Commit graph

93 commits

Author SHA1 Message Date
Wim Taymans
d14c4c4a67 docs/gst/gstreamer-sections.txt: Add new element field and method.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add new element field and method.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_change_state_func),
(gst_bin_continue_func), (bin_bus_handler),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
Make async state changes a bit smarter by using new ASYNC_START and
ASYNC_DONE messages. This reduces the number of times we run the state
recalculation thread.
Don't change state of element with a pending ASYNC_START message.
Deprecate STATE_DIRTY messages.
* gst/gstelement.c: (gst_element_init), (gst_element_send_event),
(gst_element_get_state_func), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_set_state_func),
(gst_element_change_state):
* gst/gstelement.h:
Keep the state that was last set by the app in a new element field.
Don't allow state changes when handling an element event.
Post ASYNC_START and ASYNC_DONE messages.
Change lost_state so that we go to PAUSED and wait for the parent to set
us to PLAYING again (so latency calculation can be performed)
Export gst_element_change_state() method so that subclasses can use it.
API: gst_element_change_state()
API: GST_STATE_TARGET
* gst/gstpipeline.c: (gst_pipeline_class_init),
(reset_stream_time), (gst_pipeline_change_state),
(gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time):
Using the new ASYNC_START message we can reset the base_time when
needed. This can then be used to implement base_time redistribution in
flushing seeks so that we can remove the explicit seek handling.
Perform latency query and configuration when going to PLAYING.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query), (gst_base_sink_change_state):
Post new ASYNC_START/ASYNC_DONE messages.
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix test because the bin will not set the async element to PLAYING right
away.
* tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST):
Make the message check a little stronger.
Handle ASYNC messages.
* tests/check/pipelines/cleanup.c: (GST_START_TEST):
* tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST):
Expect ASYNC_DONE messages.
2007-03-19 10:47:56 +00:00
Wim Taymans
a25cedb415 docs/design/draft-latency.txt: Small update.
Original commit message from CVS:
* docs/design/draft-latency.txt:
Small update.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_get_latency), (gst_base_sink_query_latency),
(gst_base_sink_wait_clock), (gst_base_sink_send_qos),
(gst_base_sink_perform_qos), (gst_base_sink_queue_object_unlocked),
(gst_base_sink_chain_unlocked), (gst_base_sink_send_event),
(gst_base_sink_get_position), (gst_base_sink_query),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
API: gst_base_sink_query_latency() to let subclasses query the upstream
latency.
API: gst_base_sink_get_latency() to let subclasses query the configured
latency in the sink.
Implement query and set latency.
Update some docs.
As spotted by Will Newton <will dot newton at gmail dot com>: Make sure we
don't continue preroll when we are flushing. Fixes .
* tests/check/pipelines/stress.c: (change_state_timeout),
(quit_timeout), (GST_START_TEST), (stress_suite):
Test for .
2007-02-12 11:32:22 +00:00
Andy Wingo
d87ccbe0f4 tests/check/pipelines/simple-launch-lines.c
Original commit message from CVS:
2007-02-09  Andy Wingo  <wingo@pobox.com>

* tests/check/pipelines/simple-launch-lines.c
(simple_launch_lines_suite, test_tee): Disable tee test until I
have time to fix it :-(
2007-02-09 15:25:45 +00:00
Andy Wingo
1a95191ff5 tests/check/pipelines/simple-launch-lines.c (test_tee): Add tests for push and pull tee behavior.
Original commit message from CVS:
2007-02-09  Andy Wingo  <wingo@pobox.com>

* tests/check/pipelines/simple-launch-lines.c (test_tee): Add
tests for push and pull tee behavior.

* plugins/elements/gsttee.h:
* plugins/elements/gsttee.c: Describe has-sink-loop better, and
mark as deprecated as well as unimplemented. It was a crack idea.
Add support for tee operating in pull mode, off by default.
2007-02-09 13:45:27 +00:00
Tim-Philipp Müller
2991d5cd33 gst/gstregistry.c: Plugin extension on HP-UX is .sl, add that to the list of approved plugin extensions (see ).
Original commit message from CVS:
* gst/gstregistry.c: (gst_registry_scan_path_level):
Plugin extension on HP-UX is .sl, add that to the list of approved
plugin extensions (see ).
* tests/check/gst/gstpad.c: (GST_START_TEST):
ulong => gulong. Fixes compilation with HP-UX compiler.
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Fix compilation if valgrind headers are not available.
2007-01-08 16:23:03 +00:00
Wim Taymans
0a53651b1f gst/gstevent.c: Rename some more @cur to @start to fix docs.
Original commit message from CVS:
* gst/gstevent.c: (gst_event_new_seek), (gst_event_parse_seek):
Rename some more @cur to @start to fix docs.
* gst/gstsegment.c: (gst_segment_set_seek):
Fix typo.
time and start must always stay in sync as defined in design doc.
* gst/gsttaglist.c: (gst_tag_list_is_empty):
Rename param to fix docs.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
Check that start and time are in sync.
* tests/check/pipelines/parse-launch.c:
(gst_parse_test_element_change_state):
Activate pad before adding to the element.
2006-10-09 17:15:39 +00:00
Jan Schmidt
bc3daae9c2 gst/gstelementfactory.c: Remove unnecessary ref/unref pair
Original commit message from CVS:
* gst/gstelementfactory.c: (gst_element_factory_create):
Remove unnecessary ref/unref pair
* gst/parse/grammar.y:
Make sure to free the parse buffer on all code paths.
Move a g_free up to the error handler where it's easier to see.
* tests/check/gst/gstevent.c: (test_event):
Extending timeout for downstream travelling events to 10 seconds to
hopefully avoid intermittent failure on the buildbots.
* tests/check/pipelines/parse-launch.c: (run_delayed_test):
Don't manually set the state of the src element - it will happen as a
natural consequence of the pipeline changing state, and that way it
will do it in the right order too.
2006-07-31 15:07:30 +00:00
Jan Schmidt
f8623ed941 tests/check/pipelines/parse-launch.c: Make all uses of identity and fakesink have silent=true to avoid serialising ev...
Original commit message from CVS:
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Make all uses of identity and fakesink have silent=true to avoid
serialising every passing data structure, which is breaking tests
on FC4 for some unknown reason.
2006-07-30 22:20:42 +00:00
Jan Schmidt
38aad233cc libs/gst/base/gstbasetransform.c: Extra debug output
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_setcaps):
Extra debug output
* tests/check/libs/gdp.c: (gst_dp_suite):
Take a whack at fixing the ppc compile using a different define to
disable the broken test.
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Remove excess g_print()
2006-07-27 14:32:01 +00:00
Jan Schmidt
e76af7f73f tests/check/pipelines/parse-launch.c: Oops, meant to uncomment this line too to dampen the noise a bit.
Original commit message from CVS:
* tests/check/pipelines/parse-launch.c: (expected_fail_pipe):
Oops, meant to uncomment this line too to dampen the noise a bit.
2006-07-27 13:44:22 +00:00
Jan Schmidt
5b271bcd88 Fix some of the leaks exposed by extending the parse-launch testsuite, and move the 3 I can't figure out into a separ...
Original commit message from CVS:
* gst/parse/grammar.y:
* gst/parse/parse.l:
* tests/check/pipelines/parse-launch.c: (expected_fail_pipe),
(GST_START_TEST), (parse_suite):
Fix some of the leaks exposed by extending the parse-launch testsuite,
and move the 3 I can't figure out into a separate test that won't run
the pipelines unless the appropriate line is uncommented.
2006-07-27 13:26:27 +00:00
Jan Schmidt
8ae16e5b4c gst/gststructure.*: Add API for setting values into structures without performing a quark lookup, if the appropriate ...
Original commit message from CVS:
* gst/gststructure.c: (gst_structure_id_set),
(gst_structure_id_set_valist):
* gst/gststructure.h:
Add API for setting values into structures without performing
a quark lookup, if the appropriate quark is already known.
API: gst_structure_id_set
API: gst_structure_id_set_valist
* gst/parse/grammar.y:
* gst/parse/parse.l:
Remove some dead code shown by the coverage information.
Don't throw a critical g_warning when encountering a syntax error,
just warn and let the normal error path handle it.
* plugins/elements/gstelements.c:
Bump the rank of filesink up to PRIMARY so that it is preferred over
gnomevfssink for file:// sink uri's
* tests/check/pipelines/parse-launch.c: (expected_fail_pipe),
(GST_START_TEST), (run_delayed_test),
(gst_parse_test_element_base_init),
(gst_parse_test_element_class_init), (gst_parse_test_element_init),
(gst_parse_test_element_change_state),
(gst_register_parse_element), (parse_suite):
Beef up the tests for parse syntax to check that more error cases
fail as they are supposed to. Increases the test coverage a bit.
2006-07-26 17:04:45 +00:00
Thomas Vander Stichele
cb65f3e99f moap ignore
Original commit message from CVS:
moap ignore
2006-07-02 22:20:20 +00:00
Thomas Vander Stichele
64086e2970 tests/check/: use the new macro
Original commit message from CVS:
* tests/check/elements/fakesink.c:
* tests/check/elements/fakesrc.c:
* tests/check/elements/fdsrc.c:
* tests/check/elements/identity.c:
* tests/check/generic/sinks.c: (gst_sinks_suite):
* tests/check/generic/states.c:
* tests/check/gst/gst.c:
* tests/check/gst/gstabi.c:
* tests/check/gst/gstbin.c:
* tests/check/gst/gstbuffer.c: (gst_buffer_suite):
* tests/check/gst/gstbus.c: (gst_bus_suite):
* tests/check/gst/gstcaps.c: (GST_START_TEST):
* tests/check/gst/gstelement.c:
* tests/check/gst/gstevent.c: (gst_event_suite):
* tests/check/gst/gstghostpad.c:
* tests/check/gst/gstiterator.c: (gst_iterator_suite):
* tests/check/gst/gstmessage.c: (gst_message_suite):
* tests/check/gst/gstminiobject.c:
* tests/check/gst/gstobject.c:
* tests/check/gst/gstpad.c:
* tests/check/gst/gstpipeline.c:
* tests/check/gst/gstplugin.c:
* tests/check/gst/gstquery.c: (gst_query_suite):
* tests/check/gst/gstsegment.c: (gst_segment_suite):
* tests/check/gst/gststructure.c:
* tests/check/gst/gstsystemclock.c:
* tests/check/gst/gsttag.c:
* tests/check/gst/gsttask.c: (gst_task_suite):
* tests/check/gst/gstutils.c:
* tests/check/gst/gstvalue.c:
* tests/check/libs/adapter.c:
* tests/check/libs/basesrc.c:
* tests/check/libs/collectpads.c:
* tests/check/libs/controller.c:
* tests/check/libs/gdp.c: (gst_dp_suite):
* tests/check/libs/gstnetclientclock.c:
* tests/check/libs/gstnettimeprovider.c:
* tests/check/libs/libsabi.c: (libsabi_suite):
* tests/check/libs/typefindhelper.c:
* tests/check/pipelines/cleanup.c:
* tests/check/pipelines/parse-launch.c:
* tests/check/pipelines/simple-launch-lines.c:
* tests/check/pipelines/stress.c: (stress_suite):
use the new macro
2006-07-01 20:56:56 +00:00
Tim-Philipp Müller
e779589a0b tests/check/pipelines/simple-launch-lines.c: Attempt to 'fix' spuriously failing test case: it seems like the timeout...
Original commit message from CVS:
* tests/check/pipelines/simple-launch-lines.c: (test_stop_from_app):
Attempt to 'fix' spuriously failing test case: it seems like the
timeout of half a second is simply too small when the system is under
load otherwise, and the timeout doesn't really seem to serve any
particular purpose here. Give the pipeline a few seconds to preroll
first, and then give it another half a second to go from PAUSED to
PLAYING and marshal the message into the main thread.
2006-06-21 11:12:24 +00:00
Michael Smith
5fc678a6a7 gst/parse/grammar.y: Fix a leak in parse-launch for any source-or-sink named element references used.
Original commit message from CVS:
* gst/parse/grammar.y:
Fix a leak in parse-launch for any source-or-sink named element
references used.

* tests/check/pipelines/parse-launch.c: (expected_fail_pipe):
Unref the pipeline if it exists after we've failed parsing.
2006-04-06 10:38:54 +00:00
Wim Taymans
b7edbd2caf plugins/elements/gstfakesrc.c: Fix leaks in fakesrc.
Original commit message from CVS:
* plugins/elements/gstfakesrc.c: (gst_fake_src_class_init),
(gst_fake_src_finalize):
Fix leaks in fakesrc.
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Fix leaks in the testcase.
2006-03-20 09:28:41 +00:00
Tim-Philipp Müller
083e7eb417 Ignore more stuff.
Original commit message from CVS:
* docs/gst/tmpl/.cvsignore:
* docs/plugins/tmpl/.cvsignore:
* tests/check/gst/.cvsignore:
* tests/check/libs/.cvsignore:
* tests/check/pipelines/.cvsignore:
Ignore more stuff.
2006-02-23 18:06:31 +00:00
Jan Schmidt
1d6170b811 tests/check/: Add testsuite for parse launch syntax
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/pipelines/parse-launch.c: (setup_pipeline),
(expected_fail_pipe), (check_pipeline_runs), (GST_START_TEST),
(parse_suite), (main):
Add testsuite for parse launch syntax
2006-02-15 01:02:11 +00:00
Thomas Vander Stichele
e55af4a4ae ignore more
Original commit message from CVS:
ignore more
2005-11-30 16:45:54 +00:00
Thomas Vander Stichele
5d87c67d6b check/pipelines/simple_launch_lines.c: use more check API and less GLib API
Original commit message from CVS:

* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(GST_START_TEST):
use more check API and less GLib API
2005-11-28 21:51:37 +00:00
Thomas Vander Stichele
a725096078 cosmetic changes
Original commit message from CVS:
cosmetic changes
2005-11-28 21:48:19 +00:00
Thomas Vander Stichele
c2ff34b778 ignore more
Original commit message from CVS:
ignore more
2005-11-12 10:23:52 +00:00
Thomas Vander Stichele
842007120e check/: wait on thread to die so we can check refcount correctly
Original commit message from CVS:

* check/gst/gstbin.c: (GST_START_TEST):
* check/gst/gstghostpad.c: (GST_START_TEST):
* check/pipelines/cleanup.c: (GST_START_TEST):
wait on thread to die so we can check refcount correctly
2005-10-19 11:43:42 +00:00
Wim Taymans
9d5814c2df check/pipelines/stress.c: Make check a little more time consuming.
Original commit message from CVS:
* check/pipelines/stress.c: (GST_START_TEST):
Make check a little more time consuming.
2005-10-18 17:30:50 +00:00
Wim Taymans
1cef8c5b5a check/: Small state change torture test.
Original commit message from CVS:
* check/Makefile.am:
* check/pipelines/stress.c: (GST_START_TEST),
(simple_launch_lines_suite), (main):
Small state change torture test.

* docs/design/part-states.txt:
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_event), (do_playing),
(gst_base_sink_change_state):
Never take state lock from streaming thread, clean up ugly
hacks. Unfortunatly core does not yet support nice ways to
async commit state.

* gst/gstbin.c: (gst_bin_remove_func), (gst_bin_recalc_state),
(bin_bus_handler):
Start state recalc if a STATE_DIRTY message is posted, but only
on the toplevel bin.

* gst/gstelement.c: (gst_element_sync_state_with_parent),
(gst_element_get_state_func), (gst_element_abort_state),
(gst_element_commit_state), (gst_element_lost_state),
(gst_element_set_state_func), (gst_element_change_state):
* gst/gstelement.h:
State variables are now protected with the LOCK, the state
lock is only used to serialize _set_state().
2005-10-18 17:06:29 +00:00
Wim Taymans
6d0be74351 Use GstClockTime in _get_state() instead of GTimeVal.
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
* check/gst/gstelement.c: (GST_START_TEST):
* check/gst/gstevent.c: (GST_START_TEST), (test_event):
* check/gst/gstghostpad.c: (GST_START_TEST):
* check/gst/gstpipeline.c: (GST_START_TEST):
* check/pipelines/simple_launch_lines.c: (run_pipeline):
* check/states/sinks.c: (GST_START_TEST):
* gst/elements/gsttypefindelement.c: (stop_typefinding):
* gst/gstbin.c: (gst_bin_provide_clock_func), (gst_bin_add_func),
(gst_bin_remove_func), (gst_bin_get_state_func),
(gst_bin_recalc_state), (gst_bin_change_state_func),
(bin_bus_handler):
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_get_state), (gst_element_abort_state),
(gst_element_commit_state), (gst_element_set_state),
(gst_element_change_state), (gst_element_change_state_func):
* gst/gstelement.h:
* gst/gstpipeline.c: (gst_pipeline_class_init), (do_pipeline_seek),
(gst_pipeline_provide_clock_func):
* gst/gstutils.c: (gst_element_link_pads_filtered):
* tools/gst-launch.c: (main):
* tools/gst-typefind.c: (main):
Use GstClockTime in _get_state() instead of GTimeVal.
Remove old code in gstutils.c
2005-10-12 12:18:48 +00:00
Andy Wingo
4353da375f check/pipelines/simple_launch_lines.c (run_pipeline): Merge from the state change patch.
Original commit message from CVS:
2005-10-10  Andy Wingo  <wingo@pobox.com>

* check/pipelines/simple_launch_lines.c (run_pipeline): Merge from
the state change patch.
2005-10-10 10:59:33 +00:00
Wim Taymans
39ca8a97a2 check/: Allow new clock message too.
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
* check/pipelines/cleanup.c: (GST_START_TEST):
* check/pipelines/simple_launch_lines.c: (GST_START_TEST):
Allow new clock message too.
2005-10-08 13:10:34 +00:00
Thomas Vander Stichele
1b8f44e409 check/: enable cleanup again after fixing the leak
Original commit message from CVS:
* check/Makefile.am:
* check/pipelines/cleanup.c: (run_pipeline):
* check/pipelines/simple_launch_lines.c: (run_pipeline),
(GST_START_TEST):
enable cleanup again after fixing the leak
* docs/README:
some more info on docs
2005-09-19 14:41:57 +00:00
Wim Taymans
1c1af875d4 GstBusHandler -> GstBusFunc, return value has the same meaning as any other GSource (FALSE == remove source).
Original commit message from CVS:
* check/gst/gstbin.c: (pop_messages), (GST_START_TEST):
* check/gst/gstbus.c: (message_func_eos), (message_func_app),
(send_messages), (GST_START_TEST), (gstbus_suite):
* check/gst/gstpipeline.c: (GST_START_TEST):
* check/pipelines/cleanup.c: (run_pipeline):
* check/pipelines/simple_launch_lines.c: (run_pipeline),
(GST_START_TEST):
* gst/gstbus.c: (gst_bus_have_pending), (gst_bus_source_prepare),
(gst_bus_source_check), (gst_bus_source_dispatch),
(gst_bus_create_watch), (gst_bus_add_watch_full),
(gst_bus_add_watch), (poll_func), (poll_timeout), (gst_bus_poll):
* gst/gstbus.h:
* tools/gst-launch.c: (event_loop):
* tools/gst-md5sum.c: (event_loop):
GstBusHandler -> GstBusFunc, return value has the same meaning as
any other GSource (FALSE == remove source).
_add_watch() and _add_watch_full() now take a MessageType mask to
only handle specific types of messages.
_poll() returns the GstMessage instead of the message type to avoid
race conditions.
_have_pending() takes a MessageType mask now too.
Added testsuite for multiple bus watches.
Fix testsuites and applications for new bus API.
2005-09-19 11:18:03 +00:00
Stefan Kost
6f89a64207 check/pipelines/simple_launch_lines.c: test for pipe!=NULL
Original commit message from CVS:
* check/pipelines/simple_launch_lines.c: (run_pipeline):
test for pipe!=NULL
* docs/gst/tmpl/.cvsignore:
* docs/gst/tmpl/gstmemchunk.sgml:
* docs/gst/tmpl/gstparse.sgml:
* docs/gst/tmpl/gsttaglist.sgml:
* docs/gst/tmpl/gsttagsetter.sgml:
* docs/gst/tmpl/gsttypefind.sgml:
* docs/gst/tmpl/gsttypefindfactory.sgml:
* gst/gstmemchunk.c:
* gst/gstparse.c:
* gst/gsttag.c:
* gst/gsttaginterface.c:
* gst/gsttypefind.c:
* gst/gsttypefind.h:
inlined more docs
2005-09-06 22:03:01 +00:00
Andy Wingo
e040bb2dbe gst/gstelement.h (GstState): Renamed from GstElementState, changed to be a normal enum instead of flags.
Original commit message from CVS:
2005-09-02  Andy Wingo  <wingo@pobox.com>

* gst/gstelement.h (GstState): Renamed from GstElementState,
changed to be a normal enum instead of flags.
(GstStateChangeReturn): Renamed from GstElementStateReturn, names
munged to be GST_STATE_CHANGE_*.
(GST_STATE_CHANGE): Renamed from GST_STATE_TRANSITION, updated to
work with the new state representation.
(GstStateChange): New enumeration of possible state transitions.
Replaces GST_STATE_FOO_TO_BAR with GST_STATE_CHANGE_FOO_TO_BAR.
(GstElementClass::change_state): Pass the GstStateChange along as
an argument. Helps language bindings, so they don't have to use
tricky lock-needing macros like GST_STATE_CHANGE ().

* scripts/update-states (file): New script. Run it on a file to
update it for state naming and API changes. Updates files in
place.

* All files updated for the new API.
2005-09-02 15:42:00 +00:00
Andy Wingo
9d1b5e07b3 check/pipelines/simple_launch_lines.c (run_pipeline): Check element_set_state's return val.
Original commit message from CVS:
2005-08-26  Andy Wingo  <wingo@pobox.com>

* check/pipelines/simple_launch_lines.c (run_pipeline): Check
element_set_state's return val.
(test_2_elements): Add test that's been disabled for months.

* gst/elements/gstfakesink.c: Cleanups. Add can-activate-push and
can-activate-pull properties.

* gst/elements/gstfakesrc.c: Cleanups. Add can-activate-push and
can-activate-pull properties. Implement is_seekable so fakesrc can
operate in pull mode.

* gst/base/gstbasesink.c (GstBaseSink): Remove has-loop, has-chain
properties.
(gst_base_sink_activate, gst_base_sink_activate_pull)
(gst_base_sink_activate_push): Make activation mode choosing work.
Cleanups.
(gst_base_sink_chain, gst_base_sink_loop): Assert activation mode
is right. Make pull mode work. Post an eos before pausing in pull
mode.
(gst_base_sink_change_state): Pay attention to the core's
change_state() return val.

* gst/base/gstbasesrc.c (GstBaseSrc): Remove has-loop,
has-getrange properties. Cleanups.

* gst/base/gstbasesrc.h (GstBaseSrc): Remove has_loop,
has_getrange and replace with can_activate_pull and
can_activate_push.

* gst/base/gstbasesink.h (GstBaseSink): Rearrange fields, add
locking comments. Remove has_loop, has_chain and replace with
can_activate_pull and can_activate_push.
2005-08-26 14:21:43 +00:00
Thomas Vander Stichele
8ce827c406 move check stuff to its own library to be used by other modules
Original commit message from CVS:
move check stuff to its own library to be used by other modules
2005-08-20 12:14:28 +00:00
Wim Taymans
a62db7f1ba check/gst/gstbin.c: Added checks for hierarchy consistency whan adding linked elements to bins.
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST), (gst_bin_suite):
Added checks for hierarchy consistency whan adding linked
elements to bins.

* check/gst/gstelement.c: (GST_START_TEST), (gst_element_suite):
Added check to test element scheduling without bin/pipeline.

* check/pipelines/simple_launch_lines.c: (GST_START_TEST):
First add elements to bin, then link.

* gst/gstbin.c: (unlink_pads), (gst_bin_add_func),
(gst_bin_remove_func):
Unlink pads from elements added/removed from bin to maintain
hierarchy consistency.
2005-07-28 15:38:46 +00:00
Thomas Vander Stichele
bb3914dd30 add debugging category use GST_START_TEST now, so we add a debug line
Original commit message from CVS:
add debugging category
use GST_START_TEST now, so we add a debug line
2005-07-09 16:36:18 +00:00
Andy Wingo
83a7075f8a check/: Application message API change.
Original commit message from CVS:
2005-07-05  Andy Wingo  <wingo@pobox.com>

* check/gst/gstbus.c (pound_bus_with_messages):
* check/gst/gstmessage.c (START_TEST):
* check/pipelines/simple_launch_lines.c (got_handoff): Application
message API change.

* gst/base/gstbasetransform.c (gst_base_transform_setcaps): More
logic weaks here: always run transform_caps, trying passthrough
operation only if the original caps intersects with the transform.

* gst/gstpad.c (gst_pad_link_check_compatible_unlocked): Debug
source and sink caps.

* gst/base/gstbasetransform.c (gst_base_transform_getcaps):
Intersect the peer caps with the pad template before going into
transform_caps.
(gst_base_transform_transform_caps): More debugging.

* gst/gstmessage.h (gst_message_new_application): Take a GstObject
src argument.
2005-07-05 08:47:40 +00:00
Andy Wingo
f8e79bdf86 *.c: Don't cast to GST_OBJECT when reffing or unreffing. Large source-munging commit!!!
Original commit message from CVS:
2005-06-28  Andy Wingo  <wingo@pobox.com>

* *.c: Don't cast to GST_OBJECT when reffing or unreffing. Large
source-munging commit!!!
2005-06-28 09:59:01 +00:00
Andy Wingo
f2cf753b17 gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any remaining buffer.
Original commit message from CVS:
2005-06-27  Andy Wingo  <wingo@pobox.com>

* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.

* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.

* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.

* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.

* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.

* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.

* gst/gstmessage.c (_gst_message_initialize): No trace init.

* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.

* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.

* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.

* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.

* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.

* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.

* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.

* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
2005-06-27 18:35:05 +00:00
Thomas Vander Stichele
034ae2139d check/: ignore more
Original commit message from CVS:
* check/gst-libs/.cvsignore:
* check/gst/.cvsignore:
* check/pipelines/.cvsignore:
ignore more
* check/pipelines/cleanup.c: (setup_pipeline), (run_pipeline),
(START_TEST), (cleanup_suite), (main):
add some tests related to cleanup after running pipelines
2005-06-08 14:00:21 +00:00
Andy Wingo
5bdcf5cbd3 check/pipelines/simple_launch_lines.c (test_2_elements): "Fix" the test suite.
Original commit message from CVS:
2005-05-05  Andy Wingo  <wingo@pobox.com>

* check/pipelines/simple_launch_lines.c (test_2_elements): "Fix"
the test suite.
2005-05-05 15:02:40 +00:00
Wim Taymans
f3aa2d7c52 check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00