Commit graph

115 commits

Author SHA1 Message Date
Wim Taymans
cd24b35b70 Added pullregion in again, it got removed with the previous commit.
Original commit message from CVS:
Added pullregion in again, it got removed with the previous commit.
2000-12-08 18:24:16 +00:00
Erik Walthinsen
04c360e39f Changed the way things are scheduled, especially sources. A Src used to have a push() function, and optionally a pus...
Original commit message from CVS:
Changed the way things are scheduled, especially sources.  A Src used to
have a push() function, and optionally a pushregion() to deal with async
reads, etc.  That whole thing has gone away, in favor of providing a
pull() function for the output (Src) pad instead, ala chain functions.
This makes constructing cothreaded schedules out of non-loop elements
somewhat easier.  Basically there was always a question as to which pad
was being dealt with.  In the pullregion case, cothread-specific data was
used to try to pass the region struct to the right place, which is a slow
hack.  And in general, the push function severely limited the kind of
tricks that could be played when there's more than one output pad, such as
a multi-out file reader with async capabilities on each pad independently.

This changes the way cothread scheduling occurs.  Instead of the hack to
deal with Src's by calling their push() function (or optionally the
pushregion(), in certain cases), we now are working towards a general
mechanism where pads are the only thing that are dealt with directly.

An optimization was made in the process of doing this: the loopfunction
actually run as the outer [stack] frame of the cothread is now set more
intelligently in create_plan() based on what kind of element it is.  We
now have:

loopfunc_wrapper: used for loop-based elements, it simply calls the
loopfunc in a loop, paying attention to COTHREAD_STOPPING (see
below).  It currently does other, soon to be depracated, stuff.

pullsrc_wrapper: wraps a Src that's not loop-based (since your options
are now loop- or pull-based)

There will be a couple more to deal with other cases, such as Connections
and chain-based elements.  The general idea is that it's a lot more
efficient to make the decisions once in create_plan than to keep doing
this huge if/else chain in the wrapper.  Just choose the right wrapper up
front.  It'll be most apparent performance-wise in the case of whichever
element context is switched to first for each iteration, since the whole
wrapper setup is done for every iteration.

The tricky part is that there is now a bit of overloading of the function
pointers in a pad.  The current meanings (possibly to change a bit more
soon) are:

chainfunc: as always, chainfunc pointer is mirrored between peer pads
(this may change, and the chain func may end up in pushfunc)
pushfunc: SrcPad: gst_pad_pushfunc_proxy, cothread_switch to peer
SinkPad: none (may take over chainfunc, see below) pullfunc:
SrcPad: Src or Connection's function to construct buffers
SinkPad: gst_pad_pullfunc_proxy, cothread_switch to peer

There are a number of issues remaining with the scheduling, not the least
of which is the fact that Connections are still dealt with the old way,
with _push() functions and such.  I'm trying to figure out a way to unify
the system so it makes sense.  Following the scheduling system is hard
enough, trying to change it is murder.


Another useful scheduling addition, mentioned above, is COTHREAD_STOPPING.
It's an element flag that's used to signal whatever code is running in
cothread context that it should be finishing up and exiting soon.  An
example of this is in plugins/cobin/spindentity.c.  All the loops should
now be composed of do/while loops, rather than while(1) loops:

do {
buf = gst_pad_pull(spindentity->sinkpad);
gst_pad_push(spindentity->srcpad,buf);
} while (!GST_ELEMENT_IS_COTHREAD_STOPPING(element));

The reason for this is that COTHREAD_STOPPING may be set before the above
loop ever gets started.  It wouldn't do for the body of the loop to never
once get called, that would simply stall the pipeline. Note that only the
core library code is ever responsible for setting and unsetting this flag.
All elements have to do is respond to it by cleanly exiting the loop and
the function holding it.

This is needed primarily to allow iterations to occur properly.
Basically, there's a single entry point in the cothread scheduling loop,
gst_bin_iterate_func() simply switches to this cothread.  If the element
in this context is allowed to loop infinitely, nothing would even switch
back to the context from which the iterate() was originally called.  This
is a bit of a problem.  The solution is for there to be an implicit switch
back to the originating context.  Now, even I'm not sure exactly how this
works, but if the cothread that's switched to actually returns, execution
returns back to the calling context, i.e. iterate_func().

COTHREAD_STOPPING is therefore set just before switching into this
(currently randomly chosen) context, on the assumption that it will return
promptly after finishing its duties.  The burden of clearing the flag
falls to the various wrapper functions provided by the Bin code, thus
element writers don't have to worry about doing that at all (and simply
shouldn't).


Related changes:
All the sources in elements/ have been changed to reflect the new system.


FIXMEs:
1) gstpipeline.c calls gst_src_push at some point, dunno why, it's
commented out now.
2) any other sources, including vcdsrc, dvdsrc, and v4lsrc will break
badly and need to be modified to work as pull-based sources.
2000-12-04 10:52:30 +00:00
Wim Taymans
4f55ae4ded Added multiple types to the pads.
Original commit message from CVS:
Added multiple types to the pads.
Added first preview of the capabilities system.
Autoplugging is seriously broken with these (and other) changes.
2000-12-03 17:51:29 +00:00
Erik Walthinsen
726f7d36dc added the ability to disable pads, not quite complete but sufficient for now
Original commit message from CVS:
added the ability to disable pads, not quite complete but sufficient for now
2000-11-25 07:02:55 +00:00
Wim Taymans
415ced1c0b Added seeking to the avi decoder by implementing pull_region.
Original commit message from CVS:
Added seeking to the avi decoder by implementing pull_region.
Fixes to the asyncdisksrc.
Added thread specific data to the cothreads.
2000-11-06 00:15:51 +00:00
Wim Taymans
9500bd2128 Code cleanup, make it adhere to the Gnome/Gtk+ code formatting, which is quite clean and more readable.
Original commit message from CVS:
Code cleanup, make it adhere to the Gnome/Gtk+ code formatting, which is
quite clean and more readable.
Renamed parseavi to avidecoder
Implemented seeking/time display/pause/play/stop/clean exit to gstmediaplay
Added an element flag to indicate that it cannot deal with noncontigous
buffers. If such an element is found in the pipeline, seeking is disabled
for the complete stream (avidecoder cannot deal with seeking until we convert
it to a loop based element with pull_region to fetch the indeces etc...)
2000-11-01 13:49:41 +00:00
Wim Taymans
2521a319c3 MPEG2 types added for better autoplugging. MPEG2 works more or less. fix in autoplugging. avi now works.
Original commit message from CVS:
MPEG2 types added for better autoplugging. MPEG2 works more or less.
fix in autoplugging. avi now works.
2000-10-21 12:04:40 +00:00
Wim Taymans
4e7f031df7 Loading and saving of XML pipeline descriptions.
Original commit message from CVS:
Loading and saving of XML pipeline descriptions.
GladeXML like operation implemented (you can retrieve parts of a pipeline)
2000-09-27 19:33:10 +00:00
Erik Walthinsen
b6d31c1c72 Megapatch, changes which states are available, how they're used, and how they're set. Also modifies the scheduling s...
Original commit message from CVS:
Megapatch, changes which states are available, how they're used, and how
they're set.  Also modifies the scheduling system, breaking pulled
buffers.  Check mail archives for more details.
2000-07-17 17:14:15 +00:00
Wim Taymans
9920b88c3f This is the audio/video sync release.
Original commit message from CVS:
This is the audio/video sync release.
Changed the mpegvideoparser to parse complete pictures. Added the PTS
timestamps to the pictures.
Added PTS timestamps to the MPEG audio frames.
Made the clock a littlebit better.
Gstplay now uses two more threads one for video, one for audio playback.
Added the first QoS callbacks for the pads.
hopefully fix an mmx compilation problem.
2000-07-12 22:52:42 +00:00
Wim Taymans
a3d5d3a62b Switched Cr and Cb in YUV2RGB fixed the avi parser (gstriff had wrong size) the system_encoder can now do video only ...
Original commit message from CVS:
Switched Cr and Cb in YUV2RGB
fixed the avi parser (gstriff had wrong size)
the system_encoder can now do video only system streams
sanitized the colorspace and scaler api.
added fast self modifying asm scaler.
worked on the typefind stuff.
added a cool media player (gstplay) it uses the typefinder to playback
avi, mpeg1 (system and video) streams. It is also a testbed and a real app.
2000-06-25 21:38:00 +00:00
Wim Taymans
bf8c785fb0 Documentation updates. All standard library objects and standard elements are documented. Modified some of the elemen...
Original commit message from CVS:
Documentation updates. All standard library objects and standard
elements are documented. Modified some of the elements to more
accuratly report about their arguments so the documentation builds
more reasonable output.
Added aviencoder and jpegencoder elements (not working yet)
2000-03-27 19:53:43 +00:00
Wim Taymans
ef63c32778 This is a rather large patch. Switched on -Wall compiler flag and fixed the warnings.
Original commit message from CVS:
This is a rather large patch. Switched on -Wall compiler flag and fixed
the warnings.
Made the Video for Linux more like it should be.
2000-02-27 23:18:38 +00:00
Wim Taymans
c144819530 Added a pull function in the gstpad. Modified the videosink to implement the pull. This function allows a source elem...
Original commit message from CVS:
Added a pull function in the gstpad. Modified the videosink to implement
the pull. This function allows a source element to request a buffer
from the destination. This is much more efficient because the
videosink can then pass a buffer with SHM to the element, which does
not require an aditional memcpy.
removed scaling from the videosink. I need something better.
2000-02-26 18:55:14 +00:00
Erik Walthinsen
1762dfbf98 initial checkin
Original commit message from CVS:
initial checkin
2000-01-30 09:03:00 +00:00