I copied `error-after` to make the `eos-after` property, but it turned
out there were some problems with that one, so this patch: adds
separate counters (so setting to NULL and reusing the element will
still work); clarifies the properties' min values; and reports an
error when both are set.
Using `num-buffers` can be unpredictable as buffer sizes are often
arbitrary (filesrc, multifilesrc, etc.). The `error-after` property on
`identity` is better but obviously reports an error afterwards. This
adds `eos-after` which does exactly the same thing but reports EOS
instead.
When enabled, this property will make the allocation query fail. This is
the same as one could have done using a tee before the tee started
implementing the allocation query.
https://bugzilla.gnome.org/show_bug.cgi?id=730758
Otherwise we might try unscheduling a clock id (that does not exist
yet), then the streaming thread waits for id and the state change never
continues because the streaming thread is blocked.
Also shutting down and flushing and similar should return FLUSHING, not
EOS. The stream is not over, we're just not accepting any buffers
anymore.
Use more efficient g_object_notify_by_pspec() if we're compiling against
GLib >= 2.26, and also remove work-around for g_object_notify() thread-
safety issues with older GLib versions if it's not needed any more.
Out-of-band events might lead to us calling g_object_notify() from a
non-streaming thread, which can cause crashes if g_object_notify() is
being called from the streaming thread at the same time. See #554460.
Original commit message from CVS:
* plugins/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_init), (gst_identity_check_perfect),
(gst_identity_check_imperfect_timestamp),
(gst_identity_check_imperfect_offset), (gst_identity_transform_ip),
(gst_identity_set_property), (gst_identity_get_property):
* plugins/elements/gstidentity.h:
Separate out check-imperfect-timestamp and check-imperfect-offset.
Put back check-perfect as it was to keep compatibility.
Original commit message from CVS:
2007-03-07 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* plugins/elements/gstidentity.c: (gst_identity_check_perfect),
(gst_identity_start):
* plugins/elements/gstidentity.h:
Emit bus message if check-perfect is true and we encounter a
non-perfect stream between 2 consecutive buffers.
Fixes#415394.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_event), (gst_base_transform_eventfunc):
The event virtual method is now properly implemented, with a default
handler
Sub classes should call the parent_class event method. They should
return FALSE if they had a problem handling the given event, or don't
want GstBaseTransform to send that even downstream
* gst/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_init), (gst_identity_event),
(gst_identity_transform_ip), (gst_identity_set_property),
(gst_identity_get_property):
* gst/elements/gstidentity.h:
Added the single-segment boolean property.
If set to TRUE, it will output a single segment of data, starting from
0, will eat up all incoming newsegment, and modify the timestamp of the
buffers accordingly
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
Original commit message from CVS:
Next big merge.
Added GstBus for mainloop integration.
Added GstMessage for sending notifications on the bus.
Added GstTask as an abstraction for pipeline entry points.
Removed GstThread.
Removed Schedulers.
Simplified GstQueue for multithreaded core.
Made _link threadsafe, removed old capsnego.
Added STREAM_LOCK and PREROLL_LOCK in GstPad.
Added pad blocking functions.
Reworked scheduling functions in GstPad to prepare for
scheduling updates soon.
Moved events out of data stream.
Simplified GstEvent types.
Added return values to push/pull.
Removed clocking from GstElement.
Added prototypes for state change function for next merge.
Removed iterate from bins and state change management.
Fixed some elements, disabled others for now.
Fixed -inspect and -launch.
Added check for GstBus.
Original commit message from CVS:
GST_DEBUG reorganization
This is a big diff (ca 450k), containing loads of stuff:
- gstinfo.[ch] complete rewrite
- changing of all GST_DEBUG messages to reflect that change
- reorganization of subsystem disabling
- addition of gstconfig.h.in so we can track the disablings
- <gst/gst.h> does not include <unistd.h> and <config.h> anymore
- documentation updated for gstinfo stuff (build the docs yourself to know what changed)
- bugfixes for making of the docs (files from CVS are not deleted anymore
- testsuite for debugging changes in testsuite/debug
expect breakage
Original commit message from CVS:
Some small cleanups.
added a drop_probaility arg to identity, so it occasionally can drop buffers
to simulate network packet loss
Original commit message from CVS:
Reparented everything to GstElement, removing GstSrc, GstSink, GstFilter,
and GstConnection. Also fixed a bug in gst_bin_iterate_func.
Original commit message from CVS:
Implemented some test cases... they all fail :-(
Added a flag to identity to for loop_based behaviour.
Added a signal to fakesink when a buffer is consumed.
Original commit message from CVS:
Documentation updates. All standard library objects and standard
elements are documented. Modified some of the elements to more
accuratly report about their arguments so the documentation builds
more reasonable output.
Added aviencoder and jpegencoder elements (not working yet)
