field of
the same reference frame or complementary reference field pair is also
marked as "used for long-term reference", the reference frame or
complementary reference field pair is also marked as "used for long-term
reference" and assigned LongTermFrameIdx equal to long_term_frame_idx.
This fixes decoding of MR9_BT_B in strict mode.
https://bugs.freedesktop.org/show_bug.cgi?id=64624https://bugzilla.gnome.org/show_bug.cgi?id=724518
Request the correct chroma format for decoding grayscale streams.
i.e. make lookups of the VA chroma format more generic, thus possibly
supporting more formats in the future.
This means that, if a VA driver doesn't support grayscale formats,
it is now going to fail. We cannot safely assume that maybe grayscale
was implemented on top of some YUV 4:2:0 with the chroma components
all set to 0x80.
Fix reference picture marking process with memory_management_control_op
set to 3 and 6, i.e. assign LongTermFrameIdx to a short-term reference
picture, or the current picture.
This fixes decoding of FRExt_MMCO4_Sony_B.
https://bugs.freedesktop.org/show_bug.cgi?id=64624https://bugzilla.gnome.org/show_bug.cgi?id=724518
[squashed, edited to use GST_VAAPI_PICTURE_IS_COMPLETE() macro]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
The initialization of reference picture lists (8.2.4.2) applies to all
slices. So, the RefPicList0/1 lists need to be constructed prior to
each slice submission to the HW decoder.
This fixes decoding of video sequences where frames are encoded with
multiple slices of different types, e.g. 4 slices in this order I, P,
I, and P. More precisely, CABAST3_Sony_E and CABASTBR3_Sony_B.
https://bugzilla.gnome.org/show_bug.cgi?id=724518
When NAL units of type 13 (SPS extension) or type 19 (auxiliary slice)
are present in a video, decoders shall perform the (optional) decoding
process specified for these NAL units or shall ignore them (7.4.1).
Implement option 2 (skip) for now, as alpha composition is not
supported yet during the decoding process.
This fixes decoding of the primary coded video in alphaconformanceG.
https://bugzilla.gnome.org/show_bug.cgi?id=703928https://bugzilla.gnome.org/show_bug.cgi?id=728869https://bugzilla.gnome.org/show_bug.cgi?id=724518
[skip NAL units earlier, i.e. at parsing time]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
When MVC slice NAL units (coded slice extension and prefix NAL) are
present, the number of NAL header bytes is 3, not 1 as usual.
Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
At the time the first VCL NAL unit of a primary coded picture is found,
and if that NAL unit was parsed to be an SPS or PPS, then the entries
in the parser may have been overriden. This means that, when the picture
is to be decoded, slice_hdr->pps could point to an invalid (the next)
PPS entry.
So, one way to solve this problem is to not use the parser PPS and
SPS info but rather maintain our own activation chain in the decoder.
https://bugzilla.gnome.org/show_bug.cgi?id=724519https://bugzilla.gnome.org/show_bug.cgi?id=724518
Retain the SEI messages that were parsed from the access unit until we
have completely decoded the current frame. This is done so that we can
peek at that data whenever necessary during decoding. e.g. for exposing
3D stereoscopic information at a later stage.
Fix support for grayscale encoded video clips, and possibly others if
the underlying driver supports the non-YUV 4:2:0 formats. i.e. defer
the decision that a surface with the desired chroma format is not
supported to the actual VA driver implementation.
https://bugzilla.gnome.org/show_bug.cgi?id=728144
Don't force allocation of VA surfaces in YUV 4:2:0 format. Rather, allow
for the upper layer to specify the desired chroma type. If the chroma
type field is not set (or yields zero), then YUV 4:2:0 format is used
by default.
Fix possible bug when a per-segment deblocking filter level value
needs to be set in non-absolute mode, i.e. when the loop filter update
value is negative in delta mode.
Also clamp the resulting filter level value to 0..63 range.
Improve condition to disable the loop filter. The previous heuristic
used to check all filter levels, for all segments. It turns out that
only the base filter_level value defined in the frame header needs
to be checked.
This fixes 00-comprehensive-013.
The gst_h264_parse_parse_sei() function now returns an array of SEI
messages, instead of a single SEI message. Reason: it is allowed to
have several SEI messages packed into a single SEI NAL unit, instead
of multiple NAL units.
Fix parser and decoder state to sync at the right locations. This is
because we could reset the parser state, while the decoder state was
not copied yet, e.g. when parsing several NAL units from multiple frames
whereas the current frame was not decoded yet.
This is a regression brought in by commit 6fe5496.
Fix gstreamer-vaapi includedir for GStreamer 1.2 setups. i.e. use
the pkgconfig version (1.0) instead of the intended API version (1.2).
libgstvaapi1.0-dev and libgstvaapi1.2-dev packages will now conflict,
as would core GStreamer 1.0 and GStreamer 1.2 dev packages anyway.
Add gst_vaapi_get_config_attribute() helper function that takes a
GstVaapiDisplay and the rest of the arguments with VA types. The aim
is to have thread-safe VA helpers by default.
Make sure to configure the encoder with the set of packed headers we
intend to generate and submit. i.e. make selection of packed headers
to submit more robust.
Cache the first compatible GstVaapiProfile found if the encoder is not
configured yet. Next, factor out the code to check for the supported
rate-control modes by moving out vaGetConfigAttributes() to a separate
function, while also making sure that the attribute type is actually
supported by the encoder.
Also fix the default set of supported rate control modes to not the
"none" variant. It's totally useless to expose it at this point.
Introduce GstVaapiContextUsage so that to explicitly determine the
usage of a VA context. This is useful in view to simplifying the
creation of VA context for VPP too.
Unknown attributes, or attributes that are not supported for the given
profile/entrypoint pair have a return value of VA_ATTRIB_NOT_SUPPORTED.
So, return failure in this case.
Move GstVideoOverlayComposition handling to separate source files.
This helps keeing GstVaapiContext core implementation to the bare
minimal, i.e. simpy helpers to create a VA context and handle pool
of associated VA surfaces.
Improve documentation and debug messages. Clean-up APIs, i.e. strip
them down to the minimal set of interfaces. They are private, so no
need expose getters for instance.
Make sure that libgstvaapi private headers remain internally used to
build libgstvaapi libraries only. All header dependencies were reviewed
and checks for IN_LIBGSTVAAPI definition were added accordingly.
Also rename GST_VAAPI_CORE definition to IN_LIBGSTVAAPI_CORE to keep
consistency.
Set a valid GstVideoCodecFrame.system_frame_number when decoding a
stream in standalone mode. While we are at it, improve the debugging
messages to also include that frame number.
When decoding failed, or that the frame was dropped, the associated
surface proxy is not guaranteed to be present. Thus, the GST_DEBUG()
message needs to check whether the proxy is actually present or not.
https://bugzilla.gnome.org/show_bug.cgi?id=722403
[fixed gst_vaapi_surface_proxy_get_surface_id() to return VA_INVALID_ID]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Don't emit NAL HRD parameters for now in the SPS headers because the
SEI buffering_period() and picture_timing() messages are not handled
yet. Some additional changes are necessary to get it right.
https://bugzilla.gnome.org/show_bug.cgi?id=722734
Fix default CPB buffer size to something more reasonable (1500 ms)
and that still fits the level limits. This is a non configurable
property for now. The initial CPB removal delay is also fixed to
750 ms.
https://bugzilla.gnome.org/show_bug.cgi?id=722087
Round down the calculated, or supplied, bitrate (kbps) into a multiple
of the HRD bitrate scale factor. Use a bitrate scale factor of 64 so
that to have less losses in precision. Likewise, don't round up because
that could be a strict constraint imposed by the user.
Fix the level calculation involving bitrate limits. Since we are
targetting NAL HRD conformance, the check against MaxBR from the
Table A-1 limits shall involve cpbBrNalFactor depending on the
active profile.
Submit sequence parameter buffers only once, or when the bitstream
was reconfigured in a way that requires such. Always submit packed
sequence parameter buffers at I-frame period, if the VA driver needs
those.
https://bugzilla.gnome.org/show_bug.cgi?id=722737
Make sure to submit the packed headers only if the underlying VA driver
requires those. Currently, only handle packed sequence and picture
headers.
https://bugzilla.gnome.org/show_bug.cgi?id=722737
The VAEncSequenceParameterBuffer.ip_period value reprents the distance
between the I-frame and the next P-frame. So, this also accounts for
any additional B-frame in the middle of it.
This fixes rate control heuristics for certain VA drivers.
https://bugzilla.gnome.org/show_bug.cgi?id=722735
Fix level characterisation when the bitrate is automatically computed
from the active coding tools. i.e. ensure the bitrate once the profile
is completely characterized but before the level calculation process.
